Cannot use dynamic sql in current context. So need some help regarding this.
I am developing a stored procedure to update a table. Sending Column names as parameters, but not able to use them as given below.
INSERT INTO Books (@Column1, @Column2) values..
Any way to execute without using dynamic sql?..
Thanx.
I am unable to get FTS working where the column to be searched is type varchar(MAX) or Text. I can get this to work if my column to be indexed is some statically assigned array size such as varchar(1000).
For instance this works, and will return all applicable results.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](1000) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
And this does not. It returns zero results what so ever.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](MAX) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
Could someone please tell me what I need to do to enable FTS on varchar(MAX) or Text columns?
I encounter this particular error.
Exception Details: System.Data.SqlClient.SqlException: The data types varchar and text are incompatible in the equal to operator.
Line 21: Dim reader As SqlDataReader = command.ExecuteReader()
This is the first time I'm trying out with MS SQL so I'm abit lost. I hope my code is correct and I've did a little search. I did not set "Text" in my database, I use int and varchar. Here's the affected part of my code and the database. Dim password As String = ""
Dim querystring As String = "SELECT Password FROM Member WHERE Username = @username"
'Dim conn as SqlConnection
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("mainconnect").ConnectionString)
Dim command As New SqlCommand(querystring, conn)
command.Parameters.Add("@username", SqlDbType.Text)
command.Parameters("@username").Value = txtLogin.Text
conn.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
While reader.Read()
password = reader("Password").ToString()
End While
reader.Close()
End Using
My database:
User_ID int(4)
Username varchar(50)
Password varchar(255)
Email varchar(50)
Any ideas?
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedHi,
This is my complete trigger.
ALTER TRIGGER DeleteTriggerC_Middleware_Exception ON dbo.C_Middleware_Exception AFTER DELETE AS
BEGIN
DECLARE @RowCount AS VARCHAR
SET @RowCount = @@ROWCOUNT
DECLARE @TableName_Deleted AS VARCHAR(50)
DECLARE @ErrorMsg_Deleted AS VARCHAR(255)
DECLARE @AddlErrMsg_Deleted AS VARCHAR(255)
DECLARE @SubjectArea_Deleted AS VARCHAR(25)
DECLARE @CHKPT_Deleted AS VARCHAR(10)
SELECT @TableName_Deleted = table_name , @ErrorMsg_Deleted = cast(error_msg AS varchar(255)) , @AddlErrMsg_Deleted = cast(addl_error_msg AS varchar(255)),
@SubjectArea_Deleted = cast(SUBJECT_AREA AS varchar(25)), @CHKPT_Deleted = cast(CHKPT AS varchar(255))FROM DELETED
--where subject_area = 'inventory'
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE Table_Name = @TableName_Deleted
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area IS NULL and ChkPoint IS NULL
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @AddlErrMsg_Deleted like Addl_Error_Msg
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area = @SubjectArea_Deleted and ChkPoint = @CHKPT_Deleted
END
END
when i am executing the follwing query i am gettin systax error.
Query :delete from dbo.c_middleware_exception where subject_area = 'eap_room'
Error :
Server: Msg 245, Level 16, State 1, Procedure DeleteTriggerC_Middleware_Exception, Line 17
Syntax error converting the varchar value '*' to a column of data type int.
what could be the solution.
Thanks in advance
yvnsmca
I have an inventory database that Im trying to create a report out ofthe IP address are a lookup on a seperat table but I keep getting theabove error can I change the table row to something to fix this orwhat.SELECT i.INVENTORY_ITEM_ID AS [IP Address],i.HOST_NAME AS [ServerName], '' AS Flag, i.MEMO AS Comments, 'Seattle' AS City, 'Washington'AS State,CASE WHEN fv.value = 'EL EET1410' THEN '1111 3rdAve.' WHEN fv.value = 'EL WFL17' THEN '999 3rd Ave.' ELSE '' END AS[Address 1],' ' AS [Address 2], CASE WHEN fv.value = 'ELEET1410' THEN '1111' WHEN fv.value = 'EL WFL17' THEN '2222' ELSE ''END AS [Building ID],fv.VALUE AS Building, '98101' AS Zip,CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Computing FacilityLevel],CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Bldg Floor],CASE WHEN fv.value = 'EL EET1410' THEN 'C028'WHEN fv.value = 'EL WFL17' THEN 'C123' ELSE '' END AS WSPID,i.LOCATION_IN_FACILITY AS Location,i.SERIAL_NUMBER AS [Serial Number], i.ASSET_TAG AS [Asset Tag], ' ' AS[Second Asset Tag(s)],vv.VALUE AS Manufacture, mv.VALUE AS Model,'Yes' AS [Rack Mountable], rv.VALUE AS [Rack Units], 'DEV' AS [ServerEnviroment],lv.VALUE AS [Sever Type], ov.VALUE AS OS,CASE WHEN lv.value = 'Server - Intel Blade' THEN'Windows' WHEN lv.value = 'Server - Intel' THEN 'Windows' WHENlv.value = 'Server - Unix' THEN 'Unix'ELSE '' END AS [OS Type], '19x28' AS Footprint,ev.VALUE AS [Technical Owner of Server], 'N/A' AS [SLA Category],i.ON_BOARD_NIC_PORT_COUNT AS [NW Connectionquantity], 'Devlopment/Test Machine' AS [Application(s) Name],ev.VALUE AS [PW Contact],'N/A' AS RTO, 'N/A' AS RPO, 'No' AS [Is BoxClustered?], 'N/A' AS [Buisness Critical],CASE WHEN mv.value = 'Proliant DL580G1' THEN'90lbs' WHEN mv.value = 'Proliant DL360G2' THEN '85lbs' WHEN mv.value= 'Enterprise 220R' THEN'45lbs' ELSE '' END AS Weight,i.LAST_MODIFIED_DATE AS [Date of Last Install], 'No' AS [DedicatedCircuit]FROM dbo.INVENTORY_ITEM i LEFT OUTER JOINdbo.IP_TO_INVENTORY pv ON pv.IP_ADDRESS = i.INVENTORY_ITEM_IDLEFT OUTER JOINdbo.LOOKUP_VALUE lv ON lv.LOOKUP_VALUE_ID =i.DEVICE_TYPE_ID LEFT OUTER JOINdbo.LOOKUP_VALUE fv ON fv.LOOKUP_VALUE_ID =i.FACILITY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE vv ON vv.LOOKUP_VALUE_ID =i.VENDOR_ID LEFT OUTER JOINdbo.LOOKUP_VALUE mv ON mv.LOOKUP_VALUE_ID =i.MODEL_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ov ON ov.LOOKUP_VALUE_ID =i.SOFTWARE_VERSION_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ev ON ev.LOOKUP_VALUE_ID =i.CHECKED_OUT_BY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE rv ON rv.LOOKUP_VALUE_ID =i.U_HEIGHT_ID
View 2 Replies View RelatedSQL server 2000
Note : GRP_ID integer
declare @SchDnGRP VARCHAR(50)
SET @SchDnGRP='29,30'
SELECT USR_ID_ARY from AD_USR_GRP Where GRP_ID in(@SchDnGRP)
i got error like
Syntax error converting the varchar value '29,30' to a column of data type int.
if need any sql server Configuration requie, please advice to me
I have a table(tab1) with a column(col1) of type varchar. I insert a row with an integer value(1). And when i query the table using the sql, select col1 from tab1 where col1 = 1, it works fine.
But after i insert a varchar, say 'a' and then do the same query, i get an error message saying, "Syntax error converting the varchar value 'a' to a column of data type int.". Why is this so? Please reply.
Well I am doing a simple insert through a stored procedure..., but I am getting this error. In my table I have the UserID as a VARCHAR 100. I am storing from a textbox that will have number because its there email. But I am not converting anything. Do I need to convert in this scenario??
Server Error in '/pickem' Application.
Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int.Source Error:
Line 113:
Line 114: dbConnection.Open
Line 115: Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Line 116:
Line 117: Dim rowsAffected As Integer = 0
Here is the code: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(ConfigurationSettings.AppSettings("connString"))
Dim myCommand as New SqlCommand("prcAddTeam", dbConnection) myCommand.CommandType = CommandType.StoredProcedure
myCommand.Parameters.Add("@UserID", SqlDbType.Varchar, 100).Value = TRIM(emailBox.Text) myCommand.Parameters.Add("@TeamName", SqlDbType.Varchar, 40).Value = TRIM(teamBox.Text) myCommand.Parameters.Add("@Address1", SqlDbType.Varchar, 50).Value = TRIM(addressBox.Text) myCommand.Parameters.Add("@Address2", SqlDbType.Varchar, 50).Value = TRIM(address2Box.Text) myCommand.Parameters.Add("@City", SqlDbType.Varchar, 50).Value = TRIM(cityBox.Text) myCommand.Parameters.Add("@State", SqlDbType.Varchar, 30).Value = stateList1.SelectedItem.Value myCommand.Parameters.Add("@Zip", SqlDbType.Varchar, 11).Value = TRIM(zipBox.Text) myCommand.Parameters.Add("@FirstName", SqlDbType.Varchar, 50).Value = TRIM(firstNameBox.Text) myCommand.Parameters.Add("@LastName", SqlDbType.Varchar, 50).Value = TRIM(lastnameBox.Text)
dbConnection.Open Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Dim rowsAffected As Integer = 0
dbConnection.OpenStored procedure:CREATE PROCEDURE prcAddTeam @UserID VARCHAR(100) ,@TeamName VARCHAR(40) ,@Address1 VARCHAR(50) ,@Address2 VARCHAR(50) ,@City VARCHAR(50) ,@State VARCHAR(30) ,@Zip VARCHAR(11) ,@FirstName VARCHAR(50) ,@LastName VARCHAR(50) ASSET NOCOUNT ONDECLARE @ID INTSET @ID = 0SELECT @ID = ISNULL((SELECT UserID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN INSERT INTO tblUserInfo (UserID,TeamName,Address1,Address2,City,State,Zip,FirstName,LastName,CreateDate) VALUES(@UserID,@TeamName,@Address1,@Address2,@City,@State,@Zip,@FirstName,@LastName,GetDate()) SET @ID = @@IDENTITY END
this data. need help
Sort following numbers by asc and desc order
Before query sort
-1.1
-8.8
-15.5
0.0
+0.5
+0.2
Sort asc
+0.5
+0.2
0.0
-1.1
-8.8
Sort Desc
-8.8
-1.1
0.0
+0.2
+0.5
In a stored proc, can you declare a local variable that is an existing column in a table & then based on other criteria, do an order by using the local variable?
View 1 Replies View RelatedI'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
Hello Everyone,A have a Managed Stored Procedure ([Microsoft.SqlServer.SqlProcedure]). In it I would like to call a UserDefinedFunction:public static SqlInt32 IsGetSqlInt32Null(SqlDataReader dr, Int32 index) { if(dr.GetSqlValue(index) == null) return SqlInt32.Null; else return dr.GetSqlInt32(index) }I than allways get the following ErrorMessage:Column, parameter, or variable #1: Cannot find data type SqlDatareader.Is it not possibel to pass the SqlDatareader to a SqlFunction, do the reading there and return the result.My original Problem is, that datareader.GetSqlInt32(3) throws an error in case there is Null in the DB. I thought SqlInt32 would allow Null.Would appreciate any kind of help! Thanks
View 1 Replies View RelatedI need to update a large table, about 55 million rows, without filling the transaction log, in the shortest time as possible. The goal is to alter the table and change the data type for Text column from VARCHAR(7900) to NVARCHAR(MAX).
Since I cannot do it with an ALTER TABLE statement (it would fill up the transaction log) I'm thinking to:
- rename column Text in Text_OLD
- add Text column of type NVARCHAR(MAX)
- copy values in batches from Text_OLD to Text
The table is defined like:
create table DATATEXT(
rID INTEGER NOT NULL,
sID INTEGER NOT NULL,
pID INTEGER NOT NULL,
cID INTEGER NOT NULL,
err TINYINT NOT NULL,
[Code] ....
I've thought about a stored procedure doing this but how to copy values in batch from Text_OLD to Text.
The code I would start with (doing just this part) is the following, but maybe there are more efficient ways to do it, or at least there's a better way to select @startSeq in the WHILE loop (avoiding to select a bunch of 100000 sequences and later selecting the max).
declare @startSeq timestamp
declare @lastSeq timestamp
select @lastSeq = MAX(sequence) from [DATATEXT] where [Text] is null
select @startSeq = MIN(Sequence) FROM [DATATEXT] where [Text]is null
BEGIN TRANSACTION T1
WHILE @startSeq < @lastSeq
[Code] ....
Hi;I am trying to write a rountine ( below ) that will go into a colum oftext data type ( fae.pmcommnt ) locate the word "to" and replace it.I have the routine below. I get no error messages, but it also seemsto do nothing :).Any clues would be greatly appreciated.ThanksSteve================================================== =============declare @ptrP intSELECT @ptrP = PATINDEX('%to%', pmcommnt)from fae where projid ='00013'declare @ptrPC binary(16)select @ptrPC = TEXTPTR(pmcommnt)from faeif( TEXTVALID ('fae.pmcommnt', @ptrPC ) > 0 )print 'works'print @ptrPUPDATETEXT fae.pmcommnt @ptrPC @ptrP 2 'JJ'select projid, pmcommnt from fae
View 2 Replies View RelatedI got this error for a calculated field that calls a public function of a custom assembly based on the report parameter values. The return type is an array of double.
=code.ovalues.dGetValues(Parameters!Report_Start.Value, Parameters!Report_End.Value, Parameters!Tag.Value, Parameters!Agg.Value)
Does SSRS 2005 supports the type double for a field? Can the data source of a field in a dataset be an array? Is there a way to pass the array to a field by reference and display the values at runtime?
I would appreciate any help since I could not find anything helpful on the internet and Microsoft document!
Our shop recently upgraded to MS SQL 2005 server from the prior SQL 2000 product.
I receive and error during processing related to inserting a value into a field of datatype real. This worked for years under MS SQL 2000 and now this code throws an exception.
The exception states:
The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 15 ("@TEST"): The supplied value is not a valid instance of data type real. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision.
This error is caused by inserting several values that fall outside of a range that MS SQL 2005 documentation specifies.
The first value that fails is 6.61242e-039. SQL Server 2005 documentation seems to indicate that values for the datatype real must be - 3.40E + 38 to -1.18E - 38, 0 and 1.18E - 38 to 3.40E + 38.
Why doesn't 6.61242e-039 just default to 0 like it used to?
I saw an article that might apply, even though I just use a C++ float type and use some ATL templates.
Is my question related to this post?http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=201636&SiteID=1
[rsInvalidExpressionDataType] The Value expression used in image €˜image1€™ returned a data type that is not valid.
[rsInvalidDatabaseImage] The Value expression for the image €˜image1€™ did not evaluate to an image.
Hi How should i solve this problem
Regards
KAren
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error:
[OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
I have a DB named zCIFRecord with a column named CIFUpdateDate which is of datatype varchar. The data is a date MM/DD/YYYY 01/30/2008, this is al that is in this column. I can search this colum for individual dates and for a range of dates. My problem is with a range of dates that is not within the same year, such as;
SELECT [CIFPan]
,[CIFMemNum]
,[CIFLName]
,[CIFFName]
FROM [FutureSoft].[dbo].[zCIFRecord]
WHERE [CIFUpdateDate] between '12/01/2007' and '01/30/2008'
will return nothing because it seems to only search on the 12 then the 01 then the 2008. this search can be performed properly on dates within the same year such as;
SELECT [CIFPan]
,[CIFMemNum]
,[CIFLName]
,[CIFFName]
FROM [FutureSoft].[dbo].[zCIFRecord]
WHERE [CIFUpdateDate] between '01/01/2008' and '01/30/2008'
will return the proper values because now all the numbers are in correct order. How can i create a search that lets me perform the first query as well as the second query. I tried to convert to a float but you cant convert a varchar to a float.
Dear All,
I inserted a record in table on DB created on SQLServer 2005 and found out that the one of the column values is shown as '??????' instead of showing the encrypted value that I sent with the insert statement.3
............................ Can anyone tell me how to get rid of this?
Thanks and regards,
Z Z.
create table tblxmldata
(id int, xmltext varchar(max))
insert into tblxmldata values(1,'<associatedText><value type="PO">GTT taken</value></associatedText>')
insert into tblxmldata values(1,'<associatedText><value type="PO">Check sugar today please</value></associatedText>')
I want the output as
GTT taken
Check sugar today
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedI have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
Can i still get the sum of a field even if the data type is of type varchar?
thanks!
Funnyfrog
One purchased app stored user's multiple lines input into a varchar column in which including char(13) and char(10).
My app need to select this value and format to multiple lines text in one text box.
How to code to output it?
Impact on performance of changing Text column size.
However, many of them were regarding older releases of SQL Server.
Does the architecture in 2012, 2014 releases make this less of an issue ?
In other words, why bother going from Varchar(1000) to Varchar(50) ?
I'm just thinking maybe there is column compression automatically now.
When I change a column from text to varchar using thedesign view of a table within Enterprise Manager thevarchar value (less than 8000 characters) appears in thecolumn but does SQL Server automatically delete the textvalues from their pages?If not are they removed by routine reindex/defrag orshould I create a new table, import from the text asvarchar and drop the old table to make sure the pagesstoring the original text version of the values aredeleted?..
View 1 Replies View RelatedHi all,
I am developing ASP.NET 1.1 application using VB.NET & SQL Server, on my machine I am using SQL Server 2000, and everything is working just fine.
The problem appears when I uploaded the site to the Host, they are using SQL Server 2005, is there any reason for this, I am using casting in the code, and I am sure there is something wrong with the hosting settings.
Any suggestions.
Best Regards
Wafi Mohtaseb
Hello Friends
How are you?? Friends i am getting problem in SQL Server 2005. I am deployng web application on production server as well as Databse also. In production server i inserted new field in all tables which is rowguid and its type is uniqueidentifier. The default binding for this field is newsequentialid(). In some pages it works ok but in some places it generates error like 'Conversion from type 'DBNull' to type 'String' is not valid'. Can anybody help me to solve this problem. Its urgent so plz reply me as soon as possible. I'll be very thankfull to you. Thanks in Advance.
Regards,
I am parsing a documnet and i am grabbing that document into a variable of datatype varchar. The document contains more than 8k(upto 30k characters) characters. So how can I handle this situation.How can I get that document into my local varchar variable.
thanks.
I need to extract specific text elements from a varchar column. There are three keywords in any given string: "wfTask," "wfStatus" and "displayReportFromWorkflow." "wfTask" and "wfStatus" can appear multiple times, but always as a pair and will each be followed by by "==" (with or without surrounding spaces). "displayReportFromWorkflow" is always followed by "(" and there can be spaces on either side. The text elements will be between a pair of double quotes, and following one of keywords. For each row, I need to return the task, status and report name.
declare @t table (rowID int, textValue varchar(1024))
insert @t
(rowID, textValue)
values
[Code] ....
Output:
rowID, Task, Status, ReportName
----- --------- ------- ------------------------
1, Issuance, Issued, General Permit
2, Issuance, Issued, Capacity Letter Type III
2, Review, Denied, Capacity Letter Type III
I started with a string splitter using the double quote character, referencing elements "i" and "i+1" where the text like '%wfTask%' or '%wfStatus%' or '%displayReportFromWorkflow%', but the case of multiple task/status in a row has confounded me so far.
Unfortunately, CLR is not an option.
can anyone see as to why I would get this error with the following SP?
ALTER PROCEDURE [dbo].[SP]
@ID int = 0,
@emailFrom VARCHAR(50) = Null,
@emailDate VARCHAR(50) = Null,
@emailSubj VARCHAR(50) = Null,
@emailTxtBody VARCHAR(1000) = Null,
@emailHtmlBody VARCHAR(1000) = Null
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @Notes VARCHAR (8000)
DECLARE @TicketID INT
DECLARE @emailBody VARCHAR (1000)
DECLARE @Length Int
SET @Notes = ''
SET @Length = LEN(@emailSubj)
-- insert a new entry
INSERT INTO PopEmail
( emailFrom, emailDate, emailSubj, emailTxtBody, emailHtmlBody )
VALUES
( @emailFrom, @emailDate, @emailSubj, @emailTxtBody, @emailHtmlBody )
-- get the new ID
SET @ID = @@identity
If ( @ID <> 0 ) AND ( ISNUMERIC(@emailSubj) = 1 )
Begin
IF @emailTxtBody IS NULL
BEGIN
Set @emailBody = @emailHtmlBody
PRINT '@emailHtmlBody: ' + @emailBody
END
ELSE
BEGIN
SET @emailBody = @emailTxtBody
PRINT '@emailTxtBody: ' + @emailBody
END
SET @TicketID = CAST( @emailSubj AS int )
SET @Notes = @emailFrom + ', ' + @emailDate + ', ' + @emailBody
Select @ID = ID From TicketDetails Where TicketDetails.TicketID = @TicketID
Exec differentSP @ID, @TicketID, @Notes
PRINT 'Subject: [' + @emailSubj + ']'
print 'length: ' + CAST(@Length as varchar (10))
Print 'emailSubj: ' + CAST( @emailSubj AS int )
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
PRINT 'TicketID: ' + Cast( @TicketID AS Varchar ( 10 ) )
PRINT 'Notes: ' + @Notes
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
END
ELSE
BEGIN
Print 'ID: ' + CAST(@ID AS VarChar(10))
PRINT 'ISNUMERIC: ' + CAST(ISNUMERIC(@emailSubj) AS VarChar (10))
PRINT 'Subject: [' + @emailSubj + ']'
END