Hi,
I'm trying to run a script to add an index to a table. The index might already exist so I want to drop it 1st if it does.
Is there an equivalent to the following that I use for tables for indexes?
if exists (select * from sysobjects where id = object_id('dbo.tblFred') and sysstat & 0xf = 3)
drop table dbo.tblFred
Thanks,
Martin
I need a SQL or TSQL command (not a stored procedure) that will determine if a table exists (TBL_PARAMETERS). The command needs to return a 1 if the table exists or 0 if it dose not exist.
Thanks!
Sean
Great Monday Morning to one and all,
Setup: SQL7 w/SP4 running on W2K Pro
Table in Question:
I have a system that processes inserts that originate from automatic data collection subsystems on manufacuturing cells. The system processes about 2500 records a day. The system is isolated with no ready support or attention. My goal is to automate any and every reasonable admin task. My present activity centers on re-indexing the main table (receives the data from the inserts, supplies the data for web based reporting).
The table - tb_production_log - receives inserts that are time stamped and bear a Machine_id. The table has a clustered index built on the Machine_id (int) and Date_time (time of data's acquisition). The table only receives Inserts, the records are never Updated. No inserts are out of time sequence (no older records ever have to be 'wedged' in amongst existing records). Ulitmately, the table is tested daily for records with age > 365 days. Such records are Deleted.
For the past week, I have been running a monitoring stored procedure on my test box to track the fragmentation of the tb_production_log table. It's based on DBCC SHOWCONTIG with some extra tests. After capturing the SHOWCONTIG data, the sp runs a test query against the table to emulate a typical User report. I track the time this query takes. The query covers records over the last 7 days. (approx. 17,500 records involved). In addition, I track the time it takes Inserts to run. Inserts are done in batches from an external app. I get a RecordsPerSecond data point for each batch.
Great Monday Morning to one and all,
Setup: SQL7 w/SP4 running on W2K Pro
Table in Question:
I have a system that processes inserts that originate from automatic data collection subsystems on manufacuturing cells. The system processes about 2500 records a day. The system is isolated with no ready support or attention. My goal is to automate any and every reasonable admin task. My present activity centers on re-indexing the main table (receives the data from the inserts, supplies the data for web based reporting).
The table - tb_production_log - receives inserts that are time stamped and bear a Machine_id. The table has a clustered index built on the Machine_id (int) and Date_time (time of data's acquisition). The table only receives Inserts, the records are never Updated. No inserts are out of time sequence (no older records ever have to be 'wedged' in amongst existing records). Ulitmately, the table is tested daily for records with age > 365 days. Such records are Deleted.
For the past week, I have been running a monitoring stored procedure on my test box to track the fragmentation of the tb_production_log table. It's based on DBCC SHOWCONTIG with some extra tests. After capturing the SHOWCONTIG data, the sp runs a test query against the table to emulate a typical User report. I track the time this query takes. The query covers records over the last 7 days. (approx. 17,500 records involved). In addition, I track the time it takes Inserts to run. Inserts are done in batches from an external app. I get a RecordsPerSecond data point for each batch.
I need to write a script which will respond differently if a table's index forces uniqueness.
I am using SQL 7.0 and I am using the [sysindexes] table of my database to examine those indexes. I am using the [id] field from the [sysobjects] table for the table I am examining and I am using that [id] field to find like-valued [id] fields in the [sysindexes] table.
My problem is that I can't seem to determine, from an examination of the [sysindexes] table, whether, or not, an index is unique.
When adding an index, and checking the unique property of that index, the values that I get in the [status] field of [sysindexes] are different from the values which are supposed to show, at least according to the sysindexes (T-SQL) entry in SQL Server Books Online.
For instance, I have a table which combines two text fields which comprise the only key on a table. The unique and clustered boxes are checked in the index setup screen. When I look in the [sysindexes] table, the value in the [status] field is 2113554, which is not a value I see in the books online page. According to my books online page, a unique index should have a value of 2 in the [status] field and a clustered index should have a value of 16 in the [status] field. My assumption is that I should see a value of 18 in that [status] field, not 2113554.
I looks like the books online entry might be out-of-date because the field that is labeled [reserved1] in my books online page, is labeled [StatVersion] in my actual [sysindexes] table. That [StatVersion] field looks suspiciously like a Status Version field, possibly indicating that the Status field has undergone some sort of version revision?
Is anyone familiar with this stuff?
Thanks.
Ken
Is it possible to determine an index create date in SQL Server 2008 R2? The index in question is not a primary key.
View 8 Replies View RelatedI am trying to create an index in Enterprise Manager, but I am getting this message:
Index 'IX_CreatedBy_User' already exists.
The Help says:
An index already exists for table '<0s>' with the columns '<1s>'.
This index does _not_ exist in the table to which I am adding it, at least according to EM. In an attempt to view indexes as stored, I ran 'select * from sysindexkeys' in Query Analyzer, but I don't know how to read the 93 rows that it returns. I don't see any of the labels I assigned.
I have 37 tables and each has a uniqueidentifier-type field named 'GID_CreatedBy_User'.
I deleted all indexes named 'IX_CreatedBy_User' in all files. Then I was able to add the index to 2 tables, but I received the same error in the 3rd table.
I experienced the same problem earlier while adding indexes on another field, which is varchar(4) type. I started getting this message after creating that index in about 20 tables.
Is this an EM bug? Any help will be appreciated.
How can I test if a table already has a specific index present?
Id normally test for an object with: if object_ID('My Object') is null then...
What technique works with an index? Or can you use the object_Id function, how do you reference the index?
Many thanks.
I'm trying to drop indexes if they already exist then recreate them as needed, however, I'm getting an error if the index does not exist and I thought that's what the "IF Exists" statement was for.
syntax:
IF EXISTS (SELECT name FROM sysindexes WHERE name = 'idx_acct_no') DROP INDEX accounts.idx_acct_no
go
create index [idx_acct_no] ON [dbo].[accounts] ([acct_no])
go
Error when index does not exist:
Server: Msg 3703, Level 11, State 7, Line 1
Cannot drop the index 'accounts.idx_acct_no', because it does not exist in the system catalog.
Is there anyway to not get this error?
Hi all,
I come from MySQL.
In sqlserverce
I'm looking for an equivalent command..to
"DROP INDEX IF EXISTS inventory.idxItems"
or somthing similar so that I do not get an error or crash the C# app when I try to drop a nonexisting index..
also for droping a table.
please explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance
Hi,
This is on Sybase but I'm guessing that the same situation would happen on SQL Server. (Please confirm if you know).
I'm looking at these new databases and I'm seeing code similar to this all over the place:
if not exists (select 1 from dbo.t1 where f1 = @p1)
begin
select @errno = @errno | 1
end
There's a unique clustered in dex on t1.f1.
The execution plan shows this for this statement:
FROM TABLE
dbo.t1
EXISTS TABLE : nested iteration.
Table Scan.
Forward scan.
Positioning at start of table.
It's not using my index!!!!!
It seems to be the case with EXISTS statements. Can anybody confirm?
I also hinted to use the index but it still didn't use it.
If the existence check really doesn't use the index, what's a good code alternative to this check?
I did this and it's working great but I wonder if there's a better alternative. I don't really like doing the SET ROWCOUNT 1 and then SET ROWCOUNT 0 thing. SELECT TOP 1 won't work on Sybase, :-(.
SET ROWCOUNT 1
SELECT @cnt = (SELECT 1 FROM dbo.t1 (index ix01)
WHERE f1 = @p1
)
SET ROWCOUNT 0
Appreciate your help.
I am using Full Text Index to index emails stored in BLOB column in a table. Index process parses stored emails, and, if there is one or more files attached to the email these documents get indexed too. In result when I'm querying the full text index for a word or phrase I am getting reference to the email containing the word of phrase if interest if the word was used in the email body OR if it was used in any document attached to the email.
How to distinguish in a Full Text query that the result came from an embedded document rather than from "main" document? Or if that's not possible how to disable indexing of embedded documents?
My goal is either to give a user an option if he or she wants to search emails (email bodies only) OR emails AND documents attached to them, or at least clearly indicate in the returned result the real source where the word or phrase has been found.
Dear All.
We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions.
table is >> Order_Dtl
Columns are:-
Client_ID varchar 10
Order_ID varchar 50
Order_Sub_ID decimal
.....
...
..
.
Pk is (ClientID+OrderId+OrderSubID)
Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order.
The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination.
Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status)
My Question are:-
Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.?
Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.?
Q3. I want to check what indexes has been used? on what search?
Q4. How can i check what table was populated when, or last date of update (DML)?
My Limitation is i Dont Create a Partioned table. I dont have permission to do it.
In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003.
I am thank u to all who read or reply.
Arshad
Manager Database
Esoulconsultancy.com
(Teradata Master)
10g OCP
My SSIS package is running very slow taking so much time to execute, One task is taking 2hr for inserting 100k records, i have disabled unused index still it is taking time.I am rebuilding/Refreshing indexes and stats once in month if i try to execute on daily basis will it improve my SSIS Package performance?
View 2 Replies View RelatedKeep getting this error when positioning to the last page of a report.
Using Server 2003...SqlRpt Svcs 2000 sp2
Detail error msg:
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
Anyone have any suggestions? Any way to find out what collection is blowing?...or where parameter name: index comes from?
hello friends
i have table1 and 200 coulumn of table1 :) i have 647.600 records. i entered my records to table1 with for step to code lines in one day :)
i select category1 category2 and category3 with select code but i have just one index.. it is productnumber and it is primarykey..So my select code lines is so slow.. it is 7-9 second.. how can i select in 0.1 second ? Should i create index for category1 and category2 and category3 ? But i dont know create index.. My select code lines is below.. Could you learn me and show me index for it ?? or Could you learn me and show me fast Select code lines and index or etc ??? Also my search code line have a dangerous releated to attaching table1 with hackers :)
cheersi send 3 value of treview1 node and childnode and child.childnode to below page.aspx :)
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Me.IsPostBack Then
If Request("TextBox1") IsNot Nothing ThenTextBox1.Text = Request("TextBox1")
End If
If Request("TextBox2") IsNot Nothing ThenTextBox2.Text = Request("TextBox2")
End If
If Request("TextBox3") IsNot Nothing ThenTextBox3.Text = Request("TextBox3")
End If
End If
Dim searchword As String
If Request("TextBox3") = "" And Request("TextBox2") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "'"
End If
If Request("TextBox3") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "'"
End If
If Request("TextBox3") <> "" And Request("TextBox2") <> "" And Request("TextBox1") <> "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "' and kategori2= '" & Request("TextBox3") & "'"
End If
SqlDataSource1.SelectCommand = searchword
End Sub
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??
Thanks
I have a clustered index that consists of 3 int columns in this order: DateKey, LocationKey, ItemKey (there are many other columns in this data warehouse table such as quantities, prices, etc.).
Now I want to add a non-clustered index on just one of the other columns, say LocationKey, like this:
CREATE INDEX IX_test on TableName (LocationKey)
I understand that the clustered index keys will also be added as key columns to any NC indexes. So, in this case the NC index will also get the other two columns from the clustered index added as key columns. But, in what order will they be added?
Will the resulting index keys on this new NC index effectively be:
LocationKey, DateKey, ItemKey
OR
LocationKey, ItemKey, DateKey
Do the clustering keys get added to a NC index in the same order as they are defined in the clustered index?
Quick question about the primary purpose of Full Text Index vs. Clustered Index.
The Full Text Index has the purpose of being accessible outside of the database so users can query the tables and columns it needs while being linked to other databases and tables within the SQL Server instance.
Is the Full Text Index similar to the global variable in programming where the scope lies outside of the tables and database itself?
I understand the clustered index is created for each table and most likely accessed within the user schema who have access to the database.
Is this correct?
I am kind of confused on why you would use full text index as opposed to clustered index.
Thank you
Goldmember
Hi All,
I 'm working to improve some sql performance.
One of the major syntax inside the SELECT statment is ..
WHERE FIELDA IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='A') AND
WHERE FIELDB IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='B') AND
WHERE FIELDC IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='C') AND
WHERE FIELDD IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='D') AND
WHERE FIELDE IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='E') AND
WHERE FIELDF IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='F')
(It's to compare the field content with some user input parameter inside a parameter table... )
I think properly is that the SELECT ... IN is causing much slowness in the sql statement. I have indexed FIELDA , FIELDB, FILEDC etc and those PARAVALUE and PARATYPE in the PARATABLE table. But perfromance is still slow and execution takes >20 seconds for 200000 rows of records.
Do any one know if still any chance to improvide the performance like this?
Much Thanks,
Andy
I'm trying to find whether there is a dmv or system view that can help me see the last time an index was rebuilt or created. Assuming I rebuilt an index using tsql commands (not a job with a history), is there a way to find out the last time that index was rebuilt?
Thanks much.
Hi all,
How to determine the value for the bar in Neural Network Viewer? I know the value is displaying in the tooltips when we pointing to the bar in the table but i don't know how to get them. So where can i get those of calculation or data of score, probability of value1 and 2, and lift for value1 and 2 ? Is it get from the Microsoft Neural Network Content Viewer? which column and how to calculate? If not, please advise.
Hope my question is clear.
I am looking forward to hearing from you shortly and thanks a lot in advance.
Thanks!
With best regards,
Yours sincerely,
xuenly
I have a really strange problem.
I execute this query:
declare @cid int
set @cid = 2003227
select * from sales s, product p where p.product_Id = s.product_Id and customer_id = @cid
select * from sales s, product p where p.product_Id = s.product_Id and customer_id = @cid or @cid = 0
3 Million rows in sales, 120000 in product.
The first does and index seek, the second an index scan.
The execution plan reports that the scan takes 99.87% of the cost, and the seek takes 0.13%
This problem obviously gets worse the bigger the dataset / query /etc.
The reason I query this, is because it never used to take this long to do index scans. Is there something i can change, something i can fix?
Any help would be appreciated.
Josh
Hi,
I just want to know whether any advantage or disadvantage
in doing Reorganize Index And Rebuild Index ....
Plz do comment on this ASAP !!!!
Thanks in advance
Regards
Arv
Hi,
I just want to know whether any advantage or disadvantage
in doing Reorganize Index And Rebuild Index ....
Plz do comment on this ASAP !!!!
Thanks in advance
Regards
Arv
Hello I want to learn disparity clustered index or nonclustered index and in queries which one run better.
example
select * from orders where orderID=5
to this query clustered or nonclustered
thanks
I am trying to determine the next available order id using the method below. It works provided the table has a record in it. If it doesn't I get the error "Input string was not in a correct format." I am certain that it is because the query is returning a value of NULL. How can get around that or check for the NULL value?' Establish data connection...Dim sqlConn As New SqlConnection(ConfigurationSettings.AppSettings("connectionstring"))'Determine order id number...Dim order_id As IntegerDim strSQL As StringstrSQL = "Select MAX(order_id) from mkt_order"Dim sqlCmd As New SqlCommand(strSQL, sqlConn)Dim sqlDA As New SqlDataAdapter(sqlCmd)Dim sqlDS As New DataSetsqlDA.Fill(sqlDS, "item")If sqlDS.Tables(0).Rows.Count <> 0 Thenorder_id = Convert.ToInt32(sqlDS.Tables(0).Rows(0)(0).ToString()) + 1Elseorder_id = 1End If
View 1 Replies View RelatedGood day,
We have a web application (ASP) running on SQL Server 7.0.
Recently, the users are getting quite a lot of timeouts on
the database:
Microsoft OLE DB Provider for ODBC Drivers error '80040e31'
[Microsoft][ODBC SQL Server Driver]Timeout expired
The database is not supposed to be doing too much work, so I can't
understand why these timeouts are occuring. How can I determine
the cause of the timeouts?
The cause could probably anything from a trigger that's taking
too long, a query that's taking too long, or simply bad database design.
I've looked at SQL Server's Profiler, but could not yet use it
successfully to give me any hints of what could cause the timeouts.
Any ideas of how I can use Profiler, Performance Monitor, or any other
tool(s) to see what is happening in the background in the database,
i.e. how much processing a trigger is using, etc.
Thanks very much!
---
Gert Lombard
OSI Airport Systems
South Africa
I'm new to full text catalogs and we have a vendor who's code utilizes them. The database server is SQL 2005 and I am noticing the following message in the SQL log every minute.
Changing the status to MERGE for full-text catalog "ResearchCatalog" (5) in database "DBA_Test" (11). This is an informational message only. No user action is required.
A SQL job is running the following command every minute.
exec sp_fulltext_catalog 'ResearchCatalog', 'start_incremental'
What is the typical frequency for running an incremental?
Can the messages be suppressed?
Thanks, Dave
for sql servers how can i determine who [what accounts] are the dbas?
View 1 Replies View RelatedI've been doing a lot of reading on this and my head is starting tohurt! It seems to be quite a feat to work out how much memory isactually being used by our server.I'm running W2K advanced server with SQL 2000 EE, 8GB of RAM, a min of4GB and a max of 6GB is assigned to SQL server.I'm trying to work out whether we've assigned enough or toomuch/little memory to SQL server. My first thought was to let SQLdymanically manage its own memory and see how much it uses, of coursewhen AWE (/3GB /PAE) is enabled it will just use all that isavailable.In perfmon "target server memory" = 6.1GB, "total server memory" =6.1GB, "total pages" = 768000 ( x 8KB = 6.1GB).My second thought was to use "total pages" - the average "free pages"= average mem used, therefore giving me the average amount of memoryused by SQL. I found out that SQL uses a min of 4GB (the min weassigned) and the max of all the memory, 6GB.Is there an easier way of finding out how much memory is actually usedin this situation or is going by the above average the best way?What i'm unsure about is will SQL just use all memory assigned to ituntil it has the whole DB in memory? 20GB including indexes etc....Any help would be greatly apprechiated.
View 2 Replies View Related