I have a problem with my Microsoft Visual Studio 2005, since I try to click and drag SQLDataSource to design page, it won't display SQLDataSource tasks as usual so that I have a problem to configure SqlDataSource. Any help pls? Is there any way to solve this, since I'm not interesting to reinstall again.
My specification computer : Pentium IV 2.00 GHz and Memory 512 MB.
Best Regards,
Aries
This may sound a little anal-retentive, but I have a number of SSIS packages that, when I open them, the first thing I have to do is scroll to the left or up to get to where the tasks are displayed. Even if I move the tasks right or down, they still end up in that initial position. This happens even if I use auto arrange.
Is there a way for me to set the package so it has a consistent point or display at which it opens?
I'm trying to follow along with lesson07 Web Development Express series and when I drag the SqlDataSource tool onto my form I do not see the object on the screen. I therefore can not configure it until I have placed GridView object onto my form. I hope you can help me in how to view the SqlDataSource or inform me where I can get further information
View 2 Replies View RelatedHi,
View 1 Replies View RelatedI have the following sqlDataSource. I wan't to display one piece of data, not a whole row, from it. I can find lots of information on putting it into a datagrid, but nothing on puttin one piece in a textbox. I cannot use a formview as we are embedding html in response.write and it breaks in a formview. Thanks.
<asp:SqlDataSource runat="server"
ID="myEmpInfo"
SelectCommand="Select di.EmpInfo,di.eth,gc.t_level From tblEmp di
,tblMisc gc
Where di.empnum = @empnumand di.empnum = gc.empnum" DataSourceMode="DataReader" ConnectionString="<%$ ConnectionStrings : myConnectionString %>">
<SelectParameters>
<asp:QueryStringParameter Name="empnum" QueryStringField="empnum"/>
</SelectParameters>
</asp:SqlDataSource>
I've added an SqlDataSource control to my web page and selected "Configure Data Source" on it. This brings up a "Choose Your Data Connection" wizard, and it asks you to select from a dropdown list of presumably pre-existing connection strings in my web.config file. However none of my connection strings will display in that dropdown list. The only thing i can do is hit the "Create New Connection" button and this adds yet another connection string to my web.config file. I've already ran through the wizard once, created a new connection string, but when i run through the wizard again, even the new connection string - the one created by the last wizard will not appear in the dropdown list. Any suggestions? Jason
View 3 Replies View RelatedHi,What's the 'new' declarative way to fetch one field from a SQL table and display the result in a Label control?I have a users table with a fullname field. I want to query the table and retrieve the fullname where the usertable.username = Session("loggedinuser")I can make the SqlDataSource ok that has the correct Select query, but not sure how to bind the label to that.thanks,Bruce
View 4 Replies View RelatedHi, Im trying to pull data from 2 fields in the same table into a SqlDataSource that feeds into a GridView, and display them as 1 field in GridView? I have a database table that has entries of users and their friends. so
this tblFriendUser has a column called UserName and another column
called FriendUserName.
I am trying to get a list of friends for that particular user. Note
that if User1 initiated the friend request, he will be listed as
UserName and his friend as FriendUserName, but if his friend initiated
the friend request, it will be vice versa: him being the FriendUserName
and his friend the UserName. So I want the following 2 queries run and merged into
one query in order to return 2 columns only: UserFriendID & UserName, is that
possible? Is my design bad? Any suggestions/advice would help! Thanks a lot!
SELECT UserFriendID, UserName
FROM tblUserFriends
WHERE (UserName = @UserName);
SELECT UserFriendID, FriendUserName AS UserName
FROM tblUserFriends
WHERE (FriendUserName= @UserName);
I would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
What is the C# code I use to do this?
I'm guessing it should be fairly simple, as there is only one row selected. I just need to pull out a specific field from that row and then insert that value into a different SqlDataSource.
i am using visual web developer 2005 with SQL Express 2005 with VB as the code behindi have one database and three tables in itfor manipulating each table i am using separate SqlDataSource() is it sufficient to use one SqlDataSource() for manipulating all the three tables ? i am manipulating all the tables in the same page only please help me
View 1 Replies View Relatedare there restrictions on what a DBA can do on a developer's edition?
i'm asking coz i get really bad connection problems when changing service accounts, client aliases, port numbers, connecting to different components like ssis, reporting services, database engine, etc...
in sql2000, changing these things are a breeze, is there some guidelines when making these changes in 2005?
TIA
--------------------
keeping it simple...
Hi guys
Just want to know whether you guys do the following as a dba:
1. Setup a logging for tracking database as well as table size that containing size, indexing size. You can measure the growth.
2. Record for indexing for each database. I think this is over kill task.
3. Record database setup such as create statistic, update statistic etc.
These tasks can be automate to record every month for example and record this into Administration database for instance.
What else you guys record?
Thanks
If I'm in the Data Flow tab in VS 2005, how can I select only certain components to run to test? I tried highlighting the ones that I want to run but it's running all of them in the tab...some of the components I want to take out for testing then maybe put back in later. If I delete the tasks I don't want to run, then I end up having to recreate them
View 11 Replies View RelatedWhere to look for the web assitant created jobs on the server?I created a web page using the web assistant which is suppossed to get updated each time a value changes in a particular table,but I can't find the task which I created ,where do i look for that?I didn't use this wizard previously.thanks for any help!
Sheila.
Would anyone be aware of anyplace I could find some good information on creating DTS custom tasks? I've come across a couple of articles from SQL Server Magazine, but nothing too substantive...
Better yet, if anyone has any success (great or small), I'd like to hear from you and hear some of the things you did, what your custom task does, difficulty.
I'm just trying to get an idea of how much work I have ahead of me....
Thank You...
If I have 2 scheduled tasks set for the same time (perhaps accidentally), will the
SQL Executive start 1 and queue the other one until the first is complete and
then run the 2nd task? Or will they both be started simultaneously?
Thanks!
Toni Eibner
I have been running the following production job successfully for a long time.
It now fails, and the Task History Last Error Message displays 'No Message'.
The log file ( C:MSSQLLOGMaint_TombV50.txt) shows it ran successfully,
with a Return Code 0.
SQLMAINT.EXE -D TombV50 -RebldIdx 10
-CkDB -CkAl -CkTxtAl -CkCat
-UpdSts -Rpt C:MSSQLLOGMaint_TombV50.txt
It looks like SQL Executive burps for some reason.
Any ideas, comments, suggestions?
Thanks,
sb
To all,
If I have a scheduled tasks that is owned by 'sa', how can I assign permissions to allow another user, even the database dbo, to register the SQL server and view the scheduled tasks?
Thanks in Advance,
Ed Molinari
Hello ,
I need create tasks, which will be wake up daily to backup 4 databases.
My questions are:
1. Can I create 1 task to backup all databases using TSQL command?
Ex: DUMP DATABASE test1 to test1_backup
DUMP TRANSACTIONS test1 to test1_backup with truncate_only
DUMP DATABASE test2 to test2_backup
DUMP TRANSACTIONS test2 to test2_backup with truncate_only
Etc.
If it’s possible can I just print this command to ‘Command:’ text box in the ‘New task’ window
without writing the TSQL command into a text file and execute it with the ISQL program through
CmdExec??????
2.If first doesn’t work: can I do the same job, but create for every backup own task and run the same
TSQL command for particular database. And if I can is it possible to schedule run all 4 tasks the same time or I should put time’s interval?
3. If 1. And 2. Are false. Give me your smart advice.
Thank you,
Sev
Is anybody knows how to transfer all the tasks in one server to another?
Our development database will be transferred/copied to a new production box
and that includes all tasks that we've created. We have almost a hundred
tasks defined and we don't want it create manually. If someone had done
this before, please give me a hint, i appreciate it very much!
Thanks.
vic
Hi all,
I've got a DTS job which has lots of tasks in it. I've also got quite a few flows of workflow and i've noticed that a task won't execute if it has both Failure and Success workflow pointing to it... It can have multiple failures pointing to it and it will execute but it can't have multiple successes or a combination of workflows...
Does anyone know a way to get around this or to change the 'AND' ing that seems to be on the workflow going into a task..
Thanks.
Hi,
I just volunteered to be the database administrator of our new sql server. I am normally the programmer so I have little experience with database administration. There are some basics that I need some assistance with mainly when to perform various maintanence checks. For example, how often do I need to perform some of the dbcc commands that I have read about? How often do I check for data integrity, index fragmentation, rebuilding indexes, or defrag indexes?
I have to come up with a plan by tomorrow and I don't know if I have anything solid enough since I don't exactly know when to perform some of these tasks. :confused:
Thanks so much for your advice.
Can someone let me know any 10 things that are usally automated using the SQL Server Agent,
I mean besides backup what all can i automate
Thanks
could some one help in giveing solution for this tasks..
[CODE]
Task 1 : Get the first day and last day of the week
Ex: input : '04/12/2006'
Required ouput :
start_date End_date
04/09/200604/15/2006
Note :1. start_date should be sunday
2. end_date should be saturday
Task 2 -- Find the product sales week wise
Find the product sales week wise
Output Required:
gasstationID productClass week1 week2 week3 week4
-------------------- ------------ ----------- ----------- ----------- -----------
111 DSL 1 0 0 0
111 GAS 2 0 1 1
222 DSL 1 0 1 1
222 GAS 1 0 0 0
create table trial_sales(
gasstationIDbigint,
salesDatesmalldatetime,
gallonsbigint,
productClass varchar(4))
insert into trial_sales values(111,'11/01/2005',10000,'GAS')
insert into trial_sales values(111,'11/02/2005',1000,'GAS')
insert into trial_sales values(111,'11/02/2005',20000,'DSL')
insert into trial_sales values(222,'11/01/2005',10000,'GAS')
insert into trial_sales values(222,'11/02/2005',10000,'DSL')
insert into trial_sales values(111,'11/15/2005',1000,'GAS')
insert into trial_sales values(222,'11/15/2005',10000,'DSL')
insert into trial_sales values(111,'11/25/2005',1000,'GAS')
insert into trial_sales values(222,'11/25/2005',10000,'DSL')
Task 3 Display unique values
Display unique values in
create table t (colA varchar(25))
insert into t values('apple')
insert into t values('bat')
insert into t values('car')
ouput required:
a
b
c
e
l
p
r
t
Task : 4
I have a table in the database I am working with with the following columns:
(I have simplified this down for the sake of clarity)
int p1
int p2
int p3
int s1
date d1
string s1
There is no primary key and the table more resembles a log than anything.
e.g.
p1 p2 p3 s1 d1 s1
1 12 14 100 23May comment 2
1 12 14 800 22May comment 1
1 12 14 300 24May comment 3
1 12 15 100 22May comment 2
1 12 15 800 21May comment 1
2 12 15 100 23May comment 1
What I want to do is exttract the rows from the table where the combination
of p1 p2 and p3 is distinct/unique and the date is the most recent one for
all combinations of p1, p2, p3. So from the table above I would end up with
the resultset:
p1 p2 p3 s1 d1 s1
1 12 14 300 24May comment 3
1 12 15 100 22May comment 2
2 12 15 100 23May comment 1
Task 5
say i have the following data...
uId(int PK), productcode(int), quantity(int)
1,12,5
2,12,3
3,12,5
4,11,9
....and i have an order for productcode 12 with quantity of 6 products.
i need to select only enough rows to reach a quantity of 6.
in this case, i would want the first two rows which would give me a sum of
8.
how can i do this without looping through each record, getting the quantity
and exiting the loop when i have a sum >= 6?
Task 6
I have two tables as below, TABLE1 and TABLE2.
TABLE 1: Base
IDPNamePPrice
-------------------------------------
1A30
2B20
TABLE 2: History
IDLdateAmount
-------------------------------------
12005/8/750
The ID of TALBE1 is the primary key and the ID of TABLE2 is the foreign key.
What's the right T-SQL JOIN statement when I pass the date of 2005/8/7,
it will return the result as below:
LdatePNameAmount
------------------------------------
2005/8/7A50
2005/8/7Bnull
and when I pass the date of 2005/8/8, it will return the result as below:
LdatePNameAmount
------------------------------------
2005/8/8Anull
2005/8/8Bnull
Task : 7
Reverse the Name
create table sample_judge(
judge_namevarchar(50))
go
insert into sample_judge values ('J Smith')
insert into sample_judge values ('M Samuel')
insert into sample_judge values ('S Shan')
insert into sample_judge values ('K Anand')
insert into sample_judge values ('K K K K Anand')
insert into sample_judge values ('K R Shanth Anand')
insert into sample_judge values ('K R Shanth Anand Kumara Velu')
go
Expected Output :
Smith J
Samuel M
Shan S
Anand K
Anand K K K K
Shanth Anand K R
Shanth Anand Kumara Velu K R
[CODE]
thanks in adv
chakri
Hi,
I would like to run several checklists against each sql server 2005 instance.
I can get a list of the sql server 2005 machines (Which are on the network) from a sql server table.
There is a another table which holds the list of the checks that need to be carried out against each sql server 2005 machine called tblCheckList.
The list of tasks in the table is briefly as follows:
1) get the path where the .mdf file is placed.
2) get the path where the .ldf file is placed
3) get the path where .BAK or .TRN are placed
4) get the path where the sql 2005 is installed
5) get the servicepack version
6) get the authentication
7) remove sample databases i.e. northwind or pubs, etc...
8) get the recovery model on UserDB
9) get the size of each database
...
...
...
The list goes on
Thanks
Can someone let me know any 10 things that are usally automated using the SQL Server Agent,
I mean besides backup what all can i automate
Thanks
Just wonder what do you dba do in your daily tasks. I usually have meetings where I have to say what Ive been doing during the week.
=============================
http://www.sqlserverstudy.com
Is it possible to schedule tasks in SQL Express, for example a database backup, or to periodically execute a stored procedure?
View 3 Replies View Related
Hi,
I am using Windows 2000 and created around 15 scheduled tasks. My scheduled tasks supposed to run every morning. I have to set password to first scheduled tasks every morning; otherwise none of the scheduled tasks works. As soon as i put password in the scheduled tasks, other tasks work fine.
Any ideas how to save password to schedule task?
Thanks in advance..
Hi all,
I will be entering a job as a Junior Sql Server DBA with no senior above me. I would like to know what a DBA does everyday and all day.
If anyone can give me a thorough answer I would very much apreciate it, what are the day to day tasks.
Receiving projects is one thing, that is understood, but sometimes there are no projects and u r just supposed to do ur job.
What do you do as soon as you start your shift, then half an hour later at 9am what do you do then?
then at 10am what do you do, then 11am, noon, 1pm, 2pm, 3pm, 4pm, etc.....
Do do you do all day and everyday? Someone please give me a thourough answer.
Thank You very much
Folks,
I am sort of new to SSIS.. I am doing the following
- Have a package that does some data transformation
- The transformed data is written to a csv file
- The csv file is copied to multiple destinations by a script task
All the above actions are performed in one package.
The SSiS log is not very helpful it just mentions a generic error code that is of no use.
Q1) If I need to separate the above actions in the Sql Server job scheduler as separate tasks do I have to
split the above tasks into separate dtsx files ?
If so how can we have the first dtsx kickoff the second one and can the second dtsx file share the variables ?
Q2) does anyone have any suggestions or examples on how log each step of your dts package to a log file
Thanks
Hi All,
How to Schedule the execution of set of packages for every one hour. In the control panel > Schedule tasks >
There are options available only to the day granular level.
Any ideas on this would be appreciated.
Thanks in advance ...