I'm trying to easily change a value in 80 ssis configuration files from "localhost" to "myservername". I downloaded WinGrep to do this, but it's balking on some of the files, saying that they are binary files.
Does anyone know how to make the *.dtsconfig files NOT binary in SSIS?
Any suggestions GREATLY appreciated.
I won't go into the reason I have my servername in 80 places...
after i attached the file in package configurations .
i was unable to see the db connection in connection managers.
i tried to attach the .dtsconfig file in (New OLEDB connection manager) but after clicking the test connection " Testconnection failed because of an error in intializing provider.The connectionString property is not intialized"
I was requested to build and move and existing SSIS package from the developers local PC to the Dev server. Both are running SQL 2K5, I built the following command file so SQL Agent can run the import job.
REM *** Run for FileImport set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig "C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigFileImportFileImportLoadData.dtsx"
All files are in the proper place but when the jobs runs the following message shows up in the history;
Message Executed as user: LIGHTHOUSE1SQLEXEC. ...system32>set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig C:WINDOWSsystem32>"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigDEVFileImportLoadData.dtsx"Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:54:00 AM Warning: 2008-05-08 08:54:01.77 Code: 0x80012014 Source: FileImportLoadData Description: The configuration file "FileImportLoadData.dtsConfig" cannot be found. Check the directory and file name. End Warning Warning: 2008-05-08 08:54:01.77 Code: 0x80012059 Source: FileImportLoadData Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Progress: 2008-05-08 08:54:01.82 Source... Process Exit Code 0. The step succeeded.
My questions is how do I fix this and is this really and error?
I use an XML configuration file for my SSIS package, and I have "Enable package configurations" checked. When I build the package, however, there is no dtsConfig file in the output (set to in) or the Deployment folder, and the config file is not included in the SSISDeploymentManifest file. There are no build errors or warnings.
This was working fine the last time I worked on this package (~9 months ago), but not now. I have since installed SP2, but can't confirm if the problem is related to a "fix" in SP2.
Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:01:27 PM Warning: 2007-11-30 22:01:29.52 Code: 0x80012012 Source: Package Description: The configuration file name "C:DevelopmentdtsConfig.xml" is not valid. Check the configuration file name. End Warning ...
But then it goes on to read values from my Production config file. How can I stop the annoying warning about my Development config file-path (which doesn't exist on the Production machine)
I am migrating from local to Dev,QA and Prod. I created a .dtsconfig file containing database connection strings to Dev database. What is the "location" on the Dev server where this .dtsconfig file nees to be deployed to??
I have setup a package configuration and it ran fine; however, I would like to be able to use the script task to change content of the dtsConfig file. For example, I can get the newServerName using the SQL Task, then how can I assign the newServerName value to the DataSource in the package configuration file? Is this possible?
I've deployed my ssis pkg to the server and created a sql job to run this pkg. So far, everything is fine. Today, I got a request to change some variables inside the package which is part of the .dtsconfig. I want to edit the deployed .dtsConfig but it won't allow me and always complained that this file has been opened by another program. I am sure i've closed my ssis designer and other notpad, why can't I edit and save .dtsconfig file?
When adding a SSIS DTSX package solution to Sourcesafe the SSIS Package Configuration file (.DTSConfig) is not included. We are using sourcesafe version 6.0d and Visual Studio 2005 Team Edition for Developers.
Hi Guys, how many connections does sql 2005 express allow to .mdf file. I stumpled on info on a microsoft site (actually a forum post on msdn) that sql server express allows only a single connection to an .mdf file. Iam intrested in this because i developed reporting services reports in BIS and iam having problems. If i run a report from report manager, i have to wait for close to 20 minutes before i can be able to run my asp.net application agian. Else if i insert data or retrieve data from my asp.net application, then i have to wait again for 20 minutes or more before i can be able to run my reports else i will get an error that a connection can not be made to the database or that the database is being used by another process. So in all cases, i have to wait for 20--30 minutes before a connection can be made to the .mdf file. i.e after running a report or after inserting or retrieving data from the database through my asp.net application. Iam using sql sever 2005 express with advanced services and visual web developer on windows server 2003. Any ideas or help.
Hi, i'm new in this forum and in SSIS, so I apologize if mine is a stupid question and also for my english.
I have this problem: i have to develop an ETL package and i have to set the transformation between input and output columns using a configuration file, i.e. my client want to change the transformation simply modifying a config file( for example from UPPER to LOWER ).
I tried using dtsconfig and setting EvaluateAsExpression with value 1( true ) and Expression UPPER[Column 2] but i get an error saying that Column 2 is not a variable.
I have an SSIS package with a small number of connections for various databases, both SQL2K5 and AS2K5.
When I build the package the .dtsConfig file is produced but the contents for some of those connections are not accurate relative to the package itself. There are some old values retained in the .dtsConfig file.
Worse, when I deploy the package to another machine the installation should allow me to change these values to ones appropriate for the new server. While I am able to change them they are not retained and the old values crop back up making the package fail during execution.
Any idea where I can smack this thing to unstick these values?
Would specifics help? I can post the file(s) if need be.
Apologies if this has been posted before and feel free to point me to an existing thread if it has.
I currently have a dev, stage and live environment for a package
i have created a load.dtsconfig file that contains various bits such as connection strings, email to, from, etc which i created via the package configurations in the dev package. I then made a few changes via XML Notepad
I went to use the same config file on stage and decided to add a further property. I selected package configurations on stage and selected edit it the package configurations box, added the property and clicked finish. However it reset all the existing properties to the values that exist in the actual package so all the changes i made via XML notepad were overwritten.
Is there anyway you can get the Package configurations editor to retain the values from the .dtsconfig file rather than reading in the values from the package???
hi, all; i'd like to resolve this problem: We are Developing packages in Dev.Server; if we are Deploying our packages to Prod.Server; we need to modify the connection string and related properties of the connection manager. 1. How to modify the connection manager while deploying to production server? 2. can we create 2 dtsconfig file for a single package; is there any mechanism for instructing sequel server to use a particular dtsconfig file for our package.
i modified the config file in order to change the connection string. but its affecting only the config file not the package. while running the package its reffering the old connection string only.
hi i want to know what are the purposes of dtsconfig file for the package. once we deploy our package, if we want to modify the connection string for the new excel source or data source or destination, how to modify the connection details at client site, or in the server,
please help me to modify these connection details after or before deployment at server machine.
I am going thru the Integration Services Tutorial found in Books Online and I'm on Lesson 3. It has to do with creating a configuration file for the source file location. I followed the steps and now I need to open the .dtsConfig file and type in the folder location.
The exact direction says,
"
In Notepad or any other text editor, locate and open the SSISTutorial.dtsConfig configuration file that you created by using the Package Configuration Wizard in the previous task.
Change the value of the ConfiguredValue element to match the path of the New Sample Data folder that you created in the previous task. Do not surround the path in quotes.
Save the change, and then close the text editor. "
When I open the file, I see this. What am I supposed to do here?
it would be really useful. it looks like the .dtsconfig file needs to be maintained on each install independently. This makes maintenance a nightmare. it would be a lot nicer if the .dtsconfig files were more like templates rather than hard coded values to specific system resources.
When I edit package configuration files inside of Visual Studio, it puts all the XML on a single line. Does anyone know how to automatically spread the information onto multiple lines, to make comparing file differentials easier.
what the meaning of the TextQualified attribute on a flat file connection is? I am importing delimited flat files where text columns are not qualified by quotes. If I use the Suggest Types button in the Flat File Connection Manager Editor, it sets TextQualified to True for all columns. Importing works fine than, but it also does with TextQualified = False.
I have a package that does simple exporting from an excel sheet to a table. I used a Dataflow task with Excel Source and OLEDB Destination Components. And i created Package configurations for Source and Destination Components. After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
I have a job/step that call a Fileprocessor.dtsx package with 4 different config files. I need to make a enhancement to the job to call the same package using a new (parent) package with multiple iterations based on some business condition.
I am going to modify the job/step to call ParentFileprocessor now with same all 4 config files which in-turn have a call to run Fileprocessor.dtsx; my problem is, how do I pass all 4 config files for child call? Using which task?
I m not allowed to modify Fileproessor.dtsx (to be child pkg) SQL2012, MSDB package deployment model.
Hi there, Here we have got a asp.net application that was developed when database was sitting on SQL server 6.5. Now client has moved all of their databases to SQL server 2000. When the database was on 6.5 the previous development team has used oledb connections all over. As the databases have been moved to SQL server 2000 now i am in process of changing the database connection part. As part of the process i have a login authorization code. Private Function Authenticate(ByVal username As String, ByVal password As String, ByRef results As NorisSetupLib.AuthorizationResult) As Boolean Dim conn As IDbConnection = GetConnection() Try Dim cmd As IDbCommand = conn.CreateCommand() Dim sql As String = "EDSConfirmUpdate" '"EDSConfirmUpdate""PswdConfirmation" 'Dim cmd As SqlCommand = New SqlCommand("sql", conn)
cmd.CommandText = sql cmd.CommandType = CommandType.StoredProcedure NorisHelpers.DBHelpers.AddParam(cmd, "@logon", username) NorisHelpers.DBHelpers.AddParam(cmd, "@password", password) conn.Open() 'Get string for return values Dim ReturnValue As String = cmd.ExecuteScalar.ToString 'Split string into array Dim Values() As String = ReturnValue.Split(";~".ToCharArray) 'If the return code is CONTINUE, all is well. Otherwise, collect the 'reason why the result failed and let the user know If Values(0) = "CONTINUE" Then Return True Else results.Result = Values(0) 'Make sure there is a message being returned If Values.Length > 1 Then results.Message = Values(2) End If Return False End If Catch ex As Exception Throw ex Finally If (Not conn Is Nothing AndAlso conn.State = ConnectionState.Open) Then conn.Close() End If End Try End Function ''' ----------------------------------------------------------------------------- ''' <summary> ''' Getting the Connection from the config file ''' </summary> ''' <returns>A connection object</returns> ''' <remarks> ''' This is the same for all of the data classes. ''' Reads a specific connection string from the web.config file for the service, creates a connection object and returns it as an IDbConnection. ''' </remarks> ''' ----------------------------------------------------------------------------- Private Function GetConnection() As IDbConnection 'Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection conn.ConnectionString = NorisHelpers.DBHelpers.GetConnectionString(NorisHelpers.DBHelpers.COMMON) Return conn End Function in the above GetConnection() method i have commented out the .net dataprovider for oledb and changed it to .net dataprovider for SQLconnection. this function works fine. But in the authenticate method above at the line Dim ReturnValue As String = cmd.ExecuteScalar.ToString
for some reason its throwing the below error. Run-time exception thrown : System.Data.SqlClient.SqlException - @password is not a parameter for procedure EDSConfirmUpdate. If i comment out the Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection and uncomment the .net oledb provider, Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection then it works fine. I also have changed the webconfig file as below. <!--<add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;Auto Translate=True;Persist Security Info=False;Provider="SQLOLEDB.1";' />--> <add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;' />
Hi all, I need one more help! we can select the dtsconfig file with the Environment variable(indirect configuration); but i need to select the configuration file at runtime; i've to load the package from the server and apply local configuration file to the package and run in a web server;
Requirements; 1. i have packages with its xml configurations for connection strings alone! 2. i deployed it on the server 3. Trying to execute the packages in a web page onclick event;
We have ASP.net WebPage; in On_Click Event, i have this code;
Application ap = new Application(); Package pk = ap.LoadFromSqlServer("\PROJECT", "itsssqldb", "pmo_package_user", "password", null); pk.ImportConfigurationFile(@"Packagesdev_staging.dtsConfig"); pk.Execute(); here PROJECT is the Package name; i'm loading the package from the Common Sequel Server 2005; and applying the configuration file to that package and trying to execute this; but its not using the config file what i mentioned; its returning failure!!
Can you please help me to resolve this issue!,
(The intention of doing this job is to select the configuration file( prod, dev) at runtime)
Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
Hi I have some simple questions of for MS SQL. Say I have a database with a table Called Company. In this table I have Employee's with these columns(EmployeeID<PK>, FirstName, LastName) Now I am inserting some data like this.EmployeeID FirstName, LastName------------------------------------------------------- 1 Bob Smith2 Joe Mitter Now Say I have this situation(this will look weird for this example but for another examples and the stuff I am working on it make sense). Say I have a new Employee Called Jessica White. Jessica must be the second record. So I need to insert it between the 1st and 2nd record. Like I said I am very noob at doing this stuff so I am not sure how I would do it. I first was going to my table and then went to modify. This brought up a blank grid with all my column names. I then started to add all my data in. I found out later to make my life easier I need to enter in certain spots null rows in it to help with formating(otherwise I would have had to figure out a way to do make null rows with c# code). I then went back to this grid and I tried to add a record before the data just like you if you used excel. I quickly found out you can not do that. This resulted me having to recreate the table and reput the all the data back in(this told me I was doing something very very wrong). I was then thinking of writing it with a query and I been playing around with it and still running into problems like say I had a table called test with a coloum called id<PK> and testss(yes bad names just playing around though).So if I did something like this:INSERT INTO testVALUES(2)INSERT INTO testVALUES(1)SELECT * FROM testNow I am trying to figure out how to insert something between rows 1 and 2. Would I have to drop the table or delete all the data and then run a saved copy of my script with the added change or what?My second question is what is a good site that has examples of all the commands(I don't want to read a book on it I have had a oracle sql course and well it was just boring and I did not learn too much.). I think the best way for me to learn is just continue doing my site and picking it up on the file and when I got a problem read about it and ask on the forums. Thanks
Very strange event. Installed new machine into NT 4 network, which has a PDC and a BDC. We have copies of all SQL databases on both the PDC and the BDC. I installed SQL 7 on new workstation. Throught Control Panel/ODBC connections I can reach the SQL files on bith the PDC and BDC. Howver when I try to use Enterprise Manager, I can connect to the tables on the PDC, but not the BDC. SQL lists both machines in the server group, but only allows me to access tables on PDC! Here is the Event information that I recived on the BDC:
The computer IVR1 tried to connect to the server NTBACKUPSERVER using the trust relationship established by the MASSCOM domain. However, the computer lost the correct security identifier (SID) when the domain was reconfigured.
HI all, I have a problem here. I am having two computers both are loaded windows NT 4.0 AND SERVICE PACK 4 AND ALSO I INSTALLED SQL SERVER 7.0. Now i want to connect those two servers , so pls anyone suggest me how i have to do.I connected both servers thru HUB. Pls suggest me.. thank u..
I figure anyone who has done VB and SQL Server might have run into this. > > I am set up as a DBO on SQL Server with access to db1 and db2. My default > is set to db2. From my local machine, I can log through VB(DSN-less) in > to > either one without a problem. BUT, if I go to another machine and try to > log in through VB(DSN-less) to db1, it rejects my login. Here is my > connect > string : > > UID=xxxxxxx;PWD=pedro;DATABASE=db2;DRIVER={SQL > Server};SERVER=Athens;DSN=``; > > The only thing that changes when I log into db1 is the database parameter- > "DATABASE=db1". > > Am I doing something wrong here? Is there something that needs to be > setup > differently in SQL Server? Do I need to put something else into the > connect > string? > > This happens for the other developers as well, not just me. > > Any help would be GREATLY appreciated.
I am looking for some ideas on the following DTS challenge: I need to import the data from an Access 97 database into a set of tables(about 25). The location of the database can be anywhere on the users drive(s) and I will need to get the location of the database from a registry setting and use it to define the connection.
We have a case where a user is using Excel sheet to connect the database on SQL2K and generally his connection runs in the upper 150 in numbers. He generally gets more than 150 connections open.
I know that it's not a good thing, but is there a way to limit it or even kill it after it reaches max?
What are the disadvantages of opening too many connections?