How Do I Search For A Table Name In Microsoft SQL Server
May 6, 2008
Hello,
Can someone tell me how I can search for a table name in Microsoft SQL Server? I'm thinkg it is something like:
Select table_name from All_tables where Table_name like '%Cust%'
Thank you
Jon
View 4 Replies
ADVERTISEMENT
Apr 17, 2007
Hi all,
This may be more of a Sharepoint or server question but I thought I would post it here to start off with. I have an installation of SQL 2000 SP4 and sharepoint services 2003 all on one server. For example the SQL 2000 (SP4), sharepoint and its indexes all on the one server (HP G4 DL380). I have installed the index service and the full text services on the SQL server then configured searching in sharepoint. The search worked fine for about a year until one day the server started randomly hanging for no apparent reason. After a hard reboot the server would begin to hand again after around 2-3 minutes of being online, sometimes less. After lots of problem shooting I nailed it down to being the Microsoft search service that caused the issue. Basically if I set this service to manual and boot I have no problem. As soon as I start the service the server will start to hang about 2-3 minutes later.
I tried this again last night after trying some fixed and got the same result. The only error I get are in the application log which are about 4 of these with different file types.
One or more documents stored in image columns with extension €œX€? did not get full-text indexed because loading the filter failed with error '0x1'
The server continues to log messages while it is hanging and you can ping the server but you can not access sharepoint, remote in to the server, you can login locally but as soon as you try anything like bring up the start menu all resources will freeze up. During this time there is no disk activity and the CPU usage is 1-3% and mem usage is low.
Can anyone suggest anything to fix this problem so I can start the Microsoft search service and use search in sharepoint again.
Thanks,
LS
View 2 Replies
View Related
Mar 30, 2000
I am working with Microsoft Search on SQL 7.0 and the catalog will not populate properly. The NT event log says "Unable to access crawl seed. The operation timed out." Has anyone run into this before? I have been able to duplicate this problem on two boxes. Question 2: Is Microsoft Search stable at all?
View 1 Replies
View Related
Mar 30, 2013
I have installed the Adobe iFilter 11 64 bit and set the path to the bin folder. I still cannot find any text from the pdf files. I suspect I am missing something trivial because I don't find much when I Bing for this so it must not be a common problem.Here is the code.
--Adobe iFilter 11 64 bit is installed
--The Path variable is set to the bin folder for the Adobe iFilter.
--SQL Developer version 64 bit on both Windows 7 and Windows 8.
USE master;
GO
DROP DATABASE FileTableStudy;
GO
CREATE DATABASE FileTableStudy
ON PRIMARY
[code]....
View 14 Replies
View Related
Feb 10, 2006
hi,
Can you give the query in MS SQL Server 2005 which can be used to rename a existing table in database.
Thanks in advance,
View 1 Replies
View Related
Apr 30, 2007
Hi guys,
I need to provide some of my users an easy way of accessing a SQL Server table through MS Access so
that they can edit the data in the table.
Please let me know which of the following is more appropriate to accomplish this task.
1. Creating a Data Access Page (OR)
2. Creating a Link Table
I tried to create a Data Access Page but I could only be able to see but not edit the data in the table. But, I
guess there is a way to do that.
Please throw some light on this topic.
Thanks a lot for your time.
-RL
View 1 Replies
View Related
Mar 25, 2015
I have a table that contains words that will be used to search another table where FullText index has been created on searchable columns. I'm basically trying to run something like this:
SELECT t1.col1, t2.col3
FROM tbl1 t1, tbl2 t2
WHERE CONTAINS (t1.col1, t2.col1)
I know this won't work but is there a way to join these two tables so the words (t2.col1) can be passed as search conditions? There is no common key on both tables so normal join won't work. I'm trying to find a way to pass the search words from one table to another.
View 0 Replies
View Related
Jun 21, 2007
Hi
I am trying to use Association Viewer Control in
Microsoft.AnalysisServices.Viewers.DLL dll in VS 2005 but sometimes it gives an error.
"Code generatio for property 'ConnecitonManager'" failed. Error was:'Property accesor 'ConnectionManager' on object 'AssosiactionViewer1' threw the following exception:'Object referance not set to instance of an object"
Is there anyone here who use
"Microsoft SQL Server 2005 Datamining Viewer Controls" in SQLServer2005 FeaturePack ?
http://www.microsoft.com/downloads/details.aspx?FamilyID=50b97994-8453-4998-8226-fa42ec403d17&DisplayLang=en
i am using VS2005 Version 8.0.50727.762 (SP.050727-7600)
and SQL Server 2005 SP2
thanks from now.
Cem Ãœney
View 9 Replies
View Related
Jul 23, 2005
Dear All,Access adp on sql-server 2000After upgrating to A2003 updating data with 1 perticular combobox causes theprogram to hangs without any error-msg.Traying to change te combobox recordsource i get this error:This version of Microsoft Access doesn't support design changes to theversion of Microsoft SQL Server your project is connected to. See theMicrosoft Office Update Web site for the latest information and downloads(on the Help menu, click Office on the Web). Your design changes will not besaved.The solution in :http://support.microsoft.com/defaul...kb;en-us;313298tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'What should I do.Is the failure of the combobox also caused by the absence of dt_verstamp007???Filip
View 2 Replies
View Related
Sep 25, 2007
Hi,
I'm trying to install Microsoft Dynamics 10.0 with SQL 2008 Dev but when launching the utilities this returns the following error message:
******************************************************************
Your current SQL Server is not a supported version.
Req: Microsoft SQL Server 8.0
Act: Microsoft SQL Server code name "Katmai" (CTP) - 10
You need to upgrade to SQL Server 8.0 before continuing.
******************************************************************
Any ideas could help or has this if anyone knows been desinged not to work with GP10 currently?
Assad
View 7 Replies
View Related
Oct 14, 2005
I have one table with 300,000 records and 30 columns.For example columns are ID, COMPANY, PhONE, NOTES ...ID - nvarchar lenth-9COMPANY - nvarchar lenth-30NOTES - nvarchar length-250Select * from databasewhere NOTES like '%something%'Is there a way to get results from this query in less then 1-2 secondand how?
View 7 Replies
View Related
Mar 17, 2008
I have a query that executes just fine except that it won't recognize varchar(255) ( or any other value within the () ) and if I leave it off like this: varchar, then it executes but it leaves that value as 1 and that is just not very useful for my purposes. This also happens with anything else that requires () to add length such as char(), or nvarchar(), etc... Any ideas?
View 1 Replies
View Related
Oct 3, 2001
Hello,
"Failed to copy objects from Microsoft SQL Server to Microsoft SQL Server "
I keep getting this when trying to copy stored procs from one db to another on the same server. I am using the DTS wizard. I have been able to copy the tables but I need the sp's too, and there are too many to copy one at a time.
Help!
TIA,
Bruce
View 1 Replies
View Related
Mar 27, 2008
Pls tell me about the adjact difference between sql server 2005 and sql server 2008.
Why to upgrade for Sql Server 2008
View 1 Replies
View Related
Aug 30, 2006
In VS 2005, when we choose database connection, we can choose one of the above. My question is in what situations should we choose MS SQL Server Database File (SqlClient), and when should we choose Microsoft SQL Server?
I want to deploy a standalone desktop application with a backend database. Which backend database should I should and which of the above connection should I choose?
Thanks very much for your information.
View 1 Replies
View Related
Jun 23, 2015
I've a database with a table that has 16 columns that are searchable. There can be a numerous combination of those columns used for searching...
In this case the best solution is to create an index on each column individually or at least the most used?
View 7 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
Sep 12, 2007
Hi
We are checking VB 9 (Orcas).
we connected to database created under with sql server 7. with this code
Public cn As New ADODB.Connection
Public Sub OpenDB()
cn.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial catalog=Reservation;Data Source=.")
End Sub
this code worked well.
we know sql7 is not compatiable with vista. please tell us how to connect it wiith sql2005 . we downloaded orcas express edition beta. we created a database also. please let u know how to connect with Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5).
Rgds
Pramod
View 7 Replies
View Related
Nov 6, 2014
I have a scenario of where the standard Full-Text search identifies keywords but Semantic Search does not recognize them as keywords. I'm hoping to understand why Semantic Search might not recognize them. The context this is being used in medical terminology and the specific key words I noticed missing right off the bat were medications.
For instance, if I put the following string into a FT indexed table
'J9355 - Trastuzumab (Herceptin)'
AND
'J9355 - Trastuzumab emtansine'
The Semantic Search recognized 'Herceptin' and 'Emtansine' but not 'Trastuzumab'
Nor in
'J8999 - Everolimus (Afinitor)'
It did not recognize 'Afinitor' as a keyword.
In all cases the Base of Full-Text did find those keywords and were identifiable using the dmvsys.dm_fts_index_keywords_by_document.It does show the index as having completed.
why certain words might not be picked up while others would be? Could it be a language/dictionary issue? I am using English and accent insensitive settings?
View 0 Replies
View Related
Jul 24, 2007
would you use sql server "full text search" feature as your site index? from some reason i can't make index server my site search catalog, and i wonder if the full text is the solution. i think that i wll have to you create new table called some thing like "site text" and i will need to write every text twice- one the the table (let's say "articles table") and one to the text. other wise- there is problems finding the right urlof the text, searching different tables with different columns name and so on...
so i thought create site search table, with the columns:
id, text, url
and to write every thing to this table.
but some how ot look the wrong way, that every forum post, every article, album picture or joke will insert twice to the sqr server...
what do you think?
View 1 Replies
View Related
Dec 11, 2006
How can I search throught DOCX (MS Word 2007) documents by SQL Server 2005 Full Text Search engine?
Should I something download?
View 6 Replies
View Related
Apr 19, 2014
I have written this sample query to search a full-text indexed table and return the results. If the word occurs more than once I want it to return as a new record and the results show a short summary of the location. I was using 'like', but the full table scans were really slowing it down. Can performance be improved for the following (The results returned by my query are accurate)
Query
DECLARE @searchString nvarchar(255);
DECLARE @searchStringWild nvarchar(275);
SET @searchString = 'first';
SET @searchStringWild = UPPER('"' +@searchString+ '*"');
SELECT id, '...' + SUBSTRING(searchResults.MatchedCell, searchResults.StartPosition, searchResults.EndPosition - searchResults.StartPosition) + '...' as Result
[Code] ....
View 2 Replies
View Related
Dec 1, 2006
I have one control table to store all related table name
Table ID TableName
1 TableA
2 TableB
In Table A:
RecordID Value
1 1
2 2
3 3
In Table B:
RecordID Value
1 1
2 2
3 3
How can I get the result by select the Table list first and then combine the data in table A and table B?
Thank you!
View 1 Replies
View Related
Aug 26, 2006
hello all member
View 14 Replies
View Related
Jul 23, 2005
I'm not asking a lot. I just want to know if I can connect from anExchange server to a SQl server without having to use Access linkedtables. Surely MS must have had a look at this but I can't findanything out there.Help appreciated.Ginters
View 1 Replies
View Related
Aug 9, 2005
I installed Microsoft SQL Server 2005 Express Manager and connect to SQL 2000 normally
View 10 Replies
View Related
Aug 9, 2006
I'm just wonder if this is a bug in MS Search or am I doing something wrong.
I have a query below
declare @search_clause varchar(255)
set @Search_Clause = ' "hepatitis b" and "hepatocellular carcinoma"'
select * from results
where contains(finding,@search_clause)
I don't get the correct result at all.
If I change my search_clause to "hepatitis" and "hepatocellular carcinoma -- without the "b"
then i get the correct result.
It seems MS Search doesn't like the phrase contain one letter or some sort or is it a know bug?
Anyone know?
Thanks
View 3 Replies
View Related
Mar 23, 2008
I have just installed sql server 2005 but, now I have two types of server name: Microsoft SQL Server Developer EditionMicrosoft SQL Server Express Edition Which one should I use? Does it matter??thanks..
View 1 Replies
View Related
Mar 27, 2008
Does anyone know how to truncate a Mircrosoft Access table from an SSIS package?
View 7 Replies
View Related
Apr 16, 2008
Hi,
I am developing a report that should be localized dynamically. The report will have both arabic and western users. Therefore I need to use the direction property of some single text boxes, which works fine. But when setting the direction property to RTL for a table it has no affect!
You would assume that the whole tables content should be "reversed" and also the text in the table went from right to left. But no.
When viewing the report in IE and right clicked and click "View Source" you can see that the table do not have a direction style set, even though I set the property on the table in design mode.
I am going crazy about this issue! Could this be a MS bug?
I really need some help here...
PS. I have tried numerous of combinations of the different International properties to get the direction property to work - with no luck.
View 1 Replies
View Related
May 22, 2007
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
View 7 Replies
View Related
Dec 8, 2006
Hello,
I have an SQL database with a table. This table has two fields: [Title] and [Description].
In my web site I have a text box where the user inserts some keywords, as follows: 1 > book english 2 > book AND english 3 > book OR english
Is it possible to create an SQL procedure which looks which records have the words "book" and "english" in the fields [Title] or [Description]?
And is it possible to somehow also use the words "AND" and "OR"?
I never did something like this and I just would like to create a simple search in my web site which looks into my documents table.
Thank You Very Much,Miguel
View 1 Replies
View Related
Mar 4, 2003
Is there a simple script to search an entire table for a particular string (ex. a name) then list the column there in
View 1 Replies
View Related