Hide Cube Attriute Members Value In MDX Query For Report Parameter
Mar 4, 2008
Hi All,
how do i hide an attributes member value in all the reports where my cube is exposed as data source.
Example : Lets say i have dimension called Product.
Product
Name column Key column
Product A 0
Product B 1
Product C 2
Now i need to create mdx query which will fetch member values except 0 key column value so that member values except 0 Key would be loaded in the parameter list. What is the best query so that i will run in to any performance issues. Is there any cube level setting i can do so that i will be doing one time job ?
Can i use Key() function to compare something like Key([Product].[Product Name]) >0 in the mdx query
ot would Except() function would help?
I have requirement where first I need to show only one report parameter. Based on user selection I need to prompt or show the user another report parameter.
Say suppose I have 3 parameters. User selects first value in first parameter I should not show the other 2 parameters. If user selects second value in first parameter I should show second parameter and hide third parameter. There is no relationship between these 2 parameters except user selection. Similarly if user third value in first parameter then I should show third parameter and hide second parameter.
Is this possible? I can not see any Visible property for report parameters.
I am trying to report against a cube and I want the user to be able to choose the date for the report.
Now the cube dimension has been built against a calendar which contains values for the next 30 years(!) so when I create a parameterized report the list of dates is ridiculously huge.
I want to filter the dates out and show only the dates for which there is data. How do I filter out the list of dates for a parameter?
I'm using MS Report Designer 2005 and have created a report that uses a cube, with a dimension set up to convert null values to unknown (nullProcessing = UnknownMember).
When I create a parameter using the checkbox in the graphical design mode's filter pane, Report Designer automatically sets the constrained flag, eg:
When running the report and selecting the 'Unkown' value from the parameter list, the error 'the restrictions imposed by the CONSTRAINED flag in the STRTOSET function were violated' occurrs.
How can I prevent the constrained flag from being used, or am I doing something wrong with converting null values to 'Unknown'?
After connected to Analysis Services and following the path below:
Analysis Service - Databases - Cubes
I create the parameters for a custom report after right click on a specific Cube and select Browse to arrive at a view where i can define dimensions and parameters as well as drag and drop measure to the report rows and columns. The left top File bottom only give me a Save Selection or Save ALL option. However, i'm not sure where it saves it to or if it saves the settings for this custom report at all.
I pull this report monthly and it's a pain to recreate all the parameters. How to save this template for future pulls or maybe even incorporate the pull into excel for monthly refresh instead?
I have an SSRS report that gets its data from an SSAS cube, and it essentially displays a list of students and absences. Everything works fine.
But the users only want to see the top N students with the highest absences. For example, today they want to see the top 100, but during summer vacation, they only want to see the top 5.
Is there a way to add this parameter to the SSRS report? So if I select "5" from the dropdown parameter, it will show the top 5 absences.
The query that I use to populate the report is something simple:
SELECT NON EMPTY { [Measures].[Absences] } ON COLUMNS, NON EMPTY { ([Dim Date].[Date Key].[Date Key].ALLMEMBERS * [Dim Student].[Lte Cell Key].[Lte Cell Key].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@DimDateDateKey, CONSTRAINED) ) ON COLUMNS FROM [Daily Cube]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
Hi, I am trying to filter data within my report by a date range (FromDate - ToDate), which is using a cube as a datasource.
My Issue: I have the filtering working ok but if i select a date which is outside the range of the data within my cube for example if i select the starting date for the range as 1/Jan/1965 but by data starts from 15/Jan/1965 then no data is returned.
Within the MDX query within the STRTOSET function i am using 'constrained' which is around the date parameter i.e. StartDate for Range.
My question is has anyone or is it possible to use date values outside of the range of the data within my cube and get a correct dataset returned. If so could you please explain how with an example.
I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature available in any other updated version of ssrs?
I have parameters in my report. The user can choose the year, month and date (3 parameters). Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension . Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007". But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All". Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Hello, I tie up columns with parameters.what ever column are selected only those column should be displayed. Now my parameter are string data type. I write this expression in column-->propertyvisibility--> hide-->Expression
in the Visibility property for the relevant column, but it doesn't make any difference. The column still shows up even if the Rate parameter is set to Null or zero. I only want the column to show if the user enters a value in the Rate parameter which is greater than zero.
What needs to be done to allow a user to input data in a "From query report parameter"?
The "From query" option was used to show all possible selections the user can do but what if the user would now like to select for partial key...i.e.: like '%tss%'
I would like to avoid the Multi-Value parameter option.
NOTE: The report is done through Microsoft Visual Studio / RDL.
I have a handful of reports that are currently used by sales reps, and I'm trying to make them available to their regional VP's, and coporate users (executives and administrative staff that support Sales nationwide).
Currently, the reports take the UserID and resolve it to show the information that is only appropriate for that specific rep.
What I would like to do is have the parameter section at the top of the report be displayed for higher level users, so they could select an individual sales rep from a drop-down. (Ideally, the RVP's would only be able to select from reps in their region, but the corporate users would be able to select any rep.) The problem is, I don't want any of the sales reps to be able to select a rep other than themselves, for obvious reasons.
Is there a way to have the parameter section hidden/displayed dynamically, based on the UserID, so that users other than reps would have the ability to enter the desired rep name, but reps would not?
I have a Multivalue parameter with 4 available values and have 4 columns in the report that correspond to each of these values.I apply column visibility to each of the 4 columns with the following expression (the number changes for each column
What I want to do is that if I select a KPI and the Column value is NULL then to hide the row.Obviously if you select multiple KPIs and only 1 of the columns has null value then I wouldn't want the Row hidden.
I'd like to hide/show a table based on selected parameters. In the current setup I have a matrix and two tables underneath that need to be displayed from time to time. First of I use a multi-value parameter called "Lieferart". Depending on the parameter I have set the visibility of the two tables with the following expression:
=iif(Parameters!lieferart.Value(0) like "Nagel%", False, True)
This expression doesn't work though, any ideas??? I am also unsure about what I have to do If multiple values from the parameter list are selected as Parameters!lieferart.value(0) doesn't necessarily need to have a label like "Nagel" included...
I have a question regarding how to use report prompts in SSRS reports that are based on SQL queries. When I added the prompt into the query for use as a filter value, it says that there is an error. It does not recognise the '!' inside the parameter prompt string. Example is parameter!month_prompt.Value, which the ! is not recognised.
I have 2 tables in my report, a multi value parameter (tp_title) is passed to the report. I am trying to hide the first tablix with this expression in the visiblity option of the tablix properties.
=IIF(Parameters!tp_Title.value = "Financial Years" or Parameters!tp_Title.value="ALL", False,True )
I get the error: The Hidden expression for the tablix ‘Tablix1’ contains an error: Overload resolution failed because no Public '=' can be called with these arguments: 'Public Shared Operator =(a As String, b As String) As Boolean': Argument matching parameter 'a' cannot convert from 'Object()' to 'String'.
When I render the report. How the tablix can be made invisible based on the parameter?
Can we do the auto hide of parameter window in ssrs as soon as user select the input and click on view report and once the data comes, that parameter window should hide automatically.
I can pass a parameter from an Access Query to an Access Report (MDB) by entering [Select Date] in the Query criteria and by placing an unbound control with a control source =[Select Date] on the report. I can't get this to work from a SQL Function Criteria to an unbound control on the Access Data Project Report. In the Function Criteria, I enter @SelectDate. In the Report control, I enter @SelectDate and it gives me an 'Invalide Column Name' error. Any idea how I can pass a parameter from a SQL Function to an ADP report?
THANKS!
p.s. I tried searching for other postings on this without any luck.
I would like to control user access to my Report Manager.In detail,I would like to hide some report folders from certain users when they access the Report Manager.Some of the users are not suppose to see certain folders on the report manager,and some users are suppose to see all report folders.
How can I do this?.Where should I include this settings?
Hello, I have a report with parameter whice is a multi value parameter.
The problem is that this parameter does not always get a value and when he doest get a value the user gets an error message like: The "all_names" parameter is missing a value.
Is there a way to hide this error from the user? I can't check the "allow null value" for this parameter because its a multi value parameter.
I have a report which displays a customers invoice, in both the companys local currency, and the customers local currency.
The report language is "English (United Kingdom)" The fields showing customers currency language setting is set to something else, i.e. "France (French)" to display the Euro currency.
The application handles 34 currencies, the query returns the language string, ("France (French)"), to allow the report to bind its language setting to the querys output.
However, it doesn't work, a normal textbox will display the correct country name string, but Reporting Services cannot bind the language setting to a query result. So I also tried setting it as a report parameter, but no joy either (all currencys revert to USD).
I'm using =First(Fields!curFormat.Value, "myDataSet") to bind the 'language' setting, the result of this expression returns "France (French)", which is a valid option for this language setting, as it's in the drop down list.
Rather than create 34 seperate reports for each currency, are there any suggestions on how to bind a fields language setting to a query result?
I have a matrxi report with 6 Columns (Col 1, 2, ...6). Based on the parameters I select I wanted to hide 3 of the columns (Col 2, 4 and 6. But the problem is when I hide the columns, it leaves a gap. That means, the matrix report shows Col 1, 3 and 5 with gap in between the Columns.
There is no Column Visibility property in matrix report.
Please help me as I am looking to solve this issue for a long time now.
I'm currently investigating whether SQL Reporting Services might be the right solution to some reporting requirements I have been given (web reports).
There is a requirement that some of the columns are hidden to begin with and can be shown by clicking on the header of one of the other columns. E.g. There is a list of clients and a "Total Revenue" column, clicking on the "Total Revenue" column header would show an additional 5 or so columns which show a breakdown of different figures that make up the total revenue.
So my question is this: Is it possible to show/hide columns by clicking on the headers of other columns in the report?
I am trying to get members of an Active Directory group by querying the AD server from Transact-SQL (SQL Server 2005). Although there does not seem to be any written list of LDAP attributes that can be queried in AD (or I am not finding it), I have gotten this far:
SELECT * FROM
OPENQUERY( MYSERVER,
'SELECT cn, msExchHomeServerName, userPrincipalName FROM ''LDAP://CN=Users,DC=MYSERVER,DC=COM'' WHERE userPrincipalName=''*'' ')
This gives me a user list. But I can't find the syntax or attribute name(s) to query in order to get the membership of a specific group - for example, the group "SQL_Developers".
Anybody out there familiar enough with LDAP, AD and OPENQUERY() to give me a hand?
