I need to find out when the data file and transaction log file is full. Is there any stored procedure that will let how much space left. We don't want to set Autogrow for the files.
Thanks,
Rau
Thanks in advanace for taking the time to read this post.
I am using MSSQL 2005 and have created a function that allows me to use regular expressions in my SQL queries.
My question is I have a pattern buried in a field of misc data that I need to pull out just that pattern and discard the rest of the data. Here is the Regular Expression I am using
select field1 from table1
where dbo.RegExMatch (field1,'[a-zA-Z]{4}[0-9]{6}[a-zA-Z]{2,4}')=1
This returns all values in the field that match the expression. What I want to do now is remove all data from the field on the left and right of the expression that does not match the expression. How would I accomplish this without reading through the 200k+ records and writing rules for every exception I run across?
so I could have Gar b/a ge 'THE GOOD DATA' m/or1 ba4d da....ta. All I want to do is return 'THE GOOD DATA'
I'm new to the DBA world, and have no one else in the company to look up to. Does anyone know what I might need to check out or do when the Data File Size is 204% full? Or is this not necessarily a bad thing?
I'm getting this from a Diagnostic tool I have.
The number of tables is 148
Data file size 35,941 MB
Data Size 26,549.92 MB
Index Size 177,130.02 MB
Log File Size 5.05 MB
Thanks,
I got below error :
Could not find allocate space for object 'tablename' in DB, because the primary file group is full
Upon investigation I found :
datafile is reached it's maximum size
DB Size space allowcated 197 MB, space free 20.69 MB
DB mdf 194880 KB, ndf 6272 KB
It's production server, please let me know how to proceed now?
question 1:
i found that database log file can contain more records after performing backup database statement.
for example:
i create a database and limit the log file to 2mb. then i create a table and insert data.
If i backup the database before i insert data , the database file can contain 192 records unitl the log file is full.
If i don't perform the 'backup database' statement.
The 'dbcc sqlperf(logspace)' indicate the utilization ratio is less than 40% after inserting 192 records
why?
I list my code:
Code Snippet
create database db_test
on primary
(
name=db_test,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test.mdf'
)
log on
(
name=db_test_log,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test_log.ldf',
maxsize=2mb
)
go
backup database db_test to disk='db_test.bak' --- if i don't execute this line, log file can contain a lot of record
go
create table db_test..table1(col char(8000))
--insert data to fill up the database log
declare @n int
set @n=0
while @n<192
begin
insert into db_test..table1 values(replicate('a',8000))
set @n=@n+1
end
question 2:
i create a database and limit the log file to 2mb. Then i create a table and insert data in an endless loop.
After the inserting operation executing for a while, the 9002 error occurs, indicate the log file for the database is full.
But the 'dbcc sqlperf(logspace)' command indicate the unilization ratio is low, and log_reuse_wait_desc in sys.database is 'CHECKPOINT'
And I can insert data , and i'm sure the state of log_use_wait_desc is 'CHECKPOINT'.
As i known, the checkpoint can't truncate log under full recovery model. Only the back log operation can truncate the transaction log.
So log is not full, why 9002 error is encounterd. and why the log_reuse_wait_desc return 'CHECKPOINT'?
I list my code:
Code Snippet
create database db_test
on primary
(
name=db_test,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test.mdf'
)
log on
(
name=db_test_log,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test_log.ldf',
maxsize=2mb
)
go
create table db_test..table1(col char(8000))
--insert data to fill up the database log
declare @n int
set @n=0
while @n<>-1
begin
insert into db_test..table1 values(replicate('a',8000))
end
any suggestions?
thanks in advance.
When you create data files and filegroups, you specify a size. Myquestion is -- how do you know how full they are? Is there a storedprocedure for that?
View 3 Replies View RelatedHello,I have to implement a method FindProduct, which takes a parameter search query and returns product based on the query.I think i can use full text search here but don't know how. I tried to read a various way but could not figure out. 1
2
3 [DataObjectMethodAttribute(DataObjectMethodType.Select,true)]
4 public DataLayer.shopDBDataSet.ProductsDataTable GetProducts()
5 {
6 return Adapter.GetProducts();
7 }
8
9 [DataObjectMethodAttribute(DataObjectMethodType.Insert, true)]
10 public bool AddProduct(string UPCCode, string Description, string Size)
11 {
12 shopDBDataSet.ProductsDataTable products = new shopDBDataSet.ProductsDataTable();
13 shopDBDataSet.ProductsRow productRow = products.NewProductsRow();
14
15 productRow.UPCCode = UPCCode;
16 productRow.Description = Description;
17 productRow.Size = Size;
18
19 products.AddProductsRow(productRow);
20 int rowsAffected = Adapter.Update(products);
21 return rowsAffected == 1;
22 }
23
24 [DataObjectMethodAttribute(DataObjectMethodType.Delete, true)]
25 public bool DeleteProduct(string UPCCode)
26 {
27 int rowsAffected = Adapter.Delete(UPCCode);
28 return rowsAffected == 1;
29 }
30
31 [DataObjectMethodAttribute(DataObjectMethodType.Select, false)]
32 public DataLayer.shopDBDataSet.ProductsDataTable FindProducts(string searchQuery)
33 {
34
35 throw new System.NotImplementedException();
36
37 }
38
You can see the method at line number 32. I could not figure out the way to implement it although i know full text search is a good choice.I have following table adapterGetProducts(); GetProductsByManufacturerName(); GetProductsByManufacturerID(), and GetProductsByUPCCode();Product table contains UPCCode, Description, Size columnsBut i need to get the product which returns the description containing search query. I know some of you have done something similar to this. Could you please guide me....Thanks in advance....
I have a stored proc that runs through my databases doing transaction logs. Currently it uses database names but this keeps being changed as a database will be added without me knowing. Next thing the transaction log job is goosed.
I really need something along the lines of select db from sys???? where mode = 'Full'
Any help appreciated.
MPM
Hi,
I have the fields like this.
Session1 Session2 Session3 Session4----------------------------------------------------------------------------------------- SQL Server-Part1 SQL Server-Part2 ASP.Net CSS
C# SQL Server-Part3 ASP.Net Javascript
I have set the Full-Text to all the columns. For searching i wrote the below query
SELECT * FROM <TABLE NAME> WHERE CONTAINS(*,'"SQL Server-Part1"')
My Result expectation is: The First Record should come. But the result of the query bring the two records. It see the "SQL Server" string also. I need to find the exact word. How to do it? Please answer me as soon as possible. Ganesh.
Hi all,
We have a table that is full text enabled and it is working fine, but the full text search doesn't returns any record for the following case
select * from let_catalog_search where contains(search_field,'"Bulk Process 1*"')
even though there exist records that satisfy the condition in the table,
the record that i am talking abt is "bulk process 1 with price bp100-ilt1-00200136 bp100-ilt1"
If I remove the last 1 from the search string i get lot of records, Can anybody help me out.
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
Hi,
I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:
LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?
Thanks,
Bobby Fu
We set the database to : automatically grow file, unstricted file growth, grow by 10%.
As I understand it will automatically grow, why we recieved error message like primary file full.
Hi,
Iīm working with a sql server 2000 bd and i have a bd with simple recovery model. Each day i have the next error:
"The log file for database x is full. Backup the transaction log for the database to free up some log space"
I tried to limit the transaction log file to 500Mb but then I have this error. I have done the reduction manually of transaction log file but the next day i have got the same error. If i donīt try to limit, this file grows a lot of (1GB) and then i havenīt got enough disk space. Can you help me, please?
Thanks a lot.
Memupi
Am working with SQL Server 2005..I am trying to shrink the log file of the database.. Apparently, the name of the database, log and mdf is the same.
Used this code
USE gprddevelopment
GO
DBCC SHRINKFILE(<gprddevelopment>, 1)
BACKUP LOG <gprddevelopment> WITH TRUNCATE_ONLY
DBCC SHRINKFILE(<gprddevelopment>, 1)
GO
[code]....
WHAT IS MSDB LOF FILE IS FULL?PLEASE HELP ME ON THIS ISSUE
View 1 Replies View RelatedI have set the initial size of the log file for a database to 1M, themaximum size is unrestricted, and the increase rate is 10%.However, when I attempt to delete thousands of rows, the error is stillreported that the transaction log file is full. Why can't the log fileincrease automatically?*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
View 3 Replies View Related
My Tempdb log file is getting full very frequently. I could see that tempdb log file is not getting truncate automatically since checkpoint is not occuring as execpted.
If a shrink the tempdb its getting truncated immediately and releasing the full occupied space.
So i come to an conclusion that auto checkpoints are not happening even though the tempdb is in SIMPLE recovery model.
I search in KB and could find the article related to this error.
http://support.microsoft.com/kb/909369/en-us
I would like to get it confirmed is the article described is the same issue i am facing. Also if you could let me know the hot fix details for this, that would be great.
event log file is full
i am new to visual studio 2008, but comprehend pretty well. (i use to steal code from .bas files and whatnot in 5th grade in vb4 for aol ''progz'') anyway, all i wanna do is create a simple single form window as my first project with vs 2008. i have a huge list of movies, and i would like a form to help me list what titles i have, and their location (friends house, cd book 1, book 2, movie tower, etc.) and i would like to be able to add to the list, delete, edit location, from my form. right now i got as far as designing my interface, and started to add a database. i cant even get pass that because..
i goto add item from my menu bar..
add item..
local database..
then the configuration wizard comes up and says an error occured while retrieving the information from the database:
the even log file is full.
help???
Weird. I have an Agent job that populates some warehouse data every night. It's been working fine for over a year. Then it fails with a message that thePRIMARY file group is full. The database is set to Simple recovery, automatic, unrestricted growth by 10% for both the log file and the data file. The drive it's on has 96GB free. The data file is 1.5GB and the log is 2MB and there's not very much fluctuation in the amoutn of data going into it.
Anybody have an idea why that would happen?
Thanks for any insight,Pete
Hi folks,
I got a message that 'Could not allocate space for object '(SYSTEM table id: -732777483)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
Connection Broken'
Can you tell me how to solve this problem?
Thanks in advance.
Mike.
My logfile has grow the disk full - the logfil is 25 gb and I have 4 gb free.
I can't shrink the log fil !
Can I set the log file to null ??
I have backup my datafil successfully!
Help!
I am receiving the below message however when going into my database properties and going into 'File' it's set as either unrestricted growth for the log files or 2097152MB limit and the log files are only taking up about 3gigs.
Could not allocate new page for database. There are no more pages available in the file group.
Database log file is full. Back up the transaction log for the database to free up some log space.
Could not allocate space for ojbect in database because the filegroup is full.
how I can resolve this and give it more space?
there is a sql job that failed yesterday. This job calls a store procedure. This store procedure doesn't use any temp table. But there are lots of updates and inserts clauses.
application log shows:
Error: 9002, Severity: 17, State: 2
The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space.
----------------------------------------------------------------
tempdb.mdf 1.37gb
templog.ldf 19.6 mb
these files are located on D: drive and D drive has 52gb free space
databasename : tempdb
database_size: 1422.00 mb
unallocated space: 1403.60 mb
----------------------------------------------------------------
anyone to fix this?
i used "backup log tempdb with truncate_only" But i dont know if it truncated the log file?
how do i fix this problem.
Primary file group is full for one user db
This is production server
Total db size is 132186 MB
data file is 12000 MB, set automatically grow
and restrict file growth is 121024 MB
Now there is 30 GB space on drive
I have added space to file 3 times(1GB, 10GB, 3 GB) and incresed restrict file growth also(5GB). database is in simple recovery mode.
stille I am getting above error, pleasee let me know how to proceed now?
HiI am getting this common error once or twice a day:Error: 9002, Severity: 17, State: 2The log file for database 'tempdb' is full. Back up the transactionlog for the database to free up some log space.provided......1. My log file drive has more than 20 GB free out of 30 GB2. Both data file & log file has default setting on unrestricted filegrowth by 10%3. Currently we moved from SQL 7.0 to SQL 2000 & the load in the userside also doubled4. We can't do the temporary solution like restarting the server orSQL service, because the application is a real time system with muchless manual interaction.Thanks in advance.RegardsSeni
View 1 Replies View RelatedDear SirI have problem which I am describing below:-In my databse , size of Data file is 40 MBsize of Log file is 4158 MBwhich is causing the size of my database so hugewhy this log file is so huge ?How I can control it, I have already set Parameter for Data and Log filei.eUnrestricted Growth and Grow Automatically 10-PercentI want to control Log file Size.Regard'sVineet Bisht*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies View RelatedHi there,I've just run some DTS packages on my test sqlserver (Which has limitedhard disk space and memory) and all the tasks have failed, due to'PRIMARY' file group is fullIs there a query or script I can run to resolve this problem??M3ckon*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View Relatedhi,my sql database log file has been fulled recently ..... becuasethere are 55 millions records in main 3 tables .... so how i can emptylog file ...i don't want to attach new log file or save any pervious log info.....thanks for helping me ... and my company ..Abdul SalamSr. DBA + ProgrammerXebec Groups of Business.
View 2 Replies View RelatedPrimary file group is full for one user db
This is production server
Total db size is 132186 MB
data file is 12000 MB, set automatically grow
and restrict file growth is 121024 MB
Now there is 30 GB space on drive
I have added space to file 3 times(1GB, 10GB, 3 GB) and incresed restrict file growth also(5GB). database is in simple recovery mode.
stille I am getting above error, pleasee let me know how to proceed now?
I got below error :
Could not find allocate space for object 'tablename' in DB, because the primary file group is full
Upon investigation I found :
datafile is reached it's maximum size
DB Size space allowcated 197 MB, space free 20.69 MB
DB mdf 194880 KB, ndf 6272 KB
It's production server, please let me know how to proceed now?
Customer site has detached their database and deleted the .ldf file and reattached because they want to decrease the log file size. They set their log size to restricted file growth and 5mb. After about 20 minutes they started getting "Transaction log is full" so I had them up the transaction log to 50mb. After about another 20 mins everyone on the network started getting errors saying that data cannot be added because the PRIMARY file group was full ("Could not allocate space for object TrussLumber in Database ATP because the primary file group is full").
There is plenty of disk space so I know thats not the problem. And they can add data to other databases, so I cant imagine what could possibly be causing this....Can anyone help me out?
Thanks!
Craig
I have several file in .doc, .xls, .pdf and would like to know if SQL Server can do a full-text indexing on these files? These are files are stored on different locations in th harddisk.
eg.
c: empmywork.doc
c: empscheduleschedule1.xls
c:showroomdatasheet1.pdf