History Record Error On DB Restore
Oct 5, 1998Whenever I perform a backup or restore I receive the following message:
"A history record could not be written to msdb.sysbackuphistory..."
What can I do to resolve this error?
ADVERTISEMENT
Message 3009 - Could Not Insert A Backup Or Restore History/detail Record In Msdb.dbo.sysbackuphisto
Oct 1, 2001Hi,
While backing up our database, I am getting the following message:
Could not insert a backup or restore history/detail record in msdb.dbo.sysbackuphistory or sysrestorehistory. This may indicate a problem with the MSDB database. DUMP/LOAD was still successful. (Message 3009)
Does anybody have any resolution for the same ?
Thanks,
Rajan
Database Restore History
Jul 16, 1998When I go to the database restore tab the "backup history" window shows the database backups and log backups from all the way back when the database was initially created. How do I purge the old database and log backup entries?
View 1 Replies View RelatedWhere Is Snapshot Restore History
Jan 25, 2008Hello!
I created database snapshot in SQL Server 2005 and was restoring database from snapshot. I was wondering if there is a system table that stored history of snapshot restores similar to msdb.dbo.restorehistory.
Thanks,
Igor
SQL 7.0 Restore Taking Long Time Reading Db History
Apr 18, 2002I have a backup mainentance plan that does a full backup daily at 03:00am and then 2 minute transaction log backups throughout the day to a raided hard drive (It is set to overwrite after 2 weeks), When i go into enterprise manager and select the database to restore it just seems to take too long to read the backup history in. Can this time be reduced as i need to be able to restore the database A.S.A.P but still need a point in time restore to within 2 minutes of going down??
Thanks
SQL Server Admin 2014 :: Restore Database Without Backup History In MSDB
Jul 23, 2014What is the best way to restore a database from a folder of backups (including full, diff and log backups) without using the backup history in msdb?
I have a restore process that restores all backups on a regular schedule in order to fully verify their integrity. To do this, I use the backup history in msdb on each server that I'm monitoring. I had a thought the other day that I would be in trouble if I lost msdb. Then my backup history would only be as good as the last backup of msdb.
What I'd like to do is read a folder of backup files and generate a restore script up to a specified time. Would I use RESTORE HEADERONLY to do this? If so, would I use PowerShell to traverse each file in the folder?
Error History?
Apr 2, 2008Is there a place where SQL Server logs errors? When I run my Access MDBagainst a SQL 7 back end, I get ODBC errors, which are sometimes a littledescriptive, sometimes not at all. I usually have to execute code directlyagainst the back end to find out what's really going on. And that's if I'mable to reproduce the error. It would be helpful if SQL logged all errors itgenerates, or if something like that can be set up.Thanks,Neil
View 1 Replies View RelatedA Problem For Restore Record From Log
Aug 18, 2001When I delete some records from any table and I haven't backup.
Can I restore the records had been Deleted by any way.
Error While Trying To View Job History
May 15, 2008I received this error while trying to view a job's history while using SSMS.
syntax error (ll DB Maint'']) (Microsoft.SqlServer.SmoEnum)
anyone see anything like this? I dropped a database yesterday that was included in the maintenance plan, but forgot to take it out of the plan itself.
Restore Error
Jan 28, 2002Hi,
I have a 40G database that I am trying to restore from tape. The original server has sp2 on it. On my first try I got a corruption error while restoring the database and later found on technet that a backup from a database that has "auto shrink" option enabled, might give corruption error 9004, and this is fixed with sp3. So I turned off the auto shrink off, took another tape bacdkup and tried restoring again, and this time I got the following error;
...
Processed 19 pages for database 'AGENT_CONNECT', file 'agent_connect_5_Log' on file 1.
Server: Msg 3624, Level 20, State 1, Line 1
Location: pageref.cpp:3889
Expression: pPage->GetLsn () == lp->GetPrevPageLsn ()
SPID: 14
Process ID: 129
Connection Broken
Can't even track the error number down on technet.
Any ideas?
Thanks very much in advance
B.
Restore Error
Jun 6, 2001We are taking database backup using SQL backup option and trying to restore the database on another server giving the following error
Microsoft SQL-DMO (ODBC SQL state 42000)
The header for file d:power.mdf is not a valid database file header.The page audit property is incorrect.Restore could not start database "power".Backup or restore operation terminated obnormally
Please help
Restore Error
Dec 13, 1999All,
I have a problem with restore a database.
I have a database 'prod' with 750Mb of data and 250Mb of log.
I create a new database with similar device, but when i try to restore it, i receive this message:
[SQL Server] Read on dump on device ‘D:TEMPackup.DAT’ failed, vsn=756 returns=-2. Please consult the SQL Server error log for more details.
Error 926 :[SQL Server] Database ‘production’ cannot be opened – it is in the middle of a load.
this is the result of Error log:
99/12/13 12:17:14.12 ods Using 'SSNMPN60.DLL' version '6.5.0.0' to listen on '.pipesqlquery'.
99/12/13 12:17:14.98 spid1 Recovery complete.
99/12/13 12:17:15.08 spid1 SQL Server's default sort order is:
99/12/13 12:17:15.08 spid1 'nocase' (ID = 52)
99/12/13 12:17:15.08 spid1 on top of default character set:
99/12/13 12:17:15.08 spid1 'iso_1' (ID = 1)
99/12/13 12:17:15.13 spid1 Launched startup procedure 'sp_sqlregister'
99/12/13 13:07:02.26 kernel initializing virtual device 1, C:prod_data_a15.DAT
99/12/13 13:07:22.43 kernel initializing virtual device 2, C:prod_log_a15.DAT
99/12/13 13:22:00.77 spid13 Trying to read after End of Data
99/12/13 13:27:54.88 spid13 Trying to read after End of Data
99/12/13 13:29:44.38 spid13 Trying to read after End of Data
I use SQL Server6.5 and NT4.0.
The backup has been doing with success by Networker.
Thanks for any help in advance
Restore Error
Nov 23, 2003Please Help ! Urgent
initially when i started with the database only thing i did was kept backing up the data through dts. option was - device and i kept adding it to the same file. now my machine has crashed . i have installed the new sql server. How DO i Get My data Back . it give error - device activation error path----
restore trminated.
on one machine i got it back but that was the latest one - i want the data i added to the file first time.
Its urgent.
:(
Restore Error
Sep 20, 1999Hi,
I have a got a error when I tried to restore a SQL Server 6.5 database.
Here is the error:
Error 268: [SQL Server] You cannot run SELECT INTO in this database. The DBO would have to run sp_option to enable this option.
I did turn on the option "Select into/Bulk Copy" using SQL Enterprise Manager but still doesn't work.
Any help would be appreciate.
SQL DB Restore Error
Dec 8, 2004I am getting an error when trying to restore a database. The file names and paths look to be correct. The error states that there is insufficient disk space, but the database being restored is 1.4GB and the amount of space on that drive is 17GB, so this should not be an issue. Does any one have any ideas?
Lindsay
DB Restore Error
Feb 22, 2005Hi all, I'm getting this error when trying to restore a database:
"Device activation error. The physical file name 'E:program filesMS SQL serverMSSQLdataDBname.mdf' may be incorrect. File 'DBname_dat' cannot be restored to 'E:program filesMS SQL serverMSSQLdataDBname.mdf'. Use WITH MOVE to identify a valid location for the file. Device activation error. The physical file name 'E:program filesMS SQL serverMSSQLdataDBname.ldf' may be incorrect. File 'DBname_log' cannot be restored to 'E:program filesMS SQL serverMSSQLdataDBname.ldf'. Use WITH MOVE to identify a valid location for the file. RESTORE DATABASE is terminating abnormally."
What I'm doing is, on another personal sql server a backup was created of this DB, then sent to me. Now I created a new DB named after the one that was backed up. Then I go to restore the DB into the one I created. But i get this error. How can I trouble-shoot this?
Restore Error
Dec 20, 2007Hi all,
Am new to ms sql server.Am using sql server 2005 on a windows server 2003.Am trying to restore a database from one server to another..so i took the backup of the database to be restored(.bak) and copied it to the other server..when i tried to restore i got the following error..
" TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Too many backup devices specified for backup or restore; only 64 are allowed.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3205) "
How do i go about it?
How To Restore A Log? Now We Get An Error
Jul 20, 2005Hi,While restoring the log we receive a message after about 30 minutes:Processed 1152109 pages for database 'restest', file 'sales_Log' onfile 1Server: Msg 9004, Leverl 21, State 20, Line 3An error occurred while processing the log for database ' '.It is unclear why the databasename is an empty string, I guess there must besomething corrupt hereo or a bug.These are the steps we followed:- restore database with norecovery (to different database)- restore the log with recoveryThe database stays un-accessable after the restore log, so it seems therewas no recovery done.When I look at the files I see a restest_Log with about the same sizeof the log we try to restore. It is unclear if the restore databaseput this file here, or it is created during the restore log.Someone has a clue?Regards,Rene
View 1 Replies View RelatedRestore DB Error:
Nov 28, 2007Hi,
I'm trying to do a backup which works fine and then when it gets to the restore it crashes with error message:
Msg 3154, Level 16, State 4, Line 8
The backup set holds a backup of a database other than the existing 'CompsnapTestBackup' database.
Msg 3013, Level 16, State 1, Line 8
RESTORE DATABASE is terminating abnormally.
HERE IS MY CODE:
use master
GO
--BACKUP DATABASE CompsnapTest
--TO DISK= 'C:TestCompsnapTestBackup.bak' ;
--RESTORE FILELISTONLY
--FROM DISK= 'C:TestCompsnapTestBackup.bak' ;
RESTORE DATABASE CompsnapTestBackup
FROM DISK= 'C:TestCompsnapTestBackup.bak'
WITH MOVE 'CompsnapTest_Data' TO 'C:TestTest2CompsnapTestBackup.mdf',
MOVE 'CompsnapTest_Log' TO 'C:TestTest2CompsnapTestBackup.ldf';
GO
thanks,
Restore Error
Aug 8, 2007Hello,
I'm having a problem restoring a database from Full Backup/Recovery model. The error that I get when I try to restore the database is this, this error comes when it is 70% completed:
TSQL Command:
RESTORE DATABASE [ACT01] FROM DISK = N'C:ACTBackup.bak' WITH continue_after_error, FILE = 1, MOVE N'ACT01' TO N'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLACT01.mdf', MOVE N'ACT01_log' TO N'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLACT01_1.LDF', NOUNLOAD, REPLACE, STATS = 10
GO
Msg 3183, Level 16, State 2, Line 1
RESTORE detected an error on page (0:0) in database "ACT01" as read from the backup set.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
When i change the TSQL to restore verify only i get the following error:
Msg 3242, Level 16, State 2, Line 1
The file on device 'C:ACTBackup.bak' is not a valid Microsoft Tape Format backup set.
Msg 3013, Level 16, State 1, Line 1
VERIFY DATABASE is terminating abnormally.
Result:
10 percent processed.
20 percent processed.
30 percent processed.
40 percent processed.
50 percent processed.
60 percent processed.
70 percent processed.
80 percent processed.
90 percent processed.
Msg 3242, Level 16, State 2, Line 1
The file on device 'C:ACTBackup.bak' is not a valid Microsoft Tape Format backup set.
Msg 3013, Level 16, State 1, Line 1
VERIFY DATABASE is terminating abnormally.
I do not have access to the original database, is there anyway to fix this?
Restore Error
Aug 8, 2007Hello,
I'm having a problem restoring a database from Full Backup/Recovery model. The error that I get when I try to restore the database is this, this error comes when it is 70% completed:
TSQL Command:
RESTORE DATABASE [ACT01] FROM DISK = N'C:ACTBackup.bak' WITH continue_after_error, FILE = 1, MOVE N'ACT01' TO N'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLACT01.mdf', MOVE N'ACT01_log' TO N'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLACT01_1.LDF', NOUNLOAD, REPLACE, STATS = 10
GO
Msg 3183, Level 16, State 2, Line 1
RESTORE detected an error on page (0:0) in database "ACT01" as read from the backup set.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
When i change the TSQL to restore verify only i get the following error:
Msg 3242, Level 16, State 2, Line 1
The file on device 'C:ACTBackup.bak' is not a valid Microsoft Tape Format backup set.
Msg 3013, Level 16, State 1, Line 1
VERIFY DATABASE is terminating abnormally.
Result:
10 percent processed.
20 percent processed.
30 percent processed.
40 percent processed.
50 percent processed.
60 percent processed.
70 percent processed.
80 percent processed.
90 percent processed.
Msg 3242, Level 16, State 2, Line 1
The file on device 'C:ACTBackup.bak' is not a valid Microsoft Tape Format backup set.
Msg 3013, Level 16, State 1, Line 1
VERIFY DATABASE is terminating abnormally.
I do not have access to the original database, is there anyway to fix this?
When I Add A New Record I Get An Error.
Jul 31, 2007hi
in a page i use DataListView to insert records (Lan=VB)
in my SQL database i creat some colums and once is DateStamp to save the Date of the record is created and not alowed NULL but in Default mode (getdate())
when i creat a record and don't insert annything for it page getting an error and tel me the DateStamp is not alow NULL.
please tell me what to do to insert the record whithout getting error?
Thanks Zed
You Can't Go To The Specified Record Error
Mar 7, 2008I have a form that pulls information from several tables and produces a record that includes information from these tables based on what you choose. The first field to enter information is a combo box that pulls from a patient information record. If I put in totally new information, I have no problem adding a record, but if I try to choose infomation from this table and use it again for a new record, it gives me the error shown in my subject line. (This combo box also populates information to other text boxes on the form). I have the row source pulling this information from the table and the Control source to do the same. I have another combo box set the same and it does not cause this error. What areas should I look at that might be causing the problem. I have the tables set to allow duplicates. If I need to include coding in for this question, please let me know. Since I am totally new to working with access, I'm not sure if you would need this, or can just point me to other areas I might check that can influence this problem. I appreciate any help you can provide.
View 3 Replies View RelatedError Restore Backup
Nov 6, 2007hi all,
i can't restore backup of me database by sql server managment i will attach the backup up and i hope to help me
http://filaty.com/f/711/985c9d2.hayat.zip.html
http://rapidshare.com/files/67920026/hayat.zip
Database Restore Error
Jun 13, 2001We are taking database backup using SQL backup option and trying to restore the database on another server giving the following error
Microsoft SQL-DMO (ODBC SQL state 42000)
The header for file d:power.mdf is not a valid database file header.The page audit property is incorrect.Restore could not start database "power".Backup or restore operation terminated obnormally
The partition on both servers are same and directory structure also same
Please help
Restore Database Error...
Sep 20, 1999Hi,
When I restore my database on other sqlserver,the system prompted "The database you are attempting to load was dumped under a different sort order ID(42) than the one current running on this server(52),and at least one of them is a non-binary sort order".
How can I do?
Any help will be appreciated!
Restore Database ERROR
Aug 15, 2002I' have several database to restore. I created scripts.
Here is an example:
RESTORE DATABASE DatabaseName FROM DISK = 'C:DatabaseName.bak'
This is the error message:
Server: Msg 3154, Level 16, State 2, Line 2
The backup set holds a backup of a database other than the existing 'CAMS' database.
Any ideas???
Thanks in advance - Vic
Error Restore Of Database
Jan 27, 2007HI,
While restoring a database from a backup file having extension .back we are getting the following error
"back is not part of the multiple family media set backup with format can be used to form a new media set"
Please guide me how to handle this error.
Thanks,
Karthik
Restore Database Error
Jan 18, 2006Hello !
I am just few months started to learn SQL server.
I just attempt to restore a database which I have backuped last week.
The following error appears each time when I was trying Restore it from Hard Disk.
Error :
RESTORE DATABASE must be used in single user mode. when trying restore the master database. RESTORE DATABASE is terminating abnormally.
Please help me to restore my database.
Error During Database Restore
Oct 19, 2005Hi,
View 5 Replies View RelatedRestore Error :msg 5173
Nov 3, 2006Hi,
I try to restore a backup copy of production database into development database, this is our routine process, which is scheduled every night, at the end of the restore process, development database is set to SIMPLE and log file is truncated. It works fine, but today the process failed because backup file is corrupted, so the database is in loading state, and I used the following restore command to restore database from another good copy of backup file:
restore database devcopy
from disk='c:dev.BAK'
with move 'dev_data' to 'G:DBFilesdevCopy_Data.MDF',
move 'dev_Log' to 'F:DBFILESdevCopy_Log.LDF',
replace
I got an error messge:
Server: Msg 5173, Level 16, State 1, Line 1
Cannot associate files with different databases.
Log file 'F:DBFILESdev_Log.LDF' does not match the primary file. It may be from a different database or the log may have been rebuilt previously.
Processed 4937208 pages for database 'devcopy', file 'dev_Data' on file 1.
Processed 2 pages for database 'svrsprodcopy', file 'dev_Log' on file 1.
RESTORE DATABASE successfully processed 4937210 pages in ... seconds
I do not know what' wrong, but the database is online
Thanks for help
ASP: Error When Trying To Insert Record
Jul 6, 2007I receive the following error when trying to INSERT INTO; am using Access db.
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression.
The code is as follows:
<%
Dim dbConn
set dbConn = server.CreateObject("adodb.connection")
dbConn.open("connect")
dbConn.Execute("INSERT INTO tbl_country (region, countryName, population, country_currency, description, imageURL, imageALT) VALUES ('" & Request.Form("region") & "', '" & Request.Form("countryName") & "', '" & Request.Form("population") & "', '" & Request.Form("country_currency") & "', '" & Request.Form("description") & "', '" & Request.Form("imageURL") & "', '" & Request.Form("imageALT") & "'),")
Response.Redirect("admin_master.asp")
%>
I would greatly appreciate any help you can give me.
SQL Server 2005 Restore Error!
Aug 18, 2006Hi Team,
I try to restore my local database using the backup from the live server. However I encountered this type of error:
====================================================================
System.Data.SqlClient.SqlError: The path 'C:Microsoft SQL ServerFullTextApplication_FullText' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
====================================================================
It worked before I added a full-text search feature. Any idea?
Thanks in advance.