Hi!
I have a table looking like
(username) (account number) (start date) (end date) (product)
wich I can have up to 4 lines for the same client.
I wist to transfert those lines into a new table looking like
(username) (account number) (start date 1) (end date 1) (product 1)
(start date 2) (end date 2) ... (product 4)
How (in SQL) I could do it?
hai,
i have the data like this
Id [name] value
------------------------------
1 sam abc
1 sam def
1 sam ghi
2 john abc
2 john def
for a unique Id all the fields are same except the value.Now I want to join them and the data should appear like below.
Id [name] value
------------------------------------
1 sam abc,def,ghi
2 john abc,def
please help me regarding the query.
thanks
from,
pavansagar
Dear friends,
I have a problem that need some help from expert.Is there any way I could combine many rows into a row in Access using Visual Basic. I want to change the below table from TABLE A to TABLE B
TABLE A
SampleCode
Test Name
Result
ID
Name
Sex
9300105
Peripheral Blood Film
....
a few poikilocytes are present.
S7585512E
DHANDAPANI MAHESH
M
9300105
Peripheral Blood Film
....
No blast cells seen.
S7585512E
DHANDAPANI MAHESH
M
9300105
Peripheral Blood Film
....
microcytes, elongated cells and
S7585512E
DHANDAPANI MAHESH
M
9300105
Peripheral Blood Film
....
hypochromic but normocytic: . Some
S7585512E
DHANDAPANI MAHESH
M
9300105
Peripheral Blood Film
....
Majority of rbcs appear slightly
S7585512E
DHANDAPANI MAHESH
M
Output:
TABLE B
SampleCode
Test Name
Result
ID
Name
Sex
9300105
Peripheral Blood Film
....
a few poikilocytes are present, No blast cells seen.microcytes, elongated cells and hypochromic but normocytic. Some Majority of rbcs appear slightly
S7585512E
DHANDAPANI MAHESH
M
Your help would be greatly appreciated
Thanks a lot,
Chicky
Chicky
Hello,
I have a delima, and im not really sure if this possible. But i have a table like lets say
id | data1
1 this
2 that
3 stuff
i want to be able to return this as one row with the data from data1 in one column seperated by commas.
so the result would be
1 Column
this, that, stuff
can anyone help me with this.
Thank you,
~ Moe
I am writing a database system which recieves information parsed from various data formats. These data formats may or may not be complete, and as such some rows in the database can have gaps.
The input formats may contain reference to the same row (in this case the same Company record) but hold different facts about that company.
Eg one message may have name, phone and fax, whereas another message may contain name, address and website.
I need to be able to insert new companies into the database OR update current records with extended data as relevant, ive been looking for UPSERT or MERGE queries in SQL Server but i cant find any useful resources explaining its use.
Alternativly i'd like to be able to condense potential duplicates into single rows, eg:
NamePhoneEmailnullNamePhonenullWebsite
which would combine into one row where the null values get set by values derived from other similar rows:
Name PhoneEmailWebsite
Any help at all would be really appreciated
Thanks,
Toby
In Sql Server 2005 Express I have this table:CREATE TABLE [dbo].[Sections](
[SectionID] [int] NOT NULL,
[DocumentNo] [smallint] NULL,
[SequenceNo] [smallint] NULL,
[SectionNo] [smallint] NULL,
[DocumentTypeID] [smallint] NULL,
[SectionText] [ntext] NULL)
Each paragraph of text (SectionText) is in its own row
(SectionNo) Each primary document has a DocumentTypeID of 1 with
three subdocument types (2=Index, 3=Background, 4=Report).I run this query and return a collection of single rows from various documents grouped together by DocumentNo: SELECT *
FROM Sections
WHERE CONTAINS (SectionText, 'exercise')
ORDER BY DocumentNo
For each row that contains the search term, I would like to
return the full document (all rows as parapraphs within one row of
returned data). In other words, I want to reconstitute the full
document as it existed prior to being inserted into the database with
paragraph separation. For exampe, if the search term is in row 3
of DocumentNo=5, DocumentTypeID=2, I want to return all the rows of
that document in one block of text that retains paragraph format
(preferablly with a line break and carriage return between
paragraphs). How can this be done?
How can I get the results of this query>>
SELECT
RoleName = pr.name
,RoleType = pr.type_desc
,PermissionType = pe.state_desc
,Permission = pe.permission_name
,ObjectName = s.name + '.' + o.name
[Code] .....
WHICH RESULTS IN THIS>>
RoleNameRoleTypePermissionType PermissionObjectNameObjectType
publicDATABASE_ROLEGRANTDELETEdbo.AgencyUSER_TABLE
publicDATABASE_ROLEGRANTINSERTdbo.AgencyUSER_TABLE
publicDATABASE_ROLEGRANTSELECTdbo.AgencyUSER_TABLE
[Code] ....
I am running a query to pull data from 2 tables. However multiple data elements could be attached to one unique ID which when I run the query it repeats causing the entire data set to give inaccurate numbers. How to achieve this:
xxx.001A3264
xxx.001A3685
xxx.002A3261
xxx.002A3685
I would like my results to look like this:
xxx.001A3264 & A3685
xxx.002A3261 & A3685
IS there a way to combine all matching rows in a table so that itoutputs as one row, for example:tblMyStuffUniqueID int IDENTITYParentID intSomeSuch nvarchar(50)SomeSuch2 nvarchar(50)Table data:UniqueID ParentID SomeSuch SomeSuch21 1 Dog Bark2 1 Cat Meow3 3 Cow Moo4 3 Horse Whinnie5 5 Pig OinkDesired query result from Query:SELECT ??? as myText from tblMyStuff WHERE ParentID = 3myText = Cow Moo, Horse WhinnieHelp is appreciated,lq
View 2 Replies View RelatedI have one table list this
declare @test table(Id int, Description varchar(500))
insert into @test
values (1, '<b>Name :</b> XUZ <br/><br/>'),
(1, '<b>Type : </b> QWE <br /><br/>'),
(2, '<b>Name : </b> ABC <br /><br/>'),
(2, '<b>Type : </b> FGH <br /><br/>')
My expected result is
1, '<b>Name :</b> XUZ <br/><br/> <b>Type : </b> QWE <br /><br/>'
2, '<b>Name : </b> ABC <br /><br/> <b>Type : </b> FGH <br /><br/>'
As you can see its combine two rows of data group by id. Issue is If I use for xml path('') then its replace my html tags <b> to like <b> so after that then I again i need to replace all these symbols. Is it possible to get expected result without using xml path or if we use xml path then still my html tag leave as it is.
With the below query iam able to retrieve all the tables invloved in a stored proc. But, what I want to display the table names as comma separated list for each table.
;WITH stored_procedures AS (
SELECT o.id,
o.name AS proc_name, oo.name AS table_name,
ROW_NUMBER() OVER(partition by o.name,oo.name ORDER BY o.name,oo.name) AS row
FROM sysdepends d
INNER JOIN sysobjects o ON o.id=d.id
INNER JOIN sysobjects oo ON oo.id=d.depid
WHERE o.xtype = 'P')
SELECT id,proc_name, table_name FROM stored_procedures
WHERE row = 1
ORDER BY proc_name,table_name
Hello:
I have the following table. There are eight section IDs in all. I want to return a single row for each product with the various section results that I have information on.
productID SectionID statusID
10 1 0
10 2 1
10 3 2
10 4 1
10 5 3
10 6 1
11 1 0
11 2 1
11 3 2
11 7 3
11 8 3
Need to return two rows with the respective values for each section.
productID section1 section2 section3 section4 section5 section6 section7 section8
10 0 1 2 1 3 1
11 0 1 2 3 3
Any information or if you can point me in the right direction would be appreciated.
Thanks
Hi,I'm working on a system migration and I need to combine data from multiplerows (with the same ID) into one comma separated string. This is how thedata is at the moment:Company_ID Material0x00C00000000053B86 Lead0x00C00000000053B86 Sulphur0x00C00000000053B86 ConcreteI need it in the following format:Company_ID Material0x00C00000000053B86 Lead, Sulphur, ConcreteThere is no definite number of materials per Company.I have read the part ofhttp://www.sommarskog.se/arrays-in-sql.html#iterative that talks about 'TheIterative Method' but my knowledge of SQL is very limited and I don't knowhow to use this code to get what I need.Can anyone help me?
View 7 Replies View RelatedHi everyone,I really appreciate if anyone could help me with this tricky problemthat I'm having. I'm looking for a sample script to combine data inmultiple rows into one row. I'm using sqlserver. This is how data isstored in the table.ID Color111 Blue111 Yellow111 Pink111 GreenThis is the result that I would like to have.ID Color111 Blue, Yellow, Pink, GreenThere is no definite number of colors per ID. I have to use ID togroup these colors into one row. Therefore, ID becomes a unique keyin the table.Appreciate your help and time. Thank you in advance
View 1 Replies View RelatedI have the table below and like to combine the rows to create a single link row in a new column. The rows should be combined based on the job number columns which is the same for the rows to be combined.
DECLARE @M31
( M31_SQL_ID INT
,JOB_NUMBER INT
,LINE_NUMBER INT
,WORKS_DESC VARCHAR)
[Code] ...
Output should be as below
219242
16/7/15 called tenant and she thought we would just fix for free - advised her I can get a quote how ever she may have to pay - she will call back
219245
16/7/15 called tnt said no report number. Said she will speak with her husband and call back with her decision and 16/07/15 the work order was sent to agent ...
I'm trying not to use a temp table, but i may have to do so..
I'm using sql2005 for this case.
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something. If I've aliased it as 'results', is there a way to alias results again as something else? or maybe a trick with CTEs? I will try that! It seems promising.
How to combine multiple rows to single rows for the below sql query.
SELECT dbo.AccessLog.RCDID, dbo.AccessLog.EMPLOYEEID, dbo.AccessLog.LOGDATE, LEFT(dbo.AccessLog.LOGTIME, 5) AS LOGTIME,
dbo.AccessLog.INOUT
FROM dbo.AccessLog LEFT OUTER JOIN
dbo.LogType ON dbo.AccessLog.INOUT = dbo.LogType.INOUT LEFT OUTER JOIN
dbo.viwEmployee ON dbo.AccessLog.EMPLOYEEID = dbo.viwEmployee.Employee_ID
WHERE dbo.AccessLog.EMPLOYEEID='10763' AND (dbo.AccessLog.LOGDATE BETWEEN '01/04/2015' AND '01/04/2015')
ORDER BY dbo.AccessLog.EMPLOYEEID
The reult for the above query is:
RCDID | EmployeeID | LOGDATE | LOGTIME | INOUT
1 10763 01/04/2015 08:00 0
1 10763 01/04/2015 19:46 1
I need the result like the below
RCDID | EmployeeID | LOGDATE | IN | OUT
1 10763 01/04/2015 08:00 19:46
I'm trying not to use a temp table, but i may have to do so..
i have a derived table that makes the following results:
ID Status Name
2 1 "A"
2 2 "B"
I want to get the following:
ID Name1 Name2
2 "A" "B"
but like I said before, I can't repeat the query that gets the first 2 rows, as it's pretty invovled. a temp table is the best route I see right now, but I just wanted to be sure I'm not missing something.
Table:
CREATE TABLE [dbo].[KPI](
[SVP] [varchar](20) NULL,
[Wk1] [int] NULL,
[Wk2] [int] NULL,
[Wk3] [int] NULL,
[Wk4] [int] NULL,
[Wk5] [int] NULL,
[Y] [int] NULL,
[Q] [int] NULL,
[Wk] [int] NULL
)
To generate sample data:
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 1,0,0,0,0,2014,1,1)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,2,0,0,0,2014,1,2)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,0,3,0,0,2014,1,3)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,0,0,4,0,2014,1,4)
insert into KPI (SVP, Wk1, Wk2, Wk3, Wk4, Wk5, Y, Q, Wk) Values ('SVP', 0,0,0,0,0,2014,1,5)
[Code] ....
Current result:
SVPWk1Wk2Wk3Wk4Wk5YQWk
SVP10000201411
SVP02000201412
SVP00300201413
SVP00040201414
[Code] ....
Expected result:
SVPWk1Wk2Wk3Wk4Wk5YQ
SVP1234020141
SVP30 1 2 6 9 20142
SVP103226820143
SVP17233141120144
I surely can loop each row and insert the needed value into the result, I want to know if there is a better way to generate the result.
Hellow Folks.
Here is the Original Data in my single SQL 2005 Table:
Department: Sells:
1 Meat
1 Rice
1 Orange
2 Orange
2 Apple
3 Pears
The Data I would like read separated by Semi-colon:
Department: Sells:
1 Meat;Rice;Orange
2 Orange;Apple
3 Pears
I would like to read my data via SP or VStudio 2005 Page . Any help will be appreciated. Thanks..
I can use the IN with the WHERE clause as example:SELECT * FROM NORTHWIND WHERE LASTNAME IN ('FULLER','KING')I want to use the IN and LIKE at the same time:SELECT * FROM NORTHWIND WHERE LASTNAME LIKE ('A%','B%')I know this is a simplistic example, but the members for the IN will bemany, 5 to 10.I'm trying to avoid:SELECT * FROM NORTHWIND WHERE LASTNAME LIKE 'A%' OR LASTNAME LIKE 'B%'OR LASTNAME LIKE 'FU%' OR LASTNAME LIKE 'JON%' <...>and so forth.Any Ideas?TIARob
View 3 Replies View RelatedHai All,
Could some one help me how to combine IN & LIKE in the query selection,
i'v try many syntac and i just have no find the way out
this is what I would like to write:
Select DSCRIPTN,ORMSTRID,ACTINDX
from T50001
where ACTINDX = 350
and DSCRIPTN Like in '%'+(select distinct rtrim(ORMSTRID) ORMSTRID from L10001)+'%'
Hi all,
I have a table with multiple rows with the same ID.
a) How do I combine all columns into one row with the same ID?
b) Is this better to do the combine in the store procedure/trigger or a sub that involked by some sort of datarepeater, datagrid controls?
Since I am trying to brush up my sql. I appreciate any examples on top of conceptual solution.
Thanks
Combine 3 Databases, Not tables.
Let me spell this out -- I have 3 databases (they are in isolation when in use, its a field app) that need to be merged into 1 "masterDB" database. I've discovered I can use something like this to get to each DB in a query...
1 USE [database1]2 SELECT table1.Name, table1.Location, table1.Date, table2.Blog3 FROM table2 INNER JOIN4 table1 ON table2.ID = table1.ID5 ORDER BY table1.Date
and then just repeat for database2 and database3. Ok, fine, rah rah. My question is how do I "merge" all of these into 1. No data on each db will be identical, at all, ever so that is not a concern. I just need all the data from db1, 2 and 3 into masterDB.
Ideas? Direction?
Hello, I have these variables on my page:
userid = "10101"
RequestHost = "example.com"
What would be the best way performace wise to first check if the userid 10101 exists in my sql server db. If it does exist I would then need to check if "example.com" exists for the userid in the userdomains table. If these both exist I would then like to query some additional data. I was hoping its possible to combine this into one query somehow. I dont think this is the best solution:
sqlcommand.CommandText = "SELECT UserId From Users Where UserID = '10101'"
Conn.Open()
dr = sqlcommand.ExecuteReader
if dr.hasrows then
sqlcommand2.CommandText = "SELECT UserDomain From UserDomains Where UserID = 'example.com'"
dr2 = sqlcommand2.ExecuteReader
if dr2.hasrows then
sqlcommand3.CommandText = 'Select Additional Data
dr3 = sqlcommand3.ExecuteReader
'read values
conn.close
else
conn.close
'do something
end if
else
conn.close
'do something
end if Thanks Very Much!
I have an stored procedure that returns 3 columns. Month, Date, and Total Number of Calls.
Here is the stored Proc:
SELECT DATEPART(mm, CALLSTARTTIME) , DATEPART(dd, CALLSTARTTIME), COUNT(*)
FROM CALL_LOG_MASTER
WHERE (COMMERCIALS = '1') AND (PINCODE IS NOT NULL)
GROUP BY DATEPART(mm, CALLSTARTTIME), DATEPART(dd, CALLSTARTTIME)
ORDER BY DATEPART(mm, CALLSTARTTIME), DATEPART(dd, CALLSTARTTIME)
It returns a table:
MONTH DATE TOTAL NUMBER OF CALLS======= ===== ===========1 1 10
1 2 15
My question is: is it possible to combine the Month and Date column into one column. e.g.
Date Total Number of Calls==== ==============1/1 101/2 15
Please Help, Thanks in advance :)
I am looking for the correct T-sql statement. I want to put parameters in a SP from a select statement. And make the SP exec for each records that the select statement returns. The following is the SP that I want to pass the parameters.
CREATE PROCEDURE sp_sendSMTPmail (@To varchar(8000),
@Subject varchar(255),
@Body text = null,
@Importance int = 1, -- 0=low, 1=normal, 2=high
@Cc varchar(8000) = null,
@Bcc varchar(8000) = null,
@Attachments varchar(8000) = null, -- delimeter is ;
@HTMLFormat int = 0,
@From varchar(255) = null)
/* Name: sp_sendSMTPmail
Purpose: Send an SMTP mail using CDONTS object.
Requirements: SMTP server (comes with IIS but doesn't require IIS) must be loaded.
Returns: 0 if successful, 1 if any errors
Sample Usage:
sp_sendSMTPmail 'vince.iacoboni@db.com', 'Testing', 'testing sp_sendSMTPmail, please reply if you receive this',
@cc='irmsqlmail@db.com',
@Importance=1,
@Attachments='c:oot.ini;c:autoexec.bat'
History:
02/07/2001 VRI Created.
*/
AS
SET NOCOUNT ON
DECLARE @object int,
@hr int,
@StrEnd int,
@Attachment varchar(255),
@return int,
@Msg varchar(255)
SELECT @From = isnull(@From, @@SERVERNAME)
-- Create the CDONTS NewMail object.
EXEC @hr = sp_OACreate 'CDONTS.NewMail', @object OUT
IF @hr <> 0 GOTO ObjectError
-- Add the optional properties if they are specified
IF @Body IS NOT NULL
BEGIN
EXEC @hr = sp_OASetProperty @object, 'Body', @Body
IF @hr <> 0 GOTO ObjectError
END
IF @Cc IS NOT NULL
BEGIN
EXEC @hr = sp_OASetProperty @object, 'Cc', @Cc
IF @hr <> 0 GOTO ObjectError
END
IF @Bcc IS NOT NULL
BEGIN
EXEC @hr = sp_OASetProperty @object, 'Bcc', @Bcc
IF @hr <> 0 GOTO ObjectError
END
IF @HTMLFormat <> 0
BEGIN
EXEC @hr = sp_OASetProperty @object, 'MailFormat', 0
IF @hr <> 0 GOTO ObjectError
END
-- Loop through the ; delimited files to attach
CREATE TABLE #FileExists (FileExists int, FileIsDir int, ParentDirExists int)
WHILE isnull(len(@Attachments),0) > 0
BEGIN
SELECT @StrEnd = CASE charindex(';', @Attachments)
WHEN 0 THEN len(@Attachments)
ELSE charindex(';', @Attachments) - 1
END
SELECT @Attachment = substring(@Attachments, 1, @StrEnd)
SELECT @Attachments = substring(@Attachments, @StrEnd+2, len(@Attachments))
-- Ensure we can find the file we want to send.
DELETE #FileExists
INSERT #FileExists
EXEC master..xp_fileexist @Attachment
IF NOT EXISTS (SELECT * FROM #FileExists WHERE FileExists = 1)
BEGIN
RAISERROR ('File %s does not exist. Message not sent.', 16, 1, @Attachment)
RETURN 1
END
EXEC @hr = sp_OAMethod @object, 'AttachFile', NULL, @Attachment
IF @hr <> 0 GOTO ObjectError
SELECT @Msg = 'File ' + @Attachment + ' attached.'
PRINT @Msg
END
-- Call the Send method with parms for standard properties
EXEC @hr = sp_OAMethod @object, 'Send', NULL, @From, @To, @Subject, @Importance=@Importance
IF @hr <> 0 GOTO ObjectError
-- Destroy the NewMail object.
EXEC @hr = sp_OADestroy @object
IF @hr <> 0 GOTO ObjectError
PRINT 'Message sent.'
RETURN 0
ObjectError:
BEGIN
EXEC sp_displayoaerrorinfo @object, @hr
RETURN 1
END
GO
I have two tables in MS SQL 2000 that I need to combine into one. they will share 3 columns and the rest will stay the same. the existing tables are very large and I REALLY don't want to plug in all the data by hand...Any nifty tricks??? I found software but dont want to spend $$ on it.
View 5 Replies View RelatedHere is my dilemma, i'm trying to combine the results of two different tables. Both tables are very similar but the data returned must be sorted before they are combined because I'm only returning the top xx records based on a hits column.
Here is a sample of the two databases:
Table 1
ID - SONG - HITS
1 - tb1SONG 1 - 356
2 - tb1SONG 2 - 1459
3 - tb1SONG 3 - 278
4 - tb1SONG 4 - 965
5 - tb1SONG 5 - 124
Table 2
ID - tb2SONG - HITS
1 - tb2SONG 1 - 412
2 - tb2SONG 2 - 85
3 - tb2SONG 3 - 2035
4 - tb2SONG 4 - 693
5 - tb2SONG 5 - 745
I have tried the following union query which combines the two RS's then sorts the data:
SELECT Top 2 ID, Song, Hits FROM Table1
UNION SELECT Top 2 ID, Song, Hits from Table2
Which would return the first two records from each then sort them like this:
2 - tb1SONG 2 - 1459
1 - tb2SONG 1 - 412
1 - tb1SONG 1 - 356
2 - tb2SONG 2 - 85
I would like to sort based on the hits column then combine the RS producing this:
3 - tb2SONG 3 - 2035
2 - tb1SONG 2 - 1459
4 - tb1SONG 4 - 965
5 - tb2SONG 5 - 745
Any ideas or solutions will be greatly appreciated.
Thanks
I have two fields that I would like to combine into 1 field is this possible.
Example: Document # 555, Doc Description ABCD in the 3 field I would like 555-ABCD.
Is that possible in SQL Server thanks
SELECT bms_id,email_address,COUNT(*)
INTO #temp
FROM emp_db
WHERE email_address IS NOT NULL
GROUP BY bms_id,email_address
ORDER BY bms_id DESC,COUNT(*) DESC
SELECT bms_id COUNT(*)
FROM #TEMP
GROUP BY bms_id
ORDER BY COUNT(*) DESC
How can i put these two statements into a single sql statement.
Thanks.
I need to combine to sql queries. Separately they work fine, but I need the "total qty" from second query put into the first query
Query 1
SELECT dbo.Job.CompanyJobId, dbo.Job.Name, dbo.Region.CompanyRegionID, dbo.Job.Active,
dbo.Job.ChangeDate
FROM dbo.Job
LEFT OUTER JOIN dbo.Division ON dbo.Job.DivisionGuid = dbo.Division.DivisionGuid
LEFT OUTER JOIN dbo.Region ON dbo.Job.RegionGuid = dbo.Region.RegionGuid
LEFT OUTER JOIN dbo.JobType ON dbo.Job.JobTypeGuid = dbo.JobType.JobTypeGuid
WHERE dbo.job.CompanyJobId = 3505048
ORDER BY dbo.Job.CompanyJobId
Query 2
SELECT case dbo.SourceType.CompanySourceTypeId
when 'PR' then SUM(dbo.ProductionEvent.Quantity)
end
AS Ttl_Qty
FROM dbo.Batch INNER JOIN
dbo.Event ON dbo.Batch.BatchGuid = dbo.Event.BatchGuid INNER JOIN
dbo.Job ON dbo.Event.JobGuid = dbo.Job.JobGuid INNER JOIN
dbo.ProductionEvent ON dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid INNER JOIN
dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid INNER JOIN
dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid INNER JOIN
dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid LEFT OUTER JOIN
dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid left outer join
dbo.JobNoteEvent on Event.EventGuid = dbo.JobNoteEvent.EventGuid
WHERE dbo.Job.CompanyJobId = 3505048 and dbo.SourceType.CompanySourceTypeId = 'PR'
GROUP BY dbo.SourceType.CompanySourceTypeId
I have tried this but it doe not work:
SELECT dbo.Job.CompanyJobId, dbo.Job.Name, dbo.Region.CompanyRegionID, dbo.Job.Active,
dbo.Job.ChangeDate, Ttl_Qty
FROM dbo.Job
LEFT OUTER JOIN dbo.Division ON dbo.Job.DivisionGuid = dbo.Division.DivisionGuid
LEFT OUTER JOIN dbo.Region ON dbo.Job.RegionGuid = dbo.Region.RegionGuid
LEFT OUTER JOIN dbo.JobType ON dbo.Job.JobTypeGuid = dbo.JobType.JobTypeGuid
WHERE dbo.job.CompanyJobId = 3505048 and where Ttl_Qty =
(SELECT case dbo.SourceType.CompanySourceTypeId
when 'PR' then SUM(dbo.ProductionEvent.Quantity)
end
AS Ttl_Qty
FROM dbo.Batch INNER JOIN
dbo.Event ON dbo.Batch.BatchGuid = dbo.Event.BatchGuid INNER JOIN
dbo.Job ON dbo.Event.JobGuid = dbo.Job.JobGuid INNER JOIN
dbo.ProductionEvent ON dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid INNER JOIN
dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid INNER JOIN
dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid INNER JOIN
dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid LEFT OUTER JOIN
dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid left outer join
dbo.JobNoteEvent on Event.EventGuid = dbo.JobNoteEvent.EventGuid
WHERE dbo.Job.CompanyJobId = 3505048 and dbo.SourceType.CompanySourceTypeId = 'PR'
GROUP BY dbo.SourceType.CompanySourceTypeId)
ORDER BY dbo.Job.CompanyJobId
I have data as below:
IDJourneySegmentType Depart Arrive 1st2nd
1234511A UK AUS UKNULL
1234512A AUS US NULLUS
How can i make it to 1 row for 1st and 2nd column?
ID1st2nd
12345UKUS