How SSIS Works With Cluster SQL And Non Cluster SSIS Service?
Mar 14, 2008
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
View 1 Replies
ADVERTISEMENT
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
May 11, 2006
HI
What is the advantage of running SQL Server Integration Services on a cluster.
Regards, Balaji Thiruvenkataraju
View 6 Replies
View Related
Apr 2, 2008
I am currently at a site that has two instances on the same node. How do I help them get SSIS to work. I get the message that "SSIS will not work on a multy instance node". I this the final answer or is there a workaround? Tom.
View 4 Replies
View Related
Jan 17, 2007
I'm still new to SSIS packages and I'm NOT a developer. I am in the process of doing preliminary/prepatory work for migrating our SQL 2000 platforms to SQL 2005.
I am having a REAL headache with migrating/moving DTS packages from SQL 2000 to SQL 2005. Here are things that I know :
1. I know that some packages cannot be migrated due to ActiveX issues and other issues. Fine.
2. I know that I can install DTS backwards compatibility components on the server in order to be able to edit the DTS packages using a SQL 2000 DTS GUI. Fine.
3. I know that I can use the Migration wizard to migrate packages (and that some of them can't be migrated this way). Fine.
Here's what I don't know/or am conjecturing:
1. In a clustered environment, I have to edit the <%Install Path%>/90/DTS/Bin/MsDtsSrvr.ini.xml file to set the <ServerName> property to the Virtual Server name. Correct? Why can't M$ do this for me?
2. Do I HAVE to export the SSIS package to a .DTSX file in order to be able to edit it with Visual Studio? Is there ANY way around this?
3. If I am running in a clustered environment and I use the File System for storing packages, then the pacakges must be stored on a shared volume, right?
4. I did not find SQL Server Integration services on the B- (Passive) node. Do I have to install it separately onto the B server (much like having to install the Client Tools)?
If anyone has some guidance or tips on running SSIS in this brave, new, wonderful world, I would sure appreciate it.
And yes, I am going to go out right now and order a new book on SSIS.
Regards,
hmscott
View 3 Replies
View Related
Apr 25, 2006
We have just installed a new SQL 2005 Clustered server and loaded integration services. However it appears that integrations services may not work properly in a clustered environment.
So can integration services be setup on a clustered SQL 2005 server?
View 4 Replies
View Related
Apr 23, 2007
OK so I am aware that the SSIS service can be clustered relatively easily but my problem is a bit more complex I believe.
I have an ActiveActiveActive 3 node cluster running Windows 2003 sp1 all running SSIS packages. What I need is a solution to having an instance fail to another node and still be able to run scheduled SSIS packages through the SQL Agent.
The solution that I have come up with is to have a single network share for all three instances of SSIS running locally on the individual nodes. I have removed the ability for SSIS to look in MSDB by altering the config file and reference only the Packages share on the network for accessability. They all share the same config file on the share as well. The share structure looks something like this simplified example.
\server1SSISConfiguration
\server1SSISPackages
\server1SSISPackagesInstance1
\server1SSISPackagesInstance2
\server1SSISPackagesInstance3
Once I change the registry to point to the config file all three instances can access the Instance1, 2 or 3 directories.
This works ok for the jobs, and I can access the stored packages under the file system folder only if I'm remotely connected to that particular physical server hosting the service or on the console. The problem I am having though is when users or I attempt to access the SSIS Engine through SSMS from our locale machines. It seems as though SSMS is having trouble with the passthrough of the directory information. On the share I obviously have permissiosn to access the directory structure (full control to be exact) because I can get to it when I access it from SSMS on the server.
This is the error I get...
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The storage location for the folder "File System" cannot be accessed. (MsDtsSrvr)
DETAILS:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetChildren()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren()
===================================
The storage location for the folder "File System" cannot be accessed. (MsDtsSrvr)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetDtsServerPackageInfos(String sPackageFolder, String sServerName)
at Microsoft.SqlServer.Dts.SmoEnum.PackageEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
Any work around or suggestion would be appreciated.
Thanks,
Zach
View 2 Replies
View Related
Nov 9, 2007
Hi,
I have been battling the whole day to get my project working on our sql cluster.
My project contains file system packages parent(control) packages etc. I cannot get any package to execture after deploying and configuring the packages with the manifest.
When I try to execute even a simple package, i get the following error:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
11/09/2007 15:06:59,SGA Staging ETL import,Error,0,BRY-CLUSSQL-1,SGA Staging ETL import,(Job outcome),,The job failed. The Job was invoked by User sgainterface. The last step to run was step 1 (Test).,00:00:00,0,0,,,,0
11/09/2007 15:06:59,SGA Staging ETL import,Error,1,BRY-CLUSSQL-1,SGA Staging ETL import,Test,,Executed as user: SUPERGRPSvcSQL. ...on 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 3:06:59 PM Error: 2007-11-09 15:06:59.45 Code: 0xC0011007 Source: {8B6231A9-8E5B-47BC-B54F-6A448B93B085} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2007-11-09 15:06:59.45 Code: 0xC0011002 Source: {8B6231A9-8E5B-47BC-B54F-6A448B93B085} Description: Failed to open package file "\10.202.29.35SGA Import ConfigsSGA Staging Deployment PackagesActive PackagesSGA ETL Step 1.1 - Prepare Branch Master File.dtsx" due to error 0x80070005 "Access is denied.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML f... The package could not be f... The step failed.,00:00:00,0,0,,,,0
Has anyone ever gotten this error? Is it permission related? I have already granted the sql user for this project ownership over the database but I think that the agent does not have permission to access those file system packages. This might be a problem since it is a file system package...if so, how do I grant the agent access to an NT file system?
Regards
View 3 Replies
View Related
Aug 16, 2007
I have the following setup:
1. Clustered Microsoft SQL Server 2005 (Build 3790: Service Pack 2) with .net 2.0 - Server A
2. Separate server containing the SSIS services (Per Microsoft - SSIS isn't cluster aware). - Server B
I am getting the following error when I run a SSIS package through a scheduled job on the Server A:
Description: The task "Set dynamic file name variable" cannot run on this edition of Integration Services. It requires a higher level edition.
I found the following post that fixes the issue, but I don't want to install SSIS on the SQL Cluster (Server A) because it isn't cluster aware.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=67276&SiteID=1
This package runs fine locally from Visual Studio or from Server B. All of my other SSIS packages run fine on the Server A through the SQL Agent. This package fails on a script task that is setting some dynamic variables. Do I need to install some additional components or service packs to SQL Server on Server A?
I don't want to install SQL Server on the Server B and run the jobs through that agent because we don't have the money for a separate license.
View 10 Replies
View Related
Apr 18, 2014
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
View 2 Replies
View Related
Jan 7, 2008
Greetings,
I need to install the SSIS components on the referenced database server. I believe the SSIS components are cluster aware, so I was planning on just doing add/remove and selecting the components. Rather than breaking the cluster apart to patch the components back to SP1, I was thinking of just running the SP2 install right over the top of the running cluster to bring everything up to SP2.
I'm looking for any suggestions/comments on whether this is the proper way to proceed or if I'm going to have a problem.
TIA
View 1 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
Apr 24, 2008
hello everyone,
I wonder if you can help me with a problem I have trying to support a web based application that uses SQL 2005.
The problem is that the application developers tell me that it is neccessary to stop and restart the SQL service as part of the troubleshooting process when their application stops working. Unfortunately, the customer has our application database on a clustered SQL instance that is used by other applications so they cannot just stop and restart the SQL service because this will have a major impact on all the other instances...
Is there another way that would effectively do the same thing as stopping and restarting the SQL service? I have read that dettaching and re-attaching might do the same but application developers say onlt stopping/restarting services is sufficient to break the connection with the application.
Any advice would be really welcome as I am completely new to SQL and struggling with this!
Many thanks, Nick.
View 5 Replies
View Related
Feb 6, 2001
Hi Guys,
Do any one has a step by step instructions for installing the service pack 2 and 3 on Active/Passive cluster. I installed sqlserver 7.0 in one active/ passive cluster and it worked successfully. Now I followed the instructions as given by microsoft by running the cluster wizard. It removed the virtual server. I made all sqlservr services offline.
When I try installing I couldn't able to install as it is saying "Active virtual server is there run clustered wizard in all the nodes". Now I am in the middle of no where.
Please help me asap.
Thanks in advance,
Anu
View 2 Replies
View Related
Aug 14, 1998
i have a sql cluster setup, and need to change the user account that sqlserver starts with....any ideas? i screwed up and left it using localsystem account and now i can`t get sqlmail to work. i`m trying to avoid having to create the cluster again. any info appreciated.......jim jones
View 1 Replies
View Related
May 15, 2014
How to change the sql service passwords on a SQL 2012 cluster.
View 3 Replies
View Related
Jun 13, 2008
We have a N+1 SQL 2005 x65 SP2 + 3159 cluster which was running fine until the service account which runs Windows cluster and the SQL services was removed as a login from SQL. This was a new setup so the only SQL accounts are (SA) as SA, Windows Domain GROUP's which one group is configured as SA and the cluster account is added to this group. I cannot start SQL service on the cluster now. I've tried logging into one node as the service account which is member of a AD group which has SA rights to SQL as well as my personal account. If anyone knows a way ot fix this without reinstalling I'd appreciate your help.
View 8 Replies
View Related
May 28, 2000
We have successfully been using MSCS with MSSQL7 (SP1) running under NT4 EE
(SP6a), installed in an active/active configuration using, two DELL
PowerEdge 6350 machines. Recently I installed MSSQL7 (SP2), I followed the
instructions that came with SP2, and unclustered the SQL nodes using the
Failover Cluster Wizard, and installed SP2, this was uneventful, and
appeared to install correctly. Next I tried to recluster the SQL nodes
using the Failover Cluster Wizard as directed. This failed with: "Could not
run setup on remote machine. SQL Cluster Setup failed." So I began the
usual research using the usual resources, and have found articles that
discusses this error, and the things to look for when it happens. I have
exhausted all suggestions without success. I appear to have everything
correctly configured. I have enabled Cluster Logging (level 3), following
are the two things I have found that indicate something is wrong:
1. In the SQL Error Log the following gets logged when I run the wizard:
"Attempting to initialize Distributed Transaction Coordinator."
"Failed to obtain TransactionDispenserInterface:
XACT_E_TMNOTAVAILABLE"
2. In the Cluster Log I see the following message repeatedly:
"[ClRtlCopySecurityDescriptor] MakeSelfRelativeSD failed,
0x00000551"
3. In the sqlclstr.log I see the following, without an indication of
which file is missing:
"[reghelp.h:235] : 2 (0x2): The system cannot find the file
specified."
"[clushelp.cpp:166] : 259 (0x103): No more data is available."
"[validate.cpp:147] DeleteTestGroup:OpenClusterResource: 5007
(0x138f): The cluster resource could not be found."
"~~~ XXX InstallRemote failed"
Does anyone have any ideas about what could be causing this problem?
Many thanks in advance.
Christpher Cutts
LifeMasters Supported SelfCare
View 1 Replies
View Related
Aug 26, 2014
This is the 1st time we are building a active/passive cluster with 1 node each. we usually install default instance and setup domain account as service account which will have an spn delegated. Now for active/passive cluster is it ok to use same domain account as service account for both clusters with both creating as default instance again as the windows was built as SERVER1 and SERVER2.
View 4 Replies
View Related
Jun 12, 2015
I am having Windows 2012R2 Std with SQL2012SP2. Trying to add SQL cluster node2 but unable to locate the instance name when I click on drop down button.Understand that SQL Server Agent is required but it is not listed as cluster resource. Therefore, I perform the followingFrom Windows Power Shell with Administrator rights
1. Import-Module FailoverClusters
2. Add-ClusterResourceType "SQL Server Agent" c:windowssystem32SQAGTRES.DLL
Error: Add-ClusterResourceType : Unable to locate the cluster service executable on node1.The network name cannot be found.No problem to ping all cluster related names as well as fail-over to and from next available node.
View 3 Replies
View Related
Jul 4, 2007
hi all
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Any advise?Thanks a lot.
View 3 Replies
View Related
Aug 31, 2006
I'm having problems enabling service broker for DB Mail on a SQL 2005 cluster, when I try to execute this sql it just hangs. Any ideas?
USE master ;
GO
ALTER DATABASE AdventureWorks SET ENABLE_BROKER ;
GO
View 10 Replies
View Related
May 9, 2015
I want to install service pack 3 to my SQL Server 2012 Enterprise running on windows server 2008 R2 Enterprise fail over cluster, I read about the SP installation in technet, its mentioned that the passive node should be patched first and to do this the passive node should be removed from the cluster, I need to know whether I should completely remove the node from windows cluster or remove the node by using SQL Server installer and install the service pack and then add it back to the cluster, Can I do this by pausing the node in cluster and perform the service pack installation ?
View 3 Replies
View Related
Jul 17, 2000
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
View 1 Replies
View Related
