Horizontal Charts - Point Labels Issue
Dec 18, 2006
Hi. I'm currently having some troubles with the Reporting Services charts and I was hoping I could get some help here.
The issue here is that I'm using charts with horizontal bars, and I can't seem to be able to control the alignment of the Point Values. I've read that the alignment can't be set while using stacked bar charts, but I'm not using a stacked bar chart, just a simple horizontal bar chart.
A workaround for this would be to use different colors for the values displayed outside the bars than from those displayed inside the bars (for better visibility). I had expected RS to display the values inside the bars when they are greater than a set percentage of the chart range (e.g. 95%). Alas, this is not the case, as it seems to consider the number of digits the values have AND the grouping. At least.
So, does anybody have an idea about what could be done in this particular situation?
View 1 Replies
ADVERTISEMENT
Aug 31, 2007
I have a pie chart and have tried every option I could find on the Data tab for the point labels. They bunch up all over the place. What am I missing?
Does Dundas do this better?
Jerry
View 4 Replies
View Related
Jan 11, 2007
Hi People,
I'm with a new problem.
I creted a simple bar type and sometimes the values of point labels are showing inside of bar, This is a problema, because if the length of bar will be short, the value doesn't shows. How can I make to force the point label value outside of bar ??
Thanks
View 1 Replies
View Related
Mar 26, 2008
I've created a chart and I'm using point labels. When I have two series, and the values on one bar of one of the series is zero, the point label for that bar shows up at the same point on the chart as the value for the other series--in other words, it shows up in the middle of the chart rather than at the bottom, where a value of zero should be. Any ideas on how to fix this? It just looks stupid.
Example--sales for customer 1 and 2 for June and July. Sales for cust 1 for June is 5, for cust 2 is 3; point labels show up at the tops of the bars. Sales for cust 1 for July is 0, cust 2 is 6; point label for cust 1 shows up near 5 (where the value for the other month of data shows), and for cust 2 at the top of the bar.
Thanks!
View 1 Replies
View Related
Mar 26, 2008
Hello all,
First off, I appreciate the time that those of you reading and responding to this request are offering. My quesiton is a theoretical and hopefully simple one, and yet I have been unable to find an answer to it on other searches or sources.
Here's the situation. I am working with SQL Server 2005 on a Windows Server 2003 machine. I have a series of databases, all of which are in Full recovery mode, using a backup device for the full database backups and a separate device for the log backups. The full backups are run every four days during non-business hours. The log backups are run every half hour.
Last week, one of my coworkers found that some rarely-used data was unavailable, and wanted to restore a database to a point in time where the data was available. He told me that point in time was some time back in November.
To accomplish this, I restored the database (in a separate database, as to not overwrite my production database) using the Point in Time Recovery option. I selected November from the "To a point in time" window (I should note that this window is always grey, never white like most active windows, it seems), and the full database backup and the subsequent logs all became available in the "Select the backup sets to restore" window.
I then tried a bevy of different options from the "Options" screen. However, every restore succeeds (ie: it doesn't error out), but seems to be bringing the database back to a current point in time. It's never actually going back to the point in time I specify.
My questions are as follows:
a) Is it possible to do a point in time recovery to a point in time BEFORE the last full database backup?
b) If so, what options would you recommend I use? (ie: "Overwrite the existing database", restore with recovery, etc etc).
I again appreciate any and all advice I receive, and I look forward to hearing from anyone and everyone on this topic. Thank you.
Ryan
View 4 Replies
View Related
Nov 10, 2006
I'm running SQL Server 2005 on a Server 2003 machine serving both our home network as well as a remote site through a point-to-point T1. While file transfer speeds are up to par, the remote site's interaction with SQL Server (Point of sale system) is very slow. After testing I am certain that it has nothing to do with the actual physical machine in place neither is it an issue with the program itself since speeds are as they are supposed to be over the home network lan. It seems that there might be a packet size issue or something of the sort. Has anyone dealt with this before or have any thoughts?
Thanks,
Peter
View 7 Replies
View Related
Jun 27, 2006
Dear fellows,
LOP_BEGIN_XACT, LOP_COMMIT_XACT,
LOP_INSERT_ROWS
Labels as the ones are easy recognizable when you explore LDFS by mean DBCC or whatever but on the contrary the following ones are tricky to reach the meaning:
LOP_IDENTITY_TYPE
LOP_DELTA_SYSIND
LOP_SET_BITS
Does anyone have any link related with this? I tried hard to search by Goog or something like that but unsuccessfully at all.
View 3 Replies
View Related
Mar 27, 2007
I have a simple bar graph. All I am looking to do is display the values on each bar. Can someone please help me. Thanks
View 1 Replies
View Related
Apr 22, 2008
I have a page that is part of a 5 page wizard. The wizard gathers data for a claim filter. The second page is laid out with four labels at the top
Filter Name: <filterName> -- filterName_LFilter Description: <filterDescription> -- filterDescription_LFilter Data Source: <filterDataSource> -- filterDataSource_LFilter Purpose: <filterPurpose> -- filterPurpose_L
--I have written an sp to populate these four label.Text values. I want to populate them on page load.
Two questions. How do I get four output values out of the sp? Is there a better way to do this than an sp?
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
-- =============================================-- Author: <Author,,Name>-- ALTER date: <ALTER Date,,>-- Description: <Description,,>-- =============================================ALTER PROCEDURE [dbo].[a_spNewFilter_Step1_Summary] -- Add the parameters for the stored procedure here @filterID int ,
@filtername varchar(100) OUTPUT, @filterdescription varchar(250) OUTPUT, @filterOwnerID int OUTPUT, @filterDataSourceID INT OUTPUT, @filterPurposeID int OUTPUT
ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements.SET NOCOUNT ON;
--DECLARE @FilterID int
--SET @filterID = 14
SELECT filterIsComplete, filterCreateDate, filterStep1Complete, filterName, filterDescription, das.AuditorFirstName + ' ' + das.AuditorLastName as FilterOwner, dfds.filterDataSource, dfp.filterPurposeFROM a_factSamplingFilter_2 fsfINNER JOIN dbo.a_dimFilterDataSource dfdsON dfds.filterDataSourceID = fsf.filterDataSourceIDINNER JOIN dbo.a_dimAuditStaff dasON das.AuditorID = fsf.filterOwnerIDINNER JOIN dbo.a_dimfilterPurpose dfpON dfp.filterPurposeID = fsf.filterPurposeIDWHERE filterID = @filterIDGROUP BY filterIsComplete, filterCreateDate, filterStep1Complete, filterName, filterDescription, das.AuditorFirstName, das.AuditorLastName, dfds.filterDataSource, dfp.filterPurpose
END
GOSET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
----
protected void Page_Load(object sender, EventArgs e) {
int filterID = int.Parse(Request.QueryString["filterID"]); /// grab the filterID from the URL query string
string connectionString = WebConfigurationManager.ConnectionStrings["DDT"].ConnectionString; SqlConnection con = new SqlConnection(connectionString);
SqlCommand cmd = new SqlCommand("a_spNewFilter_Step1_Summary", con); // get the values from filter setup step1 cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new SqlParameter("@FilterID", SqlDbType.Int)); // using the filterID created in step1 cmd.Parameters["@FilterID"].Value = filterID;
cmd.Parameters.Add(new SqlParameter("@FilterName", SqlDbType.VarChar, 100)); cmd.Parameters["@FilterName"].Direction = FilterName_TB.Text;
cmd.Parameters.Add(new SqlParameter("@FilterDescription", SqlDbType.VarChar, 255)); cmd.Parameters["@FilterDescription"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterOwner", SqlDbType.VarChar,50)); cmd.Parameters["@FilterOwner"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterDataSource", SqlDbType.VarChar,50)); cmd.Parameters["@FilterDataSource"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterPurpose", SqlDbType.VarChar,100)); cmd.Parameters["@FilterPurpose"].Direction = ParameterDirection.Output;
con.Open();
try { cmd.ExecuteNonQuery(); } finally { con.Close(); }
///get name, description, owner, datasource, purpose
}
View 1 Replies
View Related
Dec 14, 2005
Hi!
I have these tables:
DB1
MID
IIN
Title
FullName
Address
Apt
City
Province
PostalCode
DB2
MID
Lang
Version
How can I output a text file formatted like the one below?
(05) 01046 (F 05)
Mr. Sylvain Cote
123 Sesame Street
Apt 6
Charny, BC
L8T 5G6
where
(05)-MID
01046-IIN
(F 05) - Lang
$3.99/yr .COM!
http://www.greatdomains4less.com
View 3 Replies
View Related
Oct 25, 2007
Hi,
We are having trouble getting labels to print correctly when there is a lot of data close together on the labels. These are more than just address labels, so there are many lines, graphics, and borders. Are there additional tools or suggestions for keeping labels consistant?
Thanks
View 1 Replies
View Related
Mar 16, 2007
Ok, I'm an idiot. Does anyone out there have some step by step instructions for creating a report that will do mailing labels. I've got multiple columns on my report but I end up with the contents of each column being the same across each grouping/row. In other words for each record read, since I have three columns, I get three occurances of each customer and address until all the data selected for that row is presented, then I go to the next customer which again is repeated across all three columns.
I'm sorry I'm so stupid, but I've looked at other entries on the forum, and I just can't figure it out. We are trying to get out from underneith Business objects thumb and any help would be greatly appreciated. Thanks! - Eric -
View 4 Replies
View Related
Jun 20, 2006
Is there a SQL statement that I can use which allows me to set value lables in a result set? For example, if a table has a gender variable with values of 'M' & 'F', can I write a sql statement which creates a result set that changes these to 'Male' & 'Female' so that everything I do with the result set shows the new labels (but does not change the underlying M/F values in the orginal table?
I do not want to create a new table, but rather display the M/F values as Male/Female when I access the result set in an application (such as Report Services).
Thanks for any advice you can give.
Ed Sloat
View 3 Replies
View Related
Mar 2, 2006
I have a line chart that has several series, and it routinely leaves off 1 or 2 point labels on the last X-axis.
Is anyone else experiencing this? If so, does anyone know what the cause is, and is there a fix?
Thanks!
BobP
View 15 Replies
View Related
Aug 24, 2006
Hi..
Just want to ask if anyone has encountered the same problem..
I have used the Simple Bar Graph to display the list of employees with the most number of emails/chats and sorted it so that the highest number of emails will appear at the bottom of the graph. The problem is that the graph doesnt display a label on the highest number of email/chats. It displays the number of email/chats that the other employee has and its only the employee with the highest number of email/chats that has no number label. It just wont show and I have no idea now on what to do about it.
Does anybody have a solution for this one?
View 4 Replies
View Related
Jul 28, 2007
hi there, i have a payment page which uses javascript to calculate payments and what remains etc. That all works fine, the problem i have is that when you are finished and you go to the next page it should save all of the records to the order table where the order_id = a querystring. Now i have tried using an insert method and an update method, not really sure whats the difference when putting data into an existing record. What happens though is that i can save the contents of labels etc but it wont save the content of dropdown lists (of which there are 2) i just cant work it out, i have posted my code below
string strOrderID = Convert.ToString(Request.QueryString["OrderID"]);
string strDiscountPercent = Convert.ToString(5656);double dblDiscountMoney = Convert.ToDouble(txtDiscountMoney.Text);
string strPaymentMethod1 = ddlPaymentMethod1.SelectedValue;double dblPaymentAmount1 = Convert.ToDouble(txtPaymentAmount1.Text);
string strPaymentRecipt1 = txtPaymentRecipt1.Text;string strPaymentMethod2 = ddlPaymentMethod2.SelectedValue;
double dblPaymentAmount2 = Convert.ToDouble(txtPaymentAmount2.Text);string strPaymentRecipt2 = txtPaymentRecipt2.Text;
string sConnectionStringCustInfo = "my connection string";
SqlConnection objConnOID = new SqlConnection(sConnectionStringCustInfo);
//This is the sql statement.using (objConnOID)
{
objConnOID.Open();
string sqlUpDate = "UPDATE tbl_order SET discount_Percent = " + txtDiscountPercent.Text +
", discount_money = " + dblDiscountMoney + ", payment_method1 = " + strPaymentMethod1 + =========== this is the problem line here!
", payment_amount1 = " + dblPaymentAmount1 + ", payment_ref1 = " + strPaymentRecipt1 +
", payment_amount2 = " + dblPaymentAmount2 +", payment_ref2 = " + strPaymentRecipt2 +
"WHERE order_ID = " + strOrderID;
SqlCommand objCmd1 = new SqlCommand(sqlUpDate, objConnOID);
try
{
objCmd1.ExecuteNonQuery();
}
and because it throws an error it wont update the database with any other record. does anyone have any ideas, i have spent hours last night trying to figure this one out and im sure its simple! but i need some help!
Cheers
Jez
View 5 Replies
View Related
Apr 1, 2008
i have an sqldatasource that has a 1 row dataset
how can i read these values to labels?
thanks
View 1 Replies
View Related
Oct 10, 2007
I addressed this situation in another thread, but since the thread had not been updated for some time I felt a new thread may have been warranted to included uptodate information and requests for further updates.
I will refresh the topic's primary issue:
When using a matrix, a developer wanted to provide column headers atop the columns to help users distinquish between multiple columns of the same relative data type(columns of digits, etc.)
The space in the upper left corner of the matrix will create a void that cannot be broken down or divided so that a column header label can be applied. It's either one label for the whole void or nothing at all.
VOID
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
A poster suggested placing a rectangle inside the voided area above.
Rectangle
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
Then placing a series of textboxes within the rectangle area aligned to the width of the row columns
Rectangle
Upper Group Column
rectangle txtbox
rectangle txtbox
rectangle txtbox
rectangle txtbox
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
The problem is that when the report is run and rendered the rectangle txboxes are no longer aligned at the bottom. Even though the text within the textboxes is set to the bottom.
Instead the rendered version appears like this.
rectangle txtbox
rectangle txtbox
rectangle txtbox
rectangle txtbox
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
Thus rather than having the labels inside the rectangle textboxes aligned at the bottom so that they appear more in-line with their assigned columns, they are automatically top-justified and this makes the labels look awkward.
So does anyone have any suggestions on how I can get the rectangle textboxes to be aligned adjacent to the tops of the row columns so that their labels appear in-line with their appropriate columns?
Thanks in advance.
View 1 Replies
View Related
Jul 5, 2006
I have a horizontal barchart with integer values, both positive and negative. Major gridlines are shown and I have not specified the interval or the label format. Sometimes the gridline labels (Y axis) show decimal values. Is there anyway to format these? I have tried to format the labels as "#0" but then I see labels occuring twice. I have also played with the intervals, but then sometimes, depending on the values, the zero line is not being shown.
Does anybody have an idea?
Thanks in advance!
Joos
View 4 Replies
View Related
Feb 3, 2005
If I have the raw data dumped into a big table as following:
Date P R M E Date P R M E Date P R M E Date P R M E
1/1/90 1 2 3 4 1/1/90 2 3 4 5 1/1/90 3 4 5 6 1/1/90 4 5 6 7
...
1/1/05 1 2 3 4 1/1/05 2 3 4 5 1/1/05 3 4 5 6 1/1/05 4 5 6 7
And this table has a repeating block [D, P, R, M,E] 300 times. Is it possible to write a loop query/stored procedures/triggers (or whatever it is) to read each repeating block and stack them on top of each other to insert into another table which has the same structure as following?
Look like this?
Date P R M E
1/1/90 1 2 3 4
...
1/1/05 1 2 3 4
1/1/90 2 3 4 5
...
1/1/05 2 3 4 5
1/1/90 3 4 5 6
...
1/1/05 3 4 5 6
If there is a solution would you please elaborate, example?
Thank you for the help.
shiparsons
View 14 Replies
View Related
Jul 20, 2005
Hello all,Thinking about building a new database in the enterprise addition ofsql server and using some horizontal parititioning techniques in orderto accomaodat what will eventually be a monster huge database.Can you share some hard earned experience, gotchas, etc...with me? Wewill be setting up this server on a SAN array that will be made up ofjust one or two huge virtual RAID10 volumes and I am also wonderingabout the wisdom of this? Its simple and should work, but is thatconfig relevant in any way specifically to our plan to partition?
View 2 Replies
View Related
Mar 7, 2008
Hello frnds......what does mean by Horizontal Partitioning ?
View 4 Replies
View Related
Mar 7, 2008
Sorry for the earliear question as itself is wrong ?
This is a right questions and what does it mean by ?
View 5 Replies
View Related
Jul 8, 2006
how can i use concatenation to query the results horizontally?
example output:
CustomerID=1002, Name=Mr Anderson, City=NY
View 10 Replies
View Related
Aug 1, 2013
I want to line up across the top of a cross tab Jan-12 Feb-12 ... July-13 Aug-13 up to and including the latest month in the db. What's the best way to achieve this?
I currently create crosstabs with case statements as follows:
select
sum(case month(date) when 1 then value) as Jan,
sum(case month(date) when 2 then value) as Feb
from db
I figured you could create some sort of while loop for the case statements but I can't get the syntax right.
Or another strategy would be to use the Pivot method and build [Jan], [Feb], [Mar] etc through a loop?
View 3 Replies
View Related
Jul 9, 2007
I am creating a report to be used to print mailing labels. Size 1" x 2 5/8" (3 columns of 10 labels). I seem to have everything but the vertical spacing working properly. I have used a rectangle set to the size of the labels which contains a list box containing text boxes containing expressions to pull in the fields. Some of the street addresses are two lines with the majority being only one line.
I have joined the two fields containing the street addresses and inserted a new line command so each field will print on its own line but yet be contained within the same text box. Everything except the text box containing the street addresses are set to not increase or decrease. My problem is that on the pages of the report where labels vary between the one and two line street addresses the labels tend to creep down which in some cases causes data to be printed over two labels. Any ideas on what I can do to format these to print properly?
Thanks
View 44 Replies
View Related
Sep 22, 2007
Hi,
I need to create address labels from report builder. I can create the same from report designer using list box and text boxes. But not able to create the same from report builder as it is supporting only one layout - table (Columnar) for table type. Can any one help me to place the filelds in row wise rather than column wise.
View 3 Replies
View Related
Aug 15, 2007
I am trying to print mailing labels and suppress optional address lines to eliminate white space while maintaining label alignment. This is what I am trying but it does not work.
I create a function that determines the length of a field (i.e. street) and increments a counter if the length is zero. It also takes a second parameter that detremines whether to reset the counter. I then use the function in the visibility each row of the label table. Example iif(Code.LineLen(Fields!Street.Value)=0,True,False). I place this on the visibility of each row except the last as that is City,State,Zip and is required. On this last row the expession I use is
=Fields!city.Value & ", " & Fields!state.Value & " " & Fields!zip.Value & iif(Code.LineCount<5,StrDup(5-Code.LineCount,vbCRLF),""). What this is intended to do is print a carraige return and line feed for every row that did not print. Instead no line feeds occur. I have verified that the Code.LineCount is indeed calculating correctly (I printed the value). I've removed the conditional to make sure it has no issues but again nothing. For clarification the code block I am using is this.
Public LineCount as Integer=0
Function LineLen(byval LineIn as string,byval IsFirst as boolean) as Integer
if IsFirst=True then
LineCount=1
end if
If len(LineIn)>0 then
LineCount=LineCount+1
end if
LineLen=Len(LineIn)
end Function
So if anyone either knows why the line feeds do not occur or a better way to handle this please let me know. Thanks.
View 1 Replies
View Related
Jul 3, 2015
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
View 5 Replies
View Related
Sep 11, 2007
I have a chart that presently has two groupings on the x-axis: Year & Qtr. I'd like the Year labels to be one color, and the Qtr labels to be a different color. (All year labels should be Black, all Qtr labels should be Blue). I can see that an expression can be written to handle this dynamically, but I'm banging my head trying to figure it out...
Any help?
Thanks in advance,
Pete
View 1 Replies
View Related
Apr 16, 2002
I am testing horizontal partitions to see whether it is a feasible
option for a project. IF I have a composite Primary Key and the
constraint column (a part of the Primary Key) that helps the
partitioned view is defined with DateTime Data Type, select on a restricted set of data through a partitioned view still tries to access all the tables instead of just one table that contains the data. Is this the case or am I
missing something ?
Any help on this is appreciated.
Here is what I am trying to do.
************************************************** **************
CREATE TABLE [dbo].[tst01] (
[Dt] datetime NOT NULL ,
[TID] int NOT NULL ,
[Nm] [char] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[tst02] (
[Dt] datetime NOT NULL ,
[TID] int NOT NULL,
[Nm] [char] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[tst01] ADD
CONSTRAINT [PK_tst01] PRIMARY KEY CLUSTERED
(
[Dt], [TID]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[tst02] ADD
CONSTRAINT [PK_tst02] PRIMARY KEY CLUSTERED
(
[Dt], [TID]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[tst01] ADD
CONSTRAINT [CK_tst01] CHECK (Dt between '11/1/2002' and '11/30/2002')
GO
ALTER TABLE [dbo].[tst02] ADD
CONSTRAINT [CK_tst02] CHECK (Dt between '12/1/2002' and '12/31/2002')
GO
insert into tst01 values('11/1/2002', 1, 'SS')
insert into tst01 values('11/2/2002', 2, 'KK')
insert into tst01 values('11/3/2002', 3, 'DD')
Go
insert into tst02 values('12/1/2002', 1, 'LL')
insert into tst02 values('12/2/2002', 2, 'MM')
insert into tst02 values('12/3/2002', 3, 'GG')
Go
CREATE VIEW vtst AS
SELECT * FROM tst01
UNION ALL
SELECT * FROM tst02
Go
SELECT * FROM vtst WHERE dt = '11/1/2002'
************************************************** *********
When I look at the Execution Plan, it shows that clustered index seek
would be performed on both the tables.
StmtText
---------------------------------------------------------------------------------------------------------------------------------
|--Concatenation
|--Filter(WHERE:(STARTUP EXPR(Convert([@1])<='Nov 30 2002
12:00AM' AND Convert([@1])>='Nov 1 2002 12:00AM')))
| |--Clustered Index
Seek(OBJECT:([test].[dbo].[tst01].[PK_tst01]),
SEEK:([tst01].[Dt]=Convert([@1])) ORDERED FORWARD)
|--Filter(WHERE:(STARTUP EXPR(Convert([@1])<='Dec 31 2002
12:00AM' AND Convert([@1])>='Dec 1 2002 12:00AM')))
|--Clustered Index
Seek(OBJECT:([test].[dbo].[tst02].[PK_tst02]),
SEEK:([tst02].[Dt]=Convert([@1])) ORDERED FORWARD)
Thanks,
Sathish
View 1 Replies
View Related
Nov 29, 2012
I'm running SQL Server 2008 Standard.I need to create a query that has data from multiple columns (Columns 1-6 with coresponding Date started and Date Completed data) displayed vertically, but also has the column name the preeceeding column to identify it...along with other data (Record number, status).
Record Number, Status, Column Name, Date Started, DateCompleted
1, Open, Column 1, 1/1/2012, 2/1/2012,
2, Hold, Column 2, 1/3/2012, 3/1/2012,
1, Open, Column 3, 2/5/2012, 4/6/2012,
3, Closed, Column 4, 5/10/2012, 7/25/2012,
2, Hold, Column 5, 3/9/2012, 4/1/2012,
1, open, Column 6, 10/10/2012, 12/12/2012,
View 5 Replies
View Related
Feb 24, 2004
I'm considering using horizontal partitions to separate my data by year.
For example, SomeTable_2004, SomeTable_2003, etc. This works well for backups, maintenance, etc. because I'm working with 150+ GB of data. I'll be a partitioned view for queries.
However, I'm new at this and have a few questions. I would also like to do partitioned updates or inserts. But I need to make sure that the tables don't use similar primary keys. Does that make sense? I need to make sure that the primary keys from the first table are not used again in the second table.
SomeTable_2003
primary keys: 1,5,8,9,15
SomeTable_2004
primary keys: 2,3,4,10
I don't really care what keys are used on what table, as long as they are different. I have apps that already use this data, and I don't want to change the application logic.
Thanks,
T
View 1 Replies
View Related
