I believe all of us use SQL Server Management Studio to execute query. As I encountered serious problem with this method, due to typo error by accident, I am wondering if we can run the .sql file from dos and supply parameters with it.
Possible?
I have a query that provides a list of detachments that are used as a parameter for the user to select when running a report.
It works fine.
I want to set up this report to also run on a schedule.
When I set the prameters on the report for any value other than the first one in the list it fails to execute with the following error.
Parameter validation failed. It is not possible to provide valid values for all parameters. (rsParameterError) (there are no other details provided)
The query results are
All
A
B
C
D
E
G
H
I
N
V
W
X
I get this error if I input a value in the list other than All or any value that is not in the list. Any suggestions?
We are running Report Services 2000 SP1
Many thanks Ayla
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I know you can pass parameters into a Direct Input and a Stored Proc in the Execute SQL Task Editor, but can you pass parameters to a File Connection? If so, then how would I do that?
Thank you,
Steve...
Hi,
we have a Package, that worked fine for a long time. Now, it always fails on all computers with SP2 instaled. The problem apears in execute sql task, which uses ole db connection manager and calls a procedure with some input parameters (from sql server).
Package sends a undesirable data (".") into the procedure from variable, which has NULL or Empty string value. Originaly, data type of the Variable was Object, I tried to use also string, but in both cases the procedure was called with parameter "."
Please, can anybody tell me what's wrong?
Thanks
Janca
I want to learn how can achieve as the subject say, thanks!
View 4 Replies View RelatedEXECUTE sp_makewebtask
@outputfile = 'd:WEBmultiple11.htm',
@query = 'SELECT title, price FROM titles' ,
@templatefile = 'd:WEBTemplate.htm',
@dbname = 'pubs', @rowcnt = 5, @whentype = 9
hi, running the above code will create html page. Ineed to pass @price as a parameters, how can I do that, thanks for your help
Ali
Hi
SQL server 2000 DTS Problem
I'm trying to pass the value of a global variable
as an input parameter in a 'execute sql task' DTS object.
However, SQL refuses to accept the global variable
assigned to the input parameter '?'. When you run the
DTS package the error message 'no value given for one or
more parameters' appears.
When you save / exit the DTS object by clicking OK, and then go
back into it, the 'input Global variables'
parameter field is empty again.
Searched msdn/knowledgebase to no avail - please help ! Thanks
Help much appreciated please !
Hi,
I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions.
EXAMPLE:
TASK#1
TABLE-A :has queries below
select count(*) from employee
select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2
Then I have another SQL task(may be SQL task) which use the value @counts make some decisions
If @count > 1 then pass
If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
Hi,
I have an Execute SQL Task in my SSIS Package.
Now, this Execute SQL Task has the following query (Connection Type is OLE DB):
Code SnippetSELECT dbo.udf_CommonDateTime_Get (GetDate(), ?) As User_Datetime
I want 2 things from this Task:
1) It should take the 2nd argument to the UDF from a variable.
2) It should store the value returned by this SELECT statement into another variable.
So, I go ahead and modify the Parameter Mapping for the Task. Here I add the Input variable name, Data type and I give the Parameter Name as 0.
I also modify the Result Set for the Task. Here, I specify the Result Name as User_Datetime and give the appropriate Variable Name.
I am getting an error here and I believe it is due to the input parameter. The UDF is not getting the 2nd argument correctly.
My questions:
1) Has the Execute SQL Task been designed to handle UDFs like this. If not, then where am I going wrong?
2) What is the work-around for this? I need to pass a parameter (variable) to the UDF.
Thanks in advance.
Regards,
B@ns
The error message is:
Code Snippet
Execute SQL Task: Executing the query "SELECT dbo.udf_Common_DateTime_Get (GetDate(), ?)
As User_Datetime" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Set UserDateTime
Hello,
I have several DTS packages that take data from SQL Server and exports them onto an Access DB located on the network. Basically, one Execute Process Task from within my DTS package takes the Access DB and zips it while another such task copies the zipped DB and pastes it onto another location on the network. All this works fine.
This export process happens once a month so each month I have to manually add a datestamp to the end of the Access DB file that’s being exported to distinguish it from prior month's export. For example, this month's export file would have AccessDB_20040727.mdb name and the next month it would be AccessDB_20040820.mdb (date is determined based on the date the output is exported on). AccessDB.mdb is the default name of the export DB and datestamp is added at the end of the file name depending on what date the export was run. As I said, I can do this manually each month and it works fine.
I want to, however, know if there is a way to automatically supply the datestamp to the Execute Process Task's Parameters' text box? Following is what I have right now in the Parameters box:
\ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All_20040727.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
I want to take above text from the parameters box and replace it with something like:
\ghf1-ndc8-sqll$productionoutputlob200406FileName_RunDa te.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
Where FileName_RunDate is a variable/placeholder for the name of the output with the datestamp the output is exported on.
There are three different Execute Process Tasks that are happening within each of my DTS packages so it's a time consuming job to have to manually add a datestamp to each package every month when data is exported.
Does anyone know if what I am asking is doable? If I can use a variable in the parameters box of each Execute Process Task’s properties and supply current datestamp values to it prior to executing the package each month? If so then what are the ways? How would I do that?
Thanks much.
JN
Here is my stored procedure:
ALTER PROCEDURE dbo.SP_UpdateFixedRev
/*
(
@parameter1 int = 5,
@parameter2 datatype OUTPUT
)
*/
(
@Number int,
@FixedRev money
)
AS
BEGIN
/* SET NOCOUNT ON */
Update Ticket set FixedRev = @FixedRev where Number = @Number;
End
Here is my code:
Dim dbConn As New OleDbConnection
Dim dbComm As OleDbCommand
dbConn.ConnectionString = connStr 'connStr is class-level vrbl
dbConn.Open()
dbComm = dbConn.CreateCommand
dbComm.Parameters.Add("@Number", OleDbType.Integer).Value = txtDatabaseTicketNo.Text
dbComm.Parameters.Add("@FixedRev", OleDbType.Currency).Value = txtFixedRev.Text
dbComm.CommandText = "SP_UpdateFixedRev"
dbComm.CommandType = CommandType.StoredProcedure
dbComm.ExecuteNonQuery()
dbConn.Close()
However its not updating my database when I run the app from a button click event.
Hi,
I need to run an SQL command, in which one of the fields is based on the current time, represented as a string in a specific format.
I used a script task to create the string from the current time, and store it in a package variable named "newDate". Later, in the execute sql task, I have the following update statement: "update table_1 set field_1 = ?" (OLE DB connection is used)
and in the parameters mapping I set parameter 0 to the string package variable "newDate".
The problem is that on runtime, the sql executes with the default value of the variable - i.e. it doesn't take the new value.
I checked it and placed another script task after the first one, that simply tries to read the variable "newDate" and print it to screen, but even here the default value is used.
how can I use the new value of the variable?
thanks.
Hello, a question please. Could anyone say me if I can create a store procedure with 2 'select's statements into. Besides, I'd want to know if I can execute a "select" depending on input parameters.
Something like this:
create storeproc
Param1, param2
if param1 <> null
Select *
from table
where id = param1
else
Select *
from table
where id = param2
end if
Thanks in advance....
Hi everybody, I would like to know if it's possible to execute a stored procedure, passing it parameters, using not CommandType.StoredProcedure value of sqlcommand, but CommandType.Text.
I tried to use this:
sqlCmd.CommandType = CommandType.Text
sqlCmd.Parameters.Add(sqlPar)
sqlCmd.ExecuteNonQuery()
With this sql command:
"exec sp ..."
I wasn't able to make it to work, and I don't know if it's possible.
Another question:
if it's not possible, how can I pass a Null value to stored procedure?
This code:
sqlPar = new SqlParameter("@id", SqlDbType.Int)
sqlPar.Direction = ParameterDirection.Output
cmd.Parameters.Add(sqlPar)
sqlPar = new SqlParameter("@parent_id", DBNull)
cmd.Parameters.Add(sqlPar)
doesn't work, 'cause I get this error:
BC30684: 'DBNull' is a type and cannot be used as an expression.
How can I solve this?
Bye and thanks in advance.
P.S. I would prefer first method to call a stored procedure ('cause I could call it with 'exec sp null' sql command, solving the other problem), but obviusly if it's possible...=)
Sorry for grammatical mistakes.
Hi ,
I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.
i am using the oledb connection
but i am getting the following error
[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
i tried with ado.net connection by directly giving the parameter names.
it will create a table but the the table name is something different from what i specified
Please do help as soon as possible
Thanks
Manish
[Microsoft follow-up]
dtexec.exe allows us to pass values into a package using /SET and a property path. Why can't we do the same using the Execute Package Task?
And yes, I know about Parent Package Configurations, I use them alot. But I would still like the ability to pass values in.
-Jamie
Hi
Can anyone help me in for the following.
i want to execute a exe file with two variable parameters
Executable : C: empMyExe.exe
Parameter1 : User::Category type is string (below example A)
Parameter2 : User::Amount type is string (below example 1)
in dos it looks like this
c: empMyExe A 1
This will executes fine.
Thanks,
Madhu
Hi,
I'm very new to SSIS and I€™m trying to do the following in a SQL task
RESTORE DATABASE @DatabaseName FROM DISK = @Backup WITH FILE = 1, MOVE @OldMDFName TO @NewMDFPath, MOVE @OldLDFName TO @NewLDFPath, NOUNLOAD, REPLACE, STATS = 10
I'm using an OLE DB connection and I have mapped user variables to the various parameter names. Unfortunately when i test the above command it fails on must declare the scalar variable "@DatabaseName". How can i get my values to be substituted into the command?
Many thanks
Martin
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
When I use the following execute statement where I am "Hard Coding" in the parameters, the stored procedure runs successfully and it places the data into the table per the stored procedure.
SQLStatement: dbo.sp_ml_location_load @system_cd='03', @location_type_cd=Store;
However, the @system_cd parameter can change, so I wanted to set these parameters up as variables and use the parameter mapping in the Execute SQL Task.
I have set this up as follows and it runs the package successfully but it does not put the data into the table. The only thing I can figure is either I have the variables set up incorrectly or the parameter mapping set up incorrectly.
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
Here is my set up, what is wrong here:
I Created these Variables:
Name Scope Data Type Value
system_cd Locations String '03'
location_type_cd Locations String Store
I added these parameter mappings in the Execute SQL Task
Variable Name Direction Data TypeParameter NameParameter Size
User::system_cd Input NVARCHAR@system_cd -1
User::location_type_cd Input NVARCHAR@location_type_cd -1
I used this SQLStatement: EXEC dbo.sp_ml_location_load ?,
It runs the package successfully but it does not put the data into the table.
Good day everyone,
I have a question concerning the Execute SQL task.
Problem Statement:
I have a table containing the following sample data.
Catalog_ID, Product_ID, IsBlocked
56789, 1, 0
56789, 3, 1
23567, 1, 0
23567, 2, 1
The data types of the fields are:
Catalog_ID: bigint
Product_ID: bigint
IsBlocked: bit
I have two variables called "old_catalog_id" and "new_catalog_id" with the following values:
old_catalog_id: 56789
new_catalog_id: 11111
Now, I would like to select all the recods, whose Catalog_ID fields equals the value in the variable "old_catalog_id" and insert identical recods with the "new_catalog_id" value.
The result of that operation on my sample records is:
Catalog_ID, Product_ID, IsBlocked
56789, 1, 0
56789, 3, 1
23567, 1, 0
23567, 2, 1
11111, 1, 0
11111, 3, 1
blue: selected fields
green: inserted fields
My Solution:
In order to realize this solution, I have created the following tasks on the Control Flow.
1. Create an Execute SQL Task for the selection. (Name: Selection Task)
2. Create a For-Each-Loop for iterating on the result set. (Name: Loop on results Container)
3. Create an Execute SQL Task inside the For-Each-Loop container for inserting the new records. (Name: Insertion Task)
Configurations and Problems:
1. Selection Task:
General Tab:
Result Set: Full Result Set
SQL Statement:
select Product_ID, IsBlocked
from MyTable
where Catalog_ID = ?
Parameter Mapping Tab:
Variable Name -- Direction -- Data Type -- Parameter Name
User:: old_catalog_version -- Input -- Large_Integer -- 0
Result Set Tab:
Result Name -- Varibale Name
0 -- User::FullResultSet (which has the Data Type: Object)
When I execute this task, I get no records.
Thus, I have hard-coded the value of Catalog_ID in the Sql Statement parameter. Now, I get the correct 2 records in the result set.
Question 1: What am I doing wrong in the Parameter Mapping?
2. Loop on results Container:
Collection Tab:
Enumerator: Foreach ADO Enumerator
ADO object source variable: User::FullResultSet
Enumeration mode: Rows in the first table
Variable Mappings Tab:
Variable -- Index
User:: old_prod_id -- 0 (Data Type of "old_prod_id" is Int64)
User:: old_isBlocked -- 1 (Data Type of "old_isBlocked" is Boolean)
When I execute the package, it fails with the following error message:
Error: 0xC001F009 at SQL Tasks: The type of the value being assigned to variable "User:: prod_id" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Thus, I have changed the data type of the variable "old_prod_id" to Object. Now, the package runs successfully.
Question 2: Why isn't the package accepting "Int64" as the data type of my variable, although the corresponding DB field has the type "bigint"?
3. Insertion Task:
General Tab:
Result Set: None
SQL Statement:
insert into MyTable
(Catalog_ID, Product_ID, IsBlocked)
values (?, ?, ?)
Parameter Mapping Tab:
Variable Name -- Direction -- Data Type -- Parameter Name
User::new_catalog_version -- Input -- Large_Integer -- 0
User:: old_prod_id -- Input -- Large_Integer -- 1
User:: old_isBlocked -- Input -- Variant_Bool -- 2
When I execute this task, it fails with the following error message:
Error: 0x0 at Insertion Task: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Catalog2Context_CATALOGS". The conflict occurred in database "XS_EC_CCH_PEGXSAP2", table "eSearch4.CATALOGS", column 'ID'.
Well, the message implicitly states that the value of the variable "new_catalog_version" has violated the mentioned FOREIGN KEY constraint. But I have set a breakpoint and I saw that the value was set correctly. So, it seems that the Execute SQL Task is not able to read the value of the variable correctly.
Question 3: What am I doing wrong in the Parameter Mapping, which causes the task not being able to read the value of the variables correctly?
Thanks in advance for your help.
Regards,
Samar
I currently have a process that has a cursor. It takes data and executes a stored procedure with parameters.
declare @tmpmsg varchar(max)
declare @tmpmsgprefix varchar(max)
declare @cms varchar(20)
create table #tmpIntegrity(matternum varchar(10),ClientName varchar(20))
insert into #tmpIntegrity(matternum,ClientName)
[Code] ....
Output from code:
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4,
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Desired output (no trailing comma):
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Next, how do I call the stored procedure without doing it RBAR? Is that possible?
execute usp_IMessage 832,101,@tmpmsgprefix,@tmpmsg,','
Got a powershell script to split a large XML file to split in smaller chunks. I have Execute ProcessTask in SSIS with:Â
Executable: %windir%system32WindowsPowerShellv1.0powershell.exe
argument:Â -ExecutionPolicy ByPass -command ". 'C:WorkspacesSplitToytPMFile.ps1'"
I need to pass File Name as parameter to the PS script. I tried using the StandardInputVariable but it doesn't work.Â
I have created a job to execute a SSIS package located in the SSIS Package Store. When starting the job I receive an error. The history log reports:
View 12 Replies View RelatedHi Everyone,
I haven't been able to successfully use the ADO.NET connection type to use both input and output parameters in an execute sql task containing just tsql statements (no stored procedure calls). I have successfully used input parameters on their own but when i combine it with output parameters it fails on the simplest of tasks.
I would really find it beneficial if you could use the flexibility of an ADO.NET connection type as the parameter marker and parameter name can be referenced anywhere throughout the sql statement in no particular order. The addition of an output parameter would really make it great!!
Thanks
Hi,
I have an app in C# that executes a query using SQLCommand and parameters and is taking too much time to execute.
I open a SQLProfiler and this is what I have :
exec sp_executesql N' SELECT TranDateTime ... WHERE CustomerId = @CustomerId',
N'@CustomerId nvarchar(4000)', @CustomerId = N'11111
I ran the same query directly from Query Analyzer and take the same amount of time to execute (about 8 seconds)
I decided to take the parameters out and concatenate the value and it takes less than 2 second to execute.
Here it comes the first question...
Why does using parameters takes way too much time more than not using parameters?
Then, I decided to move the query to a Stored Procedure and it executes in a snap too.
The only problem I have using a SP is that the query can receive more than 1 parameter and up to 5 parameters, which is easy to build in the application but not in the SP
I usually do it something like
(@CustomerId is null or CustomerId = @CustomerId) but it generate a table scan and with a table with a few mills of records is not a good idea to have such scan.
Is there a way to handle "dynamic parameters" in a efficient way???
There is one SP with parameters varchar, int, varchar and int. It runs perfect in SSMS. Now, I've moved into a Execute SQL task with four IN parameters. In parameter mapping, data type is varchar, long, varchar, long and parameter name is 0,1,2,3. It worked before which is great. Today, I opened this pkg for another testing but failed with the following error:failed with the following error: "Incorrect syntax near ';'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,parameters not set correctly, or connection not established correctly.
I know SP is fine as tested in SSMS.  I could not understand where it could go wrong in the ssis package. Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
Hi there. I have occasional sincronization error.-XSUBSYSTEM Merge
-XSERVER MYSERVER
-XCMDLINE 0
-XCancelEventHandle 000006E0
2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01'
2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01'
2006-12-22 14:55:02.974 Initializing
2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01'
2006-12-22 14:55:06.005 Retrieving publication information
2006-12-22 14:55:06.130 Retrieving subscription information.
2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric.
2006-12-22 15:00:07.800 Category:SQLSERVER
Source: Subscriber01
Number: 8114
Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
Hi,
I want to log/watch the query executed by the "Execute query Task". It's a query with different variables, the different variables i can see in one of the debug windows and these looks OK, but the query doesn't do what's expected. So i want to see the whole query, is that possible?
Query logging on the database server isn't an option. The server is an oracle server and the dba doesn't want to change this setting.
Thanks,
Dennis
NOTE: I am using Brian Larsons book Delivering Business Intelligence with SQL Server 2005. I am stuck on page 588 - step 20. I am using Windows Vista Ultimate
Once all the Dimensions & attributes I have selected are dragged into the query area in MDX query builder no data is displayed. There is a message: "No rows found. Click to execute the query." - clicking does nothing.
How can I resolve this problem ???
Hi all,
I need some help.... I cannot execute any query from sql 2005, when I try to execute a query it stays executing and I never receive any result set. I uninstalled and re installed again SQL 2005 in my computer and also I installed the Service Pack and I am still getting the same. Could you please help me or advice on this situation?
Thanks in advance,
Mauricio.
I want to execute a query for each row in a report since a parameter in that query relies on a field in the row. Is there a way to do this?
View 1 Replies View Related