Hi,
I wanted to display the createDate provided by the asp membership table.
my where clause is this .. WHERE CreateDate = GetDate()
I have create an account today but when i run my select statement with this where clause, the result doesnt show up. It seem like they compare the time as well. How can i make the GetDate to compare only the dates but not the time?
I have three date columns startdate,enddate,rmd
I need to write a query like get all the rows by comparing rmd with system todaydate and these must be with in startdate and enddate
id startdate enddate rmd
1 Â 10-oct-15 Â 16-oct-15 Â Â 11-oct-15
2 Â 11-oct-15 Â Â 14-oct-15 Â Â 11-oct-15
3 Â 09-oct-15 Â Â 11-oct-15 Â Â Â 10-oct-15
4 Â 07-oct-15 Â Â Â 08-ot-15 Â Â Â Â 07-oct-15
5
if sysdate(today) is 11-oct-15 then i need to get all the rows of 1, 2,3
What I need to be able to find is any records where the Discontinue_Date is greater than the Effective_Date on the next row for a given Customer ID and Part_ID. This is a customer pricing table so the Discontinue_Date of row 53 for example should never be greater than the Effective_Date of row 54130, these are the records I'm looking to find. So I'm looking for a SELECT query that would look for any records where this is true. Obviously the last Discontinue_Date row for a Customer_ID will not have a next row so I wouldn't want to return that.
View 9 Replies View RelatedI have the following information in a table. What I would like to do is pull out all the visits for each customer that are less than 30 days apart.
Customer# VisitDate
9082012-07-28 00:00:00.000
9082013-09-20 00:00:00.000
9082013-12-23 00:00:00.000
9082014-01-10 00:00:00.000
9082014-01-27 00:00:00.000
9082014-02-16 00:00:00.000
9082014-05-21 00:00:00.000
9082014-05-30 00:00:00.000
9082014-10-01 00:00:00.000
9082015-02-28 00:00:00.000
9082015-03-22 00:00:00.000
9272012-02-16 00:00:00.000
9272014-12-14 00:00:00.000
9272014-12-23 00:00:00.000
I have three tables:
"PaymentsLog"
"DatePeriod"
"PaidOrders"
As per below
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[PaymentsLog](
[Code] ....
Is there a way to look at the DatePeriod table and use the StartDtae and EndDate as the periods to be used in the select statement and then cursor through each date between these two dates and then insert the data in to the PaymentsLog table?
I need to compare tow dates DateField1 and DateField2 and find number of hours between these two dates. Then I need to deduct non-business days and hours (Business days: Monday-Friday and Business Hours: 7:00am-7:00pm) from this and find net hours. How can I do this?
View 7 Replies View RelatedHi,I need to compare Todays Date with a Date in the Table (DateExpired)to see if the membership expired. How do I do that? thanks
SELECT DateExpired FROM Member
how to compare the dtaes for the follwing
SELECT COL1,COL2 FROM TABLE1
WHERE WORKDATE >01/01/2002
THE WORKDATE IN THE TABLE IS HAVING DATETIME DATATYPE.
I DONT WANT CONSIDER THE TIME OF THE DATEPART.
I JUST WANT TO COMPARE THE DD-MM-YYYY.
PLEASE HELP ME IN THAT.
THANKS IN ADVANCE
Hi,
I am new to SQL and I have a problem to deal with dates.
I have a field called LogDate (smalldatetime) and default value getdate(). The date is added immediately when a visitor visits a page of my site.
The problem is that I cannot retrieve the no of the visitors for today using getdate(). I use the following query but I am sure that something missing.
SELECT Count(*) As DailyVisitors
FROM stats
WHERE LogDate = CONVERT(varchar(10), GETDATE(), 103)
Please help
Denis
www.tabletennis.gr
sorry i posted this in the tsql forum by accident, here's a repost
I've got a query that I need help with. This is a simplified version of the table I have.
sellerID, orderID, time1, time2, time3, time4
1, 1b1, 11:30 11:35 11:40 11:45
1, 1b2, 11:50 11:55 12:00 12:05
1, 1b3, 12:10 12:15 12:20 12:25
2, 1c1, 11:20 11:25 11:30 11:35
2, 1c2, .... and so on
What I want is a datediff between time4 of the first OrderID to time1 of the next orderID within the same sellerID.
What I want is the following output
sellerID, orderID, timeDif1(time4-time1 of nextrow), timeDif2(time2-time1), TimeDif3(time3-time2), timeDif4(Time4-time3)
1, 1b1, 10mins, 5mins, 5mins, 5mins
Any help would be appreciated!!
THanks
need to look through hundreds of rows and compare two columns, and pull out rows where the date difference is 7 days
problem is one column stores the date as a string and values in that column look like this:
01/12/2007 10:15 pm
or
01/12/2007
the other column stores the date as seconds since 1/1/1970, which is good and easy to work with..
how do I write the select?
any ideas
thnx
tony
How can I check if:
Date1 is newer than Date2?
Thank you!
I need to compare several dates in a single record and determine the maximum value. Not sure how to do this in TSQL. Something like this (though I obviously can't use the MAX function because):
SELECT MAX(datefield1,datefield2,datefield3) as latestchange,jobnum
FROM table1
Anyone have a function that will do this? Or is there one built in?
Thanks!
Brian
Hi:
Well, I am venturing into new territory for me. I'm very illiterate when it comes to SQL Server and so I need assistance. I have the beginnings of my stored procedure, which is supposed to compare two dates/times and If they are not equal I need to kick off a DTS Package.
So, here's what I have so far (it returns two dates like I would expect):
CREATE PROCEDURE usrCompareDataDownload
AS
BEGIN
SELECT MAX(ASP_ZZ_CHNG_TMST) FROM tbl_MaterialWeeklyData;
SELECT MAX(ZZ_CHNG_TMST) FROM TV_ASP_DPUL_WKLY;
END
GO
Thanks,
Bob Larson
This is probably a problem with a pretty simple solution but i can't find the right control/data flow item to handle it
Scenario.
I determine the database date for my source data for a set of ETL jobs via a piece of SQL - this gets passed to a master package variable which is subsequently to be used as the "Load date" of the resulting child package ETL routines. However I only want the packages to run if the LoadDate has either not been run before or is the next one in the DW sequence.
To check for this, In my data warehouse I also have a table called Import_Registry where the date of each upload is stored at the end of the daily ETL routines. So I can obtain the potential NextUpload date via this bit of SQL script.
SELECT DATEADD(day, 1, MAX(Upload_Date)) AS NextUpload FROM Import_Registry
Problem. I need to compare these two dates (the source db date & the DW next upload date) to see if they match. If they do match, then I run all the ETL packages using the date. If they do not match, say for example if the source database date is less than the "NextUpload" date I want to exit the routines "gracefully" and log the failure.
How do I get this working - can't seem to get my head around how I can compare the 2 dates ?
I need to pull dates from a DB2 database via TSQL (Linked server - IBM DB2 for i IBMDASQL OLE DB Provider) and compare it to today for a less than or greater than type comparison.
Database: DB2, Customer information housed here
Columns:
UTOFMM - Month (2 character, numeric)
UTOFDD - Day (2 character, numeric)
UTOFYY - Year (2 character, numeric. Problem: years from 2000 to 2009 are stored as 0, 1, 2, ... etc)
UTOFCV - Century Value (2 char, numeric. Â 0 = before 2000, 1 = in or after 2000)
I need to concatenate the date to be "sql" friendly, and then compare to today's date. Â It's to find any customer with date values in the fields above, and then differentiate between dates before today and after today.Here is the snippet of what I'm trying to fix. Â This portion of a nightly job is just checking for <u>any</u> value in the UTOFMM column of the current record.
Add Customer ID
Update [responder].[Temp_RX_CUSTOMERS]
set CustomerID = lf.UTCSID
from [responder].[Temp_RX_CUSTOMERS] LEFT Outer Join
[HTEDTA].[THOR].[HTEDTA].UT210AP lf ON [responder].[Temp_RX_CUSTOMERS].LocationID = lf.UTLCID
where lf.UTOFMM = 0
GO
SQL 2005 Dev
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
Today I have got one scenario to calculate the (sum of days difference minus(-) the dates if the same date is appearing both in assgn_dtm and complet_dtm)/* Here goes the table schema and sample data */
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[temp_tbl]') AND type in (N'U'))
DROP TABLE [dbo].[temp_tbl]
GO
CREATE TABLE [dbo].[temp_tbl](
[tbl_id] [bigint] NULL,
[cs_id] [int] NOT NULL,
[USERID] [int] NOT NULL,
[code]....
I have a table that has hotel guests and their start stay date and end stay date, i would like to insert into a new table the original information + add all days in between.
CREATE TABLE hotel_guests
(
[guest_name] [varchar](25) NULL,
[start_date] [date] NULL,
[end_date] [date] NULL,
[comment] [varchar](255) NULL
[code]...
Hello Guys,
I'm searching for a way to compare informations from one database against another database.
E.g. i want to check if serialnumbers of my first database (eg hardware.xls or hardware.csv ) are already stored in my sql server database.
I know i can use sql querys (Joins) for that task but i don't know how i can access 2 different databases at the same time. Do i need a tool for it? Does Excel is able to compare those data? But how? I'm searching for that thread since 2 days testing with some tools without any success...
So please help...
Kindly Regards...
Be
Table MediaImportLog
column ↘ImportIndex ImportFileTime ImportSource
value ↘80507 20060506001100 815
80511 20061109120011 CRD � P.S the values type of ImportFileTime 20060506001100 → 2006 -year 05-month 06-day 00-HH 11-minute 00-second】
Table BillerChain
column↘BillerInfoCode ChainCode
value ↘750 815
value ↘81162 CRD
Table Biller
column↘CompanyCode BillerCode
value ↘999 750
value ↘81162 516
TAble DataBackup
column↘CompanyCode Keepmonth
value ↘999 6
value ↘81162 12
---------------------------------------------------
when I'm in MediaImportLog , I want use column ImportSource to compare with column ChainCode in table BillerChain ( so I get BillerInfoCode) and then use the BillerInfoCode I got to compare with column BillerCode in Table Bill ( I get CompanyCode) finally I use CompanyCode to compare with column CompanyCode in table DataBackup so I can get the company's keepmonth
How can I get the keepmonth? can I use parameters ?
thank you very much
Hi all,
I have encountered a problem that I can't compare the date in SQL Server 2000.
But I know that maybe I have used "datetime" as data type for that field.
My question is that, how can I get ONLY the "date" in stead of "datetime" from the database?
Your attention is appreciated!
Thank you.
Regards,
katszeto
We have three database server . Development, Test and Production. would appreciate if any body could receommend utilities/ways to compare apart from sqlcomp or ERWin
regards
rajeev
How can I create a database link so that I can check data between 2 similar
SQL Server 7 databases ?
I'm rewriting a huge FOR XML EXPLICIT procedure to use FOR XML PATH, and need to compare previous output to the refactored one, so i didn't mess up XML structure.
The thing is, i'm not sure that SQL Server will always generate exactly same xml **string**, so i'd rather not compare by:
WHERE CAST(@xml_old AS NVARCHAR(MAX)) = CAST(@xml_new AS NVARCHAR(MAX))
nor do i want to manually validate every node, since the generated xml-structure is quite complex.
compare xmls by their "semantic value" ?
I need to compare to string in sql
requirement is
Select Reson_id from reason_data where reason='ryete / werewr ddsad '
is there any way without string function? bcz string function take more exaction time
I want to know if there is a way to compare dates in the sql statement with dates that I input into a database and todays date. the datatype that I'm using is smalldatetime.The statement I used is:Select Date from Table where Date > 'Today.now'I get an errorCould this be done or is there another approach?
View 1 Replies View Relatedguys...do you have any recommendations for a tool that compares specific MS sql databases including data comparisons?
I typically develop locally, then deploy remotely.
it's getting to be quite a pain to not only remember which schema objects to update on the remote host, but the data elements that need to be keyed in as well.
are there any shareware tools out there you'd recommend? (I don't have a great budget as this is coming out of MY pocket and not my companies.)
THanks!
I am collecting cost and other information for my manager who is
willing to set up an "in house" web dev dept. Will SQL server
express always be free? What does it lack from the regular
version of SQL server? How would it compare with other DB's available
for web use. This isn't a retooled Access thing, is it?
I am trying to compare the data from 2 different servers. It is the same table. I did a select * and put the data into 2 different text files. I then used the Windows NT findstr utility to compare them to find the differences. I used the command findstr /v /i /x /g:file1 file2 > file3, where file1 is the larger table, and file2 is the smaller one. I want to find the records in file2 which are different or do not exist. I recieved no data back. I have ASCII characters in the text files. My question is does anyone know of a better way to do this, or how to make this command work?
View 1 Replies View RelatedHi,
I have to compare the previous row with current row in a table in SQL Server 2000. Please help me how to do this in a optimized way. Table contains nearly 30 columns and rows count is more than 10 digits.
I need to compare the date column. The date column is 2012-01-22 in this format.
So I need to convert getdate() into this format yyyy-mm-dd.
What is the style number I have to use?
I used the link [URL] but I didn't see this format.
i have two tables.
Table A
IdName
101Dante
102Henry
103Harold
104Arnold
Table B
NumberName
102Dante
107Gilbert
109Harold
110Arnold
106Susan
112Marian
I want the result in table 3 like below, if value exists in Table A and not exists in Table B then the record should enter in table 3 with table name in new column, and vice versa.
Table C
Col1Col2
HenryTable A
Gilbert Table B
Susan Table B
Marian Table B
using below logic to get the values from tables..
select
t1.columnA
, t2.*
from
table1 t1
join table2 t2 on t2.columnB = t1.columnA