I need to run a sequel statement in a stored procedure and get if it found any records because the next statements depend on if records were found or not. How do I do this?
View 6 Replieshi all,
i'm wondering if i can use one stored procedure in too cases, this is the senario:
i have stored procedure for admin and another one for user, they have the same select everything is the same except that in admin SP i have where @admin = admin and for user i have where @user = user
if there a way to use if and else to make this happen
this is what i did so far:
CREATE PROCEDURE [test] @admin INT, @user INT, @indexType INT as
if @indexType = 1
begin
SELECT * FROM table WHERE something IN (SELECT * FROM anothertable where admin = @admin)
end
else
begin
SELECT * FROM table WHERE user = @user
end
GO
any suggestion will be very helpful
thanks
Hi,
I have two tables A and B. In table A i have three columns called empid, empname and empsalary where empid is an identity column. Table A has some records filled in it. Table B has the same schema except the fact that the empid is not an identity column in table B. Table B does not contain any rows initially. All other aspects remain the same as that of table A. Now i am going to delete some records in table A based on the empid. When i delete the records in table A based on empid the deleted records should be inserted into table B with the same empid. I need to accomplish these two tasks in a single stored procedure. How to do it? I need the entire code for the stored procedure. Please help me. I am trying for the past 4 days.
Thanx in Advance
Hi, got a problem and can't figure this one out.
basically i've got a field containing a value '(14)(12)(33)(22)' and i want to compare it to a table containing those values in separate cells...
record 1 : (01)
record 2 : (02)
etc...
and i want to compare this one field to those records to see whether that text string contains anything the table contains.
i've tried ContainsTable & IN but still can't figure this out.
any help greatly appreciated
:o
I have a query that brings back the data below. I need to divide the BudgetTotal by the Count. Then I need to go to the records that make up those €śgroups€? and enter a Budget value = BudgetTotal/Count.
How could I write this in a stored procedure or a SQL statement if possible?
Thanks.
Kevin
SELECT TOP 100 PERCENT dbo.ReportTable.ProjectNo, dbo.ReportTable.Category, dbo.ReportTable.Type, COUNT(dbo.ReportTable.ProjectNo) AS count,
dbo.ReportTable.Budget, dbo.OracleDownloadBudget.Budget AS Expr1
FROM dbo.ReportTable INNER JOIN
dbo.OracleDownloadBudget ON dbo.ReportTable.Category = dbo.OracleDownloadBudget.Category AND
dbo.ReportTable.ProjectNo = dbo.OracleDownloadBudget.Project AND dbo.ReportTable.Type = dbo.OracleDownloadBudget.Type
GROUP BY dbo.ReportTable.ProjectNo, dbo.ReportTable.ProjectName, dbo.ReportTable.Category, dbo.ReportTable.Type, dbo.ReportTable.Budget, dbo.OracleDownloadBudget.Budget
HAVING (dbo.ReportTable.Budget < 1)
ORDER BY dbo.ReportTable.ProjectNo
ProjectNo
Category
Type
Count
Budget
BudgetTotal
100143
Travel
Travel, Meals, No Report IRS
2
0
300.27
100146
Travel
Travel Costs, Training (all)
1
0
300.27
100164
Supplies & Materials
Supplies, Educational
1
0
300.27
100167
Equipment
Eq NonCapital Desktop Comp
1
0
300.27
100170
Faculty Salaries
FB, Faculty
11
0
300.27
100170
Faculty Salaries
Salary, Faculty, T&R FT
11
0
300.27
100170
Wages
Wages, Student
2
0
300.27
100171
Faculty Salaries
FB, Faculty
19
0
300.27
100171
Faculty Salaries
Salary, Faculty, T&R FT
19
0
300.27
100176
Scholarships & Fellowships
Fell, Assist, Out, Grad
1
0
300.27
100177
Scholarships & Fellowships
Fell, Assist, In, Grad
1
0
300.27
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
Can I invoke stored procedure stored inside from a user defined table column?
View 5 Replies View RelatedHello, I try to use Stored Procedure with SQL Server 2005. I was created a new procedure in my dbb "GetIDTransaction" set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:<Author,,Name>
-- Create date: <Create Date,,>
-- Description:<Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[GetIDTransaction]
-- Add the parameters for the stored procedure here
@DateTransation NVarChar(50),
@ID int OUTPUT
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
INSERT INTO Transactions_Guichet (DateTransaction, RefExpay,Montant,AccesRestreint,Valide,AdresseEmail,ClePerso,RemonteeBackOffice) VALUES(@DateTransation,'', '0','0','0','','','')
SET @ID=SCOPE_IDENTITY()
RETURN
in SqlConnection oConnection = new SqlConnection(strConString);
SqlCommand oCommand = new SqlCommand("GetIDTransaction", oConnection);
oCommand.CommandType = CommandType.StoredProcedure;
//Création de la dateTransaction
SqlParameter oParam = oCommand.Parameters.Add("@DateTransation", SqlDbType.DateTime, 8, "DateTransation");
oParam.Value = DateTime.Now.ToString();
SqlParameter oParam2 = oCommand.Parameters.Add("@ID", SqlDbType.Int, 0, "IdTransaction");
oParam2.Direction = ParameterDirection.Output;
//Ouverture de la connection
oConnection.Open();
//Récupère Id
oCommand.ExecuteNonQuery();
iIDTransation = Convert.ToInt32(oParam2.Value);
But i have always the same error Stored Procedure '' not found Thanks for you help
I'm trying to fill a dataset with the following code, but i'm getting an error that the stored procedure cannot be found. Do you see anything I could be doing wrong? Thanks
1 Dim ds As New DataSet
2 Dim sda As SqlDataAdapter
3 Dim strSQL As String
4
5
6 Dim conn As New SqlConnection(Application("ConnectionString"))
7 conn.Open()
8
9 strSQL = "getEmployeInfo_proc '" & strOfficeID & "'"
10 sda = New SqlDataAdapter(strSQL, conn)
11 sda.Fill(ds, "Attorneys")
12 dgResults.DataSource = ds.Tables("Attorneys")
13 dgResults.DataBind()
14 conn.Close()
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
I want to execute some insert statements within a stored procedure and commit those changes regardless of any raiseerror that occurs later in the stored procedure. My difficulty is that I am forced to use raiseerror with severity 16 in order to send a message through the powerbuilder application interface (compiled vendor code). I have tried save points but can't get that to save my insert and still present an error to the user about something else that happens later.
here is an example
BEGIN procedure
Insert something and save it even if error is raised below
RaiseError('you made a mistake and need to do this.',16,-1)
END procedure
Hi folks
I nead to call a stored procedure in a where statemene, but MSSQL dont like that.
My problem is that the StoredProcedure is calling itself recursive and therfore its impossible to add the code as a standard SELECT statement. Here is the code
ALTER PROCEDURE dbo.advsp_FilterRecordRights
@RequesterGUID Char(20),
@EntityGUID Char(20)
AS
BEGIN
if not Exists(Select *
from GUIDRightsH
where GUIDRightsH.EntityGUID = @EntityGUID and
GUIDRightsH.RequesterGUID = @RequesterGUID and
GUIDRightsH.RecProp <> 0)
Begin
Return 1
end
if not Exists(Select *
from UsergroupMembers
where UserGroupMembers.UsergroupGUID = @RequesterGUID and
dbo.advsp_FilterRecordRights(UserGroupMembers.UserGUID,@EntityGUID) = 1)
Begin
Return 1
end
Return 0
END
Basically I have two strings. Both strings will contain similar data because the 2nd string is the first string after an update of the first string takes place. Both strings are returned in my Stored Procedure
For example:String1 = "Here is some data. lets type some more data"String2 = "Here's some data. Lets type some data here"I would want to change string2 (inside my Stored Procedure) to show the changed/added text highlighted and the deleted text with a strike though.
So I would want string2 to look like thisstring2 = "Here<font color = "#00FF00">'s</font> <strike>is</strike> some data. <font color = "#00FF00">L</font>ets type some <strike>more</strike> data <font color = "#00FF00">here</font>"
Is there an way to accomplish this inside a stored procedure?
This example is working:
Declare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY LastActivityDate DESC) AS Row, UserId, UserName FROM aspnet_Users) SELECT UserId, UserName FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
and this one doesn't work:USE [xx]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[battle_Paging]@PagerIndex INT,@ShowMembers INT ASBEGINDeclare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY aspnet_Users.LastActivityDate DESC) AS Row, aspnet_Users.UserId, aspnet_Users.UserName, mb_personal.Avatar FROM aspnet_Users LEFT JOIN mb_personal ON (mb_personal.UserID=aspnet_Users.UserId) SELECT UserId, UserName, Avatar FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
Error:Msg 156, Level 15, State 1, Procedure battle_Paging, Line 18Incorrect syntax near the keyword 'SELECT'.
I try to join in the table mb_personal here. Some help would be very appreciated! Thanks.
Hello, I have a situation that I query a table and return multiple rows (email addresses). I want to iterate through the rows and concatenate all email addresses into one string (will be passing this to another stored procedure to send mail). How can I process result rows inside a stored procedure? This is what I have so far: CREATE PROCEDURE [dbo].[lm_emailComment_OnInsert] @serviceDetailID int,@comment varchar(500),@commentDate DateTime,@commentAuthor varchar(100)ASBEGINDECLARE @serviceID intDECLARE @p_recipients varchar(8000)DECLARE @p_message varchar(8000)DECLARE @p_subject varchar(100)/* Grab the Service_id from underlying Service_Detail_id*/SELECT @serviceID = Service_id FROM lm_Service_Detail WHERE Service_Detail_id = @serviceDetailID/* Get email addresses of Service Responsible Parties */
SELECT DISTINCT dbo.lm_Responsible_Party.EmailFROM dbo.lm_Service_Detail INNER JOIN
dbo.lm_Service_Filing_Type ON dbo.lm_Service_Detail.Service_id = dbo.lm_Service_Filing_Type.Service_id INNER JOIN
dbo.lm_Responsible_Party_Filing_Type ON dbo.lm_Service_Filing_Type.Filing_Type_id = dbo.lm_Responsible_Party_Filing_Type.Filing_Type_id INNER JOIN
dbo.lm_Responsible_Party ON dbo.lm_Responsible_Party_Filing_Type.Party_id = dbo.lm_Responsible_Party.Party_idWHERE (dbo.lm_Service_Detail.Service_Detail_id = @serviceDetailID)/* Build message */
SET @p_subject = "KLM - Service ID: " + CAST(@serviceID AS varchar(4))SET @p_recipients = "" /*need string of addresses*/
SET @p_message = @p_message + "Service Detail ID: " + CAST(@serviceDetailID AS varchar(4)) + char(13)SET @p_message = @p_message + "Comment Date: " + CAST(@commentDate As varchar(25)) + char(13)SET @p_message = @p_message + "Comment Author: " + @commentAuthor + char(13)SET @p_message = @p_message + "Comment: " + @comment + char(13)PRINT "subject: " + @p_subject + char(13)PRINT "recip: " + @p_recipients + char(13)PRINT "msg: " + @p_message + char(13)/*Send the email*/
Execute master..xp_sendmail @recipients = @p_recipients, @message = @p_message, @subject = @p_subject END
GO
I am having problem with 'TOP @pageSize'. It doesn't work, but if I replace it by 'TOP 5' or 'TOP 6' etc., then the stored procedure runs without errors.
Can someone please tell me how I could use @pageSize here so that it dynamically determines the 'n' of 'TOP n' ?
ALTER PROCEDURE dbo.spGetNextPageRecords
(
@pageSize int,
@previousMaxId int
)
AS
/* SET NOCOUNT ON */
SELECT Top @pageSize ProductId, ProductName
FROM Products
WHERE (ProductID > @previousMaxId) order by ProductId
RETURN
Hello :) I need to do something like this:
CREATE PROCEDURE SelectCostumers @name varchar(100)
Declare @SQL = "SELECT Id, Name FROM Costumers"
AS
IF (@name IS NULL)
@SQL
ELSE
@SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Thank you
I am trying to creating a table inside a stored procedure using SQL that works fine in Query Analyzer. However, when I check the syntax I get the following message:
Error 208: Invalid object name '##OPTIONSEX'
I am using the following SQL script:
CREATE PROCEDURE [dbo].[Test2] AS
CREATE TABLE ##OPTIONSEX
(
OPTION_PLAN VARCHAR(50),
TOT_OPTIONS_EXCHANGED FLOAT NULL
)
GO
INSERT ##OPTIONSEX
SELECT
B.COMPONENT,
TOT_OPTIONS_EXCHANGED = SUM(A.UNITS)
FROM TBLEXERCISEOPTIONS A, TBLCOMPONENT B
WHERE B.COMPONENTID = A.COMPONENTID
GROUP BY B.COMPONENT
GO
Any help getting this to run correctly would be appreciated.
Hi Folks!
I have a cursor inside a stored procedure that should identify rows based on certain criteria and update the columns on those records.
While I try to do so, the cursor goes into an infinite loop although I have only 1 record that matches my criteria. I think that the transaction is not commited and the cursor is picking up the same record for update.
Here is my sample record in table :tblMsg
SenderRef <space> MsgStatusId <space> MsgType <space>Groupid
1281341<space> 1 <space>KBC-NON-ETC-MATCHED-BLIM <space>191902
1281341 <space>18 <space>KBC-RCVD-ADM <space>191902<space>
and here is my code.
CREATE PROCEDURE msg_ResolveADMBeforeBlim
AS
DECLARE @blimGroupId AS INT
DECLARE @admSenderRef AS VARCHAR(50)
DECLARE admCursor CURSOR FOR
SELECT senderref
FROMtblMsg
WHERE msgstatusid = 18
AND msgtype = 'KBC-RCVD-ADM'
FOR UPDATE
OPEN admCursor
FETCH NEXT FROM admCursor INTO @admSenderRef
WHILE @@FETCH_STATUS = 0
BEGIN
--FIND CORRESPONDING BLIM RECORD AND GRAB ITS GROUPID TO UPDATE THE ADM
SELECT @blimGroupId = GroupID
FROM tblMsg
WHERE msgType = 'KBC-NON-ETC-MATCHED-BLIM'
AND SenderRef = @admSenderRef
PRINT 'AFTER SELECT INSIDE WHILE: Senderref- >' + @admSenderRef;
--UPDATE THE ADM RECORD WITH THE GROUPID AND MSGSTATUS = 3
BEGIN
UPDATE tblMsg
SET MsgStatusId = 3, GroupId = @blimGroupId
WHERE CURRENT OF admCursor
END
PRINT 'AFTER UPDATE INSIDE WHILE';
END
CLOSE admCursor
DEALLOCATEadmCursor
The update statement was included beteween a BEGIN TRAN and END TRAN. But no joy.
Any ideas why this would happen?
Thanks for your help.
Arun
Okay, so I have a problem and I would be REALLY grateful for anyassistance anyone can offer because I have found little or no help onthe web anywhere.I want to access and do joins between tables in two different SQL db'son the same server. Heres what Im dealing with.In one database resides all of my security features for our clients,where it decides who can login, etc etc....In another database, I need to cross reference with a few fields in mysecurity db.See the issue Im running into here is that because the way the peoplehave their databases set up for different products, I would normallyhave to put these tables with security features in every database...which is horrible, because every time I do an update I would have todo it in 12 different places. Thats not efficient at all.So I thought if I had one central DB, where all security features arecontrolled from, that would be perfect... now the issue is crossreferencing and doing joins with other tables that ARENT in the samedb....have I lost you yet?I appreciate all of your help!THANKS!!
View 5 Replies View RelatedHi for all
i just get the news that the Dec. CTP of SQL Server 2005 & tools is released !
but my dream is to see debugging stored procedure support inside the SSMSE as debugging applications inside Visual Studio 2005
Many many many thanks to Microsoft and for the great efforts on the cool products
Mohamed
Hi,
I have to write a stored procedure what repair a table.
It have to delete lost rows before make relation to itself (PK column is 'Kw_KeywordID', FK column is 'Kw_ParentID').
I do not found the way to write this procedure to can create statement from parameter of the procedure.
I would like to pass the table name, but I receive error if the query like 'Select ... Form @Table ....'.
If the parameter is in the 'WHERE', nothing problem.
My procedure is:
CREATE PROCEDURE sp_Repair_IS_KW_AbtKz176
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
declare @OrphanRowCount int
select @OrphanRowCount = 1
while(@OrphanRowCount > 0)
begin
DECLARE KWCursor CURSOR FOR
SELECT count(*) AS cRowCount FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176);
OPEN KWCursor;
FETCH NEXT FROM KWCursor INTO @OrphanRowCount
CLOSE KWCursor
DEALLOCATE KWCursor
IF (@@FETCH_STATUS = 0) AND (@OrphanRowCount > 0)
BEGIN
exec('DELETE FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176)')
END
end
END
GO
How can I run fully parameterized queries from an SP.
I can make it only like exec('DELETE FROM' + @TableName + ...)
Thank you for any idea,
Imre
Dear all,i'm facing a problem with my storedprocedure which happened when i ran my web application and reach to the point where my class invoke this storedprocedure,my SP contains a cursor that built his sql according to certain condition, so i put the "SET @cur Cursor For....." inside the if block (definitely i've declared it under AS keyword directly) and this SP is working well inside sql server(I've tested it), BUT when my ASP.net code invoke this SP it gives me the following error : "The Variable @cur does not currently have a cursor allocated to it" repeated as much as there are IF clauses in my SP,Please Help.Regards,
View 1 Replies View RelatedI want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
Hi,
I'm new to ASP.NET 2.0. I have a sqldatasource and a formview controls on a web page and inside the formview control I have two textboxes. When I click the UPDATE button in the formview, I'd like to be able to retrieve the values of the textboxes inside the formview control and pass these values to a 'Update' SQL stored procedure defined in the Sqldatasource.
Does anyone know how I can do this? Hope my question is clear.
Thanks in advance.
hakl
Friends,
What are the possible usuages of a SELECT query stmt inside a stored procedure ??
How can we process the results of the SELECT query other than for documentation/Reporting purposes(Correct me if i'm wrong in this) ??
can any one throw some lite on this ..
Thanks,
SqlPgmr
I use the context connection for the "normal" work in the CLR procedure.
View 7 Replies View Relatedproblem convet date
Code Snippet
DECLARE
@y_Date [varchar](4),@M_Date [varchar](2),@d_Date [varchar](2)
DECLARE @mydate [datetime]
set @y_Date='2008'
set @M_Date ='8'
SET @d_Date='05'
set @mydate = CAST(CAST(@M_Date + '-'+ @d_Date + '-' + @Y_Date AS nvarchar) AS DATETIME)
select @mydate
2008-05-08 00:00:00.000
and it look ok
but whan i do this
Code SnippetEXECUTE [dbo].[testpro] @mydate
the date not pass properly !!
Code Snippet
DECLARE
DECLARE @mydate [datetime]
set @mydate = getdate()
2008-05-08 01:20:35.870
like this it work ok
what is the problem with tis line ?
set @mydate = CAST(CAST(@M_Date + '-'+ @d_Date + '-' + @Y_Date AS nvarchar) AS
tnx
Hi all
I have a procedure where I am inserting some elements into #Table and then finally get the datset I need.
Now when I am using this procedure as dataset to my report, it throws up the following error:
Invalid object Name "#TEMP2".
The data that I retrieve is similar to the data that I get from this query in the post by Manivannan.D.Sekaran
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1871478&SiteID=1
Is it because my columns are generated on the fly that I am not able to retrieve the column headers appropriately. If so can someone suggest a way over to this?
I am not sure should I posting it here or in T-SQL Forum.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
In the below procedure definition, i need to find a way parse the definition and get the list of places where the where clause is being used.
SELECT DISTINCT
FC.CASE_ID,
UPPER(FC.CASE_NUMBER) AS CASE_NUMBER,
UPPER(REPLACE(FC.CASE_SHORT_TITLE,CHAR(13)+CHAR(10),'')) AS CASE_SHORT_TITLE,
FC.CASE_STATUS_DESCR,
FC.CASE_TYP_DESC, FC.CASE_SUB_TYP_DESC,
[Code] ....
In the above query there are more than one places and the where clause may not have the same string the where clause it can be with a space between the "=" and the value in single quotes.
Result set should be in the below format:
TABLE NAME Column Name VALUE
CFG_ELEMENTS ELEMENT_NAME REPORT_CONSOLIDATEDCASES_CASERELATEDTYPID
Hello,
I was wondering if anyone can explain the positives and negatives of using a single stored procedure that contains one or more distinct queries. I know there are problems with dynamic SQL but I am not proficient enough to know whether this falls under that umbrella.
For clarification, what I am referring to is this: In a single stored procedure, I have a parameter called Query_ID that is used to identify which query in the sproc that I want to execute. Then from my ASP page, I simply pass the appropriate value for Query_ID. So:
IF @QUERY_ID = 1
BEGIN
SELECT [whatever]
FROM [tbl1]
WHERE [conditions]
GROUP BY [something]
ORDER BY [somethingelse]
END
ELSE
IF @QUERY_ID = 2
BEGIN
SELECT [whatever]
FROM [tbl2]
WHERE [conditions]
GROUP BY [something]
ORDER BY [somethingelse]
END
END
I hope that makes sense. Thanks in advance.