I seem to remember that the font size and type can be controlled in SQL Server 6.5 and the process controlls the fonts displayed
throughout the program - Enterprise Manager, Query Tool, etc.
I have just re-installed 6.5 and the fonts are way too small.
Can anyone tell me how this is done?
Thanks.
Jack
Is there any way to use a font size smaller than 8pt? Believe it or not... I need to go down to a 6pt font for a report.
Thanks!
Leif
Hi,
I am trying to store RichTexBox information, such as the formating of the paragraph, color, font and etc. Is that possible to store this kind of information in Sql Server 2005 Compact Edition without stripping down the properties one by one?
I am trying to store a sentence which contain of multiple color or font for different words. Is there anyway to store those information?
thanks.
Hi all,
Is it possible to setup different font size when a user is browsing or printing a report?
I have a lot of data to print on a report and i need tu use a font size of 7pt which is fine for printing but when the user is looking at the report on the browser a font size of 7pt is a bit too small and the bold doesn't work.
Tia
Is there any possibility to have the  Defaultvalue of  a Parameter in Bold fonts and rest of it as Default parametervalue=Defaultvalue ,"Bold","Default".So for example in drop down of parameter if the C is the current value it would look like this:
ParameteValue:
A
B
C
D
hi,
I have one DB in SQL Server 2005.When I was creating it
takes 7813 MB.Now the databse size almost full.Now I want to extend the
DB Size.At my HDD has more space(near by 160 GB).But I don't know how to
extend the Size.More over I had one doubt.Am executing the
exec sp_helpdb command.It shows the Datafile maxsize is Unlimited.I want to
know when the data is full,whether it automatically takes the size from the
HDD or not.
Please Help me out to this Problem.
Hi all,
I encountered error 1105 (Can`t allocate space for object .....) while running a query.
I had dump transaction with no log sucessfully and retry running my query but
still encounter error 1105.
I had checked my database size and following are the info:
Datasize : 2500MB Database size available : 753.39
Log space : 500MB Log space available : 500MB (this was acheive after
after dump trans. twice. it was around 480MB before)
Thus looks like the data segment is full!!!
I expanded the size of the disk device D on which the segment device A is on by 50MB. When I did a sp_helpdevice D, the expansion is reflected.
Next I run sp_extendsegement, A, D.
However running sp_helpsegment A doesn`t show that segment A is expanded.
Please help!!! How do I expand the size of the segment? (without creating a new disk device, is it possible)
Any other way to resolve this problem?
Also how to check if a particular segment is full? eg. the %usage of data/log segment.
Thanks in advance.
I have a database that is over 45 GB and need to increase the size, can someone help me with the code to get it done?
Thanks
Dear
I am using varchar data type in my table.it provides maximum 8000 character. but i want more than that.
how to increase size more than 8000
i want to use text datatype but when i type in length it doenst type.it displays only 16.i cant change to another value.
please help me out
Waiting for reply
Regards,
ASIF
Dearfriends,
please guide me,
i've a column with varchar(100).
presently, i need that column as varchar(500).
thank you very much.
Vinod
Dear friends,
i've a column with nvarchar type. how can i increase the size of the column?
Vinod
hey
i've a db running sql server express sp2. the db size now is 1.1 gb
i've a table with a varchar column of size 20 . when i try to increase the column size to 50 i get a
timeout exception, and the the cloumn size is unchanged. this table has 2.5 million records
i use sql server management studio express to do the changes
is there a way to increase this timeout or whtever i can do to update this column size?
thx in advance
Hi,
How can I increase the transaction log size of my sql server 2005 database? i can execute the shrink and backup log which can shrink the .ldf file to 1MB. However, since my dts involves a lot of inserts and updates, the my transaction log grows to 700MB in the middle of my dts execution. How can i increase the transaction log size maximum capacity to probably 1.5GB just so it can accommodate my full dts execution?
BTW, this is my commands to shrink the log file:
DBCC SHRINKFILE(<dbname>_log, 1)
BACKUP LOG <dbname> WITH NO_LOG
DBCC SHRINKFILE(<dbname>_log, 1)
cherriesh
Hi All,
Is it possible to increase the size of data file in SQL Server 2005 Express Edition.
I think the licensed limit is 4096MB whcih i am unable to increase.
Could anyone let if is it possible to increase the data file size and if yes then how?
Thanks,
Varun
A few months ago a customer moved from SQL 2000 to SQL 2005. The db wasbacked up on SQL 2000 and restored to SQL 2005. The application using thisdata works on SQL 2005 but takes no advantage of new features. The db onSQL 2000 was about 2.9GB, now on SQL 2005, it is 16.5GB. The db is set toSimple recovery so trx log is only 2mb. The mdf file is 16.5GB, ManagementStudio shows only 5mb free space. There has not been a huge increase intransactions.One of the largest tables has only added 2,000 rows since the move to SQL2005. Yet the data and index size has jumped from about 400mb to 3.5 GB. Iused the 'BigTables.sql' script found at various SQL sites:www.databasejournal.com/img/BigTables.sqlAny ideas why such a large increase?Thanks
View 4 Replies View RelatedHi All,
Is it possible to increase the data file size in SQL Server 2005 Express edition?
If yes then how?
Thanks,
Varun
Hi all,
I tried to change the size of a field of my table using the query :-
ALTER TABLE test MODIFY id varchar(50)
Initially the size of id was set to 30 .Is there any other way or any error in my query.Please help me soon.
joshymraj
I encounter one weird problem, I have a database with around 7 GB ...when I delete a bunch of data from it, it suppose to reduce thedatabase file size, but weirdly, the file size increase to 8 GB.Wondering why. Is it suppose to be like that?Is it the architecture is designed to work like that?Is there any way for me to reduce the database file size?Thanks.Peter CCH
View 2 Replies View RelatedI'm trying to query a table where in the data in a cell is 65KB and when i try to do a SELECT I am unable to get the entire data from the cell.
SELECT CAST(Xml_data as XML) from TableName where ID=100
Error Message: Msg 9448, Level 16, State 1, Line 1 XML parsing: line 241, character 76, well formed check: undeclared entity
View 2 Replies View Related
No transaction log involved, only the table itself.
Use sp_spaceused "table_name" to check the space used.
It seems the table size actually increased from the beginning to the middle of deletion, at the end of deletion, its size decreased.
Recovery mode set to be simple, autoshrink turned on.
The tables tested are about 50MB ~ several GB in size, all have the same behavior. The size increased about 5%~10%.
Since the deletion is called from another software, I want to know if it is possible for SQL Server to have this behavior or it is absolutely the 3rd party software's issue
Thanks!
I need to increase the file size for a mirrored database. I am new to using mirroring for replication. Will increasing the file size break the mirror?
View 2 Replies View RelatedI save Table size and recs. no every day. and check it some days.
...
insert into @t
exec sp_msforeachtable 'exec sp_spaceused ''?'''
...
But Today I saw sudden increase size in a table. about 128 MB in a day. (Average Growth fro this table was 4 or 5 MB in a day)This growth was for Only 4222 Records. While for more number of records (about 7000) in yesterday we had only 2 MB GRowth!
This Table information (Now):
sp_spaceused 'Table1'
Result:
name ---Rows --reserved --data
Table1--1021319--460328 KB --283104 KBI Try to gess The reason. I copy These new records to another table.But The result was more strange : on new table the size of these record was : < 1 MB I copied All records to another table . The size was : 148 MB (while this is 283 MB in my real database)
Where we have increase the size of the calculated column in cube..whether in attribute  or some where else...
View 4 Replies View RelatedHow to increase the chart report size to avoid the mismatch of output data like below....
View 2 Replies View RelatedHi,
SQLSERVER 2005 keeps throwing assertation error and generating crashdumps.
I want to isolate the cause, however, the query is too long (>2kb) to fit in a crash log.
Is it possible to increase the size allocated to showing the query in the crash dump, or get the full text of that query causing the crash?
Need to confirm if we can add space(increase data file size) for the database which is configured for always on similar to that of mirroring or we need to follow any different procedure.
I have a requirement wherein the datafiles on both the primary and secondary replica got full, if i add space to the primary database will it automatically get added to the secondary replica or not?
Hi,
I have a report on my report server... and it has set for multivalue parameter... but since the particular client has only one plan so they wont have the select all function... but the size of the ddl is so squished that we cannot see the Plan name at all...
So can someone pls help me as to how can i increase it..
Regards
Karen
I had several databases under sqlserver ce 2.0 (in my Pocket PC) which contained ntext fields. The size of the databases varies from 50,000 to 700,000 records. The size of an ntext field is from 4 bytes to 2 megabytes.
When I recreated my databases under sql server 2005 mobile on my desktop using VS2005 (see my post just under this one), I saw a big difference between the old and new database sizes. This problem was mentioned in one of the posts in this forum and the reply was to replace ntext data with ncharvar type.
Since most of my data was longer than 4000 bytes (which is the limit for nvarchar type), I couldn't use this suggestion. Instead, I changed my ntext type to image type and used a GetByte conversion.
No change! The size of the new database is still 50 % larger than the original. Since the difference is around 300 MB, this is an unacceptable thing.
Now, I either wait from somebody to suggest a new solution (apart from keeping the ntext data in a separate binary file and keep index of the records of this file in the records of sql database) or, most preferably, have
Microsoft solve this problem as soon as possible.
Thanks for any help in advance
Talat
After converting from SSIS 2008 to SSIS 2012, I am facing major performance slowdown while loading fact data.When we used 2008 - one file used to take around 2 hours average and now after converting to 2012 - it took 17 hours to load one file. This is the current scenario: We load data into Staging and Select everything from Staging (28 million rows) and use a lookups for each dimension. I believe it is taking very long time due to one Dimension table which has (89 million rows).Â
With the lookup, we currently are using partial cache because full cache caused system out of memory.Lookup Transformation Editor - on this lookup -Â how to increase the size on partial Cache size 64-bit? I am being stuck at 4096 MB and can not increase it. In 2008, I had 200,000 MB partial cache size.
 I have a range bar chart Inside a table of row group and the chart is repeatedly generate according to category ,i want to increase chart height dynamically based on category.
suppose for if category =A THEN CHART HEIGHT=10CM
category =B THEN CHART HEIGHT=7CM
hi i'm having this error on my application"cannot allocate more connection.connect pool is at maximum increase max pool size" the proble is when i do testing this error does not apply it only Appears when the application is been used by many people
How can I resolve this?
Thanks
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?