How Do I Use Pass Data To/from Stored Procedure
May 2, 2006
Hello,
I read an article on how to use Yahoos API to GeoCode addresses. Based
on the article I created a stored procedure that is used as follows:
SPGeocode '2121 15st north' ,'arlington' ,'va' ,'warehouse-test'
Returns:
Latitude Longitude GeoCodedCity GeoCodedState GeoCodedCountry
Precision Warning
----------- ---------- ------------- ------------- ---------------
--------------- --------
38.889538 -77.08461 ARLINGTON VA US
Precision Good No Error
It returns Latitude and Longitude and other information. Works great.
In conjunction with Haversine formula, I can compute the distance
between two locations if I know the Lat and Long of the two points.
This can start to answer questions like "How many students do we have
within a 10 mile radius of Location X?"
(Marketing should go nuts over this :)
My question is how can i use my data from a table and pass it to the
SPGeocode via a select statement?
The table I would use is:
CREATE TABLE "dbo"."D_BI_Student"
(
"STUDENT_ADDRESS1" VARCHAR(50) NULL,
"STUDENT_ADDRESS2" VARCHAR(50) NULL,
"STUDENT_CITY" VARCHAR(50) NULL,
"STUDENT_STATE" VARCHAR(10) NULL,
"STUDENT_ZIP" VARCHAR(10) NULL
)
;
This is so new to me, I am not even sure what to search.
TIA
Rob
View 4 Replies
ADVERTISEMENT
Feb 2, 2004
I want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
View 7 Replies
View Related
Oct 12, 2005
How to pass a XML data parameter to an SQL 2005 Stored Procedure
I hope to insert a xml data into an typed xml column in SQL 2005.
1. I can run the Code 1 correctly.
2. I hope that I can pass a XML data parameter to an SQL 2005 Stored Procedure, So create the Code 2. but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: Only non-document nodes can be inserted. Found "xs:string ?".
3. I create the Code 3, but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: ',' or ')' expected
4. I create the Code 4, but I get the error below:XQuery: SQL type 'xml' is not supported in XQuery.
//--------------------------Code 1-------------------------------------create procedure Hellocw_InsertBookmark40@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert <x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 1-------------------------------------
//--------------------------Code 2-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 2-------------------------------------
//--------------------------Code 3-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert cast(sql:variable("@Insertxml") as xml)as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 3-------------------------------------
//--------------------------Code 4-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml xmlasupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId
//--------------------------Code 4-------------------------------------
View 2 Replies
View Related
Jul 5, 2007
Hi,
Using SSIS 2005 how is it possible to loop through a folder on the network, look at each file, pass the data inside each file as a string into a stored procedure.
Thanks
View 1 Replies
View Related
Jan 15, 2008
Dear All!
I use a "Execute SQL Task" to call a Stored Procedure. My Stored Procedure have an input parameter with type: ntext. And in "Execute SQL Task", I set variable in Parameter Mapping as following:
Variable Name: User::xmlDocument (this variable is a String to store xml data)
Direction: Input
DataType: NVARCHAR
ParameterName: 0
When length of "User::xmlDocument" is too large then error is happen but on the contrary, "Execute SQL Task" run successfully.
So, Can you show me how to pass large data into stored procedure using "Execute SQL Task"?
I am looking forward to hearing from you
Thanks
View 20 Replies
View Related
Feb 28, 2008
Hi,
I'm reasonably new to ASP.NET 2.0
I'm in my wizard_FinishButtonClick event, and from here, I want to take data from the form and some session variables and put it into my database via a stored procedure. I also want the stored procedure to return an output value. I do not need to perform a select or a delete.
For the life of me, I can't find a single example online or in my reference books that tells me how to accomplish this task using a SqlDataSource control. I can find lots of examples on sqldatasources that have a select statements (I don't need one) and use insert and update sql statements instead of stored procedures (I use stored procedures).
I desperately need the syntax to:
a) create the SqlDataSource with the appropriate syntax for calling a stored procedure to update and/or insert (again, this design side of VS2005 won't let me configure this datasource without including a select statement...which I don't need).
b) syntax on how to create the parameters that will be sent to the stored procedure for this sqldatasource (including output parameters).
c) syntax on how to set the values for these parameters (again...coming from form controls and session variables)
d) syntax on how to execute, in the code-behind, the stored procedure via the sqldatasource.
If anybody has sample code or a link or two, I would be most appreciative.
Thank you in advance for any help!
View 5 Replies
View Related
Jan 21, 2014
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
View 5 Replies
View Related
Feb 22, 2007
Hi,
i need to insert a record 1 or more times, depending of a variable in code-behind:dim amount as integeramount= value (e.g. 3)
My problem is: how to pass that variable to the stored procedure?I tried with this but nothing happens:
comd.Parameters.Add("@amount", SqlDbType.NVarChar, 10).Value = amount_of_details
Maybe is my stored procedure wrong?
Thanks
T.
Here is it:----------
ALTER PROCEDURE dbo.insert_table (@field1 nvarchar(10),...)ASDeclare @iLoopNumber intDeclare @amount intBEGIN TRAN
SET @iLoopNumber = 1
SET @amountr
While (@iLoopNumber <= @amount)
BEGIN
INSERT INTO table(field1,...)
VALUES (....))
SET @iLoopNumber = @iLoopNumber +1
End
COMMIT TRAN
View 3 Replies
View Related
Aug 11, 2007
How do I pass values from my ASP.NET page code into my Stored Procedure, to become parameters to be used in my Stored Proc?
Much thanks
View 2 Replies
View Related
Sep 19, 2005
Hi I have an if clause in my code to add the final parameter value to send to the database.
If Page.User.IsInRole("MICMS") Then
cmdCheckUser.Parameters.Add("@C_ID", 0)
Else
cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID"))
End If
If the user is in the role, the error is triggered saying that @C_ID
is expected by the stored procedure. If i then change the value from 0
to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.
View 1 Replies
View Related
Nov 30, 2005
hi,i am passing a xml file name to the stored procedure. the SP parses the file. but it is giving the error' INVALID AT THE TOP LEVEL OF THE DOCUMENT 'I expect this because of + and - in the xml file bafore the parent tags.how can i do the parser to eliminate these.
View 1 Replies
View Related
Mar 9, 2006
How can I pass a parameter to a stored procedure using Visual Web Developer 2005? I have created a SQLDataSource that calls the SP.
Thanks
--R
View 1 Replies
View Related
May 7, 2001
I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.
View 3 Replies
View Related
Jan 9, 2007
Dear All,
I am using sql2000, I want to know whether in stored procedure we can pass
array. Or is there any other solution to pass array of records
Please Guide Me
thanks
View 3 Replies
View Related
Jun 18, 2007
Hello,
I have a VB.NET stored procedure as below:
Code Snippet
Partial Public Class StoredProcedures
Public Shared Sub My_UpdateCountsManaged( ByRef paramInOut As Integer)
'here I perform update statement using "paramInOut" passed form calling code
.......
'then I return value to the calling code
paramInOut = 555
End Sub
End Class
Calling code specifies a parameter like this:
Code Snippet
Dim param as Sqlparameter = New SqlParameter("@paramInOut", SqlDbType.Int)
param.Direction = ParameterDirection.InputOutput
param.Value = 999
cmd.Parameters.Add(param)
When I execute the code, it surely gets back "555" from SP, the problem is that SP never gets "999" from calling code despite ParamDirection is InputOutput. It always receives 0. I am afraid I don't understand something fundamental ?
Any help would be appreciated.
Thanks a lot,Fly.
View 4 Replies
View Related
Feb 1, 2008
Hi,
I want to pass an xml file to stored procedure in SQL Server 2000 as a parameter.
Can we pass the xml file path as a parameter? if not then how can it be done.
I want to serialize data to XML and then pass it to a procedure to insert data.
Kindly help ASAP.
Thanks
View 4 Replies
View Related
May 16, 2008
When I run the following code I get error "Incorrect syntax near 'MyStoredProcedureName".
Code Snippet
public static string GetWithDate(string date)
{
string connString = System.Configuration.ConfigurationManager.ConnectionStrings["Development"].ToString();
SqlConnection conn = new SqlConnection(connString);
conn.Open();
XmlDocument xmlDoc = new XmlDocument();
SqlCommand cmd = new SqlCommand("usp_SVDO_CNTRL_GetPalletChildWorkExceptions", conn); //sw.WriteLine(count++);
cmd.Parameters.Add(new SqlParameter("@date", date));
try
{
cmd.ExecuteReader();
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
SqlDataReader rdr = cmd.ExecuteReader(); //<---Bombs
if (conn != null)
conn.Close();
return xmlDoc.InnerXml;
}
I'm assuming this is because my Date is in the wrong format when .NET passes it. I've tested the stored procedure directly in SQL Server Managent Studio and it works (Format of date is '5/15/2008 9:16:23 PM').
View 3 Replies
View Related
Apr 29, 2008
How can I pass a parameter to a stored Procedure from another stored procedure in SQL 2005?
Thnak you,
View 3 Replies
View Related
Apr 3, 2007
In the snippet below, ExecuteSqlString is a stored procedure that accepts one parameter. SelectChangeDropdownRowsource is a function in my code behind page that generates the string I want to pass. I can't seem to find the correct syntax to get it to work. The way it is show below, the error comes back about incorrect syntax near ')' . Is this doable?
<asp:SqlDataSource ID="ChangeInfo" runat="server" ConnectionString="<%$ ConnectionStrings:xxx %>"
DataSourceMode="DataReader" ProviderName="<%$ ConnectionStrings:xxx %>"
SelectCommandType=StoredProcedure
SelectCommand="ExecuteSqlString">
<selectparameters>
<asp:parameter name="sqlString" Type=String DefaultValue=SelectChangeDropdownRowsource()/>
</selectparameters>
</asp:SqlDataSource>
View 6 Replies
View Related
Jun 7, 2007
I am trying to inject dynamically generated text into a Sql2000 stored procedure. What am I doing wrong?A code behind routine generates the following string value based on a visitor entering 'sail boats' in TextBox1. The routine splits the entry and creates the below string.Companies.L_Keywords LIKE '%sail%' AND Companies.L_Keywords LIKE '%boats%'
I am trying to place this string result in the WHERE statement of a Sql2000 Stored Procedure using parameter @VisitorKeywords.
PROCEDURE dbo.KWsearchAS SELECT DISTINCT Companies.L_Name, Companies.L_ID, Companies.L_EnabledWHERE ( @visitorKeywords ) AND (Companies.L_Enabled = 1)ORDER BY Companies.L_Name
I am wanting the resulting WHERE portion to be:
WHERE ( Companies.L_Keywords LIKE '%sail%' AND Companies.L_Keywords LIKE '%boats%' ) AND (Companies.L_Enabled = 1)
Thank you
View 10 Replies
View Related
Oct 29, 2007
hi,
i searched a lot to find how to pass an orderBy parameter finally i used a case block in my code and it works now how can i add a second parameter for ascending and descending order(@sortAscOrDesc)
when i use it after the end of case statement i get error
here is my sp:CREATE PROCEDURE [userPhotos]
@userID int,@orderBy varchar(100)
ASSELECT ID,UserID,Photo,ALbumID,Title,views,date_added from userAlbumPic where userID=@userID and albumID=0 order by
case @orderBy
when 'date_added' then date_added
when 'views' then [views]
else date_added
end
GO
View 7 Replies
View Related
Dec 18, 2007
i am trying to pass a large XML file from VS2005 (web service layer) to stored procedure (SQL Server 2000)In my stored procedure, the input parameter takes as "nText" (which will be XML file)Question:While performing ExecuteNonQuery, i am getting request timeout i think this is coz of large XML file i am passing.can anyone plz tell me how to pass XML file to SP...it would be better if you can provide me with some codei am completely new to this XML file passing between web service and SP...... thanks a lot in advance.....
View 7 Replies
View Related
Feb 19, 2008
I have stored procedure that expects 2 input parameters (@UserID uniqidentifier and @TeamID int). My datasource is SQLDataSource. So i need to pass parameters to SP..When i add parameters ans execute i got an error "....stored procedure expects @TeamId parameter, which was not supplied" But i pass them. How should i pass parameters? Maybe the reason is some mismatching of parametrs. 1 Parameter [] param = new Parameter[2];
2
3 param[0] = new Parameter();
4 param[0].Name = "@TeamID";
5 param[0].Type = TypeCode.Int32;
6 param[0].Direction = ParameterDirection.Input;
7 param[0].DefaultValue = "1";
8
9 param[1] = new Parameter();
10 param[1].Name = "@UserID";
11 param[1].Direction = ParameterDirection.Input;
12 param[1].DefaultValue = "edf26fd8-d7cd-4b32-a18a-fc888cac63ef";
13 param[1].Type = TypeCode.String;
14
15 dataSource = new SqlDataSource();
16 dataSource.ID = "Source";
17 dataSource.ConnectionString = settings.ToString();
18
19 dataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
20 dataSource.DataSourceMode = SqlDataSourceMode.DataReader;
21 dataSource.SelectCommand = "dbo.GetAprfAssessmentTeamData";
22
23
24 dataSource.SelectParameters.Add(param[0]);
25 dataSource.SelectParameters.Add(param[1]);
26
View 4 Replies
View Related
Mar 26, 2008
Hi,
I want to create a stored procedure which I can pass multi parameters. This is what I need, I have a gridview which is used for displaying customer info of each agent. However, the number of customers for each agent is different. I will pass customer names as parameters for my stored procedure. Here is a sample,
CREATE PROCEDURE [dbo].[display_customer]
@agentID varchar(20),
@customer1 varchar(20),
@customer2 varchar(20),
..... -- Here I do know how many customers for each agent
AS
SELECT name, city, state, zip
FROM rep_customer
WHERE agent = @agentID and (name = @customer1 or name = @customer2)
Since I can not decide the number of customers for each agent, my question is, can I dynamically pass number of parameters to my above stored procedure?
Thanks a lot!
View 6 Replies
View Related
Apr 7, 2008
hi friends,i need to select some of the employees from the EmpMaster using in clause. I tried to pass a string with the comma delemeters. it didn't produce all the records except the first in that string.shall i try with string functions in TSQL or any other options? Thanks and Regads,Senthilselvan.D
View 4 Replies
View Related
Jun 5, 2008
Either method is in the “ASPX� file
This is a DataSource for a “DetailsView� which has on top of “DeleteCommand� an “InsertCommand� a “SelectCommand� and an “UpdateCommand�. It is related to a GridView and the “@DonationRecID� comes from this GridView.
Method 1. Using an SQL Query – this works fine <asp:SqlDataSource ID="donationDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:FUND %>" DeleteCommand="DELETE FROM [Donations] WHERE [DonationRecID] = @DonationRecID">
Method 2. – using a stored procedure – this bombs because I have no clue as to how to pass “@DonationRecID� to the stored procedure "Donations_Delete". <asp:SqlDataSource ID="donationDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:FUND %>" DeleteCommand="Donations_Delete" DeleteCommandType="StoredProcedure"> How do I pass “@DonationRecID� to the "Donations_Delete" stored procedure?
Does anyone have an example of how I can do this in the “ASPX.CS� file instead.
View 3 Replies
View Related
May 11, 2005
sSQL = "spBPT_Fuel_Set_Status_Approved"
cmdDailyPrices.CommandText = sSQL
cmdDailyPrices.Parameters.Add("@user", "Philippe")
cmdDailyPrices.Parameters.Add("@verbose", "0")
cmdDailyPrices.Parameters.Add("@Day_1_add", rowBand1.Cells(DayParameters.AddFactor).Value)
cmdDailyPrices.Parameters.Add("@Day_1_multiply", rowBand1.Cells(DayParameters.MultiplyFactor).Value)
cmdDailyPrices.Parameters.Add("@Day_2_add", "NULL")
cmdDailyPrices.Parameters.Add("@Day_2_multiply", "NULL")
For @Day_2_add and @Day_2_multiply parameters I want to pass the value as NULL not string "NULL"
could you please let me know how to do this?
Thanks
View 1 Replies
View Related
Nov 30, 2005
hi,i have created a stored procedure to read xml dataCREATE PROCEDURE InsertXML(@xml varchar(1000)) AS DECLARE @XmlHandle intEXEC sp_xml_preparedocument @XmlHandle output,@xmlinsert into Employee(Name,ID,Sal,Address) (SELECT Name,ID,Sal,AddressFROM OPENXML (@XmlHandle, 'emp:EmployeeDetails/emp:Employee',2) WITH (Name varchar(30) 'Name', ID int 'ID', Sal int 'sal', Address varchar(30) 'Address'))EXECUTE sp_xml_removedocument @XmlHandlebut it is taking only xml text as input.but i want to send the file name as input.how to do it.
View 2 Replies
View Related
Nov 17, 2006
Currently i am working in a project of report generation in MS ACCESS.
The tables are in sql server 2000.
I have to write stored proc in ms access.
Illustration:
I am having a stored proc as follows
name: myproc
-------------------
Create procedure my_proc
@f1 char(1),
@f2 char(5)
As
select * from table1 where field1=@f1 and field2=@f2
________________________________________________
and calling proc
name: call_myproc
execute my_proc 'A','2004'
If i am getting the vales of field1/@f1 and field2/@f2 from forms in ms access.
I have to get the values from forms in ms access.
I have to write the calling proc as follows
my_proc [forms]![form_a].[Combo4],[forms]![form_a].[text12]
But ms access throws syntax error.
How is it possible to pass values from ms access FORMS to a calling stored procedure.
I have followed the way of creating and executing the stored procedure as given in the article as follows.
http://www.databasejournal.com/features/msaccess/article.php/10895_3363511_1
As per the given link. They did not give values dynamically.
could you please help me to fix this problem ?
regards,
Krishna
View 1 Replies
View Related
Aug 30, 2007
Hi,
I need to automate the procedure of selecting column with numeric and passing those column values as string to another stored procedure.
Here is sample code :
CREATE procedure procdeure1 @Utility varchar(50) WITH RECOMPILE
as
if @Utility='Electricity'
begin
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmers1')
DROP TABLE gmmers1
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmers2')
DROP TABLE gmmers2
create table gmmers1(sitecode varchar(15),
Gen_Electricity_Usage bigint
)
create table gmmers2 (gmmerssitecode varchar(15),
Gmers_Electricity_Usage bigint
)
insert into gmmers1
Select site.Sitecode,sum(isnull(AcctRptdata.ElectricityUse,0)*factor) as 'Electricity Usage'
From GEN..AcctRptdata AcctRptdata, GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings
Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and
--((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and
((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and
site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')
and len(sitecode ) = 8
and AcctRptdata.idsvc in (100) and
SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitElec and
SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 1
and site.Sitecode not like '%B%'
and site.sitecode not like '9999%'
and AcctRptdata.ElectricityUse >0 --Added on 16th Aug
and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)--= 11)
--and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11)
Group by site.Sitecode having sum(AcctRptdata.ElectricityUse*factor) > 0 Order by site.Sitecode
insert into gmmers2
select left (sitecode, 8) BU, sum(isnull(KWh_Purchased_Quantity, 0 )) as 'electric use' from gmers_prodn..electricity_data
where sitecode in --(select sitecode from facility_data where left (sitecode ,8) in
(select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 )
-- and len (sitecode) = 11)
and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01'
--and sitecode like 'A0916323%'
and sitecode not like '%B%' and left(sitecode,8) not in ('N0010024','N0010088','N0010101','N0010173',
'N0010373','N0010447') and sitecode not like '9999%'
group by left (sitecode, 8) order by left (sitecode, 8) -- yyyy-mm-dd
select *,(Gen_Electricity_Usage-Gmers_Electricity_Usage)as Diff from gmmers1,gmmers2
where gmmers1.sitecode=gmmers2.gmmerssitecode and (Gen_Electricity_Usage-Gmers_Electricity_Usage) <>0
end
else if @UTILITY='GAS'
begin
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gengas')
DROP TABLE gengas
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmersgas')
DROP TABLE gmmersgas
create table gengas(sitecode varchar(15),
Gen_Gas_usage bigint
)
create table gmmersgas (gmmerssitecode varchar(15),
Gmers_Gas_Usage bigint
)
insert into gengas
Select site.Sitecode,sum(isnull(AcctRptdata.NaturalGasUse,0)*factor) as 'Gas Usage' From GEN..AcctRptdata AcctRptdata,
GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings
Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and
--((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and
((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and
site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')and
len(sitecode ) = 8 and AcctRptdata.idsvc in (200,300) and
SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitGas and
SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 61
and site.sitecode not like '%B%' and site.sitecode not like '9999%'
and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)
and AcctRptdata.NaturalGasUse >0 ----Added on 16th Aug
--and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11)
Group by site.Sitecode having sum(AcctRptdata.NaturalGasUse*factor) > 0 Order by site.Sitecode
insert into gmmersgas
select left( sitecode, 8 ) BU , sum(Utility_Natural_Gas_Volume) as 'gas use' from GMERS_PRODN..fuel_data
where sitecode in --(select sitecode from facility_data where left (sitecode,8) in
(select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 )
-- and len(sitecode )= 11 )
and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01'
and sitecode not like '%B%' and sitecode not like '9999%'
group by left( sitecode, 8 ) order by left( sitecode, 8 )
select *,(Gen_Gas_usage-Gmers_Gas_Usage)as Diff from gengas,gmmersgas
where gengas.sitecode=gmmersgas.gmmerssitecode and (Gen_Gas_usage-Gmers_Gas_Usage)<>0
end
My aim is to pass sitecode having difference <>0 and from date and todate as an parameter to another stored procedure which updates sitewise for the utility so that in case a particular sitecode with same date range is included in one utility it should not be repeated in another utility.
View 1 Replies
View Related
Dec 16, 2005
Hi all,Seems like a fundamental question to me but I dont have a definiteanswer for it, Gurus please enlighten me.I have a table 'Table1' whose structure changes dynamically based onsome configuration values from another table. This table is being usedby a program, It was initially used by this program which ran as asingle task (executing at only a specific interval) but now the programhas to be run mutiple times some coinciding with each othe - whichmeant that table structure will change as 2 programs are runningsimultaneously... and therefore I have decided to use seperate tablenames that each has a structure of its now.I use this table name 'Table1' in about 10-15 stored procedures andUDF'sto make the long story short: Since I will not know which table I willbe using in the program I want to pass the table name as an argument tothe SP and UDF's and then access this param in the'select's/updates/inserts' - but this doesn't work unless I use DynamicSQL.Is there any other way of passing table names as parameters and thenusing then in the procs?any ideas will be really helpful.adi
View 5 Replies
View Related
Dec 2, 2007
Hi,
I have a kind of problem. In SQL Server I have a stored procedure ressembling this:
Code Block
ALTER PROCEDURE procedure1
(
@param int
)
SELECT * FROM table WHERE param = @param
Now I want to call this procedure and pass it to a cursor. We all know you can do this:
Code Block
DELCARE cursor1 CURSOR for
SELECT * FROM table WHERE param = @param
.. , but I want something like this:
Code Block
DECLARE cursor1 CURSOR for
EXEC procedure1 @param
Is it possible? I could solve it in another, but then I have to connect 2x to the database, which is less performant.
I have also tried something like this:
Code Block
ALTER PROCEDURE procedure1
(
@param int
)
SELECT @test = id FROM table WHERE param = @param
RETURN @test
ALTER PROCEDURE procedure2
(
@param int
)
DECLARE @var varchar(100)
EXEC @var = procedure1 @param
But then it returns always 0.
So is there a way to pass a procedure's select to a cursor?
Thanks in advance
Stevevil0
View 1 Replies
View Related
Mar 16, 2007
this is the error ...
An error has occured during report processing.
Query execution failed for dataset 'dataset name'
Procedure 'procedure name ' expects parameter '@StartDate', which was not supplied
View 3 Replies
View Related
