How can I add a Columns Group page break for the Group Categegory in Reporting Services 2005 so the first page break takes place after Total A and rest of the data moves to the next page?
I have a 2 column report that is not page breaking the way I would like. The report has a list that is grouped by a "Type" field. The header includes this type, though I had to use an aggregate of the report field like:
=Max(ReportItems!PlanType.value) & " Contacts"
I want a brand new page when the type changes, but since RS treats columns like pages, if my type ends in the first column, the new type begins in the second column. Is there any way to force it to leave that column blank and start a brand new page?
When I use the PageBreakAtEnd on the table or on a group in the table, all it does is create a new column of the column report.
I'd want it to start a new page, how can I do this ? Should I work around this issue using code ?
Background: What I need to achieve is a report with 2 columns where the list of products in category 1 are listed in the left column and then snake to the 2nd column on the same page, then to column 1 on page 2, column 2 on page 2, etc...
When it comes to category 2, it should start a fresh new page regardless of whether the previous product was rendered in column 1 or column 2.
I get the snaking to work using the "Columns" property of the report Body. However page breaks do not start a new page, they just start a new column.
I have two columns, one column has a document ID and a given document can have many pages. The second column has the pages. Now I want to find out when the page number is broken. For example, if doc ID 1 has 3 rows and each of the three has 1,2,3 and then the fourth row has document 1 but the value jumps from 3 to 7 and then goes to 8,9,10 and then jumps again and starts from 17, i want to have the ranges identified.
It seams that I have run into a know and apparently unsolved problem.
How do I force a page break, not column break, on a multi-column report?
I have 4 columns, my data is grouped and is setup to page break after each group. But all I get is a column break, due to RS thinking of column's as pages.
Several people have posted about the same problem, but I can't find a solution. See... http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=884945&SiteID=17 http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=226045&SiteID=17
We are facing problem in doing page break with column grouping. Our column group contains years e.g 2011, 2013 . We want to show a complete page for a year.
Suppose 2011 has 10 records(horizontal) and 2013 has 12 records(horizontal) in column. The output should be 10 records of 2011 in first page, 12 records of 2013 in second page.
We cannot change the report layout to make column to row and vice versa.
I have a report with several matrix objects. The data contained in each matrix is simple. One matrix has one column of labels and a column of data. The other has 3 columns of data. Both matrix's only show about 25 rows of data. A variable amount of data is displayed above the matrix's so that sometime the render across a page boundary. Whenever this happens the matrix doesn't render rows down to the bottom of the page. A considerable amount of empty space is left on the page, the completed matrix is displayed on the next page. I'm wondering how to get the matrix to render in this empty space.
This problem only occurs when I view the report on screen, in the Visual Studio "Preview" window, or from the Report Server web site. Tiff, pdf and printed output doesn't contain the extra space.
I've tried adding my matrix to a List and a Rectangle to see of this would fix the problem but it didn't help.
I've check the dimensions and margins or the page and I don't think I have any sizing problems, everything should fit on the page.
I need to break a column Fullname into two columns called Firstname and Lastname. The Fullname column contains users fullname with a space between first and last name, for example (jonh smith). I want the first name to be in Firstname and last name in Lastname. Can any one help me on this? Thanks in advance.
I need to break a column Fullname into two columns called Firstname and Lastname. The Fullname column contains users fullname with a space between first and last name, for example (jonh smith). I want the first name to be in Firstname and last name in Lastname. Can any one help me on this? Thanks in advance.
I want to generate a breakup report using Transact-SQL. The report is to broken on three parameters and on each breakup I need to calculate the sum of another parameter.
Not long ago I accountered this situation: I had two databases on "MS SQL Server". In one of the databases there was a nomenclature with very large primary key. I had to transport that nomenclature and transform the wide PK into single identity column into the other database.
I decided to use a function for that transformation. BUT that function had to mark somewhere which combination of the PK columns is relative to which identity value. BUT functions CAN'T WRITE under MSSQL. So I took the challenge and mine all sources of information. The result was a function "Exec4Fun" that breaks the rule. I suppose that with this function it's possible to avoid the restriction for triggers, which prevents writing in the triggering table? (not tested yet)
If someone needs such tools, just write back your e-mail and I'll send some code.
Hi all, I am writing a database for a sport club. In order to be able to show reports for achievements I need to break apart the datetime format in SQL.
Example table with columns: 1)Date of competition ||| 2)Time achieved by competitor for 100m(in format mm:ss.fff, minutes:seconds.hundreds) | 01/01/2008||| 00:15.231 | | 01/02/2008||| 00:12.543 | | 01/03/2008||| 00:15.332 |
Then I need to show this in a graph with axis X Date and axis Y Time to show personal development for the whole year. I do not want to CONVERT to VARCHAR because it won’t be possible to compare in the graph.
Hello,In a Stored Proc, I am building a string variable. I am getting outputsfrom 4 different queries and would like the string to have line breaksto display each entry in a different line in a text area. How can I dothis?i.eresult = result1 + result2 + result3 + result4.What characters can I enter so that the output is displayed in thetextarea asresult1result2result3result4Thanks,
HiI am trying to figure out how to exit a cursor loop if a specifiedcondition occurs.I have a select count(*) on a table like thisselect lagplats, count(*) from arsi where artnr = '1440'if that count(*) is > 1 I want to break that cursor loop and fetch thenext row into the cursor and continue.however if that count(*) > 5 I need to exit the entire procedure andnot try and fetch the next row into the cursorI find this hard to explain and the code is long and complicated so Ihope it is possible to understand what I am afterrgdsMatt
I have a table that I want to show only 3 times in every page. If the dataset return to me 7 results i want to show The first 3 in page 1, the second 3 in page 2, the last in page 3... only 3 in every page.
I created that function:
Function saltoCada(ByVal n As Integer)
If (iCount < n) Then
iCount = iCount + 1
Else
iCount = 1
End If
Return iCount
End Function
I created a group in a table with that expression: =Code.saltoCada(3) and then add a page break at end in the group.
Is that the way to do this?It doesn't work.. Any ideas?
Hello, I am using a sqldatareader to get back a whole set of data. The columns are id, data_id and data_desc for example, the collection is id data_id data_desc0 100 this is name for id 00 101 this is address for id 00 102 this is gender for id 01 100 this is name for id 11 101 this is address for id 11 102 this is gender for id 12 100 this is name for id 22 101 this is address for id 22 102 this is gender for id 23 100 this is name for id 33 101 this is address for id 33 102 this is gender for id 3 I want to be able to go thru' this list and break up for each id and create a txt file. So, i will have four text files. txt0.txt will contain100, this is name for id 0 101, this is address for id 0102, this is gender for id 0 I would like to know, how do i use a dataview to break up the sqldatareader so i can then repeat the loop for each id and generate the text file. I don't have a problem generating the text file. Please let me know, how should i go about it. Thanks a bunch,-Sean
I am recieving complete row in one single column and I have pipe delimeter in this row . I want to retrieve the data in individual columns...Currently row is in one column
I have a main report that calls subreports. When a subreport has enough data such that it will not fit into the remaining area of the current page the renderer inserts a page break leaving alot of ugly white space. Is there any way to sop this behaviour? This seems like a very basic thing.
I got a Im from a friend in finland saying checkout this link. I did and it ask for msn hotmail add and password. it didnt show me any pictures of a party. then i get a message from a friend in Israel saying the link i sent didnt show any pictures...this link http://my address.yourpics.linkbux.org/ she was telling me that the link didnt work and she started to get e's from her list saying her link that she sent of pictures didnt work too. what should be the next step, I and the person in israel already sent e-mails telling people dont open any im link saying a link the person in finland has no idea yet
I must be missing a check box somewhere........ I simply added a group to a report and need to do a "Page Break Before" each group. I found the check box to do that, and the report works as expected, BUT I get a blank fist page. So how do I prevent a "page break" on the "first time through"?
Using SSRS 2005, I have a simple "letter" report that has a page header and body. The body has a single table and I have set the "page break on end" property to true, but the report ignores that setting and prints the report as one long letter.
I'm sure I'm just missing some very simple point, but cannot figure out what it is. Any ideas?
I have a tabular data region. Outside of this tabular, I have to put a text box (Entity) with a field. I want to get a page break with this field. How can I do that, as this field is outside of the tabular data region.
I have developed a simple report containing a table which has one group. The group has property 'Repeat Group Header '.
I can see the report when it returns data which spans more than one page. Other wise I see a blank page when seen from the web application. The report is seen properly in Designer.
I found out that if I had a 'Page Break at start' = True for the table, I can see the reports containing single page. But this page break is not acceptable.
Has anyone faced similar issue? Whats the solution to it?
I'm having an odd problem that I've never experienced before. I have a couple of tables and then a bunch of text fields. Each table needs to start on a new page, as does the collection of textboxes. I can accomplish this for the two tables but not for the text boxes. When I set pagebreadatend to true for the second table, the textboxes come right after it as if it were set to false. I even embedded a rectangle in btween the table and the textboxes and set its pagebreakatend to true, but this also did not have the expected effect. What is going on here? There's nothing funky about this report, no subreports, no conditional visibility, etc.. Thanks for any help!
Hi, I am planning to put some page break in my SQL 2005 report using Table Property-general tab and it does not have any effect, if I select INSERT PAGE BREAK or not. It gives a page brreak byitself and when I print the data in PDF, it gives extra page breaks arbirtory.