select * from TABLE where user='jacky' ,it can working,but if like this:
dim name as string="jacky"
select * from TABLE where user=name
it won't doing,Can a variable used in SQL select command,if can,how to make it working.
All,
Please can someone advise how to use SQL select statement with where clasue which is based on a textBox.text value.
ex. below example I set the textbox.text value to a C# variable called TextBoxValue1 but I receive error this is not a valid
This is all done in Page_Load event backend code.
string strCommandtext = "Select Type.TypeName, Type.TypeDesc FROM Type Where Type.TypeName = TextBoxValue1";
Hi All,
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Please let me know where am going wrong?
Thanks in advance.
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies View RelatedI'm having difficulty passing a date parameter in a SSIS OLEDB connection to a stored procedure using SQL command with the error message "Attempted to read or write protected memory ..." and if I create a variable, I get the error "must declare the scalar variable..". Here is the OLEDB command: "EXEC dbo.mic_TGDrop ?" where ? requires a date parameter @ReportDate. Why does the call to the stored procedure fail? What would be the correct syntax of a variable to use SQL Command from variable? The SQL BOL does not cover this; is there another resource that has a simple example? Thanks.
View 2 Replies View Related
Why I can´t use the command USE with variable?
declare @banco varchar(20)
select @banco='xpto'
USE @banco
I have try in other way without success
DECLARE @banco varchar(50)
declare @SQL varchar(50)
select @banco='xpto'
print @banco
select @SQL='USE '+@banco
print @SQL
exec(@SQL)
Help me, please.
Rodrigo
KEEPS SAYING MISSING EXPRESSION:
IN THE VARIABLE EXPRESSION I'VE WRITTEN THE FOLLOWING COMMAND:
"SELECT * FROM MY_TABLE WHERE T1.DATE >= @[USER:ATE]"
I'VE CLICKED EVALUATE EXPRESSION AND IT ACCEPTS THE EXPRESSION
HOWEVER WHEN I GO TO DATA FLOW TO SELECT SQL COMMAND FROM VARIABLE IT BRINGS BACK MISSING EXPRESSION????
Hi all,
I have created a global variable and it will read the user input from a web application. How can i pass this variable into OLE DB destination SQL command so that i can retrieve the user specified table? Or is there a better way to do this?
Using SQL Server 7.0, I am trying to use a variable string called from a form to perform a simple query.
Here's what it looks like:
[after submitting a form on the previous page with a drop down list box titled "fiscal"]
dim strYear
strYear = Request.Form("fiscal")
sql = "SELECT * FROM VENDOR WHERE STATUS = 'P' AND '"& strYear &"';"
[where strYear is the following: PYMNT_DT > ''12/31/98'']
Records exist that meet this criteria. If the PYMNT_DT > '12/31/98' is hardcoded into the sql statement, 12 records are returned. However, when the variable string is used instead, no records are found. Any ideas on how this problem might be fixed?
Thanks in advance.
Sincerely,
Chad Massie
This is a really simple question. When I set my variable (the one will hold my SQL Command) property "EvaluateAsExpression=True", I don't get the option to edit the expression, I was expecting to get a little button that would open the "Property Expressions Editor" if pressed.
Am I doing anything wrong? Should I edit my SQL Command somewhere else and then Copy+Paste on my variable expression?
I need to pass a ServerName as a field to my query and I'm doing that by looping through a list of servers...
Hello everyone!
Bit of a problem executing a DTS command from a command line.
I have the following variables defined in my package:
UserVarchar1
UserVarchar2
UserVarchar3
All have a scope of Package, all of the mstrings
The command I'm attempting to run in 1 line is:
DTEXEC /FILE "C:SSIS PackagesED-CustomersPackage.dtsx"
/SET Package.Variables[User::UserVarchar1].value;"10"
/SET Package.Variables[User::UserVarchar2].value;"30719"
/SET Package.Variables[User::UserVarchar3].value;"BILLTO"
Description: The package path referenced an object that cannot be found: "Package.Variables[User::UserVarchar1].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
DTExec: Could not set Package.Variables[User::UserVarchar1].value value to 10.
Any idea why?
Thanks for the help!
I was not able to find the solution myself so here I am to ask you.
I'm using an Ole DB Source with the SQL command from variable.
My variable expression needs to look like this:
select * from dbo.fx_function (SomeDateVariable)
My sql server fx_function recieves as a parameter datetime, my variable SomeDateVariable is datetime type.
I tried all different types of cast on @User :: SomeDateVariable but I either can't evaluate the expression or I have errors trying to execute the package.
Any ideas how the expression should look like?
I'll keep trying...
I read several posts on this topic and I would like to confirm my understanding.
This question has to do with parameterizing the select statement in the OLE DB Source editor. Initially, I thought I could use Data access mode: SQL command, and somehow use a user variable in there to build my Select statement.
But in researching further, it looks like I need to store the entire SQL command in a one long string variable (let's call it A), where A is built off of another variable that has my parameter. I then use A in Data access mode: SQL command from variable.
Am I correct? And is there not a way to accomplish the samething with only one variable that is your parameter value?
It seems a bit clumsy to store the entire SQL expression in a string variable.
Using Jamie's, John's and Rafae post i have got this far.
My scenario demands me to do an incremental load. So i have followed your article and have created a one variable 'vDate' (Dataflow Task, Datetime, 3/3/2008) and another variable SourceSQL (Dataflow Task, String). I have set this SourceSQL evaluation to True and have added this;
"select * from stagingperfdata where startdatetime = "+ (DT_WSTR,10) @[vDate].
I want to call this within a OLE DB source, so i select the data access method to SQL command from variable. My variable name is visible and i am able to select it and then save and debug. I also have a derived column transformation to increment the variable vDate by one day.
The flow is successful but there is no records written to the target.
I tried the same query (available in the variable's value column) in SSMS and it is retrieving 12 records.
I went back to the Ole Db source and wanted to preview the data, but i get "Query timeout expired (Microsoft SQL Native Client)" error.
Am i missing something fundamental?
Hello All
I m trying to update a table whose col name will be read from another table.
For e.g. Table1 gives the result:
'emp1', 1, 'John'
'emp2', 2, 'Mike'
Now in the second table, i need to update the table with Col name = 'Emp1' and then from the second row (above), I need to update Col name= 'Emp2'
I need to write one Update Statement which will handle all the cases. I tried
Update Table2 set @VariableName = .......
but didnt work...
How can i do that ?
Hello.
I created a package scope variable to use as a sql command for a data
flow task. But when I click the drop down to select it, nothing
appears. Anybody else have this issue and find a solution?
Thanks,
Rich
Group,
First let me say that I'm new to SSIS, so be gentle with me.
I need to extract a limited set of data from a very large view in Oracle (I know, yuk!). The view contains millions of rows, but I only need the child matches of 343 unique keys in a one to many relationship. In pure SQL the query would look something like this.
Select proj, tn, rn, total FROM Oracle.view WHERE proj in (select distinct proj from MSSQL.dbo.projlist)
As you can see, this is an impossible query on many levels.
My first thought was to get the runtime list into a variable and use that variable as a parameter in the Oracle OleDb Source. Alas, the Oracle source will not allow me to add a parameter.
My second thought was to use a script component and build a SQL_Command string into a variable with all of my keys included. Then use the read_write variable as the SQL Command from variable in the Oracle Source. My attempts to construct such a variable expression have failed.
Any ideas would be appreciated.
RH
In the data flow task I have multiple OLE DB source task to retreive data from a cube using MDX. Below is an example of the query from sql command text field: I have a few questions on how to modify this statment to make it more robust.
1) The where clause [Calendar].[Quarter 2 (2007)] should actually be some kind of variable that will change each time
the user runs this project. So I am wondering how to make this a variable and get it into this field.
2) I had thought that I could use the SSIS variable. I have created one, but I can not figure how to get it into the field that
contains the given select statment.
3) I believe that once I get this variable part to work then I want a way to have user set this data value. Either by selecting data from a table in database or through a user interface where user enters data. I did do some resarch on creating a user interface, but I did not understand what I had to do, so if any one knows where to find a tutorial on how to do this let me know, or what they believe the best/easiest way is to get data from user to fill this where clause.
select * from OPENROWSET('MSOLAP', 'DATASOURCE=local; Initial Catalog=Patient Demographics 2005;',
'with member [Measures].[TimeDisplayName] as [Calendar].CurrentMember.Name
SELECT NON EMPTY { [Measures].[TimeDisplayName],[Measures].[Adjusted Relative Weight],[Measures].[Adjusted Case Weight]} ON COLUMNS,
({[Facility].[REGION].[NATCODE], [Facility].[REGION].[REGCODE]} *
[RIC].[CMGGRPCD].ALLMEMBERS) ON ROWS FROM [ESR]
WHERE [Calendar].[Quarter 2 (2007)]
')
Hello all,I'm writing a site with one page that uses the session variable (User ID) to pick one user ID out of a comma separated list in the field Faculty. The default parameterized query designed in the SqlDataSource wizard only returns lines that contain an exact match:SELECT * FROM tStudents WHERE ([faculty] = @faculty) The query: SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') works as I need when I hard code the query with a specific user ID into the SqlDataSource in the aspx page. It will not work if I leave the @faculty parameter in it:SELECT * FROM tStudents WHERE ([faculty] LIKE '%@faculty%') e.Command.Parameters works to replace the @Faculty with a user ID, but again, adding the single quote and percentage sign either causes errors or returns no results. I've tried several variations of: string strEraiderID = "'%" + Session["eRaiderID"].ToString() + "%'"; e.Command.Parameters["@faculty"].Value = strEraiderID;no results are returned, not even the lines returned with the default select query.How do generate the equivalent of SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') into the SqlDataSource? Thanks much!
View 3 Replies View RelatedHi,
i am using command files(.cmd) and osql utility to conneft to a database.
following is the requirement.
I have a query "SELECT top 1 au_fname FROM pubs..authors".
Can i store the value of au_fname in the command file?
Is there any work around for this.
Any help is appreciated.
Thanks.... :)
I'm looking at http://blogs.conchango.com/jamiethomson/archive/2007/03/13/SSIS_3A00_-Property-Paths-syntax.aspx and http://blogs.conchango.com/jamiethomson/archive/2005/10/11/SSIS_3A00_-How-to-pass-DateTime-parameters-to-a-package-via-dtexec.aspx trying to understand where we are at using datetime overrides in ssis from the command line. One of these articles suggests something has been fixed in ssis sp1, what part of this issue was fixed?
Can you override (from the command line) a user var in ssis whose ValueType property is datetime? Or do some of the older articles still apply, ie the user var must be string so that ssis wont create a separate user var with the same name etc etc? And if it is string, does some kind of conversion need to be done to compare it against datetime cols in t-sql inside the pkg?
I already know that the syntax is
dtexec /F Package.dtsx /SET Package.Variables[User::Var].Properties[Value];2007-01-02.
If this has been fixed, was it fixed in service pack 1, 2?
Hi
How to use a global variable of a package inside oledb command
Scenario:
Glb_Rowcount Variable
I need to use this variable value inside oledb command.
P.S: No use of stored procedures and no script component
Hi,
I have to read data from an MDB file into SQL Server. Simple, but I need to place a literal into every row. In my OLE DB Source I would use:
SELECT '001' AS col1, foo, bar FROM Table1
But the problem is that I pass my value for col1 into the package from C# using Managed DTS.
So I set up my OLE DB Source using "SQL command from variable." And I have two variables one to receive the value of for col1 (col1) and one that is an evaluated expression that has a dynamic sql statement (dynSql).
col1 is a String as is dynSql. dynSql looks like this:
"SELECT " + @[col1] + " as col1, foo, bar FROM Table1"
Now as long as I set the value of col1 to '001' that should work. Right? Well not exactly. The destination for col1 in SQL Server is a char( 3 ). But the package makes the col1 column from the source a DT_WSTR. Which causes the famed: "Text was truncated or one or more characters had no match in the target code page.".
Is there a better solution?
Thanks. Kenneth.
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
How do I use a @variable to hold on value return from an exec ('string command') statement.
Example for:
declare @OldID int
declare @cmd varchar(255)
declare @db varchar(25)
declare @OldOwner varchar(25)
set @db = 'DBNAME'
set @OldOwner = 'USERNAME'
select @cmd = 'select uid from ' + ltrim(rtrim(@db))'..sysusers where name = ' + "'" + ltrim(rtrim(@OldOwner)) + "'"
exec (@cmd)
How can I use @OldID to hold on UID return from this statement.
When I try use:
select @cmd = 'select @OldID = uid from ' + ltrim(rtrim(@db))'..sysusers where name = ' + "'" + ltrim(rtrim(@OldOwner)) + "'"
then I'm getting a error message: @OldID not declare.
Thanks.
Is it possible to use a variable to specify the filegroup in the ALTER/CREATE PARTITION SCHEME command?
I want the partition scheme to use the default filegroup for ALTER and CREATE PARTITION SCHEME. At the time the script is created, I don't know the default filegroup in the database.
My code:
declare @fileGroupName VARCHAR(50) = (select top 1 name from
sys.filegroups where is_default = 1)
ALTER PARTITION SCHEME MyScheme NEXT USED @fileGroupName
Is failing:
Incorrect syntax near '@fileGroupName'.
Q: Is it possible to use a variable for the filegroup in the ALTER/CREATE commands? Is so, what is the correct syntax?
Q: If using a variable is not possible, is there another way to specify the default filegroup?
Hi,
I'm seeing a problem with printing very long strings using the PRINT
command on a VARCHAR(MAX) variable. After a certain amount of
characters the string is truncated....it looks like the limit is at
around 8,000 characters.
Does anyone know of a solution or a workaround for this?
I'm using the following Select Command:SELECT MAX(Document) AS DOC FROM dbo.Communicator WHERE (ReleaseDate <= { fn NOW() })It shows the most current date in the ReleaseDate column - even if the date is in the future. I don't want it to show future dates. If I change the command to WHERE (ReleaseDate >= { fn NOW() }) it doesn't work at all. I only want it to return one row - the latest releases date that is equal to or less than now.Any ideas?
View 3 Replies View RelatedI have a web form that has textbox1, textbox2 and DropDownList1. Let’s say textbox one is first name, textbox2 is last name and dropdownlist1 is age. How do I write a query that will select from database table dbo.emoployee where last name = dbo.employee.lastname and all other fields are blank, I want it to return all employees with that last name. If someone types in the last name and selects the age from the drop down list then I want to return all employees where last name = dbo.employee.lastname and age = dbo.employee.age. If someone types in just the first name then I want to return all employees where first name = pub.employees.firstname? I have been trying to do this using the SQLDatasource but cannot seem to figure it out.
View 5 Replies View RelatedI have a web form that has textbox1, textbox2 and DropDownList1. Let’s say textbox one is first name, textbox2 is last name and dropdownlist1 is age. How do I write a query that will select from database table dbo.emoployee where last name = dbo.employee.lastname and all other fields are blank, I want it to return all employees with that last name. If someone types in the last name and selects the age from the drop down list then I want to return all employees where last name = dbo.employee.lastname and age = dbo.employee.age. If someone types in just the first name then I want to return all employees where first name = pub.employees.firstname? I have been trying to do this using the SQLDatasource but cannot seem to figure it out.
View 3 Replies View RelatedI currently have a webpage that allows visitors to post links to their own website. As a spam filter I want to create a scheduled task that selects repeat entries in the database under the column name domain. I already made a filter to take everything out of the link the provide and leave it with just the domain name. I tested it and it works. Now I need a SQL command to select all the rows with repeats of the domain. Look at the following table example to better understand what I mean uid x y domain1 100 110 www.spam.com2 100 120 www.spam.com3 110 130 www.homepage.com4 210 220 www.myaspspam.com5 510 560 www.myaspspam.com in this example I would like 1 and 2 to be selected as well as 4 and 5 into a dataadapter so that I can delete them accordingly.
View 2 Replies View Related im trying to write a select command that gets info from 1 table and counts 11 differnt things in it im not sure if this is even posiable but if it is could someone help this is what i got for counting all of them SELECT owner, COUNT(*) AS TotalPots
FROM Items
WHERE (Name = 'Holy Potion') OR
(Name = N'Arcane Potion') OR
(Name = N'Shadow Potion') OR
(Name = N'Fire Potion') OR
(Name = N'Kinetic Potion') OR
(Name = N'Potion of Holy Resistance') OR
(Name = N'Potion of Arcane Resistance') OR
(Name = N'Potion of Shodow Resistance') OR
(Name = N'Potion of Fire Resistance') OR
(Name = N'Potion of Kinetic Resistance')
GROUP BY owner
ORDER BY COUNT(*) DESC the 11 coloums i want are Holy, Arcane, Shadow, Fire, Kinetic, Holy Resist, Arcane Resist, Shadow resist, Fire Resist, Kinetic Resist, And Total Pots Also would like it on my Asp.net page at the bottom of the grid view to have a total row that counts all the colums up
Hello,everyone,i have a problem:(about BOM caculation)
The BOM is B--87700
has one outside service,and two children parts:z--877,and s--877
i have a table,this table which contains columns like this:
part_id description price(unit price) quatity
B--877 FD 82.36$(service price) 1
Z--877 Roughcast 2.36$ 4
S--877 the same 8.36$ 12
and i want to get a result of this:
part_id description price
B--877 FD (82.36+2.36*4+8.36*12)=192.12(just the result 192.12 is okay)
how can i achieve this target?