How Can I Skip An Initialize Snapshot?
Jun 2, 2006
Hence you have a database which huge tables and a transactional replication (push subscriptions).
Now my question:
1. if I have to initialize a snapshot but I would like to do it without the snapshot agent, what methods are available?
2. Usually the distribution agent will request an initialize snapshot. How can I tell him, that I would like to use an alternative method and that the distribution agent should NOT request a snapshot?
3. Any suggestions about a good practive for materializing huge and big tables wihtout using the disitrbution agent (e.g. "switch off" replication, bcp table out of the primary site and bcp it into the target site, "start" distribution agent so that it doesn't request a snapshot).
Regards
Nobsay
View 6 Replies
ADVERTISEMENT
Feb 1, 2007
Hello all,
I am developing a system using SQL Server replication between SQL Server EXPRESS 2005 clients and SQL Server 2005 servers. I initialize the replica databases with a script, then I do not want to initilize the subscriber with the snapshot; I configure each subscriber to "not initilize", but when I run the first synchronization the snapshot copy process is always is executed.
Maybe am I forgetting something? Can I use this SQL Server EXPRESS - SQL Server replication scheme without initialize the subscribers with the snapshot?
Thaks for reading!
View 5 Replies
View Related
Feb 20, 2006
I am unable to get my snapshot agent to initialize. When I start the "View Snapshot Agent Status" and press the Start button, it appears that the snapshot agent attempts to starts and then it doesn't.
I have configured the a distribution server and need to push a replication to another database, both can connect, etc.
I used the wizard to configure the distributon server and subscription server. I am using AdventureWorks, and am attempting to replicate a single small table.
View 4 Replies
View Related
Nov 16, 2006
I have been trying to set up transactional replication between an OLTP SQL Server 2005 Standard edition server and a BI SQL Server 2005 Enterprise edition server. I am using a pull subscription. I was able to establish the replication from the developement server to the BI server however when I tried setting up the replication between the production environment and the BI server, using the same configuration settings, I ran into a problem. The production server had been renamed after it was initially set up. I used the sp_dropserver and sp_addserver to solve this issue and was able to run the replication wizard. However once the wizard finishes the snapshot agent doesn't initialize the publication. When I look at the replication monitor it has a status of "never run". I try to run it manually and it appears to run for a few seconds then stops and still has the status of "never run". I don't get any error messages and can't find anything in the log. I am wondering if this is related to the server rename? I am hoping to find a soultion that doesn't involve uninstalling SQL Server and reinstalling since this is a production environment.
Thanks.
View 3 Replies
View Related
Feb 20, 2006
I have a pretty big (350 gb) OLTP database that I want to replicate in its entirety. I'm concerned about the impact of taking a snapshot of it (it is processing at some level pretty much 24x7). I know on SQL2005 there is the option to initialize from backup, but unfortunately we won't be on 2005 in time.
I'm thinking of doing something like this:
Set up the distributor, publication, and subscription
Turn off distribution agent
Set the publisher to "sync with backup"
Backup the publisher, full then log
Truncate tables MSrepl_transactions and MSrepl_commands in the distribution db (I don't have any other replication going on)
Turn off "sync with backup"
Restore the full and tran log backups to new subscriber db
Create subscriber stored procs in subscriber
Start up distribution agent
I'm looking for opinions on whether it's worth going this route to avoid taking the snapshot. Data integrity is the number one priority -- if I have to do a snapshot to ensure that, I will do it.
Thanks in advance!
Mike
View 1 Replies
View Related
Jun 13, 2006
We have two SQL Server 2005 production DB at remote sites. Due to network bandwidth issue, we need to replicate these DBs (publishers and distributers) to central corporate SQL 2000 DB (subscriber for backup and possible reporting (and in rare case as a failover server).
We would start out with backup from SQL 2000 db restored on remote SQL 2005 DBs. When we have DB issue on remote 2005 DB, we want to restore it from central corp. 2000 DB backup. Since two DBs are replicating to central DB, we DO NOT want combined db back up data on restored remote 2005 db. We can restore the db and delete unwanted data before we turn on replication from this restored server. So, this is not a problem.
The real problem is how to avoid snapshot replication (during initialization) when we create a transaction replication on this restored server to avoid over writing data on the central subcriber sql 2000 DB???
HELP!!
View 5 Replies
View Related
Jun 20, 2007
Hi
I seem to have a strange problem when applying a snapshot when the tables in the publication have been updated while the snapshot was being generated.
Say for example there is a table called RMAReplacedItem in the publication. When the snapshot starts being applied to the subscriber, a stored procedure called sp_MSins_RMAReplacedItem_msrepl_css gets created that handles an insert if the row already exists (ie it updates the row rather than inserting it). However, after all the data has been loaded into the tables, instead of calling this procedure, it tries to call one called sp_MSins_RMAReplacedIte_msrepl_cssm - it takes the last letter of the table name and adds it to the end of the procedure name.
The worst part is that this causes the application of the snapshot to fail, but it doesnt report what the error is, and instead it just tries applying the snapshot again. The only way i have managed to find which call is failing is to run profiler against the subscriber while the snapshot is being applied and see what errors.
I have run sp_broswereplcmds and the data in there is what is applied to the subscriber - ie the wrong procedure name.
All the servers involved are running sql 2005 service pack 2. The publisher and subscriber were both upgraded from sql 2000, but the distribution server is a fresh install of sql 2005.
View 1 Replies
View Related
Mar 13, 2001
Does any one know, how to skip the first and last row of a text file while importing using DTS.
ThankX in advance.
View 1 Replies
View Related
Oct 21, 2004
Hello:
I have one table and it contains a column named ID Number, and a column named Date. I have a Do While statement that runs a SQL select statement a few times based on the number of records with the same ID Number. During the Do While statement the information is copied into another table and deleted from the old table. After I look at the results, I see that at the second Do While loop, the data was not selected and the Select statement did not run... so the old variable value from varValue is used again... Any reasons on why?
Here is a code snippet of what is going on:
Do While varCount < varRecordCount
conSqlConnect.Open()
cmdSelect = New SqlCommand ("Select * From temp_records_1 where [id number]=@idnumber and date<@date", conSqlConnect)
cmdSelect.Parameters.Add( "@accountnumber", "10000" )
cmdSelect.Parameters.Add( "@date", dtnow )
dtrdatareader = cmdSelect.ExecuteReader()
While dtrdatareader.Read()
If IsDbNull(dtrdatareader("value")) = false Then
varValue = dtrdatareader("value")
End If
End While
dtrdatareader.Close()
conSqlConnect.Close()
'#####The information above is copied to another table here
'#####The record where the information was received is deleted.
varCount = varCount + 1
LoopAny ideas?
View 2 Replies
View Related
Mar 13, 2000
Hello somebody,
I submitted an update query on a table of 80 million rows, in the weekend. When I returned on Monday, the transaction was still running. I thought some thing wrong happened and cancelled the transaction. It was taking long time to rollback the transaction. I recycled the SQL Server assuming it will do faster recovery. Now I realised that anyway it is going to take lot of time. And SQL server is not going to be up till the database is recoverd completely.
Now can any body suggest me any thing to faster this process or skip this process. I dont know how long it is going to take rollback the transaction which ran for more than 70 hours.
Thanx in advance.
View 1 Replies
View Related
Apr 19, 2004
I was attempting to use BCP today via xp_cmdshell. I have never done anything with BCP before, so it was very enlightening. However, I ran across a problem that maybe someone could help explain to me a little more.
I am using the "queryout" option, and when I run it, the error I get is that you "can't skip fields except for on inserts" or something like that.
The reason I was trying to use bcp is the ability to dynamically generate a filename, i.e. filename = 04182004 (the date). Because in the file name argument, I can use a variable. Make sense?
Since I apparently can't ignore fields, I am thinking of taking all of the information I need daily out, and into a seperate table, then I can use the xp_cmdshell to run a bcp that creates a file with the date as a filename, and I won't be ignoring any fields because I have just put the information I need in the new table. Am I making sense? Does this sound like an appropriate thing to do?
View 3 Replies
View Related
Oct 25, 2007
Hello
I am tryung to execute a Store Proc using Execute SQL Task.
I am very aware that if there is any errors occur I have handled it sufficiently.
All I want to do is, when ever there are any errors in teh Store Proc then this Execute SQL task should not fail and it should go for the next Task in teh control flow.
How can I do this?
View 4 Replies
View Related
Apr 23, 2008
Hi,
There is an option in ssis to skip one or more header rows, but there isn't any thing to skip one or more footer rows.
Example:
header bla bla
1;"Joe";24;"New York"
2;"John";54;"Washington"
3;"Phil";36;"San Francisco"
footer bla bla
I skip the first record in the source definition. So I have left 4 records. How do I skip the fourth (last) record? The value contains some statistics so I cann't look for a special value. Is there a way to skip the last record with a script component?
Joost
View 5 Replies
View Related
Jun 20, 2007
Hello,
im using sqldatareader to read my data and whenever time i loop through the reader it starts from second row why is that?
here is my code:while (reader.Read()){hinfo.Name = reader["_name"].ToString();hi.Add(hinfo);}
i look at the database and i have two rows but its reading only the second row, skiping the first row
View 2 Replies
View Related
Jan 10, 2008
Hi, I have the code below. I need to skip the first row in the datatable as it has the headers. This works now, but my gridview gets the header row inserted as a record.Private Shared Sub InsertData(ByVal sourceTable As System.Data.DataTable, ByVal destConnection As SqlConnection) ' old method: Lots of INSERT statements ' first, create the insert command that we will call over and over: destConnection.Open() Using ins As New SqlCommand("INSERT INTO [tblAppointmentDisposition] ([contactdate], [dnbnumber], [prospectname], [businessofficer], [phonemeeting], [followupcalldate2], [phonemeetingappt], [followupcalldate3], [appointmentdate], [appointmentlocation], [appointmentkept], [applicationgenerated], [applicationgenerated2], [applicationgenerated3], [comments], [newaccount], [futureopportunity]) VALUES (@contactdate, @dnbnumber, @prospectname, @businessofficer, @phonemeeting, @followupcalldate2, @phonemeetingappt, @followupcalldate3, @appointmentdate, @appointmentlocation, @appointmentkept, @applicationgenerated, @applicationgenerated2, @applicationgenerated3, @comments, @newaccount, @futureopportunity)", destConnection) ins.CommandType = CommandType.Text ins.Parameters.Add("@contactdate", SqlDbType.Text) ins.Parameters.Add("@dnbnumber", SqlDbType.Text) ins.Parameters.Add("@prospectname", SqlDbType.Text) ins.Parameters.Add("@businessofficer", SqlDbType.NVarChar) ins.Parameters.Add("@phonemeeting", SqlDbType.Text) ins.Parameters.Add("@followupcalldate2", SqlDbType.Text) ins.Parameters.Add("@phonemeetingappt", SqlDbType.Text) ins.Parameters.Add("@followupcalldate3", SqlDbType.Text) ins.Parameters.Add("@appointmentdate", SqlDbType.Text) ins.Parameters.Add("@appointmentlocation", SqlDbType.Text) ins.Parameters.Add("@appointmentkept", SqlDbType.Text) ins.Parameters.Add("@applicationgenerated", SqlDbType.Text) ins.Parameters.Add("@applicationgenerated2", SqlDbType.Text) ins.Parameters.Add("@applicationgenerated3", SqlDbType.Text) ins.Parameters.Add("@comments", SqlDbType.Text) ins.Parameters.Add("@newaccount", SqlDbType.Text) ins.Parameters.Add("@futureopportunity", SqlDbType.Text) ' and now, do the work: For Each r As DataRow In sourceTable.Rows For i As Integer = 0 To 16 ins.Parameters(i).Value = r(i) Next ins.ExecuteNonQuery() 'If System.Threading.Interlocked.Increment(rowscopied) Mod 10000 = 0 Then 'Console.WriteLine("-- copied {0} rows.", rowscopied) 'End If Next End Using destConnection.Close() End Sub
View 3 Replies
View Related
Jan 10, 2008
I have this code. It works, but inserts the header row into the gridview. I need to avoid the first row. Protected Sub excelimport(ByVal dataSrc As SqlDataSource, ByVal fileName As String) Dim intFileNameLength As Integer Dim strFileNamePath As String Dim strFileNameOnly As String Dim strpath As String If Not (uploadfile.PostedFile Is Nothing) Then strFileNamePath = uploadfile.PostedFile.FileName intFileNameLength = InStr(1, StrReverse(strFileNamePath), "") strFileNameOnly = Mid(strFileNamePath, (Len(strFileNamePath) - intFileNameLength) + 2) 'If File.Exists(paths & strFileNameOnly) Then 'lblMessage.Text = "Image of Similar name already Exist,Choose other name" 'Else If uploadfile.PostedFile.ContentLength > 40000 Then lblmessage.Text = "The Size of file is greater than 4 MB" ElseIf strFileNameOnly = "" Then Exit Sub Else 'strfilename = uploadfile.FileName.Substring(0, (InStr(uploadfile.FileName, ".") - 1)) strFileNameOnly = fileName & ".csv" strpath = "/sites/marketing/apps/disposition/content/excel/" '& strFileNameOnly uploadfile.PostedFile.SaveAs(Server.MapPath(strpath) & strFileNameOnly) 'lblmessage.Text = "File Upload Success." 'Session("Img") = strFileNameOnly Dim strConn As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & (Server.MapPath(strpath)) & ";Extended Properties=""Text;HDR=No;FMT=Delimited""" '"Provider=Microsoft.Jet.OLEDB.4.0;" & _ '"Data Source=" & "/" & strFileNameOnly & ";" & _ '"Extended Properties=Excel 8.0;" Dim conn As New OleDb.OleDbConnection(strConn) Dim myData As New OleDbDataAdapter("SELECT * FROM " & strFileNameOnly, conn) Dim myDatatable As New System.Data.DataTable Dim mySqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("BDOConnectionString").ToString()) ''You must use the $ after the object you reference in the spreadsheet myData.Fill(myDatatable) InsertData(myDatatable, mySqlConnection) 'System.IO.File.Delete(Server.MapPath(strpath)) GridView1.DataBind() upload.Visible = False End If End If ' GridView1.DataSource = myDataset.Tables(0).DefaultView ' GridView1.DataBind() End Sub Private Shared Sub InsertData(ByVal sourceTable As System.Data.DataTable, ByVal destConnection As SqlConnection) ' old method: Lots of INSERT statements ' first, create the insert command that we will call over and over: destConnection.Open() Using ins As New SqlCommand("INSERT INTO [tblAppointmentDisposition] ([contactdate], [dnbnumber], [prospectname], [businessofficer], [phonemeeting], [followupcalldate2], [phonemeetingappt], [followupcalldate3], [appointmentdate], [appointmentlocation], [appointmentkept], [applicationgenerated], [applicationgenerated2], [applicationgenerated3], [comments], [newaccount], [futureopportunity]) VALUES (@contactdate, @dnbnumber, @prospectname, @businessofficer, @phonemeeting, @followupcalldate2, @phonemeetingappt, @followupcalldate3, @appointmentdate, @appointmentlocation, @appointmentkept, @applicationgenerated, @applicationgenerated2, @applicationgenerated3, @comments, @newaccount, @futureopportunity)", destConnection) ins.CommandType = CommandType.Text ins.Parameters.Add("@contactdate", SqlDbType.Text) ins.Parameters.Add("@dnbnumber", SqlDbType.Text) ins.Parameters.Add("@prospectname", SqlDbType.Text) ins.Parameters.Add("@businessofficer", SqlDbType.NVarChar) ins.Parameters.Add("@phonemeeting", SqlDbType.Text) ins.Parameters.Add("@followupcalldate2", SqlDbType.Text) ins.Parameters.Add("@phonemeetingappt", SqlDbType.Text) ins.Parameters.Add("@followupcalldate3", SqlDbType.Text) ins.Parameters.Add("@appointmentdate", SqlDbType.Text) ins.Parameters.Add("@appointmentlocation", SqlDbType.Text) ins.Parameters.Add("@appointmentkept", SqlDbType.Text) ins.Parameters.Add("@applicationgenerated", SqlDbType.Text) ins.Parameters.Add("@applicationgenerated2", SqlDbType.Text) ins.Parameters.Add("@applicationgenerated3", SqlDbType.Text) ins.Parameters.Add("@comments", SqlDbType.Text) ins.Parameters.Add("@newaccount", SqlDbType.Text) ins.Parameters.Add("@futureopportunity", SqlDbType.Text) ' and now, do the work: For Each r As DataRow In sourceTable.Rows If sourceTable.Rows.IndexOf(sourceTable.Rows(0)) Then 'do nothing Else For i As Integer = 0 To 16 ins.Parameters(i).Value = r(i) Next ins.ExecuteNonQuery() 'If System.Threading.Interlocked.Increment(rowscopied) Mod 10000 = 0 Then 'Console.WriteLine("-- copied {0} rows.", rowscopied) 'End If End If Next End Using destConnection.Close() End Sub
View 5 Replies
View Related
Sep 20, 2013
I am looking for best practice when passing a parameter to stored procedure that is not needed. For example, sometime the users will want the list to list only by certain state. Other times the user want all states. How can I make the SP to ignore the where clause if users want all states.
CREATE PROCEDURE usp_Example
@State nvarchar(2)
AS
SELECT FirstName,
LastName,
State
FROM SomeTable
WHERE State = @FirstName;
GO
View 1 Replies
View Related
Jul 23, 2005
Hello All,Does the BCP utility enable you to selectively import rows from a flatfile to a table ?For example:The first column in my flat file contains a record type - 1, 2..7I only need to import types 1, 2, & 3Can this be specified in the .fmt file ?Thanks in advancehharry
View 4 Replies
View Related
May 15, 2007
Hi,
How to skip my 12 header rows from XLS input source?
(before the Excel driver reads (by default, 8 rows) in the specified source to guess at the data type of each column.)
thx,
f.sor
View 3 Replies
View Related
May 20, 2008
I am importing a flatfile and cannot seem to deal with an issue that seems quite simple.
The files have a header row with column names and those rows start with '#'
However sometimes this header row will also be present in the middle of the file.
The Source tries to parse this row and fails
Is there any way to tell the flafile source to skip rows that start with a particular character like comment rows?
View 5 Replies
View Related
Jul 24, 2007
Hi All,
I have a excel workbook with many sheets, in each sheet the first row has to be skipped and the second row contains the column information and thereafter are the records.
The Excel Source in SSIS just gives an option: check if the first row has column names.
But the first row for me is junk -- a link to parent or first sheet-- and has to be skipped and the second row has the column info.
How can this be accomplished .... any suggestions would be of great help!!!
Sample:
Main
id
desc
price
date
1
apple
1.0
1/1/1900
2
banana
2.0
1/1/2000
Main in the first row is actually a hyperlink ... once we click this it takes us to the first sheet in the workbook which has all sheet names as contents.
I am stuck and not sure how to skip this!!
View 5 Replies
View Related
Feb 7, 2006
OK. We know there is Header rows to skip options and it works great.
I've got the file that has a "footer". Here is an example:
.
PSC
filename=table1
records=0000000000525
ldbname=db1
timestamp=2006/02/07-16:25:00
numformat=44,46
dateformat=mdy-1910
map=NO-MAP
cpstream=ISO8859-1
.
0000260611
It's ALWAYS last 12 rows.
Is there a way to split at this point and put the 12 rows in a different location? The task is twofold - I don't need these control rows in my data and I need value of "records" to verify loaded number of rows.
UPDATED: After some testing I found out that the Flat File source does not see that footer at all. This is good and bad - I do want to load this metedat into some other tables.
Dima.
View 7 Replies
View Related
Feb 19, 2008
When i try to open Sql Server Enterpris Manager the following error msg appers
Snap-in Failed to initialize
Name- unknown
CLSID{--}
how to solve this pbm help me very urgent
View 3 Replies
View Related
Feb 3, 2004
i am using a control that i downloaded from the control gallery It has a line for a connection string.
which i put on in there: data source=server;initial catalog=database;user id=blahblah;password=557896 and i get an error:
Exception Details: System.InvalidOperationException: The ConnectionString property has not been initialized.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[InvalidOperationException: The ConnectionString property has not been initialized.]
System.Data.SqlClient.SqlConnection.Open() +433
Microsoft.Vote.VoteButtonClick(Object sender, EventArgs e) +289
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +57
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain() +1277
How would i initialize the connection string.
any help would be appreciated
alucke
View 1 Replies
View Related
Sep 16, 2004
I am getting this problem when I try to open a DTS package.
MMC: Snap-in Failed to Initialize: Name: Meta Data Services:
CLSID(xxxxxxxxxxx)
Have anyone encountered this problem?
Lystra
View 4 Replies
View Related
Jun 9, 2008
I have problem with sql server configuration tool. it can not be opened
View 3 Replies
View Related
Sep 13, 2006
HI There
I have installed Reportin Services 2005 , X64. I selected install but do not configure.
Afterwards i applied Service Pack 1 and ran all the hotfixes for sql components as per KB 918222.
The i launch the RS configuration manager i succesffuly setup Report Server/Manager Virtual DIrectory and servcie identity.
I then setup the database, i create a new database to the local 2005 instance i just installed with RS, the databse is created successfully.
Basically i have green ticks all the way, however Initialize is greyed out i cannot take the option to initialize the server ???
When i try to restart the RS service it says that the service failed to repond in a timely fashion, when i check the even log the servcie only started 10 minutes later, and there are no errors ?
WHen i go back to RS config manager , initialize is till greyed out , this is the last step i ahve to do but i cannot take the option ???
PLEASE HELP, Thanx
View 6 Replies
View Related
Nov 27, 2006
I have a DTS package that is running under SQL 2005 (64-bit Itanium). It has a data driven query in it and I receive the following error:
ActiveX Scripting Transform 'DTSTransformation__1' was not able to initialize the script execution engine
I don't want to have to re-register any DLLs if I don't have to. Shouldn't this work out of the box?
Any ideas?
View 2 Replies
View Related
Feb 18, 2008
I have just completed a fresh install of SSRS 2005. Now, when I try to initialize it, it fails. I then try to delete any encrypted content and get the following error:
Code Snippet
ReportServicesConfigUI.WMIProvider.WMIProviderException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.DeleteEncryptedInformation()
From what I know, Reporting Services has never been installed on the machine in question. And if so, then haow can I get around this encrypted key issue?
Thanks!
View 6 Replies
View Related
May 2, 2007
I have a For Loop container where each iteration a Master record is inserted. I also have a number of package variables capturing rowcounts from the dataflow task. I later update the master record with the rowcounts. How do I initialize the package variables containing the rowcounts because currently, some of the rowcounts are being populated with rowcounts from another file.
thanks
View 3 Replies
View Related
Jun 25, 2006
I am using ms sql 2005 standard edition on windows Nt
Everything is working fine except the report server..
when i run the configuration tool and try to start the report server, it fails to start.. i am using sql on the local machine .
i have set p lmy database on the windows credentials..
i am using my machine name/user name as the account name for the database setup.
i have also used rsconfig utility to configure the report server but nothing happens after that..
pls help
View 5 Replies
View Related
Nov 11, 1998
I have a script that creates and populates several tables. However I only want this to occur if one table has a row count greater than zero. I'm trying to use GOTO to script to the end of the script. However I get the message "A GOTO statment references the label 'MYLABEL' but the label has not been declared." How can I do this.
I have something similiar to the following in my script:
IF (SELECT COUNT(*) FROM MYTABLE) = 0
BEGIN
PRINT 'NO ROWS FOUND'
GOTO MYLABEL
END
CREATE TABLE X...
SELECT INTO X FROM Y ...
ETC. ETC.
MYLABEL:
PRINT 'END SCRIPT'
View 2 Replies
View Related
Oct 31, 2014
I used code below to do bulk insert. Since csv file first row is column name. How to skip first row?
BULK
INSERT TEST
FROM 'c: est.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
View 4 Replies
View Related
