How Can I Get A List Of The Last Payments
Apr 21, 2008How can I get a list of the last payment for each client?
SELECT ClientID,PaymentDate,PaymentAmount FROM tblClients INNER JOIN tblPayments ON tblPayments.ClientID = tblClients.ClientID
ADVERTISEMENT
Many Year Payments
Jan 16, 2004I need to create a stored procedure that will show all clients that have made payments every year for a number of years (3) or (5). My tables are simple but I have no clue how to ask the SQL question, mostly because it is each and every year.
tblClients ClientID (pk)
tblOrders OrderID (pk) ClientID (fk)
tblOrderPayments PaymentID (pk) OrderID (fk)
Thanks for any help,
How Can I Get My Code To Look For Partial Payments
Apr 12, 2008The following code accepts a couple of parameters and creates a temp table to hold unpaid schedule rows (like invoices). Then is takes the payment amount passed and starts paying the oldest ones first, until it runs out of money or pays a partial. When it pays it inserts a row in the applieds table with the schedule_ID, Receipt_ID (payment id), applied amount, and applied date.
What I need help with is: Say there is a partial payment from a previous payment, I need to pay that one, but only the unpaid part. Then continue to pay other schedule rows...
I appreciate any help,
@PaymentAmount money,@PledgeID Int,@Receipt_ID IntAS-- Get unpaid reminder rows for the passed in pledge id and put them into the temp tableDeclare @temp_oldest Table(PledgeSchedule_ID int,ReminderDueDate datetime,AmountDue money)INSERT INTO @temp_oldest SELECT PledgeSchedule_ID, PledgeDueDate, AmountDueFROM tblPledgeReminderScheduleWHERE (dbo.tblPledgeReminderSchedule.Pledge_ID=@PledgeID) AND (dbo.tblPledgeReminderSchedule.ReceivedDate IS NULL) -- AND (dbo.tblPledgeReminderSchedule.PledgeDueDate < GETDATE())WHILE((SELECT Count(*) FROM @temp_oldest)>0)BEGIN-- If the payment is greater or equal to the amount due for the current row, do thisIF(@PaymentAmount >= (SELECT Top 1 AmountDue FROM @temp_oldest))BEGIN-- Update the reminder row with todays dateUPDATE tblPledgeReminderSchedule SET ReceivedDate = GETDATE()WHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest)-- Insert a row to track applied payment and reminder row associatedINSERT INTO tblPledgeReminderSchedule_Applieds (PledgeSchedule_ID,Receipt_ID,Applied_Amount,Applied_Date)(SELECT Top 1 PledgeSchedule_ID,@Receipt_ID,AmountDue,GETDATE() FROM @temp_oldestWHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest))-- Subtract the amountdue from the paymentamount and reset itSET @PaymentAmount = (@PaymentAmount - (SELECT Top 1 AmountDue FROM @temp_oldest))ENDELSEIF(@PaymentAmount < (SELECT Top 1 AmountDue FROM @temp_oldest))BEGIN -- Insert a row to track applied PARTIAL payment and reminder row associatedINSERT INTO tblPledgeReminderSchedule_Applieds (PledgeSchedule_ID,Receipt_ID,Applied_Amount,Applied_Date)(SELECT Top 1 PledgeSchedule_ID,@Receipt_ID,@PaymentAmount,GETDATE() FROM @temp_oldestWHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest))BREAKENDELSEIF @PaymentAmount = 0-- Delete all rows from temp tableDELETE FROM @temp_oldestELSE-- Delete only the current row from the temo tableprint @PaymentAmountDELETE FROM @temp_oldest WHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest)END
Help With Udf Or Where Cluase To Get Quarterly/annual Due Payments
Jan 9, 2008I'm trying to build a where clause that looks at two columns to determine if QUARTERLY and ANNUAL payments are due.
rec_day could be any day.
I got the monthly one pretty easily:
WHERE rec_start <= GETDATE() AND rec_frequency = 'Monthly' AND rec_day = DAY(GETDATE())
So if the rec_day was 9 and the rec_frequency was 'Quarterly' then I would be looking to see if todays date is 1/9 or 4/9 or 7/9 or 10/9 (not sure how I do this part)
I'm pretty much stuck on where to go with the quarterly where clause:
WHERE rec_start <= GETDATE() AND rec_frequency = 'Quarterly' AND rec_day = ????
I tried the following, but it did not work:
(CAST(DATEPART(Q, GETDATE()) * 3 - 2 AS VARCHAR(2)) + '/' + CAST(rec_day AS VARCHAR(2)) + '/' + CAST(YEAR(GETDATE()) AS VARCHAR(4)) = GETDATE())
Transact SQL :: Picking Up Average Last Two Payments
May 18, 2015Got a table named Payments in the following form:
Report_DateCustomer_IDCustomer_NamePayment_DatePayment_Amount
The Customers Table have the fields:
Customer_IDCustomer_Name
Since the Customers Table contains the complete list of customers I seek to have a Join made between it and the Paymentstable to check the amount made by the customers.
However, the trouble arises when I seek to check the average amounts made by each customer during last two months in which such a customer had paid.
In further clarification, lets consider current month of May 2015 going on;
Customer_A had paid $10,000 in AprilCustomer_A had paid $5,000 in AprilCustomer_B had paid $10,000 in AprilCustomer_A had paid $18,000 in MarchCustomer_A had paid $2,000 in MarchCustomer_A had paid $10,000 in FebruaryCustomer_B had paid $8,000 in FebruaryCustomer_B had paid $4,000 in FebruaryCustomer_B had paid $3,000 in February...
Count Quantity Of Payments With 20000 Step
Jan 17, 2014My need is to count the quantity of payments with 20000 step. This is my Oracle code. I'm in process of moving from Oracle to SQL Server. How to rewrite this code for SQL Server.
WITH got_grps AS
(
SELECT TRUNC (sys_creation_date) AS date_creation
, ( 1
+ FLOOR ( NVL (amount_original, 0)
/ 20000
[Code] ......
Count Quantity Of Payments With 20000 Step
Jan 17, 2014My need is to count the quantity of payments with 20000 step.
This is my Oracle code. I'm in process of moving from Oracle to SQL Server. How to rewrite this code for SQL Server.
WITH got_grps AS
(
SELECT TRUNC (sys_creation_date) AS date_creation
, ( 1
+ FLOOR ( NVL (amount_original, 0)
[Code] ....
SQL 2012 :: List All Different Values That Go With Single CAS ID To Appear As Comma Separate List
Jun 15, 2015So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
Report Designer: Need To List Fields From Multiple Result Rows As Comma Seperated List (like A JOIN On Parameters)
Apr 9, 2008
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
Insert Value List Doest Not Match Column List
Apr 18, 2007HI...
I need to do a simple task but it's difficult to a newbie on ssis..
i have two tables...
first one has an identity column and the second has fk to the first...
to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!
i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"
here is the script
INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)
what's the problem ??
Items In List A That Don't Appear In List B (was Simple Query...I Think)
Jan 20, 2005Ok, I want to write a stored procedure / query that says the following:
Code:
If any of the items in list 'A' also appear in list 'B' --return false
If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF
(SELECT values FROM tableA) IN(SELECT values FROM tableB)
Return False
ELSE
Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
Can anyone help?
Select List Contains More Items Than Insert List
Mar 21, 2008I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns."
How can I do this?
Insert Query:
insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE)
SELECT DISTINCT
tri_IDENT.IDA AS PPID,
tri_Ldg_Tran.CLM_ID AS PTicketNum,
tri_ClaimChg.Line_No AS PLineNum,
tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT'
THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier
ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate,
tri_Ldg_Tran.Tran_Date AS PEntryDate,
tri_ClaimChg.Hsp_Code AS PHCPCCode,
tri_Ldg_Tran.Adj_Type,
tri_Ldg_Tran.PRS_ID,
tri_Ldg_Tran.Create_Time,
tri_Ldg_Tran.Adj_Group,
tri_Ldg_Tran.Payer_ID,
tri_Ldg_Tran.TRN_ID,
tri_ClaimChg.Primary_Claim,
tri_IDENT.Version
FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN
qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc =
qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN
tri_Ldg_Tran RIGHT OUTER JOIN
tri_IDENT LEFT OUTER JOIN
tri_ClaimChg ON tri_IDENT.Pat_Id1 =
tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID =
tri_ClaimChg.PRS_ID AND
tri_Ldg_Tran.Chg_TRN_ID =
tri_ClaimChg.Chg_TRN_ID
AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN
tri_Payer ON tri_Ldg_Tran.Payer_ID
= tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type
= tri_Ldg_Tran.Pay_Type AND
qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type
WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg')
AND (tln_PaymentTypeMappings.PTMClientCode = 'SR')
AND (tri_ClaimChg.Primary_Claim = 1)
AND (tri_IDENT.Version = 0)
Insert Only New Items From A List But Get ID's For New And Existing In The List.
Feb 12, 2008Hi,
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2
Windows Server 2003
1GB Ram....(I know, I know)
TIA
Code Snippet
GO
CREATE TABLE [dbo].[Tokens](
[TokenID] [int] IDENTITY(1,1) NOT NULL,
[Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED
(
[TokenID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens]
(
[Token] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
CREATE FUNCTION [dbo].[SplitTokenList]
(
@TokenList varchar(max)
)
RETURNS
@ParsedList table
(
Token varchar(255)
)
AS
BEGIN
DECLARE @Token varchar(50), @Pos int
SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ','
SET @Pos = CHARINDEX(',', @TokenList , 1)
IF REPLACE(@TokenList , ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1)))
IF @Token <> ''
BEGIN
INSERT INTO @ParsedList (Token)
VALUES (@Token) --Use Appropriate conversion
END
SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos)
SET @Pos = CHARINDEX(',', @TokenList, 1)
END
END
RETURN
END
GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList]
@TokenList varchar(max)
AS
BEGIN
SET NOCOUNT ON;
create table #Tokens (TokenID int default 0, Token varchar(50))
create clustered index Tind on #T (Token)
DECLARE @NewTokens table
(
TokenID int default 0,
Token varchar(50)
)
--Split ID's into a table
INSERT INTO #Tokens(Token)
SELECT Token FROM SplitTokenList(@TokenList)
BEGIN TRY
BEGIN TRANSACTION
--get ID's for any existing tokens
UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0)
FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token)
OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens
SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old
SELECT TokenID, Token FROM #Tokens
WHERE TokenID <> 0
UNION
SELECT TokenID, Token FROM @Tokens
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @er nvarchar(max)
SET @er = ERROR_MESSAGE();
RAISERROR(@er, 14,1);
ROLLBACK TRAN
END CATCH;
END
GO
ERROR: A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List.
May 22, 2006Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List
May 10, 2006Hi All,
I have seen a few other people have this error.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
SELECT WHERE (any Value In Comma Delimited List) IN (comma Delimited List)
Jul 2, 2005I want to allow visitors to filter a list of events to show only those belonging to categories selected from a checklist.
Here is an approach I am trying:
TABLE Events(EventID int, Categories varchar(200))
EventID Catetories
--------------------------
1 ‘6,8,9’
2 ‘2,3’
PROCEDURE ListFilteredEvents
@FilterList varchar(200) -- contains ‘3,5’
AS
SELECT EventID FROM Events
WHERE (any value in Categories) IN @FilterList
Result:
EventID
----------
2
How can I select all records where any value in the Categories column
matches a value in @FilterList. In this example, record 2 would be
selected since it belongs to category 3, which is also in @FilterList.
I’ve looked at the table of numbers approach, which works when
selecting records where a column value is in the parameter list, but I
can’t see how to make this work when the column itself also contains a
comma delimited list.
Can someone suggest an approach?
Any examples would be greatly appreciated!
Gary
List() UDF
Jan 3, 2003Amol writes "I wish to write a UDF that will concatenate values from each row of a column for a select query. for each invocation of the UDF it should check the callee query to see if its the next row of the current query and concatenate the value or if its a new query start from null.
eg. : select list(name) from employee
will return a "single" list of all names in the employee table as a comma delimited string.
TIA, Amol."
Run Down A List In SQL
Nov 21, 2006I have tilted and need some help.
I have a table with columns:
ArtNo, WareNo, State + a few others
Sample data:
111, 1, 3
111, 2, null
111, 4, 10
222, 1, 8
222, 2, 3
222, 1, 3
and so on
Each artNo is in several WareNo and has a state
Each WareNo has several ArtNo
I want to run through the table and get * for each combination of ArtNo&WareNo that does not have any post in the table with State = 3.
Best regards
Inno
List In List?
Jul 2, 2007Hello everybody,
I am new to the whole reporting World and I was wondering if their is a solution for my problem. I searched for one and a half hour and I am getting desperate.
I need to repeat a report. So I thought: I can use a list for that. But when I placed all my objects in that list and linked it to a data source it gives an error at every object. I had this problem before and I made a work around so I did not solve it. I need a list in a list or a matrix in a list. I get the following errors:
Error 1 [rsDataRegionInDetailList] The list €˜list3€™ is in a list that has no group expressions defined for it. To use a data region in a list, the list must have group expressions. c:projectencitrix estcitrixusagedb
eportCitrixUsage.rdl 0 0
Error 2 [rsFieldReference] The Value expression for the textbox €˜textbox16€™ refers to the field €˜USERNAME€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope. c:projectencitrix estcitrixusagedb
eportCitrixUsage.rdl 0 0
I hope you can help me, thanks in advance!
Yours,
Stef
Select Where 'in' A List
Aug 3, 2007I have done queries before where you have something like this:
Select name
From people
Where uid in (Select UID from employees where salary > 500000)
as an example.
I have to use stored procedures, I can't connect directly...
I have a datatable of records that I select from a database. In the database table there is a flag 'checkedOut' (bit field) wich I want to set to true (1) for each of these records.
Since I have to use stored procedures I think I am limited to passing in parameters. I wrote a function using a stringbuilder to concatonate the key fields into a comma delimited list "1, 55, 98" etc. and thought to use it as the clause in the 'in' sample ie:Update ServiceRequests set
CheckedOut = 1
Where UID in (@UIDList)
I have tried a few different things, none works.
Any ideas how you might accomplish this with stored procedures?
The records are passed to a thread to be dealt with and it's possible the next time it runs it will pick up the same records for processing if the first thread isn't through. I needed the 'CheckedOut' to ensure I don't accidentally do that.
Thanks.
List Of Countries
Feb 5, 2008Hello All,
I need to download the table containing the list of the database in sql server 2005, where can this be downloaded
thankx
Bibek
Matching On From A List
Jan 15, 2004HI,
say I have a list from an sql statement (results list)
this list contains 10 items
In another table, in one particular column - there is a match for one of these items from the initial list.
SO... this may be the list
_____________________
itemnumber
1
2
3
4
5
6
7
8
9
10
------------------------------
in the other table there is a match...
but just for one item on that list.
____________________
othertablefield
11
13
14
3 <------ match
99
78
----------------------------
How do I find that match with my sql statement?
How Do I Get A List Of Tables In T-SQL
Mar 11, 2005Hi,
Is there anything equivalent to Oracle's Select * from tab in MS SQL.
Please Help Me About List Of Table
Dec 14, 2005i need to give list all table in my database plaese give me qurity?
thanks a lot
How I Can Get List Of Tables?
Dec 24, 2005Hi friends,
How I can get list of tables and list of fields within those tables in SQL server.
Thnak a lot.
List Of Tables
Jun 6, 2001How to obtain the list of the tables of a base by un script
View 1 Replies View RelatedList Function
Aug 8, 2000Converting Sybase to SQL Server !
On the Sql Server's database I did :
-- test list function with cursor
alter proc proc_list(@key varchar(255), @retlistvalues varchar(8000) output)
as
declare @incrcurs2 cursor
declare @value varchar(255)
declare @listvalues varchar(8000)
set @incrcurs2 = cursor scroll dynamic
for
select t.title_Id from publishers p, titles t where p.pub_id = t.pub_idand p.pub_id = @key
order by t.pub_id
open @incrcurs2
fetch next from @incrcurs2 into @value
select @listvalues = convert(varchar(255),@value)
WHILE @@FETCH_STATUS = 0
begin
select @listvalues = @listvalues + ',' + convert(varchar(255),@value)
fetch next from @incrcurs2 into @value
end
CLOSE @incrcurs2
DEALLOCATE @incrcurs2
select @retlistvalues = @listvalues
go
declare @listvalues varchar(8000)
execute proc_list '1389',@listvalues output
print @listvalues
With Sybase, easily :
Select t.pub_id, list(t.title_Id) from publishers p, titles t where p.pub_id = t.pub_id
And I 've got all the titles in a comma-separated string by publisher !!!!
So, with SQL Server, I suppose that if I want the result by publisher, I must imbricate two cursors !!!
Perhaps I dream
Or can somebody see a better solution ????
Thanks
Axel Thimonier
Scrollable List
Mar 4, 2000How can I implement List on client which represent some SQL query with ability search through this list.
i.e. can I somehow get searched record and records near it (in different sort context) e.g. prev 10 and next 10?
List Function
Nov 21, 1999I've recently read in Joe Celko's "SQL For Smarties" book that there is a LIST() function in Sybase's SQL Anywhere that will aggregate string data into a single comma separated column.
Unfortunately, this command is not supported in T-SQL. Does anyone know how to achieve a similar result with conventional SQL, where I want to aggregate string data into a single column.
Here's my task. Say I have two tables, tParents and tChildren, a parent has many children. I want a sql statement that returns one row for each parent and the multiple children associated to each in a single comma separated column, i.e
Joe Blow 'Child1, Child2, ...'
Parent2 'Child4, Child5, ...'
The SQL with this LIST() function would look like:
Select Parent, List(tChildren.Child) as Children
From tParents, tChildren
Where tParents.PID = tChildren.CID
Group By Parent
Thanks in advance for any help.
Cheers,
Steve Roch
Research Systems, Inc.
stever@rsinc.com
Permissions List
Aug 31, 2000I need to print a list of permissions granted for each Role, can someone tell me how to request the information using query analyzer?
View 1 Replies View RelatedHdo I List All Possible Variations????
May 31, 2003I'm having a db programming drama. We have a series of questionnaires;
each questionnaire is comprised of a series of forms that a user must
fill out. A document is produced at the end of the questionnaire. Some
of the fields are required and some are not, depending on how the
fields are filled out can make the document look very different.
My aim is to produce something that lists all the possibilities that
the question can be filled out in. The list of the form fields are in
a SQL Server 200 database table "tblDocPageFields", the structure of
the table is similar to this:
tblDocPageFields
- ID
- Page ID
- Field Name
- Field Order
Another table specifies whether the field is required or not which
contains the fieldID and a validation Message to be displayed if the
field is not filled in.
tblDocPageFieldsReq
- ID
- FieldID
- ValidationText
For example if I have a document with 2 fields and the first one of
them are required the possibilities are:
Field1 Field2
Filled Nothing
Filled Filled
NothingFilled
I need to be able to list this somehow, as some of the surveys have a
huge amount of questions that need to be checked for all
possibilities. Does any one have any idea How I can accomplish this
through a stored procedure or ASP logic or something… Please help!!!
ryan@lawcentral.com.au
How To Get A List Of Tables Currently In A DB
Mar 21, 2001Hi all,
Does any one know what command(s) I can use from a SQL prompt to tell me what tables are cruuently residing in a particular database. I'm looking for something along the lines of "select list_of_all_tables from tempdb", which can be applied to any valid db on the system.
Thanks in advance for any guidance.
Rgds,
Kevin
SQL Errors List.
Jan 29, 1999Hi guys.
Please help me.
Where can I find the list of all SQL errors with discriptions of them.
Alona F.