Hello All,
I need to import records from one SQL table to another SQL table. Both tables are in the same database. Does anyone know how?
Thank you,
Tina
Hi,I am having trouble importing data from an excel spreadsheet into MSSQL Server 2000 using DTS Wizard. The DTS import process issuccessfull, no errors, but only 50 rows of approx. 1500 rows of dataare imported. I tried to remove 20 rows in the excel spreadsheet inthe interval row 0-50. When i later ran the import, only 30 rows wereimported. I deleted almost every row in the interval 0-50, with theresult of the import having 0 rows imported (but job ransuccessfully). I decided to delete rows 0-100 in the spreadsheet inorder to see if the resolved the problem, but it didn't. As Isuspected something in the excel file to be the cause, I exported theexcel spreadsheeet to a tab delimited textfile, with only one row. ADTS import resulted in importing approx 100 rows, double the amount ofthe textfile, but the other 1400 rows were not imported. The data inthe column is containing numeric values only.Please help me! What could possibly be the cause of DTS skipping rowslike that. DTS doesn't feel reliable at all :/Regards,Björn
View 3 Replies View RelatedHow can i import records into SQL Compact
I have the information in Access and also the same information in Excel spreadsheets
I dont have a full version of SQL
What are my choices, is there perhaps someone that makes a import program
I am importing records from a text file into the database. The DTS pacakage is dropping some of the records for some reason.
There are no contraints on the table I am importing the records into.
Has anyone experienced this? Any help will be greatly appreciated.
I want to modify a current DTS job I have. It simply copies records from one table to another after a given date. The catch is I only have read priviliges on the source table. I currently delete all the records from the destination table but have to use Query Analyzer to do it and then run the current package that is just a simple select statement. The statement in the DTS job is something like:
SELECT *
FROM tablename
WHERE date_field > '2004-09-30'
I have been running this multiple times per month since every week or so I want to get more recent data to run a couple of reports. The source table is not ours, it is in a different department, so I can only read off of it. The destination server is ours so I have full priviliges there. I assume the fact that the source server allows me limited access that I cannot run a "delete from tablename" first even though it is on our table? Is there another way to set this up? Thanks again. You guys are the best.
ddave
Hello all
I got a Problem when I try to store Data from a Flatfile to a DB.
The following Error appears in the Progress Control:
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_Products_1'. Cannot insert duplicate key in object 'dbo.Products'.".
I have a Flat File Source, and would like to store the needed records in a DB.
In Column 0 in the Flatfile I have multiple Entries with equal Values.
In the DB this Column is set as Primary Key and can only have one Record with the same Value in this Column.
How can I read out (or store) only one Record with the same Value from the Flatfile to store it in the DB?
How can I check if there is a Record from the Flatfile in the DB with the same value in the Primary Key?
How can I change any of the remaining Columns with different Values in the DB to match with the Flatfile?
Thanks in advance for any answer
Chaepp
Hello,
I am attempting to import a fixed width flat file into a SQL Server table. When I import the file, 704 records don't make it into the table. I know this because if I do the import with MS Access 2003 into an Access table, all of the records from the flat file make it into the table. The flat files have a .txt extension.
The only possible problem that I can see is that some of the rows in the flat file do not contain the full set of characters. When I do the import into SQL Server and create a table on the fly, I still end up 704 records short. There are no error messages during or after the import.
I suppose I could isolate some of the missing records, put them into a different file and try to import them to see what would happen. Other than that, how do I begin to troubleshoot this problem? Are there known issues where records can be dropped from a fixed width file?
Thank you for your help!
cdun2
Hi,
I have a flat file that contains 2 types of records - Dev and production. The Dev will be noted with an D and the Production with a P. These records are different - The dev records are in a different order and contain different info then the Production. I need to use SSIS to import the data into 2 different SQL Tables. How to do this?
Can any one help me
Thanks in advance
I need to import an ASCII tab delimited file that has roughly 5,000 recordsonce a week into a SQL Server table. I have researched BCP and it seemslike the way to go. Am I headed in the right direction?Thanks in advance,James
View 3 Replies View RelatedHi,Currently, I am developing an application for my client. The issue is that the client has the office and warehouse which are in different locations. He wants the application run and updated all the data in to a database (called warehouse database). Every month, all records in warehouse database will be synchronized to another database which is identical with the warehouse database but it is run in his laptop at the office. Since networking is not an option, I have to create two identical database like this. Does any one know what is the good solution to this? Is there any synchronize feature in SQL Server 2005?Many thanks,
View 1 Replies View RelatedI get error reports in simple text files like the one below in relatively the same format. The only thing that varies is the number error reasons as there can be any number of error reasons for a file. Usually there is only one but there can be a handful. What is the best way to capture the error description and count of errors no matter how many there are? I want to take these items and update a table I have in sql server 2008r.
Report Message example:
************************************************** *****
Original File Name: some.file.YYYYMMDD.d.incr.02of02.1.dat
Source File ID: file02YYYYMMDD
File Receipt Date: 10/17/2014
Total records received: 1331136
Total records loaded: 1329987
ERROR REASONS
Error code: EBBW002 Error desc: Duplicate Record Total records: 1146
Error code: EABC001 Error desc: Invalid Length Record Total records: 1
Error code: ERRCM10 Error desc: Missing First Name Total records: 2
Total number of Errors encountered during the ODS update processing: 1149
************************************************** *****
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Hi, i have a table with all employee bio-data in a completed project. Iam now working on another project with a table that needs the same data and here iam talking about 300 records that rarely change. Instead of re-entering this data in this new table, i want to import the data from the completed project into a table in this new project. Does any one have any idea how to achieve that or is there a better option to do the same.
One more thing iam realising here is that iam going to use this same data in very many applications and some one from one department is going to enter this data in all these different applications. so i was wondering if there could be a way of having a central database that this guy can mantain and then i be able to use that table data in different applications that iam going to develop. I dont want to kill this unlucky guy with data entry tasks every time i deploy a new application.
So basically, how can make one database application sever several different applications with its data.
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am trying to import an xlsx spreadsheet into a sql 2008 r2 database using the SSMS Import Wizard. When pointed to the spreadsheet ("choose a data source")  the Import Wizard returns this error:
"The operation could not be completed" The Microsoft ACE.OLEDB.12.0 provider is not registered on the local machine (System.Data)
How can I address that issue? (e.g. Where is this provider and how do I install it?)
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
Hello:
I am not sure how to implement the following, but I believe it entails using DTS, and hopefully it is fine that I post it here b/c ultimately I will need this backend data for my frontend .aspx pages:
On a weekly basis, I need to IMPORT some data located on a remote Oracle DB into SQL Server 2k. Since there is so much data to transfer, I would only like to transfer the data that is new to the table since the last IMPORT, i.e. a week ago and leave behin the OLD data.
Is DTS the correct way to go or do I have more control via DTS with STORED PROCEDURES? Does anyone have any good references for me?
On a similar note, once this Oracle data is IMPORTED into a certain table, I would like to EXPORT some of these NEWLY acquired rows matching certain criteria into another table for auditing purposes. For this scenario, should I implement a TRIGGER UPDATE event here on the first table?
Any advice will be greatly appreciated!
Hi all,
when trying to Ãmport files to our database server from a client, I keep getting an error:
- Validating (Error)
Messages
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Source_txt" (1).
(SQL Server Import and Export Wizard)
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (175).
(SQL Server Import and Export Wizard)
... doing the same import when logged on the server, hasn't been giving me any errors, how come. I can from my client without trouble import tables from other DB servers but when ever it is files it won't do it.
I tried as mentioned in other threads rerun setup to re-install SSIS, but as it was already installed it wouldn't re-install. My next move would be to make a clean install, but not sure it would help, as I think this is a buck.
best regards
Musa Rusid
I have a situation where deleting old records is blocking updating latest records on highly transactional table and getting timeout errors from application.
In details, I have one table called Tran_table1 in OLTP database. This Tran_table1 is highly transactional table, it will receive data for insert/update continuously
While archiving 2 years old records from Tran_table1 into Tran_table1_archive in batches(using DELETE OUTPUT INTO clause), if there is any UPDATEs on Tran_table1,these updates are getting blocked and result is timeout errors in application.
Is there any SQL Server hints to avoid blocking ..
declare @table table (
ParentID INT,
ChildID INT,
Value float
)
INSERT INTO @table
SELECT 1,1,1.2
[code]....
This case ParentID - Child 1 ,1 & 2,2 and 3,3 records are called as parent where as null , 1 is child whoose parent is 1 similarly null,2 records are child whoose parent is 2 , .....
Now my requirement is to display parent records with value ascending and display next child records to the corresponding parent and parent records are sorted ascending
--Final output should be
PatentID ChildID VALUE
33 1.12
null3 56.7
null3 43.6
11 1.2
null1 4.8
null1 4.6
22 1.8
null1 1.4
HI,
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario:
--------------
I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
Thanks ,
Sunil
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot
I have a table with about half a million records, each representing a patient in my county.
Each record has a field (RRank) which basically sorts the patients as to how "unwell" they are according to a previously-applied algorithm. The most unwell patient has an RRank of 1, the next-most unwell has RRank=2 etc.
I have just deleted several hundred records (which relate to patients now deceased) from the table, thereby leaving gaps in the RRank sequence. I want to renumber the remaining recs to get rid of the gaps.
I can see what I want to accomplish by using ROW_NUMBER, thus:
SELECT ROW_NUMBER() Over (ORDER BY RRank) as RecNumber, RRank
FROM RPL
ORDER BY RRank
I see the numbers in the RecNumber column falling behind the RRank as I scan down the results
My question is: How to convert this into an UPDATE statement? I had hoped that I could do something like:
UPDATE RISC_PatientList_TEMP
SET RRank = ROW_NUMBER() Over (ORDER BY RRank);
but the system informs that window functions will only work on SELECT (which UPDATE isn't) or ORDER BY (which I can't legally add).
I need a little help here..I want to transfer ONLY new records AND update any modified recordsfrom Oracle into SQL Server using DTS. How should I go about it?a) how do I use global variable to get max date.Where and what DTS task should I use to complete the job? Data DrivenQuery? Transform data task? How ? can u give me samples. Perhaps youcan email me the Demo Package as well.b) so far, what I did was,- I have datemodified field in my Oracle table so that I can comparewith datelastrun of my DTS package to get new records- records in Oracle having datemodified >Max(datelastrun), and transferto SQL Server table.Now, I am stuck as to where should I proceed - how can I transfer theserecords?Hope u can give me some lights. Thank you in advance.
View 2 Replies View RelatedI have a query similar to the following. The intent of this query is to retrieve the top 6 records meeting the specified criteria (LOGTYPENAME = 'Process Status Start' OR LOGTYPENAME = 'Process Status End' ) based on most recent dates. Please keep in mind that I expect to return up to 6 records for each unique LogProcessName. This could be thousands of different LogProcessNames with up to 6 records for each.
1) The table I am executing against currently is very large in size and thus takes a long time to execute against. It would seem there must be a more efficient query to get the results I am looking for?
2) CTE doesn't work on SQL 2000. I need a query that does.
3) I cannot modify the database itself in the process.
;WITH cte AS (
SELECT [LogProcessName], [LogBody], [LogDate], [LogGUID], row_number()
OVER(PARTITION BY [LogProcessName]
ORDER BY [LogDate] DESC)
AS RN
FROM [LOGTABLE]
WHERE [LogTypeGUID] IN (
SELECT LogTypeGUID
FROM LOGTYPE
WHERE LogTypeName = 'Process Status Start'
OR LogTypeName = 'Process Status End' ) )
SELECT *
FROM cte
WHERE RN = 1 OR RN = 2 OR RN = 3 OR RN = 4 OR RN = 5 OR RN = 6
ORDER BY [LogProcessName] DESC, [LogDate] DESC
Does anybody else have any idea that would yield the results that I am looking for and take into account items 1-3 above?
Thanks in advance.
I tried to port 10000 records using DTS. After porting of 9900 records I got an error and comes out without any result. But I want to keep the records which has been ported till the error occured. Plz help me.
View 1 Replies View RelatedHi, I have had this problem for a while and have not been able solve it.
What im looking at doing is looping thru my patient table and trying to organise the patients in to there admission sequence, so when patient "A" comes in and is treated at my hospital and is discharged and admitted to another Hospital within one day then patient "A" will get a code of 1 being there first admission.
then if patient "A" is admitted again but there admission date is greater than one day they get a code of 2 being for there second admission but will need to loop thru table looking for other admissions and discharges.
The table name is Adm_disc_Match_tbl
Basically what i have 4 fields.
Index_key = which is the patient common link (text)
ur_episode = this wil change for each Hospital (text)
Admission_datetime = patient admission date and time (datetime)
Discharge_datetime = patient discharge date and time (datetime)
example of data
Code: ( text )
Index_key,ur_episode,Admission_datetime,discharge_ datetime
HERBERT-7/1929,513884-1686900,4/07/2006 10:58,17/07/2006 13:37
HERBERT-7/1929,C023092-1698859,17/07/2006 13:20,24/07/2006 0:30
ELSIE-5/1916,G148445-1720874,8/08/2006 11:00,30/08/2006 10:00
STANISLAWA-3/1918 ,G119981-1720045,8/08/2006 13:01,22/08/2006 12:13
FREDA-11/1925,183772-1998910,27/03/2007 9:53,3/04/2007 11:06
FREDA-11/1925,G147858-2007408,3/04/2007 10:49,26/04/2007 12:39
FREDA-11/1925,183772-2037727,28/04/2007 17:05,9/05/2007 11:41
FREDA-11/1925,G147858-2052082,9/05/2007 12:00,25/05/2007 11:17
If anyone could help it would be much appreciated.
Hi,
I have to search the records after the records populated.
I mean to say, i have displayed records in report, if i enter some strings in the textbox and clicked find, then it will highlight the particular records, instead of highlighting the values, is it possible to display only those particular records.
For example, say i have 50 records in a page,i entered some strings in the textbox and clicked find, then it will highlight the particular 5 records one by one which match the criteria i have entered in the texbox, instead of that i have to display only those 5 records.
Please tell me how to implement in this report,
Thanks and Regards
Altaf Nizamuddin
Ok, I'm really new at this, but I am looking for a way to automatically insert new records into tables. I have one primary table with a primary key id that is automatically generated on insert and 3 other tables that have foreign keys pointing to the primary key. Is there a way to automatically create new records in the foreign tables that will have the new id? Would this be a job for a trigger, stored procedure? I admit I haven't studied up on those yet--I am learning things as I need them. Thanks.
View 4 Replies View RelatedTable1 contains fields Groupid, UserName,Category, Dimension
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1)
and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
I am trying to write a query that will retrieve all students of a particular class and also any rows in HomeworkLogLine if they exist (but return null if there is no row). I thought this should be a relatively simple LEFT join but I've tried every possible combination of joins but it's not working.
SELECT
Student.StudentSurname + ', ' + Student.StudentForename AS Fullname,
HomeworkLogLine.HomeworkLogLineTimestamp,
HomeworkLog.HomeworkLogDescription,
ROW_NUMBER() OVER (PARTITION BY HomeworkLogLine.HomeworkLogLineStudentID ORDER BY
[Code] ...
It's only returning two rows (the students where they have a row in the HomeworkLogLine table).Â
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.