How To Work With Ssis...
Apr 3, 2007How Do I work on SSIS? Where to start...........???
View 7 RepliesHow Do I work on SSIS? Where to start...........???
View 7 RepliesHi all.,
I am new to SSIS,if it is a wrong place to post this, please forgive me.
How to work with SSIS., I need to use SSIS in my project., Please can any one tell a link to learn how to work with SSIS.,
I am looking forward for a link.,
We have just installed a new SQL 2005 Clustered server and loaded integration services. However it appears that integrations services may not work properly in a clustered environment.
So can integration services be setup on a clustered SQL 2005 server?
the book "microsoft sql server 2005 integration services" by kirk haselden claims you can download examples and source code at www.samspublishing.com
er no
what happens is this
go to the site
look for the 'downloads' link
see there isn't one
search for authors
h etc.... lose a few minutes of your life
find the book
yay
it forces you to sign up for an account in order to get the samples - outrageous
prepare for endless spam from sams
sign up
click on download samples
find the configedit folder
load into vs
run it
it doesn't work!!
thanks
Warning 1 The referenced component 'SourceLibrary' could not be found.
Warning 2 The referenced component 'SourceGrid2' could not be found.
Error 3 Unable to find source file 'K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigurationsEditorinDebugConfigurationsEditor.exe' for assembly 'ConfigurationsEditor.exe', located in '[TARGETDIR]' K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditSetupConfigEditSetupConfigEdit.vdproj SetupConfigEdit
Error 4 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 9 7 ConfigEdit
Error 5 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 10 7 ConfigEdit
Error 6 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 87 40 ConfigEdit
Error 7 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 11 15 ConfigEdit
Error 8 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 24 17 ConfigEdit
Error 9 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 25 11 ConfigEdit
Error 10 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.Designer.cs 318 17 ConfigEdit
Error 11 Metadata file 'K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlinDebugConfigEdit.dll' could not be found ConfigurationsEditor
Warning 12 Could not resolve this reference. Could not locate the assembly "SourceGrid2". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors. ConfigEdit
Warning 13 Could not resolve this reference. Could not locate the assembly "SourceLibrary". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors. ConfigEdit
one could argue that ssis should have a config editor supplied with it, instead of having to go into notepad
Can I install only [Bus....integ.. dev.... st..]. on my machine without SQL 2005? I have a sybase database management system.. can I work with SSIS?
Can it extract something from IBM DB2/DATACOM/LOTUS NOTES/VSAM/???
pl give me answers with justifications!!!!
Hi,
I am completely new to SSIS. Is there a way to get SSIS to work with a SQL server 2000 database. Is there a SQL 2000 Add in that can be utilized. Basically I want to save the SSIS package to the SQL 2000 database and schedule it to run.
Please let me know if you want any more details.
thanks in advance.
Hello,
I have configured Kerberos delegation for several web services. One of the web service calls SSIS packages, but the packages don't run with the expected impersonate user : the package starts with the imporsonate user, but continue with ASPNET user (which is not allowed to execute SSIS and connect to DB).
If the web service is called directly (no delegation), SSIS packages run with the correct user. It looks like than there is an autenthicate issue, but kerberos is configured and web services can run from one to another with the impersonate user. The issue occured only when I call SSIS packages.
Here is a extract of the SSIS log file :
Code Snippet <dtslog>
<record>
<event>PackageStart</event>
<message>Beginning of package execution.
</message>
<computer>WKS-GE-BRAZILIA</computer>
<operator>WKS-GE-BRAZILIAPascal.Brun</operator>
<source>ImportMonthlyCSV</source>
<sourceid>{D053CB99-FDE4-492D-83BC-821E1B34704B}</sourceid>
<executionid>{EA9C1929-4131-4FDD-A6FC-560E01A65536}</executionid>
<starttime>09.08.2007 17:31:02</starttime>
<endtime>09.08.2007 17:31:02</endtime>
<datacode>0</datacode>
<databytes>0x</databytes>
</record>
<record>
<event>OnError</event>
<message>SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Data Warehouse" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
</message>
<computer>WKS-GE-BRAZILIA</computer>
<operator>WKS-GE-BRAZILIAASPNET</operator>
<source>Import CSV</source>
<sourceid>{284D3166-F372-4B03-86C1-75A4D8DC9A5C}</sourceid>
<executionid>{EA9C1929-4131-4FDD-A6FC-560E01A65536}</executionid>
<starttime>09.08.2007 17:31:02</starttime>
<endtime>09.08.2007 17:31:02</endtime>
<datacode>-1071611876</datacode>
<databytes>0x</databytes>
</record>
...
Any help is required.
Thanks in advance.
I have a query that joins with different table using link server in the database. SSSI doesn€™t take the query. How to make the SSIS package query to use the link server in the data base ?
thanks
I would like to setup SSIS project so that multiple developers can work on same project. I am having issues with protectionlevel properties while another developer opens the package created by other developer.
Can anyone guide me on setting up project so that multiple developers could open the package and run (not simaltaneously though). Also tips on setting up source safe or team foundation will be appreciated!
Thanks
Mahesh
Hello All,
I am trying to run the below query in SSIS, However it does not work, but when I try to run the same query in Oracle client it works fine. Here is the following query:
select 'AAA-'||OWNER AS SOURCE,
table_name,
column_name,
SUBSTR(data_type,1,50) DATA_TYPE ,
SUBSTR(decode(data_type,'NUMBER', DATA_PRECISION, DATA_LENGTH),1,20) DATA_LENGTH
from all_tab_cols
where owner='XXX'
ORDER BY TABLE_NAME, COLUMN_ID
Here ARE the following errorS I get when running from SSIS:
[ORA_AAA_XXX [147]] Error: There was an error with output column "SOURCE" (612) on output "OLE DB Source Output" (157). The column status returned was: "The value could not be converted because of a potential loss of data.".
[ORA_AAA_XXX [147]] Error: The "output column "SOURCE" (612)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "SOURCE" (612)" specifies failure on error. An error occurred on the specified object of the specified component.
Any help?
Regards,
Raju
I€™m importing a Flat file (delimited text) into a sql server database table and trying to trap any import errors in another output Flat file.
I create a Flat File Source task. After tweaking the task, the Source €śError Output€? tab shows all the input columns and all €śError€? and €śTruncation€? values are set to €śRedirect row€?
Next I add a €śSQL Server Destination€? task and connect the Source green arrow to it.
Finally I add a Flat File Destination task (error Output task), connect the Source red arrow to it, click €śOK€? in the €śConfigure Error Output€?, and finally add a connection manager to the Error output task. When I look at the Mappings tab of the Error Output file it shows only three available input columns: €śFlat File Error Output Column€?, ErrorCode, and ErrorColumn
I€™m not sure where they came from but that info is not very useful to me. I want to know which line the error occurred on as well as the bad column(s). If nothing else, I need to see at least the actual row that was bad. How can I get that information?
Barkingdog
Dear all,
I've been searching the article for error handling in SSIS but seems no article have same problem exactly as mine. In my package there's container, it contains Data Flow task and some of Script tasks. I put an error precedence from Data Flow task into Script task that contains script for log an error that might be occured. The Data Flow task imports data from flat file into SQL Server 2005 and I've set a semicolon as the column delimiter. Unfortunately there is a data in flat file that had one column contain semicolon as its value.
This would trigger an error and I hope the error would be logged into a table as I wrote inside Script task. But it didn't work. The error precedence won't work, the package stop in flat file source instead. I've been trying the event handler but it didn't work either. Maybe I got wrong implementation, anybody can help me explain the error handler and solve the problem ?
Here is the capture of my package, since I didn't know how to attach the picture in this forum.
Thanks in advance.
Best regards,
Hery
I'm trying to figure out a solution for posting financial transactions against our Payflow Pro (Verisign) payment gateway (web service) using SSIS. The process I have in my mind goes like this...
1.) Select the appropriate records from our financial system DB.
2.) Iterate through each record and post the pertinent values against the payment gateway web service.
3.) Create log files for successful and failed transactions.
The log files would then be manually imported into our financial system.
Thanks in advance.
If in BIDS I set "work offline" on to change an SSIS package, the connections for source and destination had already been build. Can I move this package to another server and execute it without going into BIDS and changing the switch back?
View 7 Replies View RelatedI am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Thanks
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
When I use the following execute statement where I am "Hard Coding" in the parameters, the stored procedure runs successfully and it places the data into the table per the stored procedure.
SQLStatement: dbo.sp_ml_location_load @system_cd='03', @location_type_cd=Store;
However, the @system_cd parameter can change, so I wanted to set these parameters up as variables and use the parameter mapping in the Execute SQL Task.
I have set this up as follows and it runs the package successfully but it does not put the data into the table. The only thing I can figure is either I have the variables set up incorrectly or the parameter mapping set up incorrectly.
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
Here is my set up, what is wrong here:
I Created these Variables:
Name Scope Data Type Value
system_cd Locations String '03'
location_type_cd Locations String Store
I added these parameter mappings in the Execute SQL Task
Variable Name Direction Data TypeParameter NameParameter Size
User::system_cd Input NVARCHAR@system_cd -1
User::location_type_cd Input NVARCHAR@location_type_cd -1
I used this SQLStatement: EXEC dbo.sp_ml_location_load ?,
It runs the package successfully but it does not put the data into the table.
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using the following line command "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
Hi There,
I am trying to set a variable with this default value using expression. This works in tsql but doesn't in ssis. Can anybody tell me what is wrong with this?
dateadd("dd", -1, datediff("dd", 0, getdate()))
Thanks.
At one of my accounts I'm using SQL 2008r2 and SSIS in an DWH solution. Today I wanted to created a dynamic sql statement in one of the packages. The dynamic part is in the where-clause a sql query I use. I want to set the values for this clause dynamically. Therefor I created a user variable (named 'Filter') which should get it´s value at run-time.
/DTS "MSDBProdMy Package" /SERVER "My-Server" /CHECKPOINTING OFF /REPORTING EW /SET "Package.Variables[User::Filter].Properties[Expression]";" where [Starting Date] < '2008-09-01 00:00:00.000' "
However when I execute this package with dtexecui it doesn not use the value specified after the /SET parameter, but instead uses the value specifiied at design time. I get the same when I add the execution of ths pacakage as a sql server job step (type SSIS). I would expect that value specified after the /SET parameter would overwrite the valus specified at design time, but I don't see that happening.
I have designed a VB Script in ASP .NET (as that is what I'm used to using) that will look at a specific file at a specific path and send the Last Modified information to a database. Now I would like to move this script to the Script a Task function in SSIS so that I can check before running the rest of the package that the file I want to pull the data from has actually been updated. The ASP .NET code (which does work) is as follows (connection string removed):
<%@ Import Namespace="System.Data.OleDb" %>
<%
Dim objCONN As New OleDbConnection("REMOVED")
Dim objSQL As New OleDbCommand()
Dim strInsert As String
Dim objFilesSystem As Object
Dim objFile As Object
Dim strDate As String
objFilesSystem = CreateObject("Scripting.FileSystemObject")
objFile = objFilesSystem.GetFile("C:Flat_File_Data/Force_Receipt_To_Clear.xls")
strDate = objFile.DateLastModified
strInsert = "1, cast( '" & strDate & "' as datetime ) ) "
objCONN.Open()
objSQL.Connection = objCONN
objSQL.CommandText = "INSERT INTO CTS.dbo.IS_THERE_CHECK VALUES( getdate(), " & strInsert
objSQL.ExecuteScalar()
objCONN.Close()
%>
What follows is as close as I could get in SSIS (I had to set Option Strict to Off). It produces no error, at least not as far as I can tell, nor does it write to the database when run.
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim objCONN As New OleDb.OleDbConnection("REMOVED")
Dim objSQL As New OleDb.OleDbCommand()
Dim strInsert As String
Dim objFilesSystem As Object
Dim objFile As Object
Dim strDate As String
objFilesSystem = CreateObject("Scripting.FileSystemObject")
objFile = objFilesSystem.GetFile("C:Flat_File_Data/Force_Receipt_To_Clear.xls")
strDate = objFile.DateLastModified
strInsert = "1, cast( '" & strDate & "' as datetime ) ) "
objCONN.Open()
objSQL.Connection = objCONN
objSQL.CommandText = "INSERT INTO CTS.dbo.IS_THERE_CHECK VALUES( getdate(), " & strInsert
objSQL.ExecuteScalar()
objCONN.Close()
Dts.TaskResult = Dts.Results.Success
End Sub
My error is that 'Name tr is not declared' tr.Rollback() I tried moving the 'Dim tr As SqlTransaction' outside the try but then I get 'Variable tr is used before it si assinged a value'.
What is the correct way? Try conn.Open() Dim tr As SqlTransaction tr = conn.BeginTransaction() cmdInsert1.Transaction = tr cmdInsert1.ExecuteNonQuery() cmdInsert2.Transaction = tr cmdInsert2.ExecuteNonQuery() cmdInsert3.Transaction = tr cmdInsert3.ExecuteNonQuery() tr.Commit() Catch objException As SqlException tr.Rollback() Dim objError As SqlError For Each objError In objException.Errors Response.Write(objError.Message) Next Finally conn.Close() End Try
I have the below procedure that will not work- I must be losing my mind, this is not that difficult - mental roadblock for me.
Using SQL Server 2000 to create SP being called by ASP.Net with C# code behind
stored procedure only returns if input exactly matches L_Name
PROCEDURE newdawn.LinkNameLIKESearch @L_Name nvarchar(100)AS SELECT [L_Name], [L_ID], [C_ID], [L_Enabled], [L_Rank], [L_URL] FROM tblContractorLinkInfo WHERE L_Name LIKE @L_Name RETURN
I tried: WHERE L_Name LIKE ' % L_Name % ' no luck. What am I missing?
Thank you
SP below is not work.It gives null for @kaysay
I used parametric table name. Is this the problem?
My aim to calculate record count of a table
Thanks.
CREATE PROCEDURE Tablodaki_Kayit_Sayisi(@TABLO varchar(30))AS
Declare @kaysay bigintDeclare @SQLString nvarchar(100)Declare @Param nvarchar(100)
Set @SQLString = N'Select @kaysayOUT = count(BELGE) From ' + @TABLOSet @Param = N'@kaysayOUT bigint'
Execute sp_executesql@SQLString,@Param,@kaysayOUT = @kaysay
Select @kaysay
Return
GO
SELECT H.id, H.CategoryID ,H.Image ,H.StoryId ,H.Publish, H.PublishDate, H.Date ,H.Deleted ,SL.ListTitle,C.CategoryTitle
FROM HomePageImage H
JOIN shortlist SL on H.StoryId = SL.id
(INNER JOIN category C on H.CategoryId = C.CategoryId)
order by date DESC
Hello,
I am trying to query with my stored procedure. I am getting comma separated list as input parameter (which is VARCHAR) .
The table column, which I have to compare with input parameter value , is in INTEGER datatype.
So when , I compare Like as follows:-
" AND TABLE1.EMPID IN (@INPUTPARAMETERLIST)"
I am getting error. "Syntax error converting the varchar value '34,343' to a column of data type int."
Could anybody help me , to solve this ?
Thanks !
Nicol
I have a textbox and a checkbox on a form and I'd like to add both values to a db. The textbox value gets inserted fine but I'm having trouble with the checkbox. Any ideas would be greatly appreciated.
Thanks
Form1 is the column in my db.
SqlCommand myCmd = new SqlCommand();
myCmd.Parameters.Add("@ClientCode",SqlDbType.VarChar).Value = TextBox2.Text;
myCmd.CommandText = "UPDATE table SET Form1 = 'Yes' WHERE ClientCode = @ClientCode";
sqlConnection1.Open();
myCmd.Connection = sqlConnection1;
if( CheckBox1.Checked == true)
{
myCmd.ExecuteNonQuery();
}
sqlConnection1.Close();
Hi,
Beside working right from the server how else someone can perform the SQL admistration job, I guess my question is how do most SQL DBA perform their administration without going to the server directly. Anyone --- can help please??
Thanks in advance.
Declare @StartDate datetime
Declare @EndDate Datetime
Set @StartDate = dateadd(day, datediff(day, 0, getdate()), 0)
Set @EndDate = getdate()
The job runs at 11:30 pm so I want the start date to be the same but the time to be equal to 00:00:00.0 When I run the getdate does it also return a time stamp?
The Yak Village Idiot
I had a problem where some users were experiencing timeouts when trying to add a single record to a table with 2.3 million records.
It's not a very wide table; only 10 columns and the biggest column in varchar 500. The rest are guid, datetime, tinyint...
There is also an old VB app that inserts about 3000 records a day into this table during office hours while users occasionally try and insert a record into this table.
Something said to me that the problem could be indexes but I wasn't quite sure because I though indexes only have an impact on select, delete & update. And not particulary on insert. But I checked it out anyway and noticed that the 3 indexes (1 column PK, 1 column Clustered & 1 column non-clustered) weren't padded. So I changed that (Fill Factor 95) and the problem has gone away. But why? I thought the insert would just have appended it to the end of the index before I made this change? Why would that time out?
I have the following queries. The first returns the 'Unknown' row, the second works the way I would expect. Are my expectations wrong? Can someone describe for me what is going on?
Thanks
Code Snippet
select *
FROM
SynonymComFinancialCategory b
LEFT JOIN TT_FinancialCategory a
ON
a.FinanceGroup = b.FinanceGroup
AND a.FinanceCode = b.FinanceCode
AND a.Finance = b.Finance
AND b.Finance <> 'Unknown'
WHERE
a.FinanceGroup IS NULL
AND a.FinanceCode IS NULL
AND a.Finance IS NULL
Code Snippet
select *
FROM
SynonymComFinancialCategory b
LEFT JOIN TT_FinancialCategory a
ON
a.FinanceGroup = b.FinanceGroup
AND a.FinanceCode = b.FinanceCode
AND a.Finance = b.Finance
WHERE
a.FinanceGroup IS NULL
AND a.FinanceCode IS NULL
AND a.Finance IS NULL
AND b.Finance <> 'Unknown'
Hi,I have the following table with some sample values, I want to return the first non null value in that order. COALESCE does not seem to work for me, it does not return the 3rd record. I need to include this in my select statement. Any urgent help please.Mobile Business PrivateNULL 345 NULL4646 65464 65765NULL 564654654 564 6546I want the following as my results:Number3454646564654654Select COALESCE(Mobile,Business,Private) as Number from Table returns:3454646654654 (this is a test to see if private returns & it did with is not null but then how do i include in my select statement to show any one of the 3 fields)select mobile,business,private where private is not null returns:657655646546thanks
View 1 Replies View RelatedHello,I created a formview in a web page. The data are in a sql server express database.With this form, I can to create a new data, I delete it but I can't to modify the data.The app_data folder is ready to write data; the datakeynames element in formview web control declared. I replace the automated query created by VS 2005 by a strored procedure to see if the problem solved.The problem is the same with an update query or a update stored procedure...Have you an idea, please.Than you for your help.Regards.
View 1 Replies View RelatedIm working with a detailsview and when I try to edit something and then update, the changes are not saved.
I have 2 tables ("[etpi.admin].Ocorrencias" and "[etpi.admin].SMS") that store the data that Im trying to change. Since Im having problems with the name of tables, Im coding it manually, using SQL server management studio and VWD.
I believe my code can be wrong (Im new to vwd and C# world), so here it is:
UpdateCommand="UPDATE [etpi.admin].Ocorrencias SET [Status_Ocor] = @Status_Ocor, [Percentual] = @Percentual, [IDPriori] = @IDPriori, [Abertura] = @Abertura, [IDTecRes] = @IDTecRes, [Area] = @Area, [CodEquip] = @CodEquip, [Descricao] = @Descricao, [Destinatario] = @Destinatario, [Data_Implanta] = @Data_Implanta WHERE [etpi.admin].Ocorrencias.IDOcorre = @IDOcorre
UPDATE [etpi.admin].SMS SET [idSMS] = @idSMSWHERE [etpi.admin].SMS.IDOcorre = @IDOcorre">
<UpdateParameters><asp:Parameter Name="idSMS" Type="Int32" /><asp:Parameter Name="Status_Ocor" Type="String" /><asp:Parameter Name="Percentual" Type="Int32" /><asp:Parameter Name="IDPriori" Type="Int32" /><asp:Parameter Name="Abertura" Type="DateTime" /><asp:Parameter Name="IDTecRes" Type="Int32" /><asp:Parameter Name="Area" Type="String" /><asp:Parameter Name="CodEquip" Type="Int32" /><asp:Parameter Name="Descricao" Type="String" /><asp:Parameter Name="Destinatario" Type="String" /><asp:Parameter Name="Data_Implanta" Type="DateTime" /><asp:Parameter Name="IDOcorre" Type="Int32" /></UpdateParameters>
Thx.