I have created some stored procedures that I wish to share with another user in another database. How can I extract this code, other than cut and paste, since I have quite a few? Is it possible to duplicate database object "stored procedures"? How about a script that would recreate them in the target database?
Any help would be appreciated.
Thanks!
I thought I could just copy over some asp.net code like: System.Web.Mail.MailMessage mailMessage = new System.Web.Mail.MailMessage();
But VS2005 doesn't seem to want me touching System.Web.Mail.
Any ideas?
Thanks,
Allen
Hi,
I am trying to write a stored procedure in Sql Server that should send an email containing a query result everyday at 2:00 PM. How can I do this?? Im trying to use xp_sendmail but this gives me the following error:
Could not find stored procedure 'xp_sendmail'.
Plz let me know if there is any easy way to handle this.
Thanks a lot
I have an store procedure and I want to build an email with this store procedure to email me How can I use the email command to incorporate into my sql SP?
View 4 Replies View RelatedHi
I am new to C# . I have a stored procedure which takes 4 parameters
GetSearchComplaint( Comp_ID , strViolator, strSts, FromDate, ToDate), These parameters can be null.
And i have 5 textboxes from which i send the parameters.
I am validating the input like this :System.Nullable<int> Comp_ID;
if ((txtsrchCompID.Text).Trim() == "")
{Comp_ID = null;
}else if ((txtsrchCompID.Text).Trim() == "")
{
try
{int i = int.Parse(txtsrchCompID.Text);
Comp_ID =i;
catch
{mesage += "Complaint ID is not valid";
}
}
When i run this i get this error ---'Use of unassigned local variable 'Comp_ID'
I get the same error for FromDate(DateTime) and ToDate(DateTime) . but not for string variables strViolator and strSts.
How do i pass the null value to the stored procedure? pls help..
Hi there,
My requirement is to send more than one GUID to the stored procedure.
How can I do that? If you can give me an example that will be great.
Kind regards,
Ricky
I am tring to use a stored procedure to run a function POST some data through HTTP, but failed. Here are the codes I used. Would appreciate if anyone can help me about that. Thank you very much.
Database Stored Procedure:
CREATE PROCEDURE [dbo].[USP_HTTP_POST]
@URL NCHAR(255),
@CONTENT NCHAR(1024),
@Result bit OUTPUT
AS
BEGIN
/***** Call Function to POST *****/
set @Result = NULL
EXECUTE @Result = [dbo].[udfHttpPost]
@URL,
@Content
END
Database Function:
CREATE FUNCTION [dbo].[udfHttpPost]
(@Url [nchar](255),
@Content [nchar](1024))
RETURNS [bit] WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [SqlServices].[SqlServices.HttpServices].[HttpPost]
VC# Assembly Code
using System;
using System.Configuration;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.Security;
using System.Security.Permissions;
using System.IO;
using Microsoft.SqlServer.Server;
namespace SqlServices
{
public class HttpServices
{
[SqlFunction(DataAccess = DataAccessKind.None)]
public static bool HttpPost(string Url, string Content)
{
Url = Url.TrimEnd();
Content = Content.TrimEnd();
string rawOutput = "";
//Get Access Right to Web
WebPermission p = new WebPermission(NetworkAccess.Connect,Url);
p.Assert();
//Prepare the WebRequest
WebRequest Req = (WebRequest)WebRequest.Create(Url);
Req.Timeout = 60000;
Req.Method = "POST";
Req.ContentLength = Content.Length;
Req.ContentType = "application/x-www-form-urlencoded";
StreamWriter PostWriter = new StreamWriter(Req.GetRequestStream());
PostWriter.Write(Content);
PostWriter.Close();
WebResponse Resp = Req.GetResponse();
StreamReader sr = new StreamReader(Resp.GetResponseStream());
rawOutput = sr.ReadToEnd();
sr.Close();
return true;
}
}
}
System Exception:
A .NET Framework error occurred during execution of user defined routine or aggregate 'udfHttpPost':
System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.CheckNReturnSO(PermissionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 unrestrictedOverride, Int32 create)
at System.Security.CodeAccessSecurityEngine.Assert(CodeAccessPermission cap, StackCrawlMark& stackMark)
at System.Security.CodeAccessPermission.Assert()
at SqlServices.HttpServices.HttpPost(String Url, String Content)
Everyday morning I email the sql query/stored procedure output results to the users, I was wondering if I can use some kind of t-sql code or DTS packages so that I can automate this process where I want to send the sql/stored proc results in the body of the email.
View 7 Replies View Relatedcan I send a mail by stored procedure?
View 5 Replies View RelatedHi Everybody,
I am trying to setup a stored procedure that runs through a Reminders table and sends an email to users based on DateSent field being smaller than todays date. I have already setup the stored procedure to send the email, just having trouble looping through the recordset.
Code Snippet
CREATE PROCEDURE [dbo].[hrDB_SendEmail]
AS
BEGIN
DECLARE @FirstName nvarchar(256),
@LastName nvarchar(256),
@To nvarchar(256),
@ToMgr nvarchar(256),
@Subject nvarchar(256),
@Msg nvarchar(256),
@DateToSend datetime,
@Sent nvarchar(256),
@ReminderID int,
@RowCount int,
@Today datetime,
@Result nvarchar(256)
-- Get the reminders to send
SELECT
@ReminderID = r.intReminderID,
@DateToSend = r.datDateToSend,
@FirstName = e.txtFirstName,
@LastName = e.txtLastName,
@To = e.txtEmail,
@Subject = t.txtReminderSubject,
@Sent = r.txtSent
FROM
(auto_reminders r INNER JOIN employee e ON r.intEmployeeID = e.intEmployeeID) INNER JOIN ref_reminders t ON r.intReminderType = t.intReminderTempID
WHERE
(((r.datDateToSend)<20/12/09) AND
((r.txtSent)='False'))
-- Send the Emails
WHILE(LEN(@To) > 0)
BEGIN
EXEC @Result = sp_send_cdosysmail @To, @ToMgr, @Subject, @Msg
END
-- Mark the records as sent
IF @Result = 'sp_OAGetErrorInfo'
BEGIN
SELECT @Sent = 'Error'
END
ELSE
BEGIN
SELECT @Sent = 'True'
END
UPDATE auto_reminders
SET
auto_reminders.txtSent = @Sent, auto_reminders.datDateSent = @Today
WHERE
intReminderID = @ReminderID
END
GO
From the code you can probably tell I am new to writing stored procedures, so I apologise for any obvious errors. My major problems are :-
how to loop through each record
how to get todays date
whether the struture of the procedure is correct
Also, if you think there is an easier way or a better method, please suggest it. I am open to any suggestions you may have,
Thanks in advance
Ben
Hi !
I have a problem with the unique identifier and don't know how to solve it.
I have a stored procedure, called from my ASP.NET page, which inserts a new record into a table. I need to get the Id of the row just inserted in order to use it as a parameter of another stored procedure which inserts a new row with this value and other values.
I tried with SCOPE_IDENTITY but i don't know how to ask for this value to the first stored procedure and stored it into an ASP variable.
Dim cmd As New SqlCommand
cmd.CommandText = "Insertar_Contacto"
cmd.CommandType = CommandType.StoredProcedure
cmd.Connection = connect
Thanks!!
Hello everyone,I need advice of how to accomplish the following:Loop though records in a table and send an email per record. Emailrecipient, message text and attachment file name - that's all changesrecord by record.Is it doable from a stored procedure (easily I mean, or am I better offwriting a VB app)? There are so many options of sending mail from SQLserver - CDONTS, SQL MAIL TASK, xp_sendmail. What's easier to implementand set up?Thanks a lot!!!(links and fragments of sample code would be greatlyappreciated)Larisa
View 2 Replies View RelatedFolks,Using NorthWind as Example: Parent Table derived from: Categories. I added a new Column E-Mail and Selecting rows where Category Id <=3. Here is my Data.
Category ID
Category Name
Category E-mail
1
Beverages
Beverages.com
2
Condiments
Condiments.com
3
Confections
Child Table derived from: Products. I am Selecting rows where Category Id <=3. Here is my Sample Data.
Category ID
Product Name
Quantity Per Unit
1
Chang
24 - 12 oz bottles
1
Côte de Blaye
12 - 75 cl bottles
1
Ipoh Coffee
16 - 500 g tins
1
Outback Lager
24 - 355 ml bottles
2
Aniseed Syrup
12 - 550 ml bottles
2
Chef Anton's Gumbo Mix
36 boxes
2
Louisiana Hot Spiced Okra
24 - 8 oz jars
2
Northwoods Cranberry Sauce
12 - 12 oz jars
3
Chocolade
10 pkgs.
3
Gumbär Gummibärchen
100 - 250 g bags
3
Maxilaku
24 - 50 g pkgs.
3
Scottish Longbreads
10 boxes x 8 pieces
3
Sir Rodney's Scones
24 pkgs. x 4 pieces
3
Tarte au sucre
48 piesI would like to read 1st Category Id, Category E-Mail from Categories Table (ie. Category Id = 1), find that in Products Table. If match, extract matching records for that Category from Both Tables (Categories.CategoryID, Products.ProductName, Products.QuantityPerUnit) and e-mail them based on E-Mail Address from Parent (Categories ) Table. If no E-Mail Address is listed, do not create output file. In this instance Category Id = 3.Basically I want to select 1st record from Parent Table (Here is Category) and search for all matching Products in Products Table. And Create an E-mail and sending just those matching records. Repeat the same process for remaining rows from Categories Table. I am expecting my E-Mail Output like this: For Category Id: 1
Category ID
Product Name
Quantity Per Unit
1
Chang
24 - 12 oz bottles
1
Côte de Blaye
12 - 75 cl bottles
1
Ipoh Coffee
16 - 500 g tins
1
Outback Lager
24 - 355 ml bottlesFor Category Id: 2
Category ID
Product Name
Quantity Per Unit
2
Aniseed Syrup
12 - 550 ml bottles
2
Chef Anton's Gumbo Mix
36 boxes
2
Louisiana Hot Spiced Okra
24 - 8 oz jars
2
Northwoods Cranberry Sauce
12 - 12 oz jarsI am not extracting the Data for any user Interface (ie. Grid View/Form View Etc). I will just create a Command Button in an ASP.NET 2.0 form to extract Data. My Tables are in SQL 2005. I was thinking to read the Category records in a Data Reader and within the While Loop, call a SP to retrieve the matching records from Products Table. If matching records found, call System SP_Mail to send the E-mail. The drawback with that for every category records (Within While Loop) I need to call my SP to get Products Data. Will be OVERKILL? Ideally I would like extract my records with one call to a SP. Is there any way I can run a while loop inside the SP and extract Child Data based on Parent Record? Any Help or sample URL, Tutorial Page will be appreciated. Thanks
Hi,I am trying to write a method which needs to call a stored procedure and then needs to get the response of the stored procedure back to the variable i declared in the method. private string GetFromCode(string strWebVersionFromCode, string strWebVersionString) { //call stored procedure } strWebVersionFromCode = GetFromCode(strFromCode, "web_version"); // is the var which will store the response.how should I do this?Please assist.
View 3 Replies View Relatedhi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi guys,I hope somebody can help as I am trying to write a procedure in SQL that will be an email reminder sent to users on every 5 th or the month if they don't submit data before.
I am quite new to sql and procedures in particular so I was hoping somebody can help.
I need to:
1.Check the day of the month, if not 5th do nothing
2.Get the date of the prevoious month (get current date - 1 month,set day to 1)this is the funny bit.
I have a field DateEntered,but users only select the month and the year on the acctual page,but when submitted it gets written as a full date and defaults to the 1st of the month.
3.Get the list of hospitals that haven't got data for the previous month
4.Email the hospitals.
DECLARE @returnDay int;
DECLARE @DateEntered datetime;
SELECT @returnDay = DatePart(day,GetDate())
If @returnDay = 5 (syntax error near 5)
BEGIN
SELECT @DateEntered = GetDate() - 30
Print DatePart(month, @DateEntered)
I was hoping somebody could look at this and help me.
thanks
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
hi there, i m newbie in using the ms sql server.i wouldlike to learn how to write the store procudure.i hope u all can guide me on this.
i have one table with data
appid int (PK)
leaveappid int (FK)
firstapproval int
firstapproval email varchar,
2nd approval int
2nd approval email varchar
resutl firstapproval
result secondapproval.
i would like to do a automatic send mail function where: the first mail will send to the firstapproval email.if after 2 days, the firstapproval no response(the result firstapproval is empty) then the email will automatic send to the second approval. how can i write the SP for this case? i really have no idea to start since i duno how to write the SP syntax and dont have the concept too.
hope can hear from u all soon.
thanx
Hi,I'm not sure if this is possible as i've googled everywhere, but i have aselect query that returns a customer record with their associated salesorders. I would like to automate a process which sends an email reminder toeach customer in the database, that has outstanding orders. This emailreminder should have the results of the query regarding their account.The table structure are as follows.---------------------Customer_tbl---------------------CustomerIDAccountNoNameEmailAddress---------------------Order_tbl---------------------OrderIDCustomerIDReferenceAmountDateOutstanding_flgCan anyone help?Sen.
View 2 Replies View RelatedI am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
We have a stored proc to send email in the MSDB database.
It works when processed in Query Analyzer.
In the app it gives us a permission error.
When I right click on the sp to give security, I do not see properties.
How do I give security to this stored proc?
Thanks
Hello to all,Can anybody please tell is SQl express 2005 suppoerts for send emails using stored porcedures?
Hi,
I have a string almost 11006 length.. when i try to send back from SQLCLR procedure
it says cannot send ..
here is Exception Text "Message length 11060 exceeds maximum length supported of 4000."
Max limit to send a string using pipe is 4000
How I can send a string which is large in size than 4000.
Thanks
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Is there a way to send binary file stored in SQL Server as email attachment without downloading it to the file system?
View 1 Replies View RelatedHi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You