I'm using the query desinger in ASP.NET , however the number of records
in the resultset are not displaying, so I cut and paste it into Query
analyzer which is silly.
How do I set this in the output window, or result grid?
Thanks Moe
I would like to run a SELECT statement using the SQLCMD, however, I do not like the count of records be displayed after the execution. How do I do that?
Thanks in advance.
I've got a stored procedure that processes a TON of records...
What I would liek to do is to write a row to a "progress" table which shows how many rows have actually been processed.
I have a simple counter defined in the procedure:
SET @COUNTER = 0
Each time the procedure loops through, it increments by 1:
SET @COUNTER = @COUNTER + 1
What I would like to do is write rows to a PROCESS table which would reads:
PROCESSED 1000 rows
PROCESSED 2000 rows
PROCESSED ...... rows
etc.
I have a slight idea how to pull this off, but not sure about the whole even number thing by 1000.
If anyone has any insight it would be greatly appreciated!!
Thanks in advance!
Hello,
I have two tables, Promotion and Promolocation. The Promotion table is used to set up promotions or sales, and consists of a PromoID, StartDate, and EndDate. Each PromoID is referenced in the Promolocation table, which is used to assign items to a promotion for various locations or stores. The Promolocation table consists of PromoID, LocID, SkuID, PromoPrice, and DiscLevel.
There are times where an item or SkuID will exist in more than one promotion, however, our application is currently not intelligent enough to determine which promotion to use, so it sets the active promotion based on the StartDate being before other promotions' StartDate and the EndDate being after other promotions' EndDate.
I want to find all promoid's where a sku exists in more than one promotion. I want to signify which promotion is active, using 1 as the first active promotion, 2 as the next active, 3 as the next, etc. To determine which promotion is the first active promotion, the StartDate must be before any of the other promotions' StartDate, and the EndDate must be after other promotions' EndDate. If the promotions' StartDate is after the other promotions' StartDate but not before the other promotions' EndDate, and the EndDate is before or on other promotions' EndDate, then that's the second active promotion. If the StartDate is the same as other promotions' StartDate, but the EndDate is before other promotions' EndDate, then that's the third active promotion.
For example:
PromoID StartDate EndDate
------- --------- -------
PROMO1 1/1/2004 1/1/2006 (1st Active Promotion)
PROMO2 2/1/2004 1/1/2006 (2nd Active Promotion)
PROMO3 1/1/2004 12/1/2005 (3rd Active Promotion)
Here's a query I am using to display all active promotions:
select
pl.promoid,
pr.startdate,
pr.enddate,
pl.locid,
pl.skuid,
pl.promoprice,
pl.disclevel
from
promolocation pl
inner join
promotion pr
on
pl.promoid = pr.promoid
where
pr.enddate >= getdate()
Thanks for your help.
D
I have a column in the table which contains below values
Range
XXXX100
xxxx101
xxxx102
...
xxxx1020
below values are strings. I tried using below query but it does not return all values in the range.
Select * from table where Range Between 'XXXX100' AND 'xxxx1020'
May be in need to extract the number to display the values in given range.
Hi,
I am facing with the following problem.
I am using bar chart to display my report.
My MDX query is as follows:
SELECT
NON EMPTY { [Measures].[SUM_COUNT] } ON COLUMNS,
TopCount ( Filter ( {[DIM].[NAME].[NAME]}, [Measures].[SUM_COUNT] <> 0 ) , 10, [Measures].[SUM_COUNT] ) ON ROWS
FROM
[USAGE]
where <criteria>
I want to show the topmost 10 records. For some criteria I get the results in the chart.
But for some criteria or say for wrong criteria, there are no records. In such a case the X-axis contains all values for {[DIM].[NAME].[NAME] and value for the Y-axis is all 0. Its kind of blank report it will restrict to 10 records.
In such a scenario I want to show a message to the user saying "No records found", which I have set in the No Rows property of the chart.
If I remove the TopCount clause then I get the above message, which is obvious.
So how do I acheive the same message but at the same time limiting the records to 10?
How can I acheive this in my scenario? Can something be done at the query end?
any help is appreciated.
Thanks in advance!
I have a new installation of SQL Server 2000 Dev Edition on a Win2K3 Standard Edition Server that I used for development. I just set this machine up in th last week and installed all Win2K3 patches and then installed SQL2K and SP3a. I have a single named instance. I just noticed today that I cannot view table data or use the Query part of EM. When I right click a table and select Open Table->Return All Rows it gives me an error dialog "An unexpected error happened during this operation". While the EM is diplaying this dialog the EM screen looks like Internet Explorer and says "Action Canceled - You might not have permission to view this directory or page using the credentials you supplied." I believe that this is a EM issue as I cannot view table content on other remote server. ANy ideas? Might this be an IE security patch disallowing some connectivity ?--Frank--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedGood day!
I just can't figure out how I can display only the top record for the duplicate records in my table.
Example:
Table1
Code Date
01 10/1/05
01 10/2/05
01 10/3/05
02 9/9/05
02 9/9/05
02 9/10/05
My desired result would be:
Table1
Code Date
01 10/1/05
02 9/9/05
Thanks.
Im trying to get query by selecting the month from dropdownlist and display the records .by using the below query I need to enter the date in tecxtboc then it will show the output
select Standard, Total, MonthName
from (SELECT Standard, COUNT(Standard) AS Total,
datename(month, ReportDate) as [MonthName]
FROM CPTable where
ReportDate >= @ReportDate
[Code] .....
Hello,
I am developing some reports for an ASP.NET solution, but my IDE does not display the design view of the reports. Instead, it only displays the XML definition even when I click View Designer. Yesterday the reports showed up correctly, and I know that the design view is there. Is there a setting that has been changed somewhere?
Hi,
ive a table of over 90,000 records . is ther any method for restricting the number of records returned by a SELECT query
i want to implement a query system which will give me the first 50 records, next 50 ,... and so on
can ne body help ?
I am trying to return the number of records found by the query but keep seeing -1 in label1. This query should return many records.
sub findcustomers(sender as object,e as eventargs) dim connection1 as sqlconnection=new sqlconnection(...) dim q1 as string="select * from tblcustomers where store='65'" dim command1 as sqlcommand=new sqlcommand(q1,connection1) dim a as integer command1.connection.open() a=command1.executenonquery() label1.text=a.tostring() command1.connection.close() end sub
What am I doing wrong?
What I would like to do is to have a TSQL Select return the number of records in the Result as if TOP (n) had not been used. Example:I have a table called Orders containing more than 1.000 records with OrderDate = '2015/07/21' and my client application has a threshold for returning records at 100 and therefore the TSQL would look like
SELECT TOP (100) * FROM Orders Where OrderDate = '2015/07/21' ORDER by OrderTime Desc
Now I would like to "tell" the client that only 100 of 1.000 records are shown in the client application grid. Is there a way to return a value indicating that if TOP (100) had not been used the resultset would have been 1.000. I know I could create the same TSQL using COUNT() (SELECT COUNT(*) FROM Orders Where OrderDate = '2015/07/21' ORDER by OrderTime Desc) and return that in a variable in the SELECT statement or even creating the COUNT() as a subquery and return it as a column, but I would like to avoid running multiple TSQL's. Since SQL Server already needs to select the entire recordset and sort it (ORDER BY) and return only the first 100 the total number of records in the initial snapshot must somehow be available.
Hi,
I'm using SqlDataSource control.
Is there a way to know how many records a query has returned?
SQL query to understand the names of all the available tables , number of records in these tables and size of these tables?
View 4 Replies View RelatedWe have some requirement in PowerBI reports. Here we have a table and having Date, Events columns. Below is the sample data..we are creating a measure to calculate the average of the event count for month.We need a measure for calculating Average of Event count per month= sum(Events for a month)/numberofdays in the month.Example for January month : sum(343423)/31 (31 number of days in January)
When we write this measure using DAX query in Excel we are getting semantic error.Tried sample formula : Average:=SUM([Events])/EOMONTH([EventDate],1)
writing this DAX command for measure.After having this data ready, we are creating PowerBI reports on this data.
declare @table table (
ParentID INT,
ChildID INT,
Value float
)
INSERT INTO @table
SELECT 1,1,1.2
[code]....
This case ParentID - Child 1 ,1 & 2,2 and 3,3 records are called as parent where as null , 1 is child whoose parent is 1 similarly null,2 records are child whoose parent is 2 , .....
Now my requirement is to display parent records with value ascending and display next child records to the corresponding parent and parent records are sorted ascending
--Final output should be
PatentID ChildID VALUE
33 1.12
null3 56.7
null3 43.6
11 1.2
null1 4.8
null1 4.6
22 1.8
null1 1.4
I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies View Related INPUT
TIME action OUTPUT
17:42 SELL 1
17:43 BUY 1
17:44 SELL 1
17:45 SELL 2
17:46 SELL 3
17:47 BUY 1
17:48 SELL 1
17:49 SELL 2
17:50 SELL 3
17:51 SELL 4
17:58 SELL 5
Here u will see the INPUT and OUTPUT.
I have table INPUT. I want to display OUTPUT as RowNumber
I have a query similar to below
case when matrix = 'seven' then '07'
when matrix = 'eight' then '08' else '00' end from table
The output displays only '7' instead of '07' and so for eight also.
Hi, All!
Can I use Visual Studio 2002 for creating deployment for SQL Express
2005 (like MSDE Deployment toolkit) or it is possible only with VS
2005? I need to create installer, that installs SQL Express 2005 and
creates DB (executes sql file). How can I do it better?
Thank you!
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Where - in SQL Server Profiler - can I see the port number that someone has used to connect to a database?
e.g. given the connect string "tcp:MACHINE1INSTANCE7,3045" - where in Profiler does it tell me that the connection is using port 3045? I looked at "audit login" and "existing connection" but I don't see a port number...
Any other SQL/Windows tools that I can use to monitor connections to databases on specific ports?
thanks
1. how to show page number & total page number in report body?
2. how to show total records number?
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.
I am using VisualStudio 2005 and have Access 2007. I have two databases located on two different remote hosted Sql 2000 servers. Is there any way to copy a table from one of these databases to the other database, both data and structure?
Thank you
Hello,
I am working on a project that displays images. Before you can get to the image, you have to select a category that the image may be in. After that, you select the sub categories. I am trying to display a count of the number of records that the subcategories contain. Here is an example:
The user can make a selection from the categories listed below:
Geographic Area
Time Period
Topic
Record Type
If the user selects time period, he/she is taken to a list of subcategories. I would like to display the subcategories with a count of the number of records that will be displayed if it is selected. Listed below is an example of what this would look like:
Colonial (10) -----the number in parenthesis is the number of records that will be displayed if selected------
Gilded Age (12)
Revolutionary (9)
Progressive Era (22)
Is there a way to display the number in parenthesis using ASP.Net and SQL Server 2000? Any clues will be greatly appreciated.
Thanks
I'm stuck on converting a datetime field to Int. Basically, one of the fields in the select returns the datetime of a journey. However I need to be able to add up the number of days for a specific person who done that journey, e.g. it will return 21/08/2014, 22/08/2014 etc...
I then need to total up the days as a new field to display the number of days.
Can you do this by converting a datetime to int then use COUNT on the int?
Do anybody know how can I find or display to the current SQL server 2005 record number (eg. 10 of 1600) on a VB 2005 form label. The BindingNavigator on the form has been deleted. Thanks.
View 6 Replies View RelatedI wrote a Scalar UDF in SQL2005 that returns an integer. I want to be able to display this integer in a ASP.Net 2.0 web page. I typically use a DAL for all data so I added an ObjectDataSource as a Qeury that contains only the UDF. How do I easily display the value in a Label Control or?
I have tried to use a Repeater with a label, a Formview with a Label, all to no avail. Any suggestions?
How to limit number of rows displayed in a report, i' am using report project in Visual studio 2005 to design my reports
How to use page navigation once i deploy the report on to report server..?
A SQL Server 2005 stored procedure expects a parameter UserID depending upon which it retrieves the no. of records & OrderIDs corresponding to the UserID from a DB table (note that OrderID & UserID are two of the columns in the DB table). So for e.g. consider a user whose UserID=6 & the DB table has 3 records where UserID=6. In other words, there are 3 OrderID records of the user whose UserID=6, say, OrderID=8, OrderID=17 & OrderID=29. The stored procedure will finally return 2 columns - the OrderCount (which is 3 for UserID=6) & the OrderID (which will be 8, 17 & 29 for UserID=6). This is the stored procedure:ALTER PROCEDURE dbo.OrderCount @UserID intASDECLARE @OrderCount intSET @OrderCount = (SELECT COUNT(OrderID) FROM NETOrders WHERE UserID= @UserID)SELECT @OrderCount AS OrderCount, OrderIDFROMNETOrdersWHEREUserID = @UserIDIn a VB class file, I am invoking the stored procedure in a function named GetOrderCount which returns a SqlDataReader back to the calling ASPX page. I want the ASPX page to display the 3 OrderIDs of UserID=6 in a Label control. Unlike the DataBinding controls like DataList, DataGrid, Repeater controls, the Label control will not automatically loop through the recordset. So I tried to accomplish this using a For....Next loopDim i As IntegerDim sqlReader As SqlDataReaderiUserID = Request.Cookies("UserID").Value'ShopCart is the name of the class in the VB class fileboShopCart = New ShopCartsqlReader = boShopCart.GetOrderCount(iUserID)While (sqlReader.Read) If (sqlReader.GetValue(0) > 1) Then pnlLinks.Visible = True For i = 1 To sqlReader.GetValue(0) lblLinks.Text = sqlReader.GetValue(1)(i) Next i Else pnlLinks.Visible = False End IfEnd WhileBut this generates the following error:No default member found for type 'Integer'.pointing to the linelblLinks.Text = sqlReader.GetValue(1)(i)in the above shown ASPX code. Can someone please correct me & suggest how do I loop through the recordset so that I can display the records in a Label control?
View 8 Replies View RelatedI have the following sql table and would like to group the results by "StoryTitle" to display in a datalist. The Storytitle field in the datalist is a LabelID StoryTitle StoryAuthor Rating StoryID Comments
1 About Me goodyone 6 20 Great Story
2 About Me goodyone 5 20 Love your work
3 Hello World magicme 6 26 What a Story
4 Hello World magicme 7 26 This Reminds me of...
I know i have to do something in the SQL Datasource statement. Not sure how to do it. here is my statement below
<asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:BrillConnectionString1 %>"
SelectCommand="SELECT * FROM [iaw.comments]">
</asp:SqlDataSource>