Our production DBs are SQL Server 2000(Enterprise Edition) on Windows2003.
Can anybody tell me how can I check whether a table has a FullText Index or not?
Thank you!
I am using SSIS to replace set of tables daily. One of the table has primary, unique, foreign keys and full-text index. Before truncating, I am dropping the foreign key constraints (to truncate the parent table), truncating the tables and recreating the foreign keys.
I have few questions:
1) Do I need to drop and recreate the unique key as well? (I am not dropping the primary key) - Unique key is identity column created just for the full-text indexing since it was mentioned that key on integer is better than key on varchar and my pk is a varchar.
2) Do I need to drop and recreate the full-text index or just rebuild/repopulate it every time the table is loaded.
This is the first time i am using full text index and I was able to learn a lot about it from the sites. I would like to understand the correct approach while loading the tables.
Hi All,
I am using SQL SERVER 2005 Express. I am trying to set up CREATE FULLTEXT INDEX.
I have confirmed that the Fulltext is installed with:
SELECT
fulltextserviceproperty('IsFulltextInstalled')
So no I need to create a Full Text index:
CREATE FULLTEXT INDEX
ON E190MELCDL(xmldata)
KEY INDEX PK_E190MELCDL
But I get this error:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
Any Ideas?
Thanks,
Bones
I've got fresh Installed SQLExpress 2005 Adv. with a following:
WinXP Pro, Developer PC, Admin/Full rights, Antivirus PC-Cilin was switched off for the installation.Enable User Instance - 0 (clear check box during installation)SQL Collation: Dictionary order case sensetive for1252 Char setSELECT @@language: us_englishcreate fulltext catalog testAPFullTextcatalog,
Sp_help_FullText_catalogs: 5 testAPFullTextcatalog C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData estAPFullTextcatalog 0 0create unique index indexName_Comment on dbo.FullTextSearchTestTable(RecordID)
sp_configure:
allow updates 0 1 0 0
clr enabled 0 1 0 0
cross db ownership chaining 0 1 0 0
default language 0 9999 0 0
max text repl size (B) 0 2147483647 65536 65536
nested triggers 0 1 1 1
remote access 0 1 1 1
remote admin connections 0 1 0 0
remote login timeout (s) 0 2147483647 20 20
remote proc trans 0 1 0 0
remote query timeout (s) 0 2147483647 600 600
server trigger recursion 0 1 1 1
show advanced options 0 1 0 0
user instances enabled 0 1 0 0
user options 0 32767 0 0CREATE FULLTEXT INDEX ON dbo.FullTextSearchTestTable(Comment)
KEY INDEX indexName_Comment ON testAPFullTextcatalog
WITH CHANGE_TRACKING AUTO
Result:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1Default full-text index language is not a language supported by full-text search.
I couldn't overcome the issue. Please help.
Alexei
P.S. May be Important: During installation (on Management Studio Express installation stage) a had to click twice the "Ignore" button for the following popUp message:
"Could not write value to key:
SoftwareClasses.xdropenWithProgIdsShared - verify, if you have sufficient access to hot key or contact your support.
I'm about ready to smash my computer. I've installed SQL Server 2005 Express Edition with Advanced Services on Win XP Pro SP2. I made sure to enable the Fulltext service at install. Installed to the default instance name, and made sure the fulltext service is running from the CM. I made sure to enable full text indexing on my database from the properties window. I can create the fulltext catalog, but not the index!
----
create fulltext index on [person.contact] (Lastname)
key index [PK_Person.Contact] on myfulltextcatalog
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
----------------------------------------------
select * from sys.fulltext_catalogs
returns the catalog
----------------------------------------------
sp_fulltext_service 'update_languages'
Informational: No full-text supported languages found.
----------------------------------------------
select @@language
us_english
----------------------------------------------
select * from sys.fulltext_languages
Returns an empty table
----------------------------------------------
SELECT * FROM sys.configurations
ORDER BY name ;
1126 default full-text language 1033 0 2147483647 1033 default full-text language 1 1
----------------------------------------------
Does anyone have any idea what's going on? I've already removed and re-installed a couple of times to different directories, used different instance names, and still no luck. Any help would be greatly appreciated.
Mike
Hello all,I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :SELECT ci.itemNameFROM Content_Items ciINNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemIdINNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :A unique column must be defined on this table/view.How do I create a unique column within a view?Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
View 1 Replies View RelatedHello,
i have a database with about 300.000 entries. The database gets about 30 new entries every day. The Database has an FulltextIndex on several columns. This FulltextIndex will be updated every night.
But now i have found out, that the fulltextsearch doesn't work anymore for all entries that where added after April 2006.
When i for example make following sql-statementSELECT id,date FROM MyTable WHERE (CONTAINS((columnA),' "mykeyword" '))
i only get results that have a date after April 2006 (although there are matching entries after that date).
What can the reason for that be?
According to Management Studio the last Update of the FulltextCatalog has been made on 1st of December 2007. Everything looks normal and I didn't find any logs that are saying that there has been any errors.
Where do I have to look to be sure if the FullTextIndex does work?
Specs:
SQL Server 2005
Microsoft SQL Server Management Studio 9.00.1399.00Microsoft Analysis Services-Clienttools 2005.090.1399.00Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)Microsoft MSXML 2.6 3.0 6.0 Microsoft Internet Explorer 6.0.3790.3959Microsoft .NET Framework 2.0.50727.832Operating System 5.2.3790
greetings
Klaus
SQL Server 2005:
Anyone know how best to rewrite this SQL string to perform a weighted search on my table?
here's my code:
SQL="SELECT RecipeName FROM recipeList WHERE FREETEXT(*,'ISABOUT " & ing01 & " WEIGHT (.1) or " & ing02 & " WEIGHT (.2) or " & ing03 & " WEIGHT (.3) or " & ing04 & " WEIGHT (.4) or " & ing05 & " WEIGHT (.5)')"
the idea is to get a list of recipes most pertinant to the ingredients entered.
table 'recipeList' contains the ingredients in several columns. so column 2 might say '5oz of flour', column 2 - '2oz butter' etc.
at the moment it returns the correct recipes but not in the right order.
If I use 'CONTAINS' it returns nothing.
hope that's not too vague!
Hello all,
I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :
SELECT ci.itemName
FROM Content_Items ci
INNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemId
INNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]
However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.
So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.
It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :
A unique column must be defined on this table/view.
How do I create a unique column within a view?
Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
I just tried to backup a database I recently deployed to to SQL Server 2005 box, and got the following error:
The backup of full-text catalog 'myCatalog' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online.
Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
I don't need the index so I tried to drop it with both:
DROP fulltext catalog 'myCatalog'
and
DROP catalog 'myCatalog'
but both give me a syntax error.
How can I get rid of this index so I can backup my database?
Thanks,
Tristan
We are designing a scenario in which we will have a central publisher and several subscribers in a server to server environment using Merge replication. We also will have a fulltext index for one of the tables being replicated and synchronized. What are your recommendations for the index? Would auto change tracking reduce the impact? We are building for a possible 1 billion row table but do not anticipate more than 100K rows at any time of replication.
Thanks,
Sally
Hello all,
I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :
SELECT ci.itemName
FROM Content_Items ci
INNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemId
INNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]
However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.
So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.
It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :
A unique column must be defined on this table/view.
How do I create a unique column within a view?
Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
I am running a DB with 250Gb of documents, the fulltext index just keeps growing and growing. The files in the MssearchCatalogDir folder is currently taking up 106Gb, it was only 74Gb this morning. The full text catalog size property says its only 53.6Gb and this is remaining steady while the files in the MssearchCatalogDir folder seem to be balloning out of control. I ran a reorg on the fulltext catalog and it did not alter the file space (actually increased it).
There is one *.ci file that is doing most of the growing, its about three times as big as the second biggest one and is expanding before my eyes.
Should I have turned population off when I did the reorg?
Manamgement studio has an Optimize catalog option on the fulltext catalog properties dialog, is this different from a fulltext catalog reorg? Should I run this.
Should I run a shrink file on the filegroup containing the fulltext catalog (the filegroup itself is very small, all the space is in the MssearchCatalogDir folder)?
I have 140Gb left on this drive, is it just going to keep on expanding until I'm out of room, I just dont know what I should do.
Abit more info.....
I was rebuilding the index from scratch (needed to move it to another filegroup).
When I first started the rebuild, msftesql.exe and msftefd.exe were both taking alot of cpu and the overall cpu usage was high. Now after 12 hours, only msftesql.exe is running and is taking up 5-10% cpu. Could it be that the rebuild is not complete yet? Although the Item Count property of the full text catalog does seem to indicate that all documents have been processed, the processes keeps running and disk space keeps going down.
Hi,
I have a problem restoring a Read-Only filegroup in a database.
I've restored the Read/Write filegroups first without any problem.
Then, I am able to recover Read-Only filegroups which do not contain fulltext indexes with the command :
RESTORE DATABASE GSM FILEGROUP = 'FG_RO_20080214' WITH RECOVERY
However, for filegroups containing FullText indexes (Fulltext indexes are in the same filegroup as data used for this index), I always get the following error :
Server: Msg 3149, Level 16, State 6, Line 1
The file or filegroup "sysft_CAT_SM_20080127" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
Server: Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
If I'm looking at sys.database_files catalog view, I can see the following
name type_desc state_desc
------------------------ ----------- -----------------
sysft_CAT_MS_20080127 FULLTEXT RECOVERY_PENDING
Does anyone have an idea, please.
Thanks in advance
Patrick
For demonstration I created a fulltext index on table employee in Northwind database.
The following query gives an error:
SELECT * FROM employees
WHERE CONTAINS (FirstName, 'Barbe')
Replacing 'Barbe' by 'Barb' or other words it works fine.
The error message is (I have a french version of SQL installed, here the translation: "A clause in the query contains only ignored words"
Une clause de la requête ne contient que des mots ignorés)
Language for wordbreak in fulltext index is French and the error happens only with French, with English it works.
Is this a Microsoft bug?
How can i enable my fulltex change-tracking and update-index in my table?
I recreated my fulltext catalog and start the full population, but although my fulltext index status shows active, my full-text change-tracking and the update index were disabled. - and I don't know how to enable them.
Thanks in advance
Are there anyway I can check my last database reorg date and time using Tsql ?
View 5 Replies View RelatedWe have a table that is Full Text Search index enabled on one column.This table has 200 lakhs of rows(20000000) . ContainsTable() function is searching data with in these 200 lakhs of rows(20000000), if any new rows are inserted then the ContainsTable is not going to search in these recent inserted rows.
We observed when we try for a data to search. it is returning the rows till the rows that are inserted date is less than 30th of march 2012. but not searching in the records that are created after April month , if even the data we are searching is available .
TableFulltextItemCount is around 2.2 crores.
Then we done rebuilt the FT catalog Index. then the TableFulltextItemCount became 0.Again we run the containstable query ,but still it is not getting results.
As the no of rows are very more . so i am not able to show the actual rows from which the data is not coming.
the below query gives 2 results that are from actual base table
HTML Code:
select * from g_case_action_log where cas_details like '%235355%' and product_id = 38810
To search for the same above word using FTS,I have used the query as below
HTML Code:
SELECT Distinct top 50 cal.case_id,cal.cas_details From g_case_action_log cal (READUNCOMMITTED)inner join containstable(es.g_case_action_log, cas_details, ' ("235355" OR "<br>235355" OR "235355<br> ") ') as key_tbl on cal.log_id = key_tbl.[key] Where cal.product_id = 38810 ORDER By cal.case_id DESC
I have attached one sql script file for your ref that contains create logic and index schema properties
Why it is not returning results all the time.
Hello..
When I used Microsoft SQL Server 2005 Management Studio Express to Create FULL TEXT INDEX by this code:
CREATE FULLTEXT INDEX ON txtfilestbl(txtfile) KEY INDEX PK_txtfilestbl ON ForumsArchiveLibCtlg WITH CHANGE_TRACKING AUTO
It returns this ERR MSG:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
I Use same this code to create FULL TEXT INDEX by using Microsoft SQL Server 2005 Management Studio, and it was working properly.
What I have to do?
hello everybody,
i have one problem, I want to check the database table modified or not for every five minutes , how can check? please help me
Senthil
Check the field existence of a database table, if exist get the type, size, decimal ..etc attributes
I need SP
SP
(
@Tablename varchar(30),
@Fieldname varchar(30),
@existance char(1) OUTPUT,
@field_type varchar(30) OUTPUT,
@field_size int OUTPUT,
@field_decimal int OUTPUT
)
as
/* Below check the existance of a @Fieldname in given @Tablename */
/* And set the OUTPUT variables */
Thanks
Hello, everyone:
I want to check how many users are using a special database and table. How to do that? Thanks.
ZYT
hi,
I want to know through applicaiton how to check whether the Server named"Myserver" is Exists with Database named "MyDatabase" with Tables named ('Table1','Table2','Table3').
For any Database like (MS Access, Oracle, MS SQL-Server,MySQL)..
Please help me.....
thank's in advance.......
Paresh Patel.
Paresh.onmail@hotmail.com
CREATE TABLE PRODUCT_SALES
(
Salesmanid BIGINT,
Productid BIGINT
)
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,1)
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,2)
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,3)
SELECT * FROM PRODUCT_SALES
/* SalesmanID is reference key from Sales Master and ProductID is reference key from Product Master. How should i restrict user through DB with any constraint check, if user tries to enter
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,2),
It should throw error , if possible user defined message would be more useful.
I'm wondering if there is some sql I can run to check properties on a table. This would be used to verify things like data types, allow nulls and default values have been set to avoid mistakes. This could be done manually one table and one column at a time, but it would be a lot easier to look at it in the results window.
View 5 Replies View RelatedHi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??
Thanks
I have a table that contains words that will be used to search another table where FullText index has been created on searchable columns. I'm basically trying to run something like this:
SELECT t1.col1, t2.col3
FROM tbl1 t1, tbl2 t2
WHERE CONTAINS (t1.col1, t2.col1)
I know this won't work but is there a way to join these two tables so the words (t2.col1) can be passed as search conditions? There is no common key on both tables so normal join won't work. I'm trying to find a way to pass the search words from one table to another.
Can I dynamically (from a stored procedure) generatea create table script of all tables in a given database (with defaults etc)a create view script of all viewsa create function script of all functionsa create index script of all indexes.(The result will be 4 scripts)Arno de Jong,The Netherlands.
View 1 Replies View Relatedcan sql server do this ?
table 1 that check table 2 and adding missing dates
this my employee table
table 1
table Employee on work
------------------------
empid basedate shift
----------------------------
12345678 01/04/2007 1
12345678 02/04/2007 1
12345678 03/04/2007 1
12345678 04/04/2007 1
12345678 05/04/2007 1
12345678 06/04/2007 1
12345678 07/04/2007 1
12345678 08/04/2007 1
12345678 09/04/2007 1
12345678 10/04/2007 1
98765432 20/04/2007 1
98765432 21/04/2007 3
98765432 22/04/2007 3
98765432 23/04/2007 5
98765432 25/04/2007 4
98765432 26/04/2007 4
98765432 27/04/2007 4
98765432 28/04/2007 4
98765432 30/04/2007 4
-----------------------------------------------------------------------------------
and i need to see the missing dates lkie this
in table 2
------------------------------------------------------
table 2 (adding missing dates with zero 0)
table Employee_all_month
------------------------
empid basedate shift
----------------------------
12345678 01/04/2007 1
12345678 02/04/2007 1
12345678 03/04/2007 1
12345678 04/04/2007 1
12345678 05/04/2007 1
12345678 06/04/2007 1
12345678 07/04/2007 1
12345678 08/04/2007 1
12345678 09/04/2007 1
12345678 10/04/2007 1
12345678 11/04/2007 0
12345678 12/04/2007 0
12345678 13/04/2007 0
12345678 14/04/2007 0
12345678 15/04/2007 0
12345678 16/04/2007 0
12345678 17/04/2007 0
12345678 18/04/2007 0
12345678 19/04/2007 0
12345678 20/04/2007 0
.................................and adding missing dates with zero 0 until the end of the month
.................................
12345678 31/04/2007 0
98765432 01/04/2007 0
98765432 02/04/2007 0
98765432 03/04/2007 0
98765432 04/04/2007 0
98765432 05/04/2007 0
98765432 06/04/2007 0
98765432 07/04/2007 0
98765432 08/04/2007 0
98765432 09/04/2007 0
..............................and adding missing dates with zero 0 only whre no dates in this month
.......................
98765432 20/04/2007 1
98765432 21/04/2007 3
98765432 22/04/2007 3
98765432 23/04/2007 5
98765432 25/04/2007 4
98765432 26/04/2007 4
98765432 27/04/2007 4
98765432 28/04/2007 4
98765432 30/04/2007 4
TNX
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedWe have been using Sql Server 2005 Compact Edition 3.1 RDA synchronization method successfully on Sql Server 2000 database. Recently we moved the database to Sql Server 2005, sync doesn't work anymore, it just hangs on one table. On further investigation, we found out that it's the index on that table that causes this. We removed the index, it works fine. We are wondering the root cause, removing the index is not a solution for us. Any thoughts?. Thanks.
View 1 Replies View Relatedplease explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance