Hi all,
Just a quick question, I've got an execute SQL task in the control flow and just want to know if anyone knows how to make it time out like you can do with OLEDB commands in the data flow. if it's sitting there waiting for something I want it to fail after x seconds.
thoughts?
Andrew.
I am working with an odd FTP site that is using a custom pointer file (denoted by a .LMP) extension to provide pointers to dynamic data. To understand the gist, the FTP site will have a list such as:
FileName Size
SomeFile.gz.lmp 0 bytes
In order to obtain the actual file, they want me to run the following command (in BINARY mode only):
GET SomeFile.gz
If I run this command from an command prompt, the file downloads after a few seconds with a size around 3 or 4 MB.
So I need to connect to an FTP site inside of an SSIS project, grab all of the files, strip off the .LMP extension and then perform a GET on each file (RETR does not work). The nI have to gunzip each file prior to finally accessing the connects therein.
Is there any way of accomplishing this task within SSIS or do I have to create some separate shell application?
Thank you!
Hi all,
After applying the SP2 for Korean - we are getting the following error in the above task.
Transfer Fact Data From StagingDB to Presentation DB: Insert Update MetricFact [1021]: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "'OPTIMIZE' ??? ??? ???????.".
Not sure what the problem is. The same task was running properly before applying the SP2.
For other language SP2 (on other languages) the same task runs correctly and without any error.
hi,
I am having trouble executing a DB2 stored procedure using OLE DB command task.
The stored procedure takes 2 paramters.
1. filename 2. logfilename
filename - servernamefoldername extfilename
logfilename - servernamefoldernamelogfilename
Both are user defined variables with data type string. i created 2 dervied columns FILE and LOG to pass these values.
FILE takes the filename value
LOG takes the logfilename value
When I execute it gives me the following errors.
[OLE DB Command 1 [77]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBM OLE DB Provider for DB2" Hresult: 0x80004005 Description: "[DB2/NT] SQL0811N The result of a scalar fullselect, SELECT INTO statement, or VALUES INTO statement is more than one row. SQLSTATE=21000 ".
[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Command 1" (77) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
Can anyone please help me resolve this issue.
I can execute the SP using execute sql task but the problem is I need to pass the rejected rows to a reject table for logging purposes. thts why am tryin the OLE DB command.
Thank You
Hello, the following code works perfectly in SQL Server 2000 and SQL Server 2005 Express over WinXP but when run against an instance of SL Server2005 Express over Win2003Server, the first time Command.Execute is invoked returns no error (even though no action seems to be take by the server), subsequent calls return the error -2147217900 couldn't find prepared instruction with identifer -1 (message may vary, it is a translation from may locale)
Any ideas?
Thanks
Code Block
Public Sub Insert_Alarm(sIP As String, nAlarm As Long)
Static cmdInsert As ADODB.Command
Static Initialized As Boolean
On Error GoTo ErrorHndl
If Not Initialized Then
Set cmdInsert = New ADODB.Command
Set cmdInsert.ActiveConnection = db
cmdInsert.Parameters.Append cmdInsert.CreateParameter("IP", adVarChar, adParamInput, Len(sIP), sIP)
cmdInsert.Parameters.Append cmdInsert.CreateParameter("Alarm", adInteger, adParamInput, , nAlarm)
cmdInsert.CommandText = "insert into ALARMS(date_time,ip,alarm,status) values (getdate(),?,?,1)"
cmdInsert.CommandType = adCmdText
cmdInsert.Prepared = True
Initialized = True
End If
cmdInsert.Parameters(0).value = sIP
cmdInsert.Parameters(1).value = nAlarm
cmdInsert.Execute
Exit Sub
ErrorHndl:
...
End Sub
The first gives null (on sql 2014); the second works. why?
select format(cast('07:35' as time(0)), N'hh:mm')
select format(cast('07:35' as datetime2(0)), N'hh:mm')
So every time i run a DBCC command like DBCC SHOW_STATISTICS and DBCC INDEXFRAG, the query executes and goes on for ever. When i do a sp_who2 i notice that my DBCC SPID goes to sleep mode with high CPUTime and High DiskIO's. i also noticed that my server has no activity, no inserts, no updates and no select statements running by other users. Why cant i run a DBCC command?
You thoughts and suggestions are highly appreciated!
Thanks in advance
Lana
THE LADDERS (The Most $100k+ Jobs.)
www.TheLadders.com
I need to start a job task from the command line. Does anyone know of the correct command(s) to do this?
I also need to check to see if a specific job task is currently executing from the command line. Does anyone know of the correct command(s) to do this?
Thanks for any assistance.
Jim
Hi, I need to send a table data into flat and then ftp into different location.
I was using xp_cmdshell via sql task but my network engineer is saying that this xp_cmdshell will break the security and recomond to use "Execute Process Task". If i'm using this task getting the below error.
Could you advice me regrding network engineer thought and any solution for avoiding this error.
---------------------------
Execute Process Task: C:WINDOWSsystem32ftp.exe
---------------------------
CreateProcessTask 'DTSTask_DTSCreateProcessTask_1': Process returned code 2, which does not match the specified SuccessReturnCode of 0.
---------------------------
Thanks,
The SQL query takes about 4 minutes to execute in SQL Management Studio. But when I run it from the Script Task using the OleDBCommand, I got the timeout error in 40 seconds. The timeout setting on the SSIS DB connection is 0. I do not see how to set the timeout for an SSIS task. Any thoughts on this problem? TIA.
Hi All,
In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards.
I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted.
The SP looks like this
Code Snippet
CREATE PROCEDURE USP_SVInsS093Data_V001
@DetailRECTYPE nvarchar(5),
@StoreNumber int,
@Product nvarchar(20),
@Planogramref nvarchar(20),
@DisplayGroup nvarchar(5),
@ModSequence int,
@Shelfnumber int,
@Productposition int,
@StartModnumber nvarchar(20)
AS
SET NOCOUNT ON
BEGIN
if object_id('tempdb..##S093_TempTable') is not null
drop table ##S093_TempTable
CREATE TABLE ##S093_TempTable(
[DetailRECTYPE] [nvarchar](5) NULL,
[StoreNumber] [int] NULL,
[Product] [nvarchar](20) NULL,
[Planogramref] [nvarchar](20) NULL,
[DisplayGroup] [nvarchar](5) NULL,
[ModSequence] [int] NULL,
[Shelfnumber] [int] NULL,
[Productposition] [int] NULL,
[StartModnumber] [nvarchar](20) NULL
)
INSERT INTO ##S093_TempTable
([DetailRECTYPE]
,[StoreNumber]
,[Product]
,[Planogramref]
,[DisplayGroup]
,[ModSequence]
,[Shelfnumber]
,[Productposition]
,[StartModnumber])
VALUES
( @DetailRECTYPE ,
@StoreNumber ,
@Product ,
@Planogramref ,
@DisplayGroup ,
@ModSequence,
@Shelfnumber ,
@Productposition ,
@StartModnumber
)
If i have a select query after the Data Flow task only the last row is returned.
Now how to make the ##Table keep all the rows.
Any help will appreciated.
Thanks in Advance...
Cheers
Srikanth Katte
Hi,
I'm very new to SSIS and I€™m trying to do the following in a SQL task
RESTORE DATABASE @DatabaseName FROM DISK = @Backup WITH FILE = 1, MOVE @OldMDFName TO @NewMDFPath, MOVE @OldLDFName TO @NewLDFPath, NOUNLOAD, REPLACE, STATS = 10
I'm using an OLE DB connection and I have mapped user variables to the various parameter names. Unfortunately when i test the above command it fails on must declare the scalar variable "@DatabaseName". How can i get my values to be substituted into the command?
Many thanks
Martin
i've read the transact-sql command,
i known that the select command use to retrieve many fields from many tables with one command
select * from table1,table2
yes,
but i ' ve not seen the way to add,delete or update those fields from those tables with one command...
Is it possible? why?
I don't have any idea , can u help me
I want to know the sql commands , if it's possible
thanks for reply,
mochi
After setting up the linked server connection at the standby server, Itried to xcopy a file through the sql server 2000 schedule task to thestandby server's shared directory. But it keeps giving me the errormessage with'Invalid Drive Specification'.My whole process includes1) set up linked server connection on the standby server2) set up job to xcopy file as operating system commend in sql serverfrom the production box(xcopy c:directoryfile.bak\standby_servere$directory /c)3) test, but not successful - I am already running the whole scheduletask as a Windows user with Admin authority.)What did I do wrong or did I miss something?Thanks in advance
View 6 Replies View Related
I am having a problem on updating data in DB2 target table.
I followed BJ Custard's (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1058272&SiteID=1&mode=1)(thanks amillion!) post and configured OLEDB destination to insert data. But I have to also update or delete data from the target table based on flag from source.
I tried using OLEDB command which uses the OLEDB connection created by following the steps posted in above link.
Trail 1real requirement):
When I used the SQL query:
delete from table where Col1=? and Col2=?
I am unable to map to the parameters. When I click refresh button after writing the query, I get "There is a data source column with no name. Each data source column must have a name." message. Added to before message, there are no parameters to map to.
Trail 2:
When I hard code the parameters :
delete from table1 where Col1='abc' and Col2='xyz'
no parameters will come up, so no mapping. So when I execute the mapping I get the following error:
Error: 0xC0202009 at Load .....................................................: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E00.
Lookup on above error codes show those are related more to target Db2 database.
I am sure some one might have used the OLEDB command task, not only just insert task.
Any help is really appreciated.
I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.
I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:
/CONFIGFILE "C:myconfig.dtsConfig.
In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.
@[User::PackageToRun] + " /CONFIGFILE C:\myconfig.dtsConfig ".
How does one add additional CL values during the runtime for Execute Package Task?
Thanks,
Anatole
Hi,
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:Â Â . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
I am having trouble coming up with a query to extract the min and max time for each Task.. I am using Teradata SQL. The data below shows two tasks which both have the same File and Task ID. Each task starts with a Submitted Status and ends with a Rejected Status. What I need is to get the min and max time for each one of those tasks.. Unfortuneately my data below consists of values that don't have a unique identifier that I can use to split the tasks.
FileTaskDescriptionEvent DataEvent TimeStatus
643598DV2013/06/195:42:07Submitted
643598DV2013/06/195:52:48Rejected
643598DV2013/06/275:44:29Submitted
643598DV2013/06/276:02:47Rejected
I am assigning package string variable to the StandardOuputVariable of a Process Task, and setting the TimeOut to 3, TerminateProcessAfterTimeOut to True, plus the Executable name. The program is executing about 40 seconds, and it seems not to terminate after the 3 seconds has passed.
When I execute the same package but without the StandardOuputVariable the task terminates after the 3 seconds.
Is this a bug or I shouldn't expect the task to terminate when the StandardOuputVariable is set???
Hi,
I have a batch file which is located in different server. When I try to execute in BIDS it is running fine. But when I execute as SQL agent job it is not executing.
In the execute process task under executable I have supplied the batch file path . For example \112.89.93.9abcsample.bat.
It is executing fine when I execute this in BIDS supplying the above path under executable. But when I run this as SQL agent job it keeps on running and does not end and it is doing anything.
Do I need to mention any cmd.exe file under executable and give the path under arguments tab?
Any help is appreciated.
Thanks
HI !
I need help to fix SSIS Send Mail Task Error.
I have a
Data Flow
Read from Sql Data base and then put the query result into excel file
(OLE DB Source --> Excel Destination)
Send Mail Task
Email excel file from the data flow
Control Flow :
Data Flow --> Send Mail Task
The package throws an error below. I tried to disable my antivirus because i thought it's throwing an error because of the antivirus.
But, it's still throwing the same error. If i tried to send email without attachment, it works just fine.
Is there anybody know how to fix this?
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "The operation has timed out.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
Hi,
I am using SQL Server2005 for SSIS. I want to change the source connection dynamicaly evertime.
Let me clear, I have to extract some column from excel to MS-Access. I am using Data Flow Task and able to successfully complete the job. But problem is that, whenever a new file comes , i must have to reconfigure my Excel Source.
All the time column in file are same, so no need to worry about mapping but how can my package select a file automatically.
I have a directory, suppose "C:dpak". I should able to pick the filename and sheet name from this directory every time when my package will execute.
Hi,
I'm building a custom task and just wondering what is the correct way of passing errors back to SSIS. Is there a rcommended approach to doing this. Currently I just wrap everything in a TRY...CATCH and use componentEvents to fire it back! Here's my code:
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
bool failed = false;
try
{
/*
* do stuff in here
*/
}
catch (Exception e)
{
componentEvents.FireError(-1, "", e.Message, "", 0);
failed = true;
}
if (failed)
{
return DTSExecResult.Failure;
}
else
{
return DTSExecResult.Success;
}
}
Any comments?
-Jamie
1. Use mssql server agent service to take the schedule
2. Use a .NET windows service with timers to call SqlClientConnection
above, which way would be faster and get a better performance?
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies View RelatedHi All,
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Please let me know where am going wrong?
Thanks in advance.
Do somebody know how long (in chars) script(command) can be solved by SQL Command?
Thanks