Hi All,
I am creating an installer for the creation and deployment of reports and need to know whether Reporting Services is installed before allowing the installer to run.
Is there a simple way for me to find out? I know that I can look at various registry entries but I'm not sure which is the best. Is this the best way anyway, or is there some better way to tell if RS is installed?
Thanks in advance
Paul
I have a server running Windows Server 2003 x64 SP2, SQL Server 2005 Enterprise SP2 (32 bit), and Visual Studio 2005 Enterprise (32 bit).
Did a full install of SQL, then followed with a full install of VS. What's weird is the reporting services portion of SQl appears to have been installed as a 64 bit instead of the 32, so now RS are not available.
Most of SQL shows up under the Program Files (x86) folder, but RS is in Program FilesMS SQL ServerMSSQL.3
Any know how I can pull the RS version out and get it to install correctly without an entire server rebuild as it is already in use?
The kicker comes when I tried to input the proper version again and it told me I needed ASP.net (32 bit) but when I tried to install it the dotnetfx.exe was not compatible. I have .Net Framework 2.0, and 3.5 loaded
Any help is appreciated!
Hi All! I'm a newbie to SQL & have a question about Reporting Services. I have already installed SQL Express & now want to install Reporting Services. Is there a way to install just this feature or do I need to do a complete re-install? Thanks!
View 5 Replies View RelatedI have a question regarding Reporting Services:
I want to run the Reports on a system that has Oracle Database but reporting Services are not installed there. Only Application exe file will be there designed in .NET Windows Forms.
Reports will access oracle Database.
Hi, all here,
Would anyone here please guide me how can I check the version of reporting services installed? My problem is in my virtual machine, both SQL Server and SQL Server 2005 are installed, but I can create report in the vistual studio 2005 IDE, but cant deploy it to the reporting server database, in addition, I cant connect to reporting services database in SQL Server 2005 management studio.
Is it possible to install two different versions of reporting services in the same virtual machine? Please anyone here give me some advice for that. Thanks a lot.
With best regards,
Yours sincerely,
I have installed windows server 2003 on one of our test boxes (prior to live) and found that reporting services is now unavailable.
When I browse to the report server I get
Service Unavailable
The event log reports several times
"A process serving application pool 'reportserver' terminated unexpectedly. The process id was '3500'. The process exit code was '0xffffffff'.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
before the worker process is disabled:
"Application pool 'reportserver' is being automatically disabled due to a series of failures in the process(es) serving that application pool.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
Has anyone seen similar behavior?
Stuart
"
I have SQL 2005 reporting services installed and running, however I do not have the BI dev studio installed and cannot figure out how to get it installed.
The report server is operating correctly since I have developed reports on another pc using VS 2005 and uploaded them to the server.
How do I get the BI dev studio installed on the server?
Hi,
Can we install reporting services 2005 in a machine in which is not installed SQL server 2005.?
Thanks
I would like to deploy several reports to production server, Do i need to install reporting services entire software in order to run the reports or is it possible to just have runtime files installed on it to run the reports.
please help, i have almost 100 reports to be deployed on this server which is located in other country.
Thanks for the helpful information.
(i am using SQL server 2005 / reporting services 2005.)
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
1. So do I use that free tool SQL tool SQL Server Management Studio Express with the real version of SQL 2005? I do not see any program like enterprise manager that sql 2000 came with
2. We use Crystal reports 8.0 now. I noticed a new verison of crystal reports and also SQL reporting tools. But I am confused how the pricing works.. and which would cost more to use on production.. anyone can explain this ?
We are upgrading a Windows 2003 system with SQL Server 2000 and we've been seeing the notification services .net dll fail to install. The error that is displayed has a internet lookup to Microsoft. When we lookup the error it mentions that MS DTC needs to be started for the notification services to be installed. We re-imaged the box and verified it was running prior to the install of SQL 2005. Anyone have any ideas why this error is occurring?
View 3 Replies View RelatedI'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
had asked this question (SQL 2008R2) at a SQL Pass convention and I was told that the only way you get DTEXEC is by installeding Integration Services. So, for example, if someone did not really want to use Intergartion Services but run SSIS packages vai command line, they could just keep Intergration Services turned of and run DTEXEC against the DTSX file system location.I have just installed SQL 2012 Developer edition, did not select Intergration Services but see DTEXEC in both 64 bit and 32 bit folders.
1 - Was what I was told incorrect regarding how DTEXEC gets on a box?
2 - Did MS change how they deploy DTEXEC in sql 2012. The really only other thing I picked during the SQL 2012 install was SQL Data tools.
I am a bit out of my league here so any help would be greatly appreciated.
On a Windows SBS 2003 R2 server. I am trying to add Integration Services at the request or an external Consultant group. I ran the install & followed the bouncing ball from this article
http://msdn2.microsoft.com/en-us/library/bb326043.aspx
The only odd thing is that it didn't give the option to pick an instance (only Microsoft SQL Server 2005).
It seems to install fine, no pop up error or anything but the SSIS service isn't installed. If I try & connect to it via the SQL Server Management studio - Selecting Integration Service in Server Type I can browse for the server name but on connecting it says " Connect to SSIS service on machine "Riley" failed
The specified service does not exist as an installed service.
& looking through the list of Services I can't find it.
I have uninstalled Integration services & reinstalled twice now but the same result (no service) ... what am I doing wrong, it seemed so simple from the instructions.
Dear all,
When I try to run Reporting Services from my Connect Object Explorer appears this error:
The Report Services WMI Provider is not installed or is misconfigured (Microsoft.SqlServer.Management.UI.RSClient)
SAS, SSIS and Database Engine are running properly but I don't know how to arrange that WMI Provider in my development server
Let me know what steps are necessary in order to achieve this goal or provide me any link related
Thanks in advance,
Hello,
I started out with SQLExpress and that installed just fine. After going through some books about SQL, I found out the limitations to SQLExpress and realized that I would need the full version if I was to further my education on this. (analysis services, integration services, etc etc.)
I uninstalled SQLExpress and downloaded and installed SQL Server 2005 (Enterprise Edition I believe).
I have installed SQL Server 2005 and I went to go connect. It says it requires a Server Name. So I put the local name of the computer in there and came back with an Error 40. During the troubleshooting of what is causing this error I discovered there are no Services installed from SQL Server 2005. They were removed when I removed SQLExpress and not reinstalled when I installed SQL Server 2005.
I checked in both the Services Icon in Administrative Tools and in the SQL Server Configuration Manager.
This would account for my not being able to connect to a local server.
How do I bring them back. I have uninstalled and reinstalled SQL Server 2005 3 times now. It doesn't bring them back.
Now, apparently Enterprise edition does not run on Windows XP Pro SP2. Is there anyway around this? I heard something about a manual installation from the CD but I didn't understand what he was attempting to say.
http://www.dbtalk.net/microsoft-public-sqlserver-setup/no-services-components-installed-292167.html
Thanks,
Wayne
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
Any way to run a package without having VS Data Tools or BIDS installed in the local machine? Scenario: I build a package and I put the package in a folder. I would like that one of my colleague run the package all by himself but I don't want install BIDS or DTT in his machine. Is there any plug in, trick or something else I can do?
View 7 Replies View RelatedI am getting the error "The required .svc handler mappings are not installed in IIS" in the Master Data Services Configuration Manager. I am running the configuration tool as administrator on a domain joined machine using a domain user account (which is also a member of the local Administrators group).
My configuration is as follows:
Windows 8
SQL Server 2012 RTM + CU 2 (build 11.0.2325).
All required prerequisites should be installed in IIS.I have reviewed this issue: URL...
Could someone from the SQL Server Express team confirm that SQL Server Express SP2 w/Advanced Services shows up as "SQL Server 2005" in the installed programs list? The "Express" portion seems to be missing. And how would one tell the difference between the Standard Edition and the Express Edition based on this?
Thanks.
Hi Friends,
I have a question. At my home computer i downloaded and installed VWD. As usual it also installed Sqlexpress as part of the installation(i checked the option). Later on i downloaded Management studio separately so i am fine with my home computer as every thing is free.
But at work we decided to develop application using VS 2005 and Sqlserver 2005. So we bought and installed VS2005 professional edition at work and it also installed Sqlexpress during the installation as a defualt desktop engine. I am fine with that too. But i am not understing where do i get the Management studio? Is it some thing i could get it off the web for free or what? I am not sure we would have an option while installing the VS 2005 professional that also does install management studio and we need to check that option. I am not sure if we could get the management studion off the web for free and and evelop applications.
Please advise. Thanks -L
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
I want to find whether SQL Server 2005 x86 is installed or SQL Server 2005 x64 is installed programatically(Any API would do.) If anyone can recommend a registry key that I can rely on find whether it is a 32 bit or 64 bit SQL Server that would suffice.
View 5 Replies View RelatedHi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
HI There
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
This is for reporting services 2000 and 2005.
Thanx
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension..
Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT
{ [Time].[Month].&[2006-09-01T00:00:00] ,
[Time].[Month].&[2006-10-01T00:00:00],
[Time].[Month].&[2006-11-01T00:00:00],
[Time].[Month].&[2006-12-01T00:00:00]
} on COLUMNS,
{
[Measures].[Unique Users],
[Measures].[UU Pct 1],
[Measures].[UU Pct 2],
} ON ROWS
FROM [Cube]
Any ideas?
Thanks,
Arjun
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph