How Can I Use Sql Express Instead Of Sql Server 2005 For Asp.net Providers
May 22, 2007
Hi all,
Since I activated the aspnet_regsql.exe tool, it has been a bad day - here's why:
Originally I installed VS2005 Pro (without Sql Express) and then Sql Server 2005 Dev. I then started to learn asp.net from the ".NET FRAMEWORK 2.0 Web-Based client Development" Training kit from Micorsoft. I have compiled and run every exercise up till Chapter 9 lesson 2 exercise 1, without the need to start the Sql Server 2005. In exercise 2 I should learn about asp.net profilers and the exercise showed me to use the aspnet_regsql.exe tool if I was using Sql Server 2005 - and so I did, and exercise 2 worked fine after a couple of adjustment in the connection string, because it was configured to use the SQLEXPRESS server by default.
However - in Chapter 9 lesson 3, I should not use asp.net providers, so I shut down the Sql Server 2005, because I don't have that much memory to spend. Now the trouble comes - every website I have made afterwards require that the Sql Server 2005 is running or else I get some errors.
How can I get back to the way it was before I activated the aspnet_regsql.exe, so I don't have to have the Sql Server 2005 running every time I want to make a website using aspx?
In step one of this Blog ,what's this mean Step 1: Create or obtain a blank SQL database instance and how do i go about doing it http://weblogs.asp.net/scottgu/archive/2005/08/25/423703.aspx
For the second time in as many months I've been asked the question. What is the license requirement for me, the service provider, for offering my clients the ability to use SQL Server Express?
I understand the license to say that as long as I'm registered (no cost) there is no further licensing needed in order to offer this to my clients.
Could someone clarify this for me? If I'm incorrect I'd appreciate the right answer.
I am trying to configure an SSIS connection manager to recognise a SQL Server 6.5 database but I can't get it to work. Testing the connection works but I am unable to select a database from the drop down list.
Which OLE DB provider should I use to access a SQL Server 6.5 database?!
_________________________________________________________________________________________________________________________ Inability is a disaster; patience is bravery; abstinence is a treasure, self-restraint is a shield; and the best companion is submission to Divine Will.
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
Hi Guys, I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]? ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Hi, I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ? Thanks in advance.
Q1: Does Sql Server 2005 Express support Web/Internet to other SQL Server 2005 Express Clients or does it have to Synch across the internet to a fully installed setup SQL Server 2005 with IIS?
Q2: Does SQL Server 2005 Express support Direct Replication between other SQL Server 2005 Express clients?
In my SQL Server Express (that is installed in my Windows XP Pro PC), SQL Server 2005 Network Configuration has Protocols for SQLEXPRESS. I tried to do "Enabling CLR Integration" in my SQL Server Express: (1) If I clicked on "Surface Area Configuration for Services and Connections", I got an error "An exception occurred in SMO while trying to manage a service, (Microsoft.SqlServer.Smo) Additional information: Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). (2) If I clicked on "Surface Area Configuration for Features, I got a different error "Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required computer has the required Windows Management Instrumentation components and then try again. (SQLSAC) Additional Information: An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo). Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) The operation could not be completed. (WinMgmt). Please help and tell me how I should do to get "Enabling CLR Integration" in my SQL Server Express done and how I can create SQLCLR Project in VB 2005 Express.
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area": (1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the following: Select Computer The Surface Area Configuration of this surface area of this computer or a remote computer. Specify a computer to configure: O Local computer O Remote computer Should I choose the "Local computer" or the "Remote computer" option? (2) Below the "Configure Surface Area for localhost [change computer]", I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS |-| Database Engine Service I picked => Remote Connection On the right-hand side, there are: O Local connections only O Local and remorte connections O Using TCP/IP O Using named pipes only O Using both TCP/IP and named pipes Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________ System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------ Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) ____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC. 1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class ////////////////////////////////////////////////////////////////////////////// I got the following error messages: SecurityException was unhandled Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")." Troubleshooting tips: Store application data in isolated storage. When deploying an Office solution, check to make sure you have fulfilled all necessary requirments. Use a certificate to obtain the required permission(s). If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list. Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Downloading and installing VS 2008 Express also created a Miscrosoft SQL Server folder. How do I install the SQL Server 2005 Express?The following is what I found from the HELP menu bar of the VS 2008 Express. Where can I find the sqlexpr.exe? TIA,Jeffrey
To install SQL Server Express To begin installation, double-click sqlexpr.exe. Note: SQL Server Express is available as a self-extracting executable file (sqlexpr.exe) from both the Visual Studio 2005 CD and the SQL Server Express Web site. SQLEXPR.EXE installs on x86-based computers and to the 32-bit subsystem (WOW64). For more information, see Hardware and Software Requirements (SQL Server Express)
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
I had some issues on my server and had to uninstall .Net Framework 2.0, SQL Server 2005 Express, and SQL Express Toolkit. I installed SQL Server 2005 Express and it seemed to be ok.
Then my problems all started when I tried to install SQL Express Toolkit because I needed to install DTS Wizard again, and it errors out and wouldn't let me install it. So I uninstalled everything that's listed above again.
I then tried to install SQL Server 2005 Express again, and on the second from last screen, while its listing all the components and configuring them, I get the following error as it's configuring the last component... which was the SQL Server Database Services.
TITLE: Microsoft SQL Server 2005 Setup ----------------------------------------------------------- The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
I tried to re-install the SQL Server Express another 7 times wth no luck.
If anyone can point me in the right direction I'd really appreciate it.
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) The system cannot find the path specified.
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) The system cannot find the path specified.
I use Visual Web Developer Express 2005 with SQL Server 2005 Express. With this combination I was able to create a new database.I can add tables, views etc.But no triggers....do you guys have an idea how I can add a new trigger?Please help!
This is a question about the movie collection starter So here it is:
I am running Vista RC1 (Build 5600) and vb express 2005
I downloaded and install SQL Server Express 2005 Edition SP2 - Since SQL Server Express 2005 Edition SP1 does not work with Vista
But when I try to run the collection app or if I try to download and install the Amazon version I get the following error message:
There was a problem loading data: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be cause by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I need any advice you can give me to solve this problem, how to change the default settings, because I do not know where to start.
In the last one and half years, I used the Northwind Database in SQL Server Management Studio Express (SSMSE) to learn the programming of SqlConnections, Data sources, Database Exploere, ADO.NET 2.0, etc. via VB 2005 Express.
The Northwind Database in my SSMSE got lost very often, but I was not aware of it. How can I know where the Northwind Database is used or processed by my VB 2005 Express projects that were the examples of some tutorial books or my trial projects? How can I release the Northwind Database back to my SSMSE from the VB 2005 Express projects? Please help and advise.
(1) I have already installed of SQL Server 2005 Developer Edition first.
(1) Can I install visual studio 2008 without the 2005 express edition of SQL server? Will be any problems because I don't have express edition of SQL server? Do I need to install the express edition of SQL server as well?
(3) How to use SQL Server 2005 Developer Edition instance on visual studio 2008?
I have a DTS package which is using OLEBD provider for Oracle, it was working fine. I tried to open this package and I got this error message "There was a problem retrieving the list of OLE DB Providers"
I tried to intall MDAC8.2, it didn't help, should I reinstall SQL Server?
I lost in SQL Server 2000 with SP3a on W2K Server Ole DB Provider. When I trying make new linked server I cannot select Provider name, because menu is empty. Existing link between SQL servers returning error message Error 7302: Could not create an instance of OLE DB provider 'SQLOLEDB'. OLE DB error trace [Non/interface error: CoCreate of DSO for SQLOLEDB returned 0x80004002]. I tried completly uninstall SQL from server and I installed server again without success.
I have Windows server 2003 SR2 and wich to install on it OLE DB Providers. I mainly have an application that needs OLE DB provider for Excel and Dbase to access read excel and dbase Files on disk. I have searched all over the web for a download link. I installed MDAC on the server and restarted bu still no luck. My ODBC applet in the control panel only shows the SQL native drivers.
PS: Windows is 64 bit. I believe this might be why. But what can I do in this situation?
