Hi
I've been using Activity Monitor to view the SQL for a process id. However, I notice that not all process ID's have any SQL to view
I do see when a statment spawns multiple threads but even clicking all the threads turns up no SQL.
1. Why does Acitivity Monitor only show SQL for certain queries?
2. What system tables can I view to see the SQL beingexecuted?
I appreciate your help
Hi,We have SQL 7 running on Windows 2000 Server. For some reason we areunable to view Locks / Process ID from workstations running Windows XPSP2 with Enterprise Manager. Nothing shows up in the window on theright. All it's says at the top of the window is "There are no items toshow in this view" If we use Enterprise Manager on the server, we canview the Locks / Process ID. We can view both, Process Info and Locks /Object from the workstations and server, just not the Locks / ProcessID. We used to, but I don't know what changed. I'm thinking it mighthave to do with upgrading to XP SP2, or a Windows update, but I'm notsure.Has anyone out there experienced this? Or does anyone know thesolution?Thanks,Mark
View 1 Replies View RelatedGood afternoon everyone, I have written a view that pulls customer demographic infomration as well as pulling data from multiple scalar-valued functions. I am using this view to pull and send data from one database to another in the same SQL server. The problem that I am having is that I am running this import as a scheduled job in windows. The job is taking almost 24 hours to complete this task. The total number of records that are being pulled is around 21,000+. I have tried removing the functions from the view and it only takes the view 20 seconds to pull the demographic information from the same 21,000+ records but when I add the function calls this is where the time to complete goes through the roof. Has anyone encountered this before if so what would you suggest doing? Any help would be appreciated. Here is the syntax for my view: SELECT TOP 100 PERCENT CUS_EMAIL AS Email, CUS_CUSTNUM AS MemberID, CUS_PREFIX AS Prefix, CUS_FNAME AS FirstName,
CUS_LNAME AS LastName, CUS_SUFFIX AS Suffix, CUS_TITLE AS Title, CUS_STATE AS State, CUS_COUNTRY AS Country, CUS_ZIP AS ZipCode,
CUS_SEX AS Gender, CAST(CUS_DEMCODEA AS nvarchar(20)) + ',' + CAST(CUS_DEMCODEB AS nvarchar(20))
+ ',' + CAST(CUS_DEMCODEC AS nvarchar(20)) + ',' + CAST(CUS_DEMCODED AS nvarchar(20)) AS DemoCodes,
dbo.GetSubScribedDateMLA(CUS_CUSTNUM, CUS_EMAIL) AS MLASubscribedDate, dbo.GetSubScribedDateMLP(CUS_CUSTNUM, CUS_EMAIL)
AS MLPSubscribedDate, dbo.GetSubScribedDateLDC(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubscribedDate, dbo.GetMLAExpiration(CUS_CUSTNUM,
CUS_EMAIL) AS MLASubExpireDate, dbo.GetMLPExpiration(CUS_CUSTNUM, CUS_EMAIL) AS MLPSubExpireDate,
dbo.GetLDCExpiration(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubExpireDate, dbo.IsProspect(CUS_CUSTNUM, CUS_EMAIL) AS AGMProspect,
dbo.IsCurrentCustomer(CUS_CUSTNUM, CUS_EMAIL) AS AGMCurrentCustomer, dbo.IsMLAMember(CUS_CUSTNUM, CUS_EMAIL) AS MLAMember,
dbo.IsMLPMember(CUS_CUSTNUM, CUS_EMAIL) AS MLPMember, dbo.IsLDCMember(CUS_CUSTNUM, CUS_EMAIL) AS LDCMember,
dbo.CalculateTotalRevenue(CUS_CUSTNUM, CUS_EMAIL) AS AGMTotalRevenue, dbo.GetPubCodes(CUS_CUSTNUM, CUS_EMAIL)
AS ProductsPurchased, dbo.GetEmailType(CUS_CUSTNUM, CUS_EMAIL, CUS_RENT_EMAIL) AS EmailType, CUS_COMPANY AS Company,
CUS_CITY AS City
FROM dbo.CUS
WHERE (CUS_EMAIL IS NOT NULL) AND (CUS_EMAIL <> '') AND (CUS_EMAIL_VALID = 'Y') AND (CUS_EMAIL LIKE '%@%.%') AND (CUS_RENT_EMAIL = 'Y' OR
CUS_RENT_EMAIL = 'R' OR
CUS_RENT_EMAIL = 'I') AND (CHARINDEX(' ', CUS_EMAIL) = 0) AND (CUS_EMAIL NOT LIKE '@%')
Thanks in advance Michael Reyeros
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
select * from sysprocesses
How can I determine whether a process a system or user?
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. ยง Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies View RelatedI am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies View RelatedWrite a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies View RelatedI had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
I have this view in SQL server:
CREATE VIEW dbo.vwFeat
AS
SELECT dbo.Lk_Feat.Descr, dbo.Lk_Feat.Price, dbo.Lk_Feat.Code, dbo.SubFeat.SubNmbr
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
When ever I open using SQL Entreprise manager to edit it by adding or removing a field i inserts Expr1,2.. and I don t want that. The result I get is:
SELECT dbo.Lk_Feat.Descr AS Expr1, dbo.Lk_Feat.Price AS Expr2, dbo.Lk_Feat.Code AS Expr3, dbo.SubFeat.SubNmbr AS Expr4
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
I don t want Entreprise manager to generate the Expr fields since I use the real fields in my application.
Thanks for help
I was looking through our vendors views, searching for something Ineeded for our Datawarehouse and I came across something I do notunderstand: I found a view that lists data when I use it in t-sql,however when I try to use the statement when I modified the view (viaMS SQL Server Management Studio) I can not execute the statement. I getThe column prefix 'dbo.tbl_5001_NumericAudit' does not match with atable name or alias name used in the query.Upon closer inspection, I found two ON for the inner join, which I dontthink is correct.So, how can the view work, but not the SQL that defines the view?SQL Server 2000, up to date patches:SELECT dbo.tbl_5001_NumericAudit.aEventID,dbo.tbl_5001_NumericAudit.nParentEventID,dbo.tbl_5001_NumericAudit.nUserID,dbo.tbl_5001_NumericAudit.nColumnID,dbo.tbl_5001_NumericAudit.nKeyID,dbo.tbl_5001_NumericAudit.dChangeTime,CAST(dbo.tbl_5001_NumericAudit.vToValue ASnVarchar(512)) AS vToValue, dbo.tbl_5001_NumericAudit.nChangeMode,dbo.tbl_5001_NumericAudit.tChildEventText, CASEWHEN nConstraintType = 3 THEN 5 ELSE tblColumnMain.nDataType END ASnDataType,dbo.tbl_5001_NumericAudit.nID,CAST(dbo.tbl_5001_NumericAudit.vFromValue AS nVarchar(512)) ASvFromValueFROM dbo.tbl_5001_NumericAudit WITH (NOLOCK) LEFT OUTER JOINdbo.tblColumnMain WITH (NoLock) INNER JOIN---- Posters comment: here is the double ON--dbo.tblCustomField WITH (NoLock) ONdbo.tblColumnMain.aColumnID = dbo.tbl_5001_NumericAudit.nColumnID ONdbo.tbl_5001_NumericAudit.nColumnID =dbo.tblCustomField.nColumnID LEFT OUTER JOINdbo.tblConstraint WITH (NOLOCK) ONdbo.tblCustomField.nConstraintID = dbo.tblConstraint.aConstraintID AND(dbo.tblConstraint.nConstraintType = 4 ORdbo.tblConstraint.nConstraintType = 9 ORdbo.tblConstraint.nConstraintType = 3)UNION ALLSELECT aEventID, nParentEventID, nUserID, nColumnID, nKeyID,dChangeTime, CAST(CAST(vToValue AS decimal(19, 6)) AS nVarchar(512)) ASvToValue,nChangeMode, tChildEventText, 5 AS nDataType,nID, CAST(CAST(vFromValue AS decimal(19, 6)) AS nVarchar(512)) ASvFromValueFROM dbo.tbl_5001_FloatAudit WITH (NOLOCK)UNION ALLSELECT aEventID, nParentEventID, nUserID, nColumnID, nKeyID,dChangeTime, CAST(vToValue AS nVarchar(512)) AS vToValue, nChangeMode,tChildEventText, 2 AS nDataType, nID,CAST(vFromValue AS nVarchar(512)) AS vFromValueFROM dbo.tbl_5001_StringAudit WITH (NOLOCK)UNION ALLSELECT aEventID, nParentEventID, nUserID, nColumnID, nKeyID,dChangeTime, CONVERT(nVarchar(512), vToValue, 121) AS vToValue,nChangeMode,tChildEventText, 3 AS nDataType, nID,CONVERT(nVarchar(512), vFromValue, 121) AS vFromValueFROM dbo.tbl_5001_DateAudit WITH (NOLOCK)
View 1 Replies View RelatedHi All,
I came across a weird problem in the morning in SQL Server 7.0 on NT Cluster Server.
* SP_WHO - returned a list of System Process IDs where ID = 6 shown as a sql server User comming from a web server
doing rollback on a stored procedure..
a) I tried to KILL the user but I couldn't.
b) Next I stopped the IIS service on Webserver and tried to KILL the user but still couldn't. Surprisingly the user was showing up as comming from
the same Webserver eventhough the IIS Service was not running.
* When I checked in the Current Status window of Enterprise Manager - the same Process ID was shown as SYSTEM User doing rollback on a stored
procedure.
Because of above user problem I was not able to do any Delete or update in the database. Also Restore of database failed because of the above user.
I could get rid of this problem only after STOPPING and STARTING the SQL Server Service.
Does any one one have any IDEA on this type of problem. If so Please let me why it happend and what needs to be done to resolve this from happening again
Thanks
Sekhar
Dear friends,
I'm working on 5 different servers,my work is to write the script and make it to run successfully.
I've two databases for me one to test the script and the other for the final script. after that i'l implement in other servers. after successful execution, the testing team will take care. now my problem is, some times i'm not able to find the exact script which was successfully runned.(on some servers, modifications were done.because some dependencies will be increased).
my question is how to maintain the exact script? may be this is a silly question, but after one week i'm not able to find the exact script.
please help me in this regard with your valuble suggesions.
Vinod
Hi,Please help.I have 2 tables as followings:CREATE TABLE [dbo].[Master] ([masitemno] [char] (10) NOT NULL ,[masqty] [decimal](10, 3) NOT NULL ,[masunitcost] [decimal](10, 2) NOT NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[Transaction] ([transeqno] [int] NOT NULL ,[tranitemno] [char] (10) NOT NULL ,[tranqty] [decimal](10, 3) NOT NULL ,[tranamount] [decimal](10, 2) NOT NULL ,[tranunitcost] [decimal](10, 2) NOT NULL) ON [PRIMARY]GOALTER TABLE [dbo].[Master] WITH NOCHECK ADDCONSTRAINT [PK_Master] PRIMARY KEY NONCLUSTERED([masitemno]) ON [PRIMARY]GOALTER TABLE [dbo].[Transaction] WITH NOCHECK ADDCONSTRAINT [PK_Transaction] PRIMARY KEY NONCLUSTERED([transeqno]) ON [PRIMARY]GOTable "Transaction" has about 1,000,000 (one million rows) and Table"Master" has about 500,000 rows.I have to update "MASTER" table with "TRANSACTION" table withrow-by-row processing basis sorting byprimary key TRNSEQNO column.Sometimes TRANSACTION can explicitly SET "MASQTY" and "MASUNITCOST"columns (TRANUNITCOST<>0) of MASTERwhich linked byitemno and after that AMOUNT column of next row ofTRANSACTION will used thisnew UNITCOST of MASTER as followed statements.-------------------------------------------------declare @count int, @max intset @count=1set @max = (select max(seqno) from transaction(nolock)while @count<=@maxbeginupdate TRANSACTIONset TRANAMOUNT = TRANQTY * (select MASUNITCOST from MASTERwhere MASITEMNO=TRANITEMNO)where TRANSEQNO = @countand TRANUNITCOST = 0update MASTERset MASQTY = MASQTY + TRANQTYfrom TRANSACTIONwhere TRANSEQNO = @countand TRANUNITCOST = 0and MASITEMNO=TRANITEMNOupdate TRANSACTIONset TRANAMOUNT = TRANQTY * TRANUNITCOSTwhere TRANSEQNO = @countand TRANUNITCOST <> 0update MASTERset MASQTY = MASQTY + TRANQTY,MASUNITCOST = TRANUNITCOSTfrom TRANSACTIONwhere TRANSEQNO = @countand TRANUNITCOST <> 0and MASITEMNO=TRANITEMNOset @count = @count +1end-------------------------------------------------The above sample statements take me more than 10 hrs. (I quit beforeactually done) with MS SQL SERVER 7.5 SP4.on WIN2K SERVER (2 XEON PROCESSORS, 1GB MEM.). I tried to use triggerbut result is not correct.Please advise on shorten running time (in minutes , maybe) and betterperformance.Thank you and appreciate any suggestionsNipon Wongtrakul
View 5 Replies View RelatedSorry but how do you configure to run IN PROCESS. My task runs like this in a BAT file
dtexec /f "\ssssagemetxteursAdminFCTestDTSXTest_AlexRename_file_alex.dtsx"
Thanks,
aL.
Hi
In installing sql express/management, during installion I get an error message when it comes to sql db services - It says setup failed because there is no process on the other end of the pipe.
Also, When I go to Start/All Programs/Microsoft Server 2005/Configuration Tool it says empty
This is running on Vista RC1
There is no way for me to enable remote connection
When I start Microsoft Sql Server Management Studio there is no server name to select from or choose from browseing
There is no sqlbrowser in SERVICES for me to start.
Also not install during installation is the work station component.
Any help?
Thanks
Dear all,
I'm starting an estimation exercise for an ETL/Datawarehouse project.
Does any of you knows a proven methodology and benchmark information to be able to estimate the overall effort of an ETL project. We have an idea on the number of tables/fields in the source systems, and a (very high-level) idea on the complexity of the different transformations.
Is there any website/document/whitepaper somewhere where an estimation technique is presented ?
Thanx
Maylo