I have installed Visual Web Developer Express 2005 with Sql Server Express, I can login with window authentication,
but I want to create different user and password that I can use to access a database I have created,
can anybody help me how to do this ?
Thanks.
My PC is Window XP Pro and I'm using Microsoft SQL Server 2005 Express and Microsoft SQL Server Management Studio Express.
My question is how to create a login userid and password under "SQL Server Authentication"? (as shown in http://www.findingsteve.net/print_screen.jpg)
Any tutorial about this I can read?
SQL Server 2005 Express keeps putting in a different password than the one I chose. I would check the properties on the login I want to change. Then I change the password and it gets accepted. When I try my web application, I get the dreaded "login failed for <loginname>". I look at the properties again and see my password never change. Is this a bug? I ever tried this syntax to no avail:
CREATE LOGIN <loginname> WITH PASSWORD='<mypassword>' CHECK_EXPIRATION = OFF, CHECK_POLICY = OFF
My goal is to write a DR plan where i am restoring all user databases onto a diffrent server in a event of hardware failure. I was trying to figure out a way to extract DDL of user accounts and their permissions on all user databases so i can simplify my DR documentation.Â
Â
This is the plan I came up with...to restore all system and user dbs on a different Physical SQLServer.
1. build named instance $PROD
2. restore master database
   - startup sqlserver in single user mode -m or DAC sqlcmd -S ServerName -U sa -P<xxx> –A
   net stop MSSQLSERVER$PROD
   net start MSSQLSERVER$PROD -m
   - restore database master from disk e:master.bak with replace;
  Â
3. start sqlserver normally
4. stop SQLServer agent
5. restore msdb
-restore database msdb disk e:msdb.bak with replace;
6. restart SQLServer
7. Restore User Databases.
8. Run Sp_change_users_login for all users
-Sp_Change_users_logins 'auto_fix','username'
Hi,
Does anybody know how to migrate the user's password along withe user names from one sql 7 server to another?
Thanks,
Jim
Hello all,
Being still a relative newcomer to SQL Server (people may say I'm trying to take on too much being somewhat inexperienced once they read about the problem I'm trying to tackle, but alas...) I'm running into the following problem: I need to create tables in my user database on the fly (using Stored Procedures) so that each table can be created many times in the database but only once for every user. The tables should be named something like "username.Table1", "username.Table2" etc. as opposed to "dbo.Table1". I then want to use the stored procedure from .NET/C# in my web application, so that i can create the complete set of usertables for each of my clients.
Now, I tackled the stored procedure part (that is, it creates all the tables I need with all the parameters I want) and am able to use it from my web application (which took some time to learn but proved quite easy to do), but I cannot seem to get it coupled to the current user (instead of the dbo). Every time I trie, the tables are created as dbo.Table1 and when I try to create a new set, it gives a warning ("table with name such and so already exists..."). I made sure to log in as an authenticated user (using forms authentication) before trying to create the tables but this gives the aforementioned result.
What am I doing wrong? I use Visual Web Developer Express, SQL Server 2005 Express and IIS version 5.1
Please help :-D
Greetingz,
DJ Roelfsema
Is it possible to create a new user name and password in a mail server with SQL or SQL only can create a new profile with a new username and password which has been created before in a mail server?
If it is not possible with SQL how can I do that? or should I use a diffrent mail server software(Now I'm useing windows 2003 mail server)
is there any way to create a username and password in a mail server with c#? mail server is mine
Sincerely
Kianoosh
Ok so I have a SQL server database set up and I can't figure out how to create the spot where the user's login password should go and also what the specifics of the password column should be.....and yeah....all help is appreciated
View 3 Replies View RelatedHi;I am making a software (.Net) which is going to connect a ms sql server but I cant conect yet :(.1- I dont know what I have to type for user id (name)2- What is my password, it has been long time that I hvae installed it but I dont need any password with Microsoft SQL Server Management Studio Express which has windows authentication option. My software can work via internet or network. So I need to know my user name and password. I am using oledbconnection. Do I need any password?3- I visited www.connectionstrings.com already so I have the format of it.Thanks very much for any help...
View 1 Replies View Relatedis it possible to create PW on Stored Procedure? No one can execute or Alter any Store Procedure with Password?
View 1 Replies View RelatedWe have a need to have separate password policies for different groups of logins. For example: Those IDs that have greater privileges should be rquired to have more complex passwords that expire more frequently than IDs with lesser privileges.
It appears to me that SQL Server pulls the password policy from the default Active Directory domain group. Is there a way to create/utilize multiple policies for SQL Server authenticated IDs?
Thanks for your assistance.
We need to use SQL Server Authentication for some reason and would like to enforce Password Policy with 90-day expiration period. I found "Change password" dialogue appears when I first logged in with the new user, but don't know
(1)what happens when the user failed to change the password before it's expired or
(2)how a user can change his password in advance of the expiration date with no particular server-level permission.
Help!!
I used to have an Access database which had tables for users, roles, actions etc.
This was used by a C++ client app (using ADO) which logged in, got the user ID and password (by raising a login dialog ) and then checked these against a user table and then assigned the roles and possible actions.
Now we have SWL Server Express 2005 - NT Authorisation - how do I get/pass the user ID to the C++ Application so it can get the associated roles? Seems silly to have 2 logins.
Better still can I do away with the App's User table or make its password column invisible to all users bar Admin and the C++ App?
Hi all,
View 7 Replies View RelatedHi!
Is it possible to double click the sql server express installer, it will install sql server 2005 in silent mode, set sa password..
Just want alternative of command installation on double click
setup.exe /qb INSTANCENAME=<InstanceName> SAPWD=<StrongPassword>
is it possible
thanks in advance
Hi all,
In my SQL Server Express (that is installed in my Windows XP Pro PC), SQL Server 2005 Network Configuration has Protocols for SQLEXPRESS. I tried to do "Enabling CLR Integration" in my SQL Server Express: (1) If I clicked on "Surface Area Configuration for Services and Connections", I got an error "An exception occurred in SMO while trying to manage a service, (Microsoft.SqlServer.Smo) Additional information: Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). (2) If I clicked on "Surface Area Configuration for Features, I got a different error "Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required computer has the required Windows Management Instrumentation components and then try again. (SQLSAC) Additional Information: An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo). Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). Please help and tell me how I should do to get "Enabling CLR Integration" in my SQL Server Express done and how I can create SQLCLR Project in VB 2005 Express.
Thanks in advance,
Scott Chang
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
Okay, I've read massive topics on ClickOnce, and embedded database applications, etc, etc.
I need a handful of good suggestions how I can create a deployment package, to get my sql express database onto a SQL Express server.
The database will need to be multi-user, because I am also developing a WinForms application to connect to the SQL Express database.
I'm thinking I need to use some automated scripting features, to generate scripts for the database once I am done (unless you have a better suggestion).
After that, I need to know what to do with those scripts, and how can I create a setup / deployment packages to run those scripts against a SQL Express server.
The other alterntative obviously is to copy my sql express database, and run an attach command. This will work the first time, only because this will have been the first deployment of this database.
Please keep in mind when answering this question, that I will not be embedding the database, and as far as I understand ClickOnce is a feature for use with embedded databases or user instance databases (not sure).
Daniel Crane
During an install of SQL Server 2005 Express setting the sa password does not work consistently. The install is being run as administrator and I am using an .ini file to pass the settings,
SECURITYMODE=SQL
ADDLOCAL=ALL
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
INSTANCENAME=DBSERVER
SAPWD=Westtech#1
and while most times it works correctly, occasionally, maybe 4 out of 10 times it fails to set the password and I have been unable to find any warnings or errors in the logs it generates.
We are coming up on release and this is causing us some real problems. Does anyone have any ideas, something I could look at?
Thank you,
Kathy Mook
Westbrook Technologies, Inc.
When installing SQL Server 2005 Express and using an .ini file that looks like this,
SECURITYMODE=SQL
ADDLOCAL=ALL
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
INSTANCENAME=DBSERVER
SAPWD=Westtech#1
sometimes the sa password is set correctly, while other times it is not. There does not appear to be any particular environment or system setting when it fails vs. when it works.
We are coming up on a release date and this is causing us a serious problem. Can anyone help?
Thank you,
Kathy Mook
Westbrook Technologies, Inc.
Hi all,
I have read/studied (i) Working with Databases in Visual Web Developer 2005 Express in http://quickstarts.asp.net/QuickStartv20/aspnet/doc/data/vwd.aspx, (ii) Xcopy Deployment (SQL Server Express) in http://msdn2.microsoft.com/en-us/library/ms165716.aspx, (iii) User Instances for Non-Administrators in http://msdn2.microsoft.com/en-us/library/ms143684.aspx, and (iv) Embedding SQL Server Server Express in Applications in http://msdn2.microsoft.com/en-us/library/ms165660.aspx. I do not understand the concepts and procedures to do Xcopy and User Instances for non-administrators completely-I do not know how to connect to databases and create database diagrams or schemas using the Database Explorer. I have a stand-alone Windows XP Pro PC. I have created a ChemDatabase with 3 dbo tables in the SQL Server Management Studio of my SQL Server Express and a website of my VWD Express application with an App_Data folder. I am not able to proceed to use Xcopy and user instance to bring the 3 dbo tables of ChemDatabase to my App_Data folder. Please help and give me some detailed procedures/instructions to bring the 3 dbo tables of ChemDatabase (or ChemDatabase itself) from the SQL Server Management Studio Express to the App_Data folder of the website of my VWD Express project?
Thanks in advance,
Scott Chang
Just like with Access DB, can we set password for database in SQL Server 2005 Express ?
Reason to do so is, user with Login having sysadmin previliage can acess all databases in SQL server.
so just want to restrict database access to only those users who knows the password.
Is there any possible solution ? Pls comment.
Thanks.
Hi guys,
My users are unable to view reports on server A. When trying to access it shows up as users have no access to the reports.
We have another server B which also deploys the same set of reports,to the same set of users as Server A.Users are able to view the reports on Server B.
Both server B & A are used for deploying reports that are created on another development server.I am very new to the concepts of IIS and report administration.Could someone tell me what I can start checking on? What are the settings that I can compare on both server ?
If I am not very clear on the problem explained above.Do let me know I would be glad to explain futher.
Can we able to create a database user name as €˜sa€™ in sql server 2k5?
Respected Members,
I have a question, when our aspx page is trying to access the SQL Server 2000 database than before this do we have to creaete a user with the name of ASPNET in SQL Server 2000, or without creating this paticular user(its the default user of ASP.NET account) our aspx pages can also access the SQL Server 2000,I have already SQL Server 2000 running in "SQL Server Authentication Mode" so while creating the user do I have to create it in "Windows Authentication" or "SQL Server Authentication", can you provide some link where I could find complete steps for craeting the ASPNET user or if some one can tell all the steps in details here.
I am using a SQL server 2008 database.I am working on a windows user.I noticed when I create a user in a database for a login, even that login does not exist in the database, the user is still successful created.I suppose it should error out.
Or I miss something?
I am using this script:
IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'mydomainmyuser')
CREATE USER [mydomainmyuser] FOR LOGIN [mydomainmyuser] WITH DEFAULT_SCHEMA=[dbo]
GO
Respected Members,
I have a question, when our aspx page is trying to access the SQL Server 2000 database than before this do we have to creaete a user with the name of ASPNET in SQL Server 2000, or without creating this paticular user(its the default user of ASP.NET account) our aspx pages can also access the SQL Server 2000,I have already SQL Server 2000 running in "SQL Server Authentication Mode" so while creating the user do I have to create it in "Windows Authentication" or "SQL Server Authentication", can you provide some link where I could find complete steps for craeting the ASPNET user or if some one can tell all the steps in details here.
I am havining problems connecting to my database in some projects.
I installed MSDE and didn't get prompted for any passwords. When I Initialize the connection and use: Integrated Security=aspi, the connection works ok for some projects but not for others, it doesn't seem to work with a server-side script block or from a sql dattabase that I created in the server explorer in visual studio VB.NET. When I test the dattabase connection in server explorer it works fine.
Is this intergrate securtiy supposed to work only with applications that connect to sample databases like the pubs database, and also not in server-side script?
How do I create a username and password for a default instance of MSDE?
I have found setup instruction on upgrading MSDE to create a username and password but I am not upgrading.
If I do create a username and password will initializing the connection with: Intergrated Security = aspi, still work?
I would apprecate any help I could get as I am a newbee.
Many thanks,
Glen Conaway
I have just installed MSDE (first time ever).
I am now trying to work with it (first time ever)
Most tools I now find I need to use, ask simple questions like:
Name of Server:
User Name:
Password:
I know the name of the server - fantastic
I did not specify a user name or password when installing -
WHAT DOES IT WANT ????
ie, How do you specify the user name and password AFTER installing the server.
GO ME ????????
PS - 'sa' and blank does not cut it at all.
Hi , how to create user defined functions in sql server 2005 to retrive data from multiple tables in asp.net....... Thank U!
View 4 Replies View RelatedHi,
I would like to create the folders Sales, Orders and Credit under the Home folder.
The Sales folder contains a set of reports that should be accessible to a group of users, similarly Orders folder contains a set of reports that should be accessible to a group of users.
I do not have facility to create user groups in SQL Reporting Service. I create a user group in my machine (from Control Panel) but Reporting service is not able to view this group.
I am able to add individual users to a folder, but I would like to check if I can create a group and then add users to this group.
Any help in how to resolve this issue.
Cheers,
I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.
I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.
This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..
The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
and I get
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF
although the same code executes perfectly from a command prompt.
Please does anyone have any experience with a similar problem and if so, how did you get round it?
Thank you
Ok, I need to add aspnet user to my database in SQL Server express. I have the SQL Server Mangament Tool Express CTP that i am using to do it.Anyway when i go to add the permissions for my user to the table I type it in and it returns back that there is no user that exists with that name. I then went to the top level for SQL Server Express and it has the ASPNET user. I don't understand why the engine itself can see it and use it but not my individual database.
View 6 Replies View Related