How Can I Use Reporting Services On ASP.NET Pages?
Nov 1, 2006
Hi all,
Could you tell the correct way to use Reporting Services on ASP.NET pages?
Now I wanna create an ASP.NET page to show some reports, and I hope to control all logic by program, so I need know the API between ASP.NET and Reporting Services.
For example, I wanna pass some data to Reporting Services via API, and then Reporting Services handle the data and return reports to me, and then I can show the reports on my web pages.
Please tell me how?
View 5 Replies
ADVERTISEMENT
Apr 22, 2015
I would like to have different headers on different portion of the report?
View 2 Replies
View Related
May 28, 2015
I am building a report with 3 tablixs using SQL Server 2008. Tablix 3 is long and spans over 3 pages. I am trying to get the header for the to remain visible on all pages and as we scroll through the end of each page. Now this is a frequently asked question and I have found the approach to achieve the desired results. All approaches involve clicking in the advanced mode of the row and column groups to modify the static and dynamic groups.However, when I click the advanced mode there is no effect. I have attached a picture of the design mode. The tablix3 is grouped by the Department column.
View 9 Replies
View Related
Sep 17, 2007
I am experimenting with SQL Reporting Services on a machine with SQL Server 2005 loaded and deploying
reports to a different server. both servers are equivalent in resources.
In the browser on the Reports machine when I first go to the Reports address, it takes a very long time
to build and load the page. it then takes a long time for each drilled down page. Subsequent calls to the same
pages are very fast if done within a certain amount of time. This implies that there must be some form of
caching going on and that the cache expires after a period of time. I have seen in the RSReportserver.config
file that there are parameters relating to report caching, but they all appear to reference the actual reports being
generated. My issue is simply being able to build the start page and other navigation more quickly and to
keep it active so it does not have to perform that build each time.
Any information related to managing this situation would be very much appreciated..
Thank you, Ray
View 13 Replies
View Related
May 18, 2015
I must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT
rc.wo_id,
rc.process_id,
rc.item_id,
rc.lot_no AS full_lot_no,
rc.oper_id, rc.seq_no,
CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
Rework ID Ingot Oper ID Piece Rework
28 xxxxxx14 5 M88 Route 1
55 xxxxxxx15 5 B106 Route 2
79 xxxxxxx19 5 M68 Route 3
164 xxxxxx234 5 T16 Route 4
xxxxxx234 5 B82 Route 4
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
View 2 Replies
View Related
Aug 1, 2005
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.
View 21 Replies
View Related
Jul 3, 2007
I have designed a fairly simple report in report designer that uses an analysis services cube as its input, and a basic matrix object as the primary design component. Cube performance either via object browser in Analysis Services or via connection from Excel is great. It does exactly what you build a cube for, i.e. it builds aggregations you can get to quickly. However rendering from a report designer report within Report Manager is a different story.
Even though this report is being rendered from an execution snapshot, it is painfully slow at opening and closing different levels of drill down. The report does have six levels of drill down, which I am sure is a factor. If I use a smaller dataset, performance does become more acceptable. However, I don't consider the requirements of my report to be all that extraordinary.
My conclusion thus far is that larger data sets with many possible page renderings are not the best candidates for HTML rendered reports. In this case Microsoft's cube analysis add-in to Excel might be a better choice. Thoughts and feedback on either how to improve the rendering speed or other presentation alternatives that would perform better would all be welcome.
View 5 Replies
View Related
Aug 26, 2015
I has developed one report in SSRS in SSRS 2008 R2 and when I preview the report in report viewer in all pages Report Header is repeating, whereas when I export the same report to PDF strange for some pages header is missing.
When I searched in google for SSRS 2008 Microsoft agreed that it is a bug and they provided the hotfix. And this hotfix is not working for SSRS 2008 R2 as it is a higher edition but still I facing the same issue.
View 5 Replies
View Related
Sep 21, 2015
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies
View Related
Oct 2, 2014
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
View 2 Replies
View Related
Mar 22, 2008
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
View 1 Replies
View Related
Jul 13, 2015
Default code page in ETL package is 1252 which will not work if the collation is different e.g in Japanese_CI_AS, it is 932.
My question is how to write a generic ETL package so that it can cater any collation or any code page.
View 5 Replies
View Related
Dec 6, 2006
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
View 1 Replies
View Related
Jul 27, 2015
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
View 7 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Sep 11, 2015
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
View 4 Replies
View Related
May 14, 2008
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
View 4 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies
View Related
Jun 19, 2015
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
View 3 Replies
View Related
Jan 15, 2007
HI There
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
This is for reporting services 2000 and 2005.
Thanx
View 1 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Jul 23, 2010
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
View 4 Replies
View Related
Dec 3, 2006
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension..
Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT
{ [Time].[Month].&[2006-09-01T00:00:00] ,
[Time].[Month].&[2006-10-01T00:00:00],
[Time].[Month].&[2006-11-01T00:00:00],
[Time].[Month].&[2006-12-01T00:00:00]
} on COLUMNS,
{
[Measures].[Unique Users],
[Measures].[UU Pct 1],
[Measures].[UU Pct 2],
} ON ROWS
FROM [Cube]
Any ideas?
Thanks,
Arjun
View 8 Replies
View Related
Sep 16, 2007
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
View 1 Replies
View Related
Dec 19, 2006
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side.
My sample report has few parameters that must be passed so I pass these parameters with code.
<My code>
ReportServiceExecution.ReportExecutionService rs = new ReportServiceExecution.ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
string extension, mimeType, encoding;
ReportServiceExecution.Warning[] warnings;
string[] streamID;
ParameterValue[] parameters = new ParameterValue[2];
parameters[0] = new ParameterValue();
parameters[0].Name = "pID";
parameters[0].Value = "6548747";
parameters[1] = new ParameterValue();
parameters[1].Name = "pClass";
parameters[1].Value = "8";
ExecutionHeader header = new ExecutionHeader();
ExecutionInfo executionInfo = rs.LoadReport(reportPayslip.Name, null);
executionInfo = rs.SetExecutionParameters(parameters, "en-us");
rs.ExecutionHeaderValue = header;
rs.ExecutionHeaderValue.ExecutionID = executionInfo.ExecutionID;
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID);
</My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error>
"This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value."
</Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
Any help would be much appreciated.
View 3 Replies
View Related
May 29, 2007
Hi,
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
View 4 Replies
View Related
Dec 10, 2007
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value.
1. In sql we have a like key word to query . for example select * from product where product like "AA%".
what is equavalent mdx query to get such results ?
2.How to impliment the multivalue parameters without using dropdown box?
View 1 Replies
View Related
Aug 6, 2012
I am facing sever Refresh issue in PPS Reports. I have Two Dashboard
Dashboard_One and Dashboard_Two
I have few Filters on both the Dashboard .
In Dashboard_One I have 2 Filters
1)Year filter where Year 2012 is my Default value
2)City Filter where "CityOne" is Default Filter Value
If I select Year"2010" in Period Filter and "CityTwo" In City Filter.I see Related reports . Now I navigate to Dashboard_Two to See Other Reports where I have few Other Filter Like "Country" where I select "CountryThree" . When I navigate Back to Dashboard_one I do not see Dashboard with Default value given to them
I still see Filter value Year=2010 and CountryFilter="CountryTwo" in Dashboard Dashboard_One .. where as I should have seen it based on the Default value given to the Filter.. How should I resolve this refresh issue which I am facing in PPS Dashboard. I do not see Default value in the Filter ,It always give the filter value which was selected later when Navigated back.
View 3 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
May 8, 2015
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
View 5 Replies
View Related
Jul 30, 2007
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
thank you
regards
Andreas
View 3 Replies
View Related
May 15, 2007
Hi all,
Till now all the reports for our application was created in Reporting Services 2005 with SQL Server Database(OLTP) stored procedures.
Most of the reports take 10 to 15 report Parameters and all are multi valued.
Now because of the slow response time,we have decided to use OLAP cubes data source. We have created the OLAP cube in Microsoft Analysis Services.
Can someone tell me how to use the report parameters to query the Cube.
Any links,books for reference would be of great help..
Thanks,
Looking forward to your replies
View 3 Replies
View Related
Jan 27, 2004
Hi
What is the diff between the above 2?
Thanks.
View 1 Replies
View Related
