Horrible Table Needs Help
Feb 12, 2008
I'm having a problem normalizing this table that I have. I know I'm breaking the rules by having redundant data in the same table but I'm not sure how I'm going to calculate a penalty and find the total score. Can some lead me in the right direction fix this table for me?
Code Snippet
USE [aidms]
GO
/****** Object: Table [dbo].[PerfOrder] Script Date: 02/11/2008 16:40:54 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[PerfOrder](
[PerfOrderID] [int] IDENTITY(1,1) NOT NULL,
[ShowID] [int] NOT NULL,
[DivisionID] [int] NOT NULL,
[OrganizationID] [int] NOT NULL,
[PerformanceShiftID] [int] NOT NULL,
[Cancelled] [bit] NOT NULL,
[DateRegistered] [datetime] NOT NULL,
[PerformanceTime] [datetime] NOT NULL,
[ReadyToBeJudged] [bit] NOT NULL,
[FirstJudgeID] [int] NULL,
[FirstCaptionID] [int] NULL,
[ScoreA1] [decimal](18, 0) NULL,
[ScoreB1] [decimal](18, 0) NULL,
[SecondJudgeID] [int] NULL,
[SecondCaptionID] [int] NULL,
[ScoreA2] [decimal](18, 0) NULL,
[ScoreB2] [decimal](18, 0) NULL,
[ThirdJudgeID] [int] NULL,
[ThirdCaptionID] [int] NULL,
[ScoreA3] [decimal](18, 0) NULL,
[ScoreB3] [decimal](18, 0) NULL,
[PenaltyScore] [decimal](18, 0) NULL,
[TotalScore] [decimal](18, 0) NULL,
CONSTRAINT [PK_PerfOrder] PRIMARY KEY CLUSTERED
(
[PerfOrderID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: ForeignKey [FK_PerfOrder_Captions] Script Date: 02/11/2008 16:40:55 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Captions] FOREIGN KEY([FirstCaptionID])
REFERENCES [dbo].[Captions] ([CaptionID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Captions]
GO
/****** Object: ForeignKey [FK_PerfOrder_Captions1] Script Date: 02/11/2008 16:40:55 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Captions1] FOREIGN KEY([SecondCaptionID])
REFERENCES [dbo].[Captions] ([CaptionID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Captions1]
GO
/****** Object: ForeignKey [FK_PerfOrder_Captions2] Script Date: 02/11/2008 16:40:56 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Captions2] FOREIGN KEY([ThirdCaptionID])
REFERENCES [dbo].[Captions] ([CaptionID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Captions2]
GO
/****** Object: ForeignKey [FK_PerfOrder_Division] Script Date: 02/11/2008 16:40:56 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Division] FOREIGN KEY([DivisionID])
REFERENCES [dbo].[Division] ([DivisionID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Division]
GO
/****** Object: ForeignKey [FK_PerfOrder_Judges] Script Date: 02/11/2008 16:40:57 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Judges] FOREIGN KEY([FirstJudgeID])
REFERENCES [dbo].[Judges] ([JudgeID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Judges]
GO
/****** Object: ForeignKey [FK_PerfOrder_Judges1] Script Date: 02/11/2008 16:40:57 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Judges1] FOREIGN KEY([SecondJudgeID])
REFERENCES [dbo].[Judges] ([JudgeID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Judges1]
GO
/****** Object: ForeignKey [FK_PerfOrder_Judges2] Script Date: 02/11/2008 16:40:58 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Judges2] FOREIGN KEY([ThirdJudgeID])
REFERENCES [dbo].[Judges] ([JudgeID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Judges2]
GO
/****** Object: ForeignKey [FK_PerfOrder_Organization] Script Date: 02/11/2008 16:40:58 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Organization] FOREIGN KEY([OrganizationID])
REFERENCES [dbo].[Organization] ([OrganizationID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Organization]
GO
/****** Object: ForeignKey [FK_PerfOrder_PerformanceShift] Script Date: 02/11/2008 16:40:59 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_PerformanceShift] FOREIGN KEY([PerformanceShiftID])
REFERENCES [dbo].[PerformanceShift] ([PerformanceShiftID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_PerformanceShift]
GO
/****** Object: ForeignKey [FK_PerfOrder_Show] Script Date: 02/11/2008 16:40:59 ******/
ALTER TABLE [dbo].[PerfOrder] WITH CHECK ADD CONSTRAINT [FK_PerfOrder_Show] FOREIGN KEY([ShowID])
REFERENCES [dbo].[Show] ([ShowID])
GO
ALTER TABLE [dbo].[PerfOrder] CHECK CONSTRAINT [FK_PerfOrder_Show]
GO
View 2 Replies
ADVERTISEMENT
Apr 2, 2008
Hi,
I have been trying to solve this issue for around 8 hours, now. Can someoone help me?
I have two tables:
Employee (
EMPLOYEE_ID INT PRIMARY KEY,
NAME VARCHAR(25)
)
E.G.:
1 Mark
2 Tracey
3 Jim
STRUCTURE (
SUPERVISOR_ID INT,
SUBORDINATE_ID INT
)
E.G.:
1 3
2 3
I need to get a query that gives me the following query:
SUPERVISOR_ID, SUPERVISOR_NAME, SUBORDINATE_ID, SUBORDINATE_NAME
I think that the SQL is going to go recursive and I think that this can be done reasonably easily (sadly, I have struck out so far), but how?
Thanks in advance,
QuietLeni
View 7 Replies
View Related
Feb 11, 2008
Hello! We are having a strange problem with Reporting Services 2005. Our RS server is located in a DMZ with the supporting RS database housed in our internal network. We have a batch of reports that perform well when rendering to browsers in our internal network. However, when accessing these same reports externally, the reports take a very long time to render. The difference between internal vs. external is huge; we are looking at maybe a minute tops to render the report from an internal browser vs. 10-15 minutes from an external client browser. The website and reports are setup for anonymous access, so it shouldnt be an authentication problem.
The RS execution log doesnt indicate much difference between the two. The data retrieval does take a little longer (only a second or two), according to the log, for an external request. But still, the times recorded in the Execution Log dont match at all what we are experiencing for external requests.
The various logs, both for reporting services and IIS arent picking up any anomalies either and Im at my wits end as to what else I can use to try and troubleshoot this problem. Has anyone seen this behavior before, or have any ideas what might shed some light on this?
View 2 Replies
View Related
May 21, 2008
I had a nerve-wracking experience with xp_cmdshell today.
In SSMS, I ran a command to "cd" to a directory, then "rename" some files in that directory. I made the ignorant mistake of running the commands separately - NEVER NEVER DO THIS.
What happened was, by the time I ran the "rename" command it defaulted to the "system32" directory and started renaming files there instead... talk about !!$#*@(!-up!
Has any ever done this, or heard about this horrible experience before? I am trying to document cases of this, so that I don't look like the complete idiot that I am.
View 2 Replies
View Related
Apr 11, 2007
Hello, I have a sql server installed on a server in my server room.
The problem I have is that when I try to connect to the server, it takes a loooooooooong time to open the connection. Even when connecting through the Sql Server Management Studio it takes about 30 seconds just to open the connection.
Can anybody help me with some pointers on how to troubleshoot this issue? It only happens with this specific server
It might be a configuration issue, but where can I find information on how to configure it correctly?
View 2 Replies
View Related
Jun 13, 2006
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.
View 3 Replies
View Related
Jan 31, 2008
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
View 3 Replies
View Related
Mar 29, 2007
Hi
I am having a table called as status ,in that table one field is there i.e. currentstatus.
the rows which are having currentstatus as "ticket closed",i want to move those rows into other table called repository which is having same table structure as status table.
I can do programatically.
but is there any way for every 3 months system has to check and do this action means moving to repository table automatically?
Please help me.
Thanks.
View 1 Replies
View Related
Jul 24, 2015
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
View 4 Replies
View Related
Nov 21, 2006
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies
View Related
Jan 9, 2008
Hi all,
The following dbo.Tables of Northwind.mdf in my .SQLEXPRESS (SQL Server Management Studio Express) are missing:
dbo.Categories
dbo.CustomerCustomerDemo
dbo.CustomerDemographics
dbo.Customers
dbo.Employees
dbo.EmployeeTerritories
dbo.Order Details
dbo.Orders
dbo.Products
dbo.Regions
dbo.Shippers
dbo.Suppliers
dbo.Territories.
But, I have these dbo.Tables in a different Database "xyzDatabase". How can I copy each of these dbo.Tables to the another blank dbo.Table of Northwind Database?
I right clicked on the dbo.Categories and I saw the following thing:
dbo.Categories
New Table...
Modify
Open Table
Script Table as |> CREATYE To |>
DROP To |>
SELECT To |>
INSERT To |> New Query Editor Window
File....
Clipboard
UPDATE To |>
DELETE to |>
From the above observation,I think it is possible to copy the dbo.Table from the one Database to the Northwind Database that needs to be repaired. Please help and advise me how to do this task or tell me where I can find the Microsoft document that gives the details of this X-copy thing.
Thanks in advance,
Scott Chang
P. S. I am using VB 2005 Express to create a project to learn "Calling Stored Procedures with ADO.NET" (see Paul Kimmel's article in http://www.developer.com/db/article.php/3438221) that needs the dbo.Tables of Northwind Database and my Northwind Database has been screwed up for quite a while and needs a big repair.
View 3 Replies
View Related
Aug 29, 2007
which is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies
View Related
May 29, 2008
'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
View 1 Replies
View Related
Dec 1, 2006
I have one control table to store all related table name
Table ID TableName
1 TableA
2 TableB
In Table A:
RecordID Value
1 1
2 2
3 3
In Table B:
RecordID Value
1 1
2 2
3 3
How can I get the result by select the Table list first and then combine the data in table A and table B?
Thank you!
View 1 Replies
View Related
Jan 26, 2006
Just wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.
View 2 Replies
View Related
Mar 20, 2008
Hi thanks for looking at my question
Using sqlServer management studio 2005
My Tables are something like this:
--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39
Well this might look like a very basic error:
I get this Error after trying to delete something from Table €œEmployee€?
The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €œBranch€? entry, basically each entry in €œbranch€? and €œEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €œON DELETE CASCADE€? or something?
Thanks
View 8 Replies
View Related
Sep 17, 2007
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
View 1 Replies
View Related
Nov 29, 2006
Banti writes "IF i create temporary table by using #table and ##table then what is the difference. i found no difference.
pls reply.
first:
create table ##temp
(
name varchar(25),
roll int
)
insert into ##temp values('banti',1)
select * from ##temp
second:
create table #temp
(
name varchar(25),
roll int
)
insert into #temp values('banti',1)
select * from #temp
both works fine , then what is the difference
waiting for ur reply
Banti"
View 1 Replies
View Related
Jun 9, 2014
I am having a problem in creating query for this exciting scenario.
Table A
ID ItemQtyCreatedDatetime
W001 CB112014-06-03 20:30:48.000
W002 CB112014-06-04 01:30:48.000
Table B
IDItemQtyCreatedDatetime
A001 CB112014-06-03 19:05:48.000
A002 CB112014-06-03 20:05:48.000
A003 CB112014-06-03 21:05:48.000
A004 CB112014-06-04 01:05:48.000
A005 CB112014-06-04 02:05:48.000
I would like to return the nearest date of Table B in my table like for
ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000
ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000
View 3 Replies
View Related
May 23, 2007
Is there any Posibility to change a User Table to System Table.
How to create one system table.
I am in Big mess that One of the Table I am using is in System Type.
I cant Index the same. Is there any Mistake we can change a user table to system table.....
View 9 Replies
View Related
Sep 9, 2005
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies
View Related
Apr 1, 2014
I am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date
01 32 London 01-01-2013
02 35 Lagos 02-01-2013
03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type
11 AGE col_integer
22 City col_character
33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
Table Name: Destination
SrcID MetaID col_int col_char col_date
01 11 32 - -
01 22 - London -
01 33 - - 01-01-2013
02 11 35 - -
02 22 - Lagos -
02 33 - - 02-01-2013
03 11 36 - -
03 22 - NY -
03 33 - - 03-01-2013
View 7 Replies
View Related
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
Feb 11, 2015
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
View 3 Replies
View Related
Apr 10, 2015
I created am inventory table with few columns say, Servername, version, patching details, etc
I want a tracking of the table.
Let's say people are asked to modify the base table and I want a complete capture of the details modified and the session of the user ( ) who (system_user) is actually modifying the details.
View 1 Replies
View Related
Nov 18, 2014
I have 2 tables: Order(ID, Quantity) and Product(ID,Name, Price) and I want to add a calculated field in Order table based on the price column in the Product table. How do i do that?
this query returns the values i want in the table.
select a.quantity * b.price
from tblCustomerPurchases as a
join tblProduct as b
on a.ID=b.ID
View 17 Replies
View Related
Sep 11, 2007
SQL Server 2005 SP2 Error: Script failed for Table 'dbo.TableName'
I keep getting this error when trying to generate a snapshot for transact replication.
Here is the publishing table schema:
CREATE TABLE [dbo].[viMediaPlaylist](
[MemberID] [bigint] NOT NULL,
[xmlPlaylist] [xml](CONTENT [dbo].[viMediaPlaylistCollectionSchema]) NOT NULL,
PRIMARY KEY CLUSTERED
(
[MemberID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [PRIMARY]
) ON [PRIMARY]
I tried the following:
#1)Create table schema at the subscriber manually, and change package to Keep object as is. Got the same error during snapshot.
#2Filtered replication to NOT include XML column. This worked, and no error was generated, replication was up and running.
So my question is, what is the problem with XML column being replicated?
Any ideas how i can make this work? At this point i'm not sure what the problem is with the xml column, but it seems like ti tries to run schema script, but i'm not asking it to create the schema i already did it myself. Thanks!
Here is a log dump from the distributor:
2007-09-11 16:40:14.56 SQL Command dump
2007-09-11 16:40:14.56 ================
2007-09-11 16:40:14.56 Server: SQL02
2007-09-11 16:40:14.56 Database: Video
2007-09-11 16:40:14.56 Command Text: sys.sp_releaseapplock
2007-09-11 16:40:14.56 Parameters:
2007-09-11 16:40:14.56 @Resource = SQL02-Video_viMediaPlaylis-71
2007-09-11 16:40:14.56 @LockOwner = Session
2007-09-11 16:40:14.56 @DbPrincipal = db_owner
2007-09-11 16:40:15.17 [0%] The replication agent had encountered an exception.
2007-09-11 16:40:15.17 Source: Unknown
2007-09-11 16:40:15.17 Exception Type: Microsoft.SqlServer.Management.Smo.FailedOperationException
2007-09-11 16:40:15.17 Exception Message: Script failed for Table 'dbo.viMediaPlaylist'.
2007-09-11 16:40:15.17 Message Code: Not Applicable
2007-09-11 16:40:15.17
2007-09-11 16:40:15.17 Call Stack:
2007-09-11 16:40:15.17 Microsoft.SqlServer.Management.Smo.FailedOperationException: Script failed for Table 'dbo.viMediaPlaylist'. ---> Microsoft.SqlServer.Management.Smo.UnsupportedVersionException: Either the object or one of its properties is not supported on the target server version.
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.GetTypeDefinitionScript(ScriptingOptions so, SqlSmoObject oObj, String sTypeNameProperty, Boolean bSquareBraketsForNative)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.AppendScriptTypeDefinition(StringBuilder sb, ScriptingOptions so, SqlSmoObject oObj, SqlDataType sqlDataType)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Column.ScriptDdlCreateImpl(StringBuilder sb, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Column.ScriptDdl(StringCollection queries, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.ScriptTableInternal(ScriptingOptions so, StringBuilder sb, ColumnCollection columns, IndexCollection indexes)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.GetTableCreationScript(ScriptingOptions so, StringBuilder sb)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Table.ScriptCreate(StringCollection queries, ScriptingOptions so)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithListWorker(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 --- End of inner exception stack trace ---
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(SqlSmoObject[] objects)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, Table smoTable)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
2007-09-11 16:40:15.17 at Microsoft.SqlServer.Replication.AgentCore.Run()
View 6 Replies
View Related
Aug 31, 2007
Hello,
Maybe anyone have done that before?
I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables.
i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.
I made such SSIS package. set ole db source data access mode to table or view name variable.
set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables)
but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.
how to solve that problem?
View 5 Replies
View Related
Apr 23, 2008
Hi... I was hoping if someone could share me some thoughts with the issue that I am having at the moment.
Problem: When I run the package in my local machine and update local SS DB/table - new records writes OK in the table. BUT when I changed my destination meaning write record into another physical SS DB/table there is no INSERT data occurs. AND SO when I move/copy over that same package into another server (e.g. server that do not write record earlier) and run it locally IT WORKS fine too.
What I am trying to do is very simple - Add new records in a SS table using SSIS . I only care for new rows and not even changed rows.
Here is my logic -
1. Create Ole DB source to RemoteSERVER - using SELECT stmt
2. I have LoopUp component that will look for NEW records - Directs all rows that don't find match and redirect rows (error output).
3. Since I don't care for any rows that is matched in my lookup - I do nothing or I trash the rows
4. I send the error rows (NEW rows) into OleDB destination
RESULTS when I run the package locally and destination table is also local - WORKS FINE;
But when I run the package locally and destination table is in another Sserver (remote) - now rows is written.
The package is run thru BIDS manually so there is no sucurity restrictions attached to it.
I am not sure what I am missing. And I do not see error in my package either. It is not failing.
Thanks in advance!
View 6 Replies
View Related
Apr 10, 2008
How do I use table names stored in variables in stored procedures?
Code Snippetif (select count(*) from @tablename) = 0 or (select count(*) from @tablename) = 1000000
I receive the error 'must declare table variable '@tablename''
I've looked into table variables and they are not what I would require to accomplish what is needed.
After browsing through the forums I believe I need to use dynamic sql particuarly involving sp_executesql. However, I am pretty new at sql and do not really understand how to use this and receive an output parameter from it(msdn kind of confuses me too). I am tryin got receive an integer count of the records from a certain table which can change to anything depending on what the user requires.
Code Snippet
if exists(Select * from sysobjects where name = @temptablename)
drop table @temptablename
It does not like the 'drop table @temptablename' part here. This probably wouldn't be an issue if I could get temporary tables to work, however when I use temporary tables i get invalid object '#temptable'.
Heres what the stored procedure does.
I duplicate a table that is going to be modified by using 'select into temptable'
I add the records required using 'Insert into temptable(Columns) Select(Columns)f rom TableA'
then I truncate the original table that is being modified and insert the temporary table into the original.
Heres the actual SQL query that produces the temporary table error.
Code Snippet
Select * into #temptableabcd from TableA
Insert into #temptableabcd(ColumnA, ColumnB,Field_01, Field_02)
SELECT ColumnA, ColumnB, Sum(ABC_01) as 'Field_01', Sum(ABC_02) as 'Field_02',
FROM TableB
where ColumnB = 003860
Group By ColumnA, ColumnB
TRUNCATE TABLE TableA
Insert into TableA(ColumnA, ColumnB,Field_01, Field_02)
Select ColumnA, ColumnB, Sum(Field_01) as 'Field_01', Sum('Field_02) as 'Field_02',
From #temptableabcd
Group by ColumnA, ColumnB
The above coding produces
Msg 208, Level 16, State 0, Line 1
Invalid object name '#temptableabcd'.
Why does this seem to work when I use an actual table? With an actual table the SQL runs smoothly, however that creates the table names as a variable problem from above. Is there certain limitation with temporary tables in stored procedures? How would I get the temporary table to work in this case if possible?
Thanks for the help.
View 6 Replies
View Related
Jun 25, 2007
Hi, all experts here,
I am wondering if tempdb stores all results tempararily whenever I query a large fact table with over 4 million records which joins another dimension table? Since each time when I run the query, the tempdb grows to nearly 1GB which nearly runs out all the space on my local system drive, as a result the performance totally down. Is there any way to fix this problem? Thanks a lot in advance and I am looking forward to hearing from you shortly for your kind advices.
With best regards,
Yours sincerely,
View 11 Replies
View Related
May 18, 2006
Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
View 7 Replies
View Related
Dec 16, 2007
Hello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
View 5 Replies
View Related
