Hidden Rectangle Causing Blank Page.
Sep 21, 2007
Hello all,
I'm running into an issue with a report we have, I was hoping you may be able to help...
We have a report that contains a rectangle which has conditional visiblity. When the expression evaluates to true, the contents of the rectangle are indeed "hidden", but we are seeing a blank page.
The rectangle does NOT have page breaks selected before or after it. (and neither does the objects before or after that rectangle.)
Any ideas?
View 1 Replies
ADVERTISEMENT
Jul 11, 2006
I have been trying for some time to create a columnar report where certain columns can be hidden as requested by the user. I have tried placing the complete column set in the report, and then hiding a subset of columns, but blank pages are produced when rendered to PDF since the report body does not appear to shrink as columns are hidden and justify themselves to the left. I have tried a table, list, and matrix to no avail...
Does anyone know of a workaround, a trick, or even a hack that may accomplish what I am after?
Thanks.
View 3 Replies
View Related
Dec 26, 2007
We are using SSRS 2005.We designed one report.This report contains Table and chart controls .When Table is hidden,chart only is visible, this chart is going to show only on last page.There is a white space in top of the chart while hiding the table control.
Consider for an Example Report one tables and one chart . We want to show only chart,So we made Table's visible property is false.Total Number of pages is five and table has only four pages and chart has only one page that is in last page. Now the report showing Four pages are empty with header and footer and last page have a chart with header and footer.
Any suggestions how to avoid the empty pages?
I tried to Filter property to filter the table.Same empty page with header and footer is only visible
Thanks In Advance
Mugesh
View 8 Replies
View Related
Apr 1, 2008
Hi,
I want to dynamically handle page breaks in a report based on which subreports that are included in the total report. Which subreports that should be included is controlled through use of parameters. My problem is the following:
I use a rectangle on which I have set the page break property. If I explicitly set the visiblity on the rectangle to true, the page break is performed. If I set the visiblity to hidden, the page break is disregarded. All this is fine with me and according to how I think it should behave. Though, if I use an expression to toggle the true and false on the visiblity, the same behaviour could not be performed. I cannot figure out why. Anyone that can help me with this? I thought that the expression "=true" should be equal to Visible. What am I missing?
Best regards
Lars
View 5 Replies
View Related
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
Apr 15, 2008
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
View 8 Replies
View Related
Jan 23, 2008
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
View 6 Replies
View Related
Jul 25, 2006
W2k3 server, SQL 2005.
@@version = Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Standard Edition on Windows NT 5.2
(Build 3790: Service Pack 1)
I have my first SSIS package almost working, but I'm having an odd problem and can't find any information to help resolve it.
I'm importing from a flat file (csv) to an existing table (append). I've got a Derived Column transformation in the middle to do some data cleanup. It's all working except for one little problem...
One of the transformations is 'REPLACE([Column 3],"^","; ")', output to a new column. (The input file has a field that uses carets as delimiters between an unknown number of items; I'm changing that to semicolons for easier reading.) Not all rows have data in this column, some will have one item, some will have multiple items.
The REPLACE works except that it fills in repeated data for all the blank rows.
Example:
Incoming data is:
1 Smith,Jane^Jones,Jane
2 Brown,John
3
4 Adams,James^Adams,Jim
5
6 White,Debra
Data inserted into the table is:
1 Smith,Jane; Jones,Jane
2 Brown,John
3 Brown,John
4 Adams,James; Adams,Jim
5 Adams,James; Adams,Jim
6 White,Debra
I've tried to use a Conditional to skip the empty rows, but I can't get that working at all (get syntax errors no matter what I put in).
Any suggestions on how to fix this would be most appreciated!
Thank you.
View 5 Replies
View Related
Mar 31, 2007
hi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
can u please help me out from this problem??
View 1 Replies
View Related
Nov 28, 2006
I am having an issue with page breaks on tables.
I have 2 tables that I have set to PageBreakOnStart. They have conditional visibility. What I am seeing is that if i put an item in ToggleItem, the page break functionality does not work anymore.
Is this by design? I would have expected the page break to be there if the item is visible, and not if it is hidden.
Any ideas?
Thanks!
BobP
View 8 Replies
View Related
Feb 23, 2007
I have a report that has 3 graphs and two tables that render to 5 pages in pdf. Some users should only get a subset of the 5 elements and some need all 5. When I set the Hidden property (in the designer or via a parameter) for any of the elements they become invisible but in pdf but the report still prints out a page for the hidden element. It works fine in the designer and rendered to html and excel but I get an extra page in pdf. it is like the hidden element still takes up the same amount of space but is just hidden.
Any help would be great.
Greg
View 2 Replies
View Related
Nov 21, 2007
Good Morning friends. I am using MS SQL Server Reporting Services version 9.00.2047.00 and I have a problem and i would like your help:
I have one report (Cuadro de Mando) and 4 subreports (subquadro, subquadro2, subquadro3, subquadro4):
Note: Nome of the subreports above, have a page break after showing the records and neither the report. The subreports are perfectly designed in the main report (Cuadro de Mando).
There is no space free between the desgin of the 4 subreports.
Each subreport are designed in only one page. I tested each one of the subreports individually and the preview of each is ok in olnly one page.
But when i test the report (€œCuadro de Mando€?) with contains the 4 subreports, one page in blank always appears between the previous page and the next page of the 4 subreports.
What can we do to solve this problem?
Thank you very much.
View 4 Replies
View Related
Mar 24, 2008
Hi there,
Could you please fill me in on some possible reasons and solutions as to why the report server home page appears blank?
Thanks!
View 5 Replies
View Related
Oct 25, 2007
is it possible for me to force a blank page after a group break?
thks
View 1 Replies
View Related
Mar 10, 2008
Hi,I am facing a problem with page breaking, I have PDF Reports,there i need to show particular data under one group ,when ever new group starts i need to show in new page,for this i took LIst Box Control, there i kept a Table.here the problem is In list Box Properties,i selected EDIT DETAILS GROUP, there i selected Page Break at End.Finally it is fine ;But giving page break when new group starts,at last it is giving Blank Page,any one can help me.......
View 5 Replies
View Related
Sep 13, 2007
Hello,
I am using the SQL Reporting services with SQL Server 2005. I am able to view my reports in the report manager however, when the report generates on my device it shows blank of 0 pages. I created a simple test report with just a header, company's logo and contact info and still no luck. I am using anoynomous user access and have given IUSR datareader access in SQL Server. Not sure where I am going wrong. I feel like I am so close...If someone out there had any success viewing reports on mobile device (WM5.0) and would be so kind to share their experience or knowledge, I would greatly appreciate it!
Thanks.
View 1 Replies
View Related
Aug 20, 2015
Given a model in Power Pivot with a number of KPIs that are hidden with the 'hide from client tools' option. After restoring the model in SSAS and connecting to the model from Excel, the KPIs are visible under a separate category/table "KPIs".
Other hidden items in the model like columns and measures remain invisible.
Is this normal behavior and what can I do about this?
View 2 Replies
View Related
Feb 13, 2007
I am a novice Visual Studio user. When creating reports in Visual Studio, I get an extra blank page with a report heading when I save the report as a .pdf and print from Adobe. I recently created a report with 2 grouping levels and I get 2 blank pages (w/report header only) between every full detail page. I've checked my report properties and grouping settting several times. I've also checked the properties for each of the lines defined in my report and nothing indicates that it would cause a problem. Note: My report consists of a header, a body with a table-header-detail-2 grouping levels-footer, and a report footer. I would REALLY appreciate any suggestions for solving my problem. Also, when I view the report on the Preview Pane it looks exactly as I would expect. The extra pages only appear when saving as a .pdf and printing from Adobe.:confused: :confused: :confused: :confused:
View 1 Replies
View Related
Mar 9, 2007
Hi all. My name is Guilherme and I'm a Braziliam software developer.
I've installed on my computer all the software required to work with MS SQL RS. I log on this computer using my domain user. and a few days ago i needed to change my password (network policy)
Now, when I open the adress http://localhost/reports on my computer, I can't see the installed reports, neither the configuration page.
What should I do?
Thanks in advance.
View 1 Replies
View Related
Jun 27, 2015
I can not access the url of reporting services.Reports_REPORTER, gives me a blank page.I tried to change service accountand plugged network services, but the same is not working.
View 2 Replies
View Related
Oct 18, 2007
All I see is:
SQL Server Reporting Services
Home
Home | My Subscriptions | Help
Anyone any ideas on how I get the rest of the page back?
If I go to the reports home page, I get:
Reporting Services Error
The permissions granted to user 'NT AUTHORITYIUSR' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
SQL Server Reporting Services
I'm using Vista Ultimate and SQL Server 9.0.3159.
View 6 Replies
View Related
May 8, 2015
I have created a report and convert it to PDF. Every other page on pdf is blank. I have checked the margin and could not fix on the report.
View 6 Replies
View Related
May 21, 2006
Hi,
I'm getting blank page when I open the Report Manager: I've got a header - "...Reporting... HOME", and then just empty space.
I had it working fine a week ago. Any ideas?
The RS runs on Win2003 Std, SQL 2005 Std.
Thanks
View 26 Replies
View Related
Feb 20, 2008
Hi,
I have report with a list and a table inside it.
I want each item of the list in a new page.
So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.
But printing or exporting the report, a blank page with just the header and the footer is printing.
Is there a way to remove this last extra blank page?
Thanks for your time.
Navya.
View 5 Replies
View Related
Nov 6, 2007
Hi,
When I Preview my report then it's fine only 2 pages with no blank page with header in between.
I then deploy it & open via web.
But when i export to PDF & print it pints 3 pages with the first being a blank page with header.
Any Idea what I'm doing wrong?
Regards,
View 2 Replies
View Related
Jun 30, 2015
I have the multiple pages with in the report. For Example,
1. Dashboard Page
2. Risk Summary Page
3. Issues Summary Page
4. Key Summary Page
Â
I am using the rectangle for the physical page break and set the page break option as "Add a page break after" for each rectangle except for the last key summary page in the RDL
Â
Other Report details
Report Paper Size is A4, Landscape, Width = 29.7cm, Height = 21cm
Report Margins - Left=0.2cm, Right=0.2cm, Top=0.25cm, Bottom=0.25cm
Â
Rectangle size in the report body in each page as
Width=28.7cm, Height=17.5cm,
Header Height= 2cm
Footer Height = 1cm
Â
Now, the issue is when I add the Tablix with the rectangle to display the details data, it also adds the blank page after the page and when I remove the Tablix and only keep the graphs within the rectangle then blank page issue get fixed.
View 2 Replies
View Related
Apr 18, 2008
I build a long report in sql reporting(5 pages)
It has many lists.
on the 3rd page it is inserting a blank page with just the report header
I check the list before and after the page
Insert Page break before and after is "unchecked" on both the list and its grouping.
Is there anything else I can verify to find a solution to print no blank pages. The client will have my head if it is there.
Nick
View 4 Replies
View Related
Jan 11, 2008
Hi,
My report page settings are as follows
page width 28cm
page height 21cm
all margins 1cm
My report when rendered to the screen outputs the correct number off pages...HOWEVER when i export it to adobe i get a trailing blank page which accompanies each page break.
Can anyone please help ?
My report has a table which is bounded to a list with separate fields at the top of the list specifying the username in a text field and the table displays the user details, For each user there is a page break.
I have notice when i got rid off the list everything is ok, however the list seems to be within the boundaries of the report
View 5 Replies
View Related
Sep 22, 2015
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app
2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown
3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
Tried restarting it; tried changing SPDistributedCacheClientSetting settings - requestTimeout, channelOpenTimeout... but didn't work.
I checked Event Viewer logs, SharePoint logs and SSRS logs but couldn't find any relevant error messages.
View 5 Replies
View Related
Dec 13, 2007
Hello:
I am running into an issue with RS2k PDF export.
Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
View 1 Replies
View Related
May 15, 2015
I am using SQL Server report 2008/2012 (SSRS) and my report viewer contains body content with 3 Row groups.
While printing the report, Â data print with blank space and move to continue data to next page.Â
Departure flight : 70 rows
First Page           : 42 rows printed
Second Page     : 23  rows printed  [ Supposed to be print 28 ,  if the total count of records more than 23 and less than 42 then the page print only 23 records ]
Third Page          : 5 rows printed
Departure flight : 42 Â rows
First Page           : 42  rows printed [Report max. record allowed to print 42 rows so if total record is 42 then print perfectly ]
Departure flight : 26 rows
First Page           : 23 rows printed [Supposed to be print 26, if the total count of records more than 23 and less than 42 then the page print only 23 records ]
Second Page     : 3 rows printed
View 3 Replies
View Related
Feb 15, 2007
Hello,
I have a group I'll call G4.
The header table row for G4 contains 3 textboxes containing the sums of the contents within G4. The header table row for G4 is visible while it's contents, including the G4 footer table row, is kept invisible until the report user drills down into the group.
When the report user drills down into G4 the footer table row becomes visible and the sums of the contents of the group are displayed for a second time.
At this point I want the sums in the header to be set to invisible when the sums in the footer are made visible by the drilldown.
When I try to reference the hidden property of textbox66 in the G4 footer in order to set the hidden property of header textbox57 in the G4 header I get to this point...
=IIF(reportitems!textbox66.
When it fails to give me an option of choosing the .Hidden property and instead only gives me a .Value.
If I complete the IIF statement manually so that it spells out .....
=IIF(ReportItems!Textbox66.Hidden = False, True, False)
...the report chokes on it.
So my question is, how do I reference the hidden property of one or more textboxes in a group to use as condition checks to set the hidden property of another textbox in that same group?
Thank you for any help you can provide. We are only now beginning to implement reporting services and I have not yet had the chance to research this in greater detail for lack of time.
View 1 Replies
View Related
Sep 21, 2007
Hello,
I have a rectangle which contains a chart. Most of the time, the chart has data, so the rectangle should be visible. Sometimes, however, the chart may have no data (zero records). In that case, I would like to hide the rectangle.
Is there any way to "query" data from the report's recordset to see if a certain condition is true.. if so, use that to control the visiblity of the rectangle?
I have one column in the recordset that has many values... the chart will only display data if certain values are returned in the recordset.
Thanks for your advice!
View 1 Replies
View Related
