I have SQL Server Express installed on my local development machine
and on a remote server. I have identical databases set up on each and I'm trying to keep them co-ordinated to make testing easier.
How can I copy the data from one to the other?
How can I copy the data
from one to SQL Server 2005? And can I create an Access database from
SQL Server Express?
Diane
I have SQL Server Express installed on my local development machine and on a remote server. I have identical databases set up on each. How can I copy the data from one to the other? How can I copy the data from one to SQL Server 2005? And can I create an Access database from SQL Server Express? Diane
View 3 Replies View RelatedI have tried the upsize wizard from access 2000 and access 2003 and get records transfer in 90% of the tables I have data stored an 89 meg MS access database (2003) on an XP machine. I can use, compact and copy etc in MS Access without problem.
With the upsize, I get No errors, just does not reliably move ALL data. I have run it multiple times and occasionally get some data in these tables, but never all data in a few tables and inconsistent.
========================================
So I have written code to copy the data from the access database and move it field by field into an Upsized database that was structure only, no data.
I have ONLY one Identity field (autonumber in MS access) that is the Key Relationship number to all other tables.
1 questions and one "bug" report need solutions to both.
Question: How can I copy the value from the MS access autonumber field to the identity field. (Some of the autonumber rows have been deleted so not always sequentiall) (I can do this moving data in code between to MS access databases that have autonumber fields)
=========================
I tied an elaborate write around to addNEW and then read the data in the newly created row. Reading the Identity field, I look up that number in the MS access database. Then I copy the ACCESS data to the Newly created table row in SQL Exress and update.
It works fine for about 30 record updates, then the Identify field stops giving me the correct sequence for the Identity field value. Makes it impossible to make sure all of my Access rows get copied. Tried transactions but not supported with the ADODB configuration, but doubt that would help.
Example data returned in the SQL Express recordset, when I read the Identify field back I get
1,2,3 etc 31, 33, 32 (out of sequence) then it (my code) can't figure out the out of sequence and end up with the next identity value at 41.
The only info I found was that it could be a cursorlocation problem, what do you recommend?
?Is there a way in code to change the identity field to string, then copy the data and change back to identity field again?
Hi all
I am using Windows XP Prof, SP2 and having Sql Server 2000, SP4 and SQL Server 2005 Express Edition with Advanced Services SP1, and SQL Server 2005 Express Edition Toolkit SP1 installed. The toolkit is the one which created me the DTS folder in the root with this applicattion:
C:Program FilesMicrosoft SQL Server90DTSBinnDTSWizard.exe
I start now this Wizard and choose from Sql server - which is my 2000 version and to my sql express version, id/pw or windows authentication. I receive then the message:
Cannot continue for the following reason:
1) You have chosen a server that does not contain any packages.
2) The server you have chosen is neither a sql server 2000 nor sql server 7
The SSIS Migration Wizard can only load packages from those servers.
Nice. I am having Sql server 2000 and want to go to 2005.
What I am doing from ? Do I need to create some packages on Sql server 2000 to be able to proceed this task ?
Regards
Chrs
Hi all,
I have read/studied (i) Working with Databases in Visual Web Developer 2005 Express in http://quickstarts.asp.net/QuickStartv20/aspnet/doc/data/vwd.aspx, (ii) Xcopy Deployment (SQL Server Express) in http://msdn2.microsoft.com/en-us/library/ms165716.aspx, (iii) User Instances for Non-Administrators in http://msdn2.microsoft.com/en-us/library/ms143684.aspx, and (iv) Embedding SQL Server Server Express in Applications in http://msdn2.microsoft.com/en-us/library/ms165660.aspx. I do not understand the concepts and procedures to do Xcopy and User Instances for non-administrators completely-I do not know how to connect to databases and create database diagrams or schemas using the Database Explorer. I have a stand-alone Windows XP Pro PC. I have created a ChemDatabase with 3 dbo tables in the SQL Server Management Studio of my SQL Server Express and a website of my VWD Express application with an App_Data folder. I am not able to proceed to use Xcopy and user instance to bring the 3 dbo tables of ChemDatabase to my App_Data folder. Please help and give me some detailed procedures/instructions to bring the 3 dbo tables of ChemDatabase (or ChemDatabase itself) from the SQL Server Management Studio Express to the App_Data folder of the website of my VWD Express project?
Thanks in advance,
Scott Chang
Can I copy a database (structure, keys, relationships, data) that I create in SQL Express to a regular SQL Server database? If so, whats the best way to do it?
View 1 Replies View RelatedI created a web application (ASP.Net with a SQL DB backend) using Visual Studio 2005 Standard Edition and the bundled SQL Server Express.Everything works perfectly on my local machine.Now I need to upload the application and DB to my hosting provider. My hosting provider suggested I backup the db, upload it with FTP, and they would restore it for me on the production server.However, I can find no option to "Backup" a DB in SQL Server Express or in Visual Studio. Am I missing something?Using Visual Studio 2005 Standard Edition and SQL Server Express, how does Microsoft envision us copying our DB's into production?Thanks a lot,Chris
View 2 Replies View RelatedI found a nice demo of using AJAX here
http://weblogs.asp.net/scottgu/archive/2005/12/26/433997.aspx
and want to use some of the code in my own website. But it uses a SQL DB and tables.
So without recreating thme manually what is the way to get these tables in MY DB?
I am working with someone in a different state. He is using SQL Express, I am using SQL standard. He has created a large DB that i need a copy of on my machine.
Is there a way for him to make a copy of his DB so it can be placed on our FTP site for me to download?
Thanks
I am developing an application that uses SQL Server Express. Everything is running great, except that I can't figure out how to copy a DataBase from my server at work onto my laptop so that I may test it at home...
How can I copy the DataBase from my Server at work to my laptop? I'm on the network at work, I just can't figure out how to copy it...
Please help! :)
Thanks,
Jacob
How does one generate Transact-SQL for table structure in SQL server express 2005?
I have very limited access to an SQL server database (using rudimentary web based interface) for my hosted website. I am ready to deploy an application that was developed with Visual Studio 2005 using SQL server express as the database. I have four tables that I want to copy (structure only) from "express" to the hosted SQL server. I think I need to generate Transact-SQL statements to "create" the table structure, then run these statements as a stored procedure on the web based SQL server. I'm having trouble trying to figure out how to generate the code from SQL express 2005. Anyone had any experience with this?
thanks.
Hi,
first of all escuse my English. I'm new to SQL Server, my experience is with MySQL, Interbase and Firebird, but now I have a new job so I need to use SQL Server, version 2005 Express.
I have two SQL 2005 Express installations in two different machines (local and remote). I can access both servers via SQL Management Studio
I need to do the following:
1) Create a copy of a database with a new name in the same machine (local).
2) Copy the new renamed database to another host (remote)
Please help me, remember I use Express edition.
Thanks in advance.
Giorgio
Hi there
I'm pretty new to this SQL server thingie, and I have this question..
How do I copy a database from SQL Server 2000 to my local SQL Server Express? I have done this between 2000 before, but the manager for the express edition doesn't seem to have the copy task..
I really need to do this, since I have to work with a databse locally on my machine when developing...
I can't register my express server in the enterprise manager on the machine from which I need to copy the databse.. Seems to be a version incompability problem?
Does anyone have a solution for this?
Thanks,
Kenny
Two Windows 2003 server,one with SQL 2005 server,another with SQL Express.Is it possible to copy databases from SQL 2005 to SQL Express?Thanks.
View 6 Replies View Related
Can I migrate from SQL Exp. Edition 2005 to the Standard version, can that be done? If not, what do I need to know? If yes, what should I be looked out for?
Thanks,
I have an application which stores records on a local SQL Express and I need to move the records to a SQL 2000 database. I have the SQL 2000 server linked in the Express Management Console (under Linked Servers). I'm trying to use a stored procedure to accomplish this, but get an error "Invalid object name 'ngtxa4-rsmsz-01.newpurchase.tblRequest'." Express uses a table named tblTRequest in the TempPurchase database, while 2000 uses a table named tblRequest in a NewPurchase database. Here is the stored procedure I'm using:
USE [tempPurchase]
GO
/****** Object: StoredProcedure [dbo].[InsertRequestToMain] Script Date: 07/09/2007 08:54:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[InsertRequestToMain]
AS
BEGIN
INSERT INTO [ngtxa4-rsmsz-01].newpurchase.tblRequest
(fldRequestDate, fldRequiredBy, fldUserID, fldWorkAreaID, fldVendorID, fldClassID, fldEstimate, fldMemo, fldStatusID, fldStatusDate, fldSystemID,
fldtmpRequestID, fldUpdateCode)
SELECT fldRequestDate, fldRequiredBy, fldUserID, fldWorkAreaID, fldVendorID, fldClassID, fldEstimate, fldMemo, fldStatusID, fldStatusDate, fldSystemID,
tmpRequestID, UpdateCode
FROM tblTRequest
WHERE (fldHold = 0)
END
Any assistance with this would greatly be helpful. Thank you.
How can I copy a table from my sql server 2000 db to my sql server 2005 express edition?
I have a project in VS.NET 2005 and I have a db in App_Data folder. However, when I look into that folder, there is nothing visible. I now need to copy a table from my existing sql server 2000 to my db located in my project's App_Data folder.
Any help would be appreciated..
Regards,
How does one export/copy a database using Microsoft SQL Server
Management Studio Express? At this time, I have an existing
database that I can access and run queries against. However, I
cannot connect to it via Visual Wed Developer 2005 Express. At
this time, I'm getting the following error message with the existing
database:
Login failed for user 'bigide2_gims2'. The user is not associated with a trusted SQL Server Connection.
Next, I'm running everything locally. If anyone can assist, it would be greatly appreciated and thanks in advance.
-Conrad
Hi all,
I am using Visual web developper 2005 with sql server express 2005 and i have also sql server management studio express. it's all free now .
my web site is ready
I didn't have problem to upload my site to my hoster.
Now I want to upload all my tables and my stored procedure create locally with VWD express
How can i do it ?
NB: I know i can't design DB (create/modify tables and stored proc) with express edition
thank's for your help
Hi,I have(had) an old Win2k Server server with about 30 web site databases(SQL 2000) that just went under due to hardware problems. Thankfully, Ihave backups of all the databases plus the MDF and LDF files from thehard drive.I want to move all of these sites and their data to a newer server(Win2003) running SQL2000.What's the best way to copy the database from the old server hard drive(now mounted as an extrnal drive to a local machine; I'm currentlyFTPing all of the web site directories from it to the new server)?Just upload the original data to the new server and then mount the MDFand LDF files within the new SQL server? Or do I restore the backupfiles in the new SQL2000?All of my previous data migrations have been DTS operations from onelive server to another, so no experience with either of the abovescenarios. I'll certainly have a lot more experience at one of them bythe time this weekend is through.Thanks for any help you can offer.
View 1 Replies View RelatedCan anyone provide an expample of bulk copying XML data to a SQL table. I am also looking at using column mapping so that I can map fields and also insert a new GUID into the key of the SQL table.
Many thanks
I have an Excel add-in that connects to a SQL Server Express 2005database. I've decided to create a configuration piece for this add-inin Visual Studio 2005 Express. I added a data connection using the dataconnection wizard and all appeared to go well. Anyways when I attemptto open SQL Server Express to administer the database, it was corruptedand I had to restore it.I eventually got it to work correctly (I'm pretty sure I followedpretty much the same steps as before), but I was just wondering ifanyone had experienced problems like this? I find it a bit scary thatit may be that easy to corrupt the database by just creating a dataconnection.
View 2 Replies View Relatedi have a claims_tbl that i am inserting into with claim information, the tbl contains a claim_seq number that i want to copy over to a user_info_tbl at the same time insert user information below is what i have tried with no luck
insert into user_info(claim_seq) select Max(claim_seq) from claim_tbl
update user_info set lname =upper(@lname), fname =upper(@fname), mname =upper(@mname), personnel = @personnel, p_position =upper(@position)where claim_seq = (Select Max(claim_seq) from user_info)
i am getting duplicate rows of information ..........can someone help
thanks
Hi!
What is the best way to copy data from SQL server to Access database located on differet machines?
Thank you,
Elena.
Hello,
there is a database with an table x and I want a copy of that in my testdatabase.
I am pretty sure, that I have done that the whole last week, but it's not working anymore.
I thinkt, that last time I used a statement like that to copy the table with structure and all.
insert into dbtest.dbo.x select * from db.dbo.x
Today it's only telling me, that the destinationtabel x is not present.
The table has about 100 fields and I swear, I didnt create it by hand in the testdatabase, I'm definitely too lazy for that.
I can't use the enterprise manager, I only can use sql.
There are still tables in my testdatabase, I copied last week. So what is wrong with my insert into?
All,
Does anyone have amethod for copying db(all tables, procs etc..) but without the data. Scripting is not feasible because of number of objects constraints ..etc...
any help would be appreciated
thanks,
JB
hi
How to copy data from one column(field) to another column(field).
I have two column colA & ColB
Both column have data.
but i want to replace all ColB data with ColA.
it is like this,
COLA COLB
abcd grfr
dfere kieidk
fere fkerie
but, I want like this
COLA COLB
abcd abcd
dfere dfere
fere fere
please help me
I am trying to copy item names from one database to another if they share the same code number.
e.g.
UPDATE TABLE1
SET NAME = DB2.TABLE2.NAME
WHERE CODE = DB2.TABLE2.CODE
I dont know how to specify the second db as using a '.' here doesnt seem to work. I have also tried '..' and DB2.dbo.TABLE2 but get the same error - 'The column prefix 'Train_DB_FinancialsProd.dbo.ITEM_DEFINITIONS' does not match with a table name or alias name used in the query.'
I have checked that the spelling is ok so not sure why it doesnt work.
I have also tried using a temp db in between to copy the values across then try to update from the temp table but couldnt make that work either. e.g.
create table #tdhname
(
code char(50),
name char(100)
)
INSERT INTO #tdhname (code,name)
select distinct code,name from Train_DB_FinancialsProd..item_definitions tritm
where code = tritm.code
and tritm.ittyp_refno = 241
update pharmacy_items
set name = #tdhname.name <----- THIS DOESNT WORK
where #tdhname.code = code
Thanks!
hi their,How can i copy data in MS-SQL 2000 from one table to another withdifferent charactristic?thanks*** Sent via Developersdex http://www.developersdex.com ***
View 3 Replies View RelatedHelp!!! I am trying to consolidate 5000 odd databases. Each database contains hundreds of tables. The tables in each database are identical to the tables in all of the other databases. Sounds simple doesn't it? However, SSIS has defied every trick that I have applied to this task including changing connectionstrings at run time through package configuration. has anyone out there ever tackled a similar challenge?. Please let me know
Desperate
I have a laptop and a desktop that I both installed VWD and SQL Express. from my laptop, i see my laptop's name in the Server Name under data connections, but on the desktop, I only see an older Win2K Server with SQL 2000 in the list. Anyone know why my desktop doesn't show it's NAME?I can create new tables, users and all that stuff from the Management area. Thanks
View 3 Replies View RelatedHi: At the moment, I know how to copy a db to another (create a .bak file), but I am not sure what is the best way to copy one the table (with it data) from a db to another.Would u please give some links or suggestions?Thanks.jt
View 4 Replies View RelatedI am creating an ASP.Net project at work and have created a database in Microsoft SQL Server 2005. I need to copy data from an old database (which is in Access) that the company has used for years. The problem is that these databases are not very similar (the Access database is not normalized at all). My question is simply this -- is there an easy way to do this. I would like to avoid writing a lot of code if possible as this will only run one time. Any help would be appreciated. Thanks.
View 1 Replies View Related