How Can I Find Blank Password Logins In SQL2000???

Oct 31, 2007



Hi everyone ,
i am trying to find logins which has blank password in SQL2000 . i wrote cursor to find these logins. But i cannot catch the logins.Beacuse sp_password sistem procedure does not return @@ERROR.

I can easily do it with SQL2005 (BEGIN -TRY -CATCH).

How can i catch sp_password error in SQL Server 2000??
or are there any suggestions to find these logins.
How can i find blank password logins in SQL2000???


sp_password '','','loginname'

select @@error ''' it is always ZERO





Declare @sql as varchar(255)

Declare @login as varchar(50)

Declare Cur_Login CURSOR scroll FOR

Select name from syslogins where isntuser=0

open Cur_Login

fetch next from Cur_Login INTO @Login

WHILE @@FETCH_STATUS = 0

begin

set @sql = 'sp_password '''','''',''@login'' '

set @sql = replace(@sql ,'@login',@login)

exec (@sql)

if @@ERROR <> 0

print 'Password is not blank'

fetch next from Cur_Login INTO @Login

end

close Cur_Login

deallocate Cur_Login

View 6 Replies


ADVERTISEMENT

How Do You Find Out If People Have A BLANK SQL Password?

Dec 20, 2006

Is there a script or table that I can check to find out if there are any users who have BLANK passwords?

thanks

View 3 Replies View Related

Transfer Logins From Sql2000 To Sql2005

Sep 20, 2005

Hi,

View 4 Replies View Related

Blank Password Check

Jul 19, 2007

Is there any way to check whether the password for existing sql authentication login is blank? (except trying to connect)

Where can I find information about how the passwords are stored internally in SQL Server?

View 9 Replies View Related

Blank Password Policy Problem

Oct 2, 2006

Hi all,We recently started to receive complaints about our install project notworking and giving and shitload of error messages related to SQL. Welater found out that the problem was the users we were trying to bindto we're not created because of the domain password policy featureimplemented into SQL Server 2005.After much dabbling around the SQL scripts that created the databasestructure, we came to the conclusion that only this piece of code couldcorrect our problem :CREATE LOGIN mynewuser WITH PASSWORD = '', CHECK_POLICY = OFF,CHECK_EXPIRATION = OFFThis runs perfectly fine on SQL2005, but not on SQL2000. We have beensearching for a way to have code in SQL files executed on install thatdoesn't fail to compile when run against the server and that willbypass the password policy in case it's a SQL Server 2005...Right now we are testing a feature available in MSI that can filterscripts not matching a database version, but the problem with this, isthat we are missing a lot of features that InstallShield has. In short,we need Help to fix this issue and be able to continue withdevelopment.In hopes to receive a a prompt anwser

View 3 Replies View Related

Migrating SQL Logins With Password

Feb 6, 2007

HiI need to move a couple of SQL logins to a new machine to support a3rd party application. Problem is the password is embedded in theapplication and we can't see how to change it. Does anyone have amechanism for moving a login to a new machine *without* knowing orchanging the password?TIAChloe

View 1 Replies View Related

SQL 2005 - Ignore Policy To Allow Blank Password

Feb 6, 2006

I've legacy code that requires a blank password for a SQL Server login.
This works fine on 2000 or 7.

How can you allow blank passwords on SQL Server 2005 without changing the windows policy?
Is there a stored procedure to do this?
I know you can now use CREATE LOGIN and set CHECK_POLICY to no on SQL 2005 when creating logins, but this needs to run on SQL Server 7/2000 and so its using sp_addlogin.
(NB: I can't easily change the legacy code to work conditionally on SQL Server 2005)

View 9 Replies View Related

Blank Password From Command Line Installation

Jun 24, 2006

Hi, I need blank password for user "sa" when I instaling SQL 2005 Express from command line. SAPWD=<strong password> --> SAPWD=<blank password> ?????

View 5 Replies View Related

Getting All Logins / Users With Their Password Into Other Server While Doing Migration?

Jun 24, 2015

How to get all logins & users with their password into other server while doing migration?

View 7 Replies View Related

Find Records With A Blank Field

Mar 13, 2000

I want to be able to use a query to display all the records in the 6.5 database that have no data in the STATUS field. This is the query I thought would work....."SELECT * from travel_date WHERE status="''"

But, that is not working. Can someone please help me figure out the right way to wrtie this?

I appreciate your help!

View 2 Replies View Related

Where To Find The The Allowed Users Of SQL2000

Aug 24, 2005

Hi all, I am brandnew with SQL2000, so sorry in advance forstupidities....SQL2000, SP3, running on a SBS2003-server with WindowsSharePointServices.I want to make a dataconnection (from within the LAN with InfoPath) froma client to this server. I got the error that whether the server doesnotexists (it does) or no permission. Where can I find (in SQL2000) whichusers have access to the databases ???Help is appreciated, Ger.*** Sent via Developersdex http://www.developersdex.com ***

View 2 Replies View Related

SQL Server Admin 2014 :: Find All The Inactive Windows Logins?

Jan 30, 2014

How to query in SQL to retrieve all the disabled Windows Users which are available as records(only) in the SQL Server ?

View 9 Replies View Related

Lost SQL Logins, But Still Have DB Logins - Script To Recreate SQL Logins?

Jan 21, 2007

ok, first, I know... I forgot to run a backup of the master database, and I forgot to run a script to caputure logins. Not that that is out of the way... I need to recreate the logins under the Securities tab below the databases. All the company databases have the user names and passwords assigned to them, but they are not able to login, because they are not able to authenticate to the SQL server first.

Is there a script that someone has that will copy the company database security info for the users and recreate them in the SQL security tab?

I know that I can rebuild them manually, but I need to delete them first in the application software, then delete them from the databases, and then recreate them in the application software... and as simple as that sounds... it is a slow moving process.

Any assistance would be greatly appreciated.

Thanks,

John

View 3 Replies View Related

How To Find User Login Password

Feb 25, 2013

Earlier one of my team member has created a user login and password but forgot the password after few days and now we need to know the password of that login.  Some of the application are using this login so we can delete and create a new login with the same name hence is there any possibility or script to find out the password of the existing login.

Note: The login is not 'sa'

View 9 Replies View Related

How Can I Find When A Password Is Close To Expiring

Mar 2, 2007

I am using VB6 with SQL server 2005. In order to implement password expiry properly I need to know how to find out when a user's password is due to expire so that I can output a message to prompt him to change his password. How can I interrogate this information?

View 1 Replies View Related

Help Needed Convert A Blank In Char To Blank In Float

Apr 29, 2008

Hi,

I receive blanks for a column called value and i need to represent it as a blank or NA into a colum whose datatype is float in the datawarehouse.

how is this possible because in current schenario a blank is being converted to 0
which is not the right thing.

i would like to retain the blank in conversion from char to float ,

please explain me if it can be done or how to overcome this issue.

Thanks

View 1 Replies View Related

Export Logins To Server With Already Existing Logins

Jul 17, 2001

Hello,

I would move a Database to another server. I try to use DTS but I have problems with this process because DB have big tables, I think. I try to use DETACH and ATTACH procedures but logins doesn't export. And more, in new server there are already logins from another DBs.

What's the best way to solve this problem?
Please, help
Thanks

View 3 Replies View Related

Moving DBs From SQL Server Logins To Windows Logins

Apr 3, 2007

I am a systems analyst and work with an app that runs against 2 SQL Server DBs. Though I have some familiarity with SQL Server and SQL, I am not a DBA.

The app executable is tied to a Windows service.
When we install the app, we run a process that builds 2 dbs to include:
Tables, indexes, stored procedures, views and user accounts.
SQL Server is set up for mixed mode authentication.

Normally, the dbs run off the local db user accounts which are tied to local logins with the same names.
We have a client that wants to remove our standard logins so that they can run on only a Windows login.
I know I should be able to tie the db users to a Windows login.
And I can do the same for the service.

But I am at a loss as to how to get this done.
How do you associate db users with a Windows login?
When I have tried sp_change_users_login I get an error that the Windows login does not exist. (Though I have added the Windows account to the DB.)

Hope this all makes sense.

View 2 Replies View Related

Sql2000 && Sql2005, Want Localhost To Use Sql2000

Sep 17, 2006

 i have sql2000 & sql2005 on the same machine. I am unable to register my localhost in sql2000, get an access denied error. How can I make my localhost use sql2000 database?

View 1 Replies View Related

Data Access :: How To Recover Forgotten Password When Remember Password Option Checked

Jul 24, 2015

I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.

View 3 Replies View Related

SQL Server Agent Job Will Not Retain Package Password (encrypt Sensitive With Password)

Apr 1, 2008

I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.

I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.

This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..

The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E

and I get

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF

although the same code executes perfectly from a command prompt.

Please does anyone have any experience with a similar problem and if so, how did you get round it?

Thank you

View 9 Replies View Related

SQL 2005 SP2 - Windows 2003 Ent SP1 - Password Does Not Meet The Password Policy DLL

Jun 18, 2007

I am receiving the following error message when attempting to create a new SQL Authenticated login id.



Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)



I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.



CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON



All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.



Any ideas as to a root cause?

View 5 Replies View Related

The Sa Password Must Meet SQL Server Password Policy Requirements.

Jun 30, 2007

I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:



TITLE: Microsoft SQL Server 2005 Setup
------------------------------

The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61

------------------------------
BUTTONS:

&Retry
Cancel
------------------------------


I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.



Thanks,



Amilcar

View 6 Replies View Related

Migrate SQL2000 To SQL2000

May 13, 2008



i am in the process of Migrating SQL 2000 to my new SQL2000 server i want to know the what would the best way for me to migrate one SQL server to another SQL server on the same network and rename the new server to the old server and bring it up for use in our ecommerce website.

View 10 Replies View Related

Remember My Password Is Forgetting Password

Mar 11, 2008

On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?

Thanks,

Brian

View 1 Replies View Related

Export Username / Password To CSV File To Test SP To Output Username / Password

Jun 2, 2014

I put this together to export the user name /password to a csv file to test my SP to output the user name/password.

DECLARE @user_name varchar(50)
DECLARE @psswrd varchar(10)
SELECT @user_name ,@psswrd
FROM ngweb_bulk_enrollments
EXEC master.dbo.xp_cmdshell 'bcp NGDevl.dbo.ngweb_bulk_enrollments out C: est.csv -Sserver1 -T -t, -r
-c'

This works but I don't get the headers in the file. How can I include the headers?

View 7 Replies View Related

Equivalent To MySQL's Password() Function? (was MySQL To SQL Server And Password())

Mar 3, 2005

I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:


PHP Code:




 $sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")"; 






Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.

View 7 Replies View Related

Anything That You Find In SQL Object Scripts, You Can Also Find Them In System Tables?

Jul 26, 2005

I tried all the INFORMATION_SCHEMA on SQL 2000 andI see that the system tables hold pretty much everything I aminterested in: Objects names (columns, functions, stored procedures, ...)stored procedure statements in syscomments table.My questions are:If you script your whole database everything you end up havingin the text sql scripts, are those also located in the system tables?That means i could simply read those system tables to get any informationI would normally look in the sql script files?Can i quickly generate a SQL statement of all the indexes on my database?I read many places that Microsoftsays not to modify anything in those tables and not query them since theirstructure might change in future SQL versions.Is it safe to use and rely the system tables?I basically want to do at least fetching of information i want from thesystem tables rather than the SQL script files.I also want to know if it's pretty safe for me to make changes in thesetables.Can i rename an object name for example an Index name, a Stored Procedurename?Can i add a new column in the syscolumns table for a user table?Thank you

View 4 Replies View Related

Problem: Find All Table Names In Db And Then Find

Jun 12, 2008

I have 3 database say
db1
db2
db3

I need to setup a script to read all the table names in the database above and then query the database to find the list of Stored Procedure using each table.(SQL Server)

View 5 Replies View Related

Set Default To Blank

Apr 6, 2005

I am writing a two step process where the record is created and half of the fields are populated. The second step will populate the remaining fields. Between steps they will run queries against the table and the empty fields are <NULL>.When the field is <NULL> it won't return data on "WHERE Field LIKE '%'". I could just pass "" as data to the remaining fields however since MS SQL allows you to set a default value on a field. Is it possible to set the default value to a blank instead of <NULL>. This would help keep my code a little more streamline.
Or is there an easy way to write a fuzzy search that will include <NULL> fields.
Thanks

View 6 Replies View Related

Blank Record

Feb 16, 2007

Hello,

How do I get a record that has no specific data? I got an error using this

rs.Open "SELECT id, letter, consonant FROM alphabet where letter= "" order by id",conn,1,3

View 5 Replies View Related

How To Display Blank?

May 4, 2004

Hello, everyone:

By default, SQL Server display "NULL" if there is no data value. How to display blank instead of "NULL"? Thanks a lot.

ZYT

View 3 Replies View Related

How To Check Zero Against Blank

Oct 31, 2013

This below code is saying 0 is equal to space .How can I avoid this situation.It is saying 'a is blank' but i have assigned var @a as a 0.

DECLARE @a int =0
IF @a =''
BEGIN
SELECT 'a is blank'
END
ELSE
SELECT 'a is not blank'

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved