How Can You Get Current Stored Procedure Name Via T-SQL?
Feb 7, 2008Is there anyway we can get current stored procedure name using T-SQL?
View 12 RepliesIs there anyway we can get current stored procedure name using T-SQL?
View 12 RepliesHi,I have a stored procedure that needs to know the name of the tablefrom which it is called. If you are familiar with a "this" pointer inJava or C++, that's very similar to what I need. I know I can usedb_name() to retrieve the database name, but how do retrieve the tablename?Thanks,--Michael
View 6 Replies View RelatedHi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi everyone,How can I retrieve the current identity used in a procedure from atrigger.What I am trying to do is:The procedure takes a @username (nvarchar) as a parameter, and theprocedure identifies the @username's identity and tries to delete theidentity's row. An Instead Of trigger fires, and updates the specificrow.But how can the trigger identify the targeted row?Which built-in function can I use?Thanksgardmt
View 3 Replies View Relatedi need to know the name of the current database in variable
like "Northwind"
so i can use it inside PROCEDURE
tnx
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I've this query
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
Let's say, current date is 8 AUG 2005 and current time is 2045
So, i will get
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
206 | 8/1/2005| 1950 | 88
...
...
207 | 8/7/2005| 1845 | 77
208 | 8/7/2005| 2255 | 77
209 | 8/7/2005| 2140 | 77
Can someone can show me to filter data between
t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND TIME>=CurrentTime
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101) AND TIME<=CurrentTime
If current date is 8 AUG 2005 and current time is 2045, so the result shown as follow
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
...
...
207 | 8/7/2005| 1845 | 77
I only have this query,
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)
lack of idea to put the TIME condition.
Plz help me..
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedI have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah
Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View 1 Replies View RelatedI need help with creating a query that compares the current date with a stored date field. If the difference between the two dates is greater or equal to 5 days for example, I need to be able to return these records. I am not sure if this can be done through a query alone but any help and suggestions would greatly be appreciated. Thanks in advance.
View 4 Replies View Related Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005
Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End
oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">"@CatId"</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;
gdvCategories.DataBind(); <<--- Error occured here
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
View 9 Replies View RelatedOn SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
Something like this:
CREATE PROCEDURE TestHardDisk
AS
BEGIN
DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
OPEN CURSOR HardDisk_Cursor
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space
WHILE @@FETCH_STATUS = 0
BEGIN
...
END
END
I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View RelatedFor some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave