How Can I Jump Out Of An Iteration When Using A Cursor?
Jan 24, 2008Is there a key word one can use to immediately jump out of an iteration when using a cursor, and move to the next record using 'fetch next' cursor?
View 1 Replies
ADVERTISEMENT
EXEC Inside A Cursor Iteration Problem
Jul 20, 2005I 've have a stored procedure that compares fields across databases.In order to do so it requires 2 values it acquires from 2 tables. Thesearch is based on the ID of the data owner and a subject:proc_evaluate_results @StudentId = '222222', Course = 'PSY101'In order to obtain those values I run a cursor accross my records andSELECT THEM INTO 2 @variables, which then replace 222222 and PSY101with dynamic values eg.--define a cursor etc.etc.WHILE @@cursor_fetch = 0BEGIN--do the cursor call INTO @varsEXEC proc_evaluate_results @StudentId = @studentID, @Course =@CourseCodeENDNow,the vars are being passed to the stored procedure and executed OK,but the cursor gets stuck on the last record and continues to evaluateit until stopped manually.If I comment out the EXEC and replace it with eg. PRINT @Course + ' |' + @CourseCode it runs fine, exiting after the last record.ThanksR>
View 6 Replies View RelatedNavigate To:Jump To Url Then Jump To Url Again!
Apr 17, 2007I am stuck on this and its happening no matter what I do. I have a huge project that holds tons of reports. Most are sub-reports.
I have 5 sections I will just use one for example
communictions (totals)
jump to report - summary data
Jump to report - detail data.
The when I get to the detail data I always get the error:
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried to do all sorts of things and no matter what I do I cant get it to work.
This is a web application using the ReportViewer for the web, SQL Server 2005 SP2
I have searched high and low for an answer to this and nothing works, not even the get instead of the post.
Any ideas on how I can get this to work?
Thanks
Stokh
Using Jump To Report Navigation Option- Jump To The Same Report
Apr 28, 2008
I have a report that uses report parameters and navigation in the textbox.
When I click in the textbox, it jumps to the same report, but I cannot see the report parameters any more(hidden ). I cannot change the report parameters.
When I use only the report paramenters (no navigation option), they appear always during the run time.
How can I do to keep the report parameters visible all the time using "jump to the same report"??
Thank you so much. indyw
Iteration In SQL
Apr 15, 2005I have an application that needs to create invoices on a daily basis to multiple clients based on orders shipped that day. This is easy to do on the front-end. But how can I do this on the back end in SQL Server.
I want to sort orders by Client ID and put all orders belonging to one customer on one invoice. When customer id changes, I change the Invoice ID. Is this possible in SQL?
Xcog
Stored Procedure - Iteration
May 18, 2007Hi there,
I need to create a stored procedure that I can pass in an arbitrarily long list of record IDs and have an SQL statement executed for each one.
For instance, I want to be able to pass in 1, 2, 5, 78, 100, 216 and have it automatically execute:
UPDATE table SET value='blah' WHERE id=1; UPDATE table SET value='blah' WHERE id=2; UPDATE table SET value='blah' WHERE id=5; UPDATE table SET value='blah' WHERE id=78; UPDATE table SET value='blah' WHERE id=100; UPDATE table SET value='blah' WHERE id=216
Can anyone please show me how I would structure a stored procedure like this? Specifically, how would I pass the list of IDs in as a parameter, and how would I iterate through them.
Much appreciated!!
Iteration Within Stored Procedure
Feb 16, 2006A Stored Procedure inserts a record in a base table. I want to add n records (n=1 to 5) into a related table. Another SP (tdAuthorityInsert) is already set up to insert one record into the related table.
So, two questions
1. What is the form of an iterative loop in a Stored Procedure?
2. How do you call a Stored Procedure from inside another?
Thanks, td
Updating Based On A Select Iteration
Jan 8, 2001Okay I'm going nuts.
I have a table with a max key value in it, and another table with a few rows in it. I'm trying to update the two new rows with key values that are iterative from the MAX value in the first table. Could anyone point me to some good LOOP...UPDATE, etc resources or pointers before I go postal?
::grins::
Example: first table has a key field, last value in it is say 1000. The second table has two records. They need keys too, and those keys need to start at the last value in the first table + 1, so 1001, and end on the last row of the second table, or, say 1002. I cannot figure out how to read the last value of the first table, and create an update loop to iteratively update the key value in the second table based on the max value of the first, and looping based on the number of records in the second, in this case 2.
Arrrg!
~EHunter
Cross Join Iteration Problem...
Feb 5, 2004I am having a mental fart...
I have two tables:
DECLARE @store_options TABLE(store_option_id INT IDENTITY(1,1), store_id INT)
DECLARE @vendor_options TABLE(vendor_option_id INT IDENTITY(1,1), store_option_id INT, item_id INT, vendor_id INT, price NUMERIC(18,4))
I populate the first table with a litst of stores that offer all desired items.
I populate the second table with a list of vendors, the item is, and cost avaiable at each of the stores in the first table.
What I would like is to output all possible the store and vendor combos ordered by combined price.
So, for instance, I have 3 products, A B and C. Store X has A and B by vendor G, and A B and C by vendor H. I want the output to have all iterations of (Store, Product, Vendor, Price) grouped in order of total price. So...
X A G
X B G
X C H
X A G
X B H
X C H
X A H
X B G
X C H
X A H
X B H
X C H
ordered by each group's combined price.
For some reason, I can't get this straight in my head. Must need more coffee.
ForEachLoop Container - How To Force Next Iteration -
Aug 29, 2007How can I force a Next Iteration in a ForEach Loop container?
I am looping through a folder(ForEach Loop Container) looking for a specific File Name ( Child 'Script Task') to evaluate name).
If the current file is not the File Name I need, get the next file, other wise drop down to a Exec Proc task.
Is it possible to force "Next Interation' on the parent container?
Thanks - Covi
Script Component - Column Iteration Within
Apr 6, 2007I have a synchronous script component and have added 5 fields to the output (field1, field2... field5). Can I iterate those fields?
In sudo language, I'd like to do:
Code Snippet
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
dim i as integer = 1
while i < 6
row.field[i] = "somevalue: " + i.ToString
end while
end sub
Somehow, I'd like to be able to do that without specifying each field individually:
row.field1 = "somevalue: " + "1"
row.field2 = "somevalue: " + "2"
...
ForEachLoop Container - How To Force Next Iteration -
Aug 29, 2007How can I force a Next Iteration in a ForEach Loop container?
I am looping through a folder(ForEach Loop Container) looking for a specific File Name ( Child 'Script Task') to evaluate name).
If the current file is not the File Name I need, get the next file, other wise drop down to a Exec Proc task.
Is it possible to force "Next Interation' on the parent container?
Thanks - Covi
How Do I Just Stop A Flow And Then Make It Go Into The Next Iteration?
Aug 22, 2007Hey guys, wonder if you could help.
I have a flow which is within a foreach loop. The first box in the flow is a scrip component which makes some check in a database.
Is there a way to say, inside that script component: 'stop the flow here, don't bother going onto the next box, and go on to the next iteration'?
thanks!
andy
ForEachLoop - Failed Task In It Doesn't Change Back To Green On Next Successful Iteration
Apr 23, 2008How do I change the color of the task icon back to green? I have and FEL with tasks in it that occessionally fail. The error is trapped to allow the container to continue processing. I would like to change the color of the icon back to green on the next successful iteration of a task but I haven't found a way to do it.
View 7 Replies View RelatedTransact SQL :: STATIC Defines A Cursor That Makes Temporary Copy Of Data To Be Used By Cursor
Aug 12, 2015 In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
           for select name, salary from ag
 open ll
            fetch from ll
Â
             while @@FETCH_STATUS=0
              fetch from ll
               update ag set salary=200 where 1=1
Â
  close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
Dynamic Cursor Versus Forward Only Cursor Gives Poor Performance
Jul 20, 2005Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies View RelatedCould Not Complete Cursor Operation Because The Set Options Have Changed Since The Cursor Was Declared.
Sep 20, 2007I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
Jump To URL
May 8, 2007to open a report in a new window
i looked up the following line of code
=window.open('" & Globals!ReportServerUrl & "?" & Globals!ReportFolder & "/" & "myreport" & "&rs:Command=Render&rc:toolbar=true','','width=800,height=600,left=10,top=10,resizable=1,menubar=no,location=no,status=no'),_top"
I do not understand what & Globals!ReportServerUrl & "?" & Globals!ReportFolder & "/" & "myreport" &
this implies.
I have the current report name as
http://houapps277/ReportServer/Pages/ReportViewer.aspx?%2fIMS-Reports%2fCR000648
and I need to jump to
http://houapps277/ReportServer/Pages/ReportViewer.aspx?%2fIMS-Reports%2fCR000699
both reports are in same folder IMS-Reports.
Thanks
Jump To Url
Nov 2, 2006I use the "jump to url" in a report that links out to a page on our company intranet. Our internal users have to use http and an external user needs to be routed to the site w/ https. How can I account for this in a report?
View 3 Replies View RelatedJump To URL ....
Apr 2, 2008
Hi...
I want to add two link(navigation) buttons in SINGLE CELL ... if i click on 1st it should navigate to xyz page and if i click on second then it should navigate to abc page...can u pls help me...
Waiting for ur reply...
Roopesh Babu V
Jump To URL & Javascript
Oct 23, 2007Hi, I am trying to link to a page outside of reporting services from a report. I am using SQL Server 2005 Reporting Services [Standard Edition]. The hyperlink works if it is a straight URL, however, nothing happens if I modify it to use Javascript so I can open the link in a new window. I have found many posts on the web from others indicating it should be really easy, but I can not get the link to recognize ANY Javascript (also tried a basic alert with no luck).
The Javascript I am using is well formatted. I can place it into a test page and it runs fine. I can also RC and View Source on my report, grab the entire link, put it in a test page and it works fine. It just doesn't work from the report - ?
Any ideas?
Thanks in advance,
Francine
Jump To Document Map
May 9, 2008When you use the Jump to Report feature is there a way to also go to a specific document map link?
View 5 Replies View RelatedJump To Report
Feb 1, 2007Hi
I want to use Jump to Report option under Navigation tab.
I have two reports both with Same parameters and parameters are multiple value selectable.
In Jump to Report this is how I set the parameter value.
LeadershipTeamId =Join(Parameters!LeadershipTeamId.Value,", ")
CostCentreId =Join(Parameters!CostCentreId.Value,", ")
CostElementGroupId =Fields!CostElementGroupId.Value
This works fine if I have only one value selected for CostCentre and LeadershipTeam but when I select the multiple value I get the following error.
The value provided for the report parameter 'LeadershipTeamId' is not valid for its type. (rsReportParameterTypeMismatch)
Am I missing anything here?
Any help would be highly appreciated.
Best Regards
Jump To URL Error
Jul 27, 2007I'm trying to put a hyperlink in a field on a report. I've found the action property and set the "Jump To" box with the following:
="http://dveowb01.wbhq.com/UnitsStatusLog/StatusEntry.aspx?Unit=" & Fields!Unit.Value
I'm getting this error message:
The Hyperlink expression for the textbox €˜textbox24€™ refers to the field €˜Unit€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope.
Please help.
Thanks,
Jennifer
Jump To Report
Mar 5, 2007Hi all,
I have created a hyperlink(textbox) with an action property setting of "Jump to report" The report I am jumping to takes 5 parameters. I want to pass 4 of the parameters from the main report and have the user enter the 5th. I have mapped the 4 parameters and in preview mode, everthing works great. In preview mode, the parametrs are passed and the last parameter is left waiting for entry. After deployment, this is not the case. In the deployed state, I simply get an error that parameter #5 is blank. Is there there something I am missing?
regards,
Bill
Join Cursor With Table Outside Of Cursor
Sep 25, 2007part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
Jump To Report In New Window?
May 11, 2007Hi all,
Is it possible to use the "jump to report " action and have the report open in a new window?
regards,
Bill
Jump From Every Point On A Report
Dec 4, 2007Hello.
I have a report with a graph in it.
I want to jump to another url when I'm clicking on my report.
I know how to sat the action for clicking inside the report on one of the data number but I want it to jump when I'm ckicking anywhere on the report.
Is there a way to do so?
Thanks.
Question About Jump To URL Function
May 19, 2006Hi !
When using the Jump to URL function, is it possible to open the URL in a new page instance of doing a redirect?
Thanks !
Jump To Report Navigation
Sep 11, 2007
Can I have a report that is nothing more than a parameter and when the user selects from the list it will jump to another report based on which parameter was selected?
I can create a report with a text box that I can click to jump. I'd like to be able to eliminate the click on text box if possible and jump directly from parameter select pull down box.
Thanks.
Jump To Bookmark In Reports
Aug 17, 2007Hi,
Please tell me how to implement the "Jump to Bookmark" in reports,
I mean to say, i have to move to another area or page in a report.
Please provide a sample for the same.
Thanks and Regards
Altaf Nizamuddin
Hyperlink:Jump To Report
Mar 14, 2008Hi,
I have a report that uses Jump to Report and passes Reportname with parameter. Is
there a way to suppress the parameter value in the URL so the user is unable
to manipulate the parameter and execute the changed URL?
This is what I have so far..
="http://<servername>/ReportServer?/<folder>/<reportname>&<parametername>="+Fields!<fieldname>.Value.tostring
because when reports exported to excel, hyperlink path will be displayed and should not display to the user.
Or can we set Hyperline action dyamically?
Thank you.
RSUser
Jump To Report With Parameters
Dec 7, 2007Hello,
I have a report (Report1) with a subreport (SubReport2). The subreport is a barchart. On the data values for the chart, I have a "Jump to Report" action defined. This jumps to another report(Report3) that has some parameters on it. Neither Report 1 nor SubReport2 have any parameters, only Report3.
When I jump to Report3, I would like to have it open up blank with the parameters open to be selected. I don't want to pass in any parameters as I jump to it. This works perfectly when I test it in my Preview pane in BIDS. However, when I upload the report to the ReportServer, when I click on SubReport2 to jump to Report3, I get an error saying
The 'Months' parameter is missing a value
There is no parameter pane for me to choose the parameters (or any other report viewer pane). However, if I open Report3 directly without trying to use Report1 and SubReport2 to jump to it, the parameter pane is there, everything works right.
Does anyone know how I can get the parameters pane to show up when I jump to Report3?
Thanks,
Andy