I have more CAL for the SQL Server 2000 software. I was wondering, how or where do I about to change the number per seating for the software? thanks in advance.
View 2 RepliesHi how to install SQL 2005 Standard Edition with CAL License???
-Thanks N Regards,
Kanthi.
Hello,I have two questions, first some background info:We are running SQL 2000 on a Windows 2003 server for out aircraftparts database software.There are 7 workstations (windows 2000 and XP) that run the partsdatabase.4 of those workstations run really fast, the database calls are nearinstant. but the other 3 identical workstations are incredibly slow.Taking over a minute to load what takes the other workstations lessthen 2seconds, etc...Since each workstation is identical (all XP are the same, all 2K arethe same) my first thought was that we didn't have enough SQL CALlicenses for the 7 workstations, thus the 4 licenses we had wereallowing some to run fast, but the other 3 were qued up until spacebecame free, or something like that.We purchased an additional 3 CAL licenses, but I'm not sure how toinstall them...My first question:How do you actually go about installing SQL CAL licenses?I went on the MS website, and it says to simply open up the controlpanel, go into the SQL license Manager, and turn the spinner up tothe # of licenses you have.Which I did.Is that all there is to it?I can't imagine you would simply be on your honor to put that spinnerto the correct number of licenses.Question # 2If that IS the correct way to install your licenses...It made no difference in the 3 workstations SQL speed.Yes I restarted the SQL service after upping the license amount.These workstation are the same speed on the network as the "fast"workstations in every other application and when sending files,etc...Any help greatly appreciated!Take carePosted Via Usenet.com Premium Usenet Newsgroup Services----------------------------------------------------------** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **----------------------------------------------------------http://www.usenet.com
View 2 Replies View RelatedHi all,
There is a guy in my company install a sql server himself, but he picked the per seat license rather then the per server (we got the per server license), is there a way to change it without re-install the whole sql server? or need to reinstall from start?
Thanks,
Westley
Dear All,
I have different application installed on a server all of them are interface to SQL Server databases.
I want to know if I have 5 user license to one application, 10 user license to other application, 3 user license to third application. So, I have as an example 18 application license.
My question is: What does affect the access of these application to their databases? - Number of application user license or something else.
Thanks n advance.
When I installed sql, I mistakenly made it so that only 1 connection is allowed at one time. How can I change this info. to make it so that more than 1 connection are allowed without re-install sql again? Thanks
View 1 Replies View RelatedHi,
How I can change a license mode?
I choose PER SERVER, but I need PER SEAT.
Thank you at advance.
Mira.
I need to change the SQL server license mode on an installed SQL server2000 cluster from processor license to per seat.Does anyonw know?
View 1 Replies View RelatedThe wrong Cd set was used to install Sql Server 2005 enterprise edition.
I need to ensure the license for Sql server is the license from the other CD.
is there a way to switch the license without un-installing SQL Server?
I'm trying to find the SQL Server License Number used to install the software on the server. Does the installation program stores the information on the Registry or not? Looking through registry I found the ProductCode but I'm not sure if that is the valid License Number ... It does looks more like the unistall code ...
Thanks for your help
wamregua
I can't find the answer...it just talk about the CPU / ram /database limit. thanks for you help!
View 1 Replies View Relatedin my sql, i want to change a decimal number to percent format number, just so it is convenient for users. for example there is a decimal number 0.98, i want to change it to 98%, how can i complete it?
thks
I have a VERY Legitmate use to install sql 4 workgroups on a pc without licensing it. I am making a disk image for MANY pcs to be imaged and load licensing after the imaging is completed.
I have been able to do this with Windows XP Professional, MS Office 2003 and a couple non-Ms programs. The information for MS software even came from their KB, so I know what I am doing is legit. I just can't find any information on doing this for my sql app.
Any suggestions??
Respectfully,
Frustrated
"Frustrated"
I just installed MS SQL SERVER2000, but seems the password I was setting didn't look good. So I want to change it, but how? Thanks!
View 2 Replies View Relatedhi,
if I change the sort order after I install sql server, I have to rebuild the databases. the meaning of rebuilding the Databases is to create a complete database from scrach including tables, store procedures data. or what is the meaning of rebuilding the databases
Ahmed
Hi There
I installed Sql Server 2005 and SSIS to the C: drive of a server.
However i am going to install 3 more instances on this server and i want to install SSIS on the RAID drive.
So i uninstalled SSIS, then i installed another Sql Server instance on the D drive.
Now when i try to install SSIS, when i go to advanced and browse for installation path it is greyed out and it says that the path has already been bound to the 90DTS folder of the first instance i installed on the C: drive, so basically i dont know how i can install SSIS to another drive ???
Please help.
Thanx
HiWhen we installed SqlServer2000 we left the default collation name(Sql_Latin1_General_CPI_CI_AS).The user defined databases we created afterwards were defined with adifferent collation name in order to be able to accept the character setwe use, Hebrew.We are looking into switching DTSs that we use to copy data from ourmain system , that uses an Ingres database, into OSQL scripts. Althoughthe DTSs successfully copy the Hebrew letters when I copy data with OSQLit comes over as jibberish.After looking into the matter I came to the conclusion that while DTSrefers to specific databases and uses the destination database'scollation name , OSQL refers to the remote server and destination serverand therefore uses the collation name of the server and not of thedatabase. In order for it to successfully copy the Hebrew I need tochange the default collation name of the installation.Is "rebuild master" the way to do such a thing ? (this is a productionserver so we are wary of doing a "rebuild master")Has anyone else run into similar problems when transfering data betweenservers using OSQL ?ThanksDavid Greenberg
View 3 Replies View RelatedHello,
My WinCE device loads the Windows folder from NAND falsh on start-up and therefore I cannot install SQL into WindowsProgram files.
I would like to deploy SQLCE apps and dlls (from VS2005 or CAB file) into my NAND_Flash directory but I don't know how to do it.
Thx,
Uri
I know there is a sortid in .iss file, which could be used to change installation params, but I want to know how to change it after installation. Thanx.
View 1 Replies View Related
hi need help
i have table employee
i need to change to the employee Once a month the number from 1 to 2 (once a month)
in the first day of the month evry month
and loop back to 1 . 2 .3 .4
evry month next number from 1 to 4
empid val_Number date
-----------------------------------------------------------
11111 1 17/01/2008
2222 4 19/12/2007
3333 3 19/12/2007
i need to see it like next month (in the first day of next the month)
empid val_Number date new_val
--------------------------------------------------------------------------------
11111 1 17/01/2008 2
2222 4 19/12/2007 1
3333 3 19/12/2007 4
TNX
Hi there,
I want to change the default sql-server port number 1433 to a new one. Can i do that? If yes, how?
Also, i have noticed that there is no port number option in the sql server 2005 management studio login window. So, what if the server has changed its port number?
Any suggestions would be appreciated. thanks
Hello ,
How can i define a different TCP/IP port number , other than the default 1433; to replicate the database over a firewall on the source and the destination servers ? My source servers are SQL SERVER 7.0 with SP3 on Windows NT Server 4.0 and the destination servers are SQL 2000 with SP2 on Windows 2000 .
Where do i have to make changes in SQL server and Windows NT ? And further how secured it is to use this way for security ?
Can i get some on this matter please .
Thanks in advance
Sandra .
Does anyone know how to change the number of conccurent connections on SQL Server 7. We have purchased 10 additional licenses and I need to change the concurrent users from 10 to 20. Any help would be appreciated. Thanks
Phil
hai all,
I need to change the default port number of the SQL server from 1433 to some other port number. i know that it can be done thru SERVER NETWORK UTILITY. Can some one confirm that. It will be helpful.
Also i want to make sure that port to given is free port. how can i find that particular port is free.
Thanking in Advance, awaiting Quick response.
Signing Off
Venkatesh.V
Hi,
I'm new in all this, I have sql server 2005 and have a problem I need let access to more users to the database, in the properties page of my DB I hava a Number of user field with 5, how can change this to up number?
I hope can help me.
Good morning !Anyone knows how can i change a SQL Server Serial number without uninstallit ?Thanks in advancedJLuis
View 1 Replies View RelatedI have a query which runs exactly as I want it to. Let's say it returns this in a table:
IDNumber
123
212
312
I want to change (find and replace?) all the number 12s in the 'Number' column for a string. I want to change the 12s to the word: HelloWorld. I don't want to update the table, merely the table that is being returned in the query.
I have a requirement to calculate the % change in the number of orders received today with the number of orders that were received 3 days back. All data is in the same table. There is a received date column.
I have two count(*) queries - one for today and one for 3 days back running separately and getting the results. Is it possible I can get the % change in orders received from 3 days back and today in one query.Also if I want to get the number of orders received today between 12:00am today and current time. How would I modify the query.
I am fairly new to reporting services and recently created a simple tabular report. There is one table which queries the database and I would like to change the table so there are more than 25 rows of data per page. How do I do this? Also it would be advantageous to know how to set the report to only create a new page for every different item in a column. E.g., if I have various data for each date, I would like to only create a new page when the date changes so that all data for a specific date is on one page etc etc.
View 13 Replies View RelatedI'm trying to quantify the number of times folks use SQL Server Management Studio to change client data in one of our production databases. Does SQL Server keep this statistic? How do I get to this data?
View 6 Replies View RelatedHi,
I am trying to install "Microsoft SQL Server 2005 Express Edition" through VS2005 Setup but it is always failing to install. I am presenting here log file information.I appriciate if any one help me on this..I have marked all failed message with red color
--------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Wed Dec 20 15:04:57 2006
Machine : DATLA
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : SQL Server Database Services
Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
)
--------------------------------------------------------------------------------
Machine : DATLA
Product : SQL Server Database Services
Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
)
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log
Last Action : InstallFinalize
Error String : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
Error Number : 29530
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server 2005 Tools Express Edition
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Wed Dec 20 15:19:47 2006
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SCC.log
---------------------------------------------------------------------------------------------------------------
Thanks in Advance.
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies View Related