We want to back up our test db (new application) and then put it back on the box. The transaction log is pretty full (600mb), can I clear this file or delete the data in it -- we do not need it since this is all testing data.
Thanks,
anke
I'm trying to clear a database transaction log that has gotten much too large. I backed it up hoping that this would clear the "active" log, but now I just have two copies of a huge transaction log. How do I clear the active log?
Thanks in advance.
Hi
How to clear the Transaction Log of Tempdb?(Other than Restarting the SQL server)
Thanks in Advance
Regards
Magesh
Looking at the recovery model on MSDN - was under the belief from it that if you set your database to use the simple recovery model, then when you preform a full back up it would truncate the transaction log file but this doesn't seem to be the case?We aren't looking to do a point in time recovery for this particular databse.
View 7 Replies View RelatedHi i would like to know how to empty the transaction log programmaticly.
Someone got a clue? :)
Hi, I have a SQL Server 6.50 - 6.50.415 (Intel X86) and one database has 8Gb of data and 2Gb of log, the problem is that
the log space used is never below 44%, even if I back it up this way:
DUMP TRANSACTION DBName TO DBNAME_log_930 VOLUME = 'SS0003' WITH NOUNLOAD , STATS = 10, INIT , NOSKIP
This should clean the log, right?
I check for open transactions via: dbcc opentran (GMS), but there aren't.
The way I check for the log space used is: dbcc sqlperf(logspace)
The recover interval is 5.
Any Ideas?
Thank You
Gaspar Gonzalez
good day to everybody
View 5 Replies View RelatedHi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
hi thank you for this solution Hugo (dutch?) and it's very handy, thankyou but my issue is that we created dozens of views with my function.This functions returns an integer of a date. This function has to give alowerlimit and higherlimit back when dates are out of Calendar range.But i want to read this from the Calendartable ONCE and store it in aglobal variable somewhere in SQL Server. I DON'T want to referencetables in my function. SO read once the lower- and upperlimit and usethis variable/property for referencing in my function!!GreetzHennie*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 11 Replies View RelatedIs there a way to clear all the records in a table in Microsoft SQL
Server Management Studio instead of selecting all the rows and delete?
Hi....Does anyone know if there is a similar command to SQL2K's DBCC ERRORLOG.
I'm currently writing a preventative maintenance script and want to force archiving of errorlogs. Any help greatly appreciated.
It's been some time since I've written any SQL so I apologize if the answer to my question is obvious.
In pseudo-code here's what I want to do:
delete from table-1 all rows where the table-1.id = table-2.id and table-1.text = ""
Thanks in advance.
How do u clear Cache in SQL
if i run a query once it takes 10 seconds and if i run the same query again it takes 1 second because it is cached. So i want to know how i can clear it because i want do some benchmarking on a query that is in cache
does anyone know how to clear the sql "connect to server" popup server name list
View 13 Replies View RelatedHello guys!
I would like to clear the logfile. Could anybody tell me how to do this?
What I would like most would be to run SQL-Server without any log-file (while development). But I suppose that this is not possible.
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
Hi, my database i am working on is full of crab, who do I clear all the tables info?
View 3 Replies View Relatedwhat is the command using to clear the content of log file
View 2 Replies View Relatedselect *From titles(18 row(s) affected)Totally 18 records are there in Titles table.When I queryselect title,title_id From titles where title like 'T%' and title_idlike 'M%'It is returning 2 records.So,now if I introduce a not in 2 places also it should return 16records.Whereas it is returning 14 records. What is the bestway to understandthis.select title,title_id From titles where title not like 'T%' andtitle_id not like 'M%'ThanksGanesh
View 2 Replies View RelatedI have a dataBase named pricesDB. I would like to clear all the prices column everyday at midnight.
How should i do that???
When I backup a my transaction log and then run DBCC SQLPERF(logspace) the log shows 12% space used. The backup was run at night long after any transactions had been executed so there should be no active transactions. In SQL 6.5 you could run DBCC CHECKTABLE(syslogs) to clear up the usage inaccuracy is there a similar command in 7.0 to fix the space usage inaccuracy?
--Buddy
I practiced log shipping in my home PC. It works fine. But there are 3 error dialog box populated for every 15 minutes. I enclosed screen shot.
1. DW20.Exe Application Error
2. Visual Studio just-in-Time Debugger
3. Sqllogship.exe Application Error
I got this error every 15 minutes. I delete everything such as maintenance plan jobs, replication, log shipping, mirroring in my SSMS. I can't find out the solution for this error. I didn't know, how to resolve this problem.
Please advice. :eek:
Thanks
Jayasri
Hi is there a way of clearing the server names from the management studio?
i found the below on the net but i do not have this file to delete?
“All you have to do is delete C:Documents and Settings<user>Application DataMicrosoftMicrosoft SQL
Server90ToolsShellmru.dat.�
What is the best way to empty out a table to reset its identity field back to 1?
I was going to do "Generate SQL Script" for all the tables I wanted to reset and then drop and re-create each table. Is there a better way to empty out all of your tables?
hi
I would like to clear all data in a table called ... How do I do that - and before I do it I'd like the data copied to a another table as a backup .... Please guide me .....
Thanks in advance .....
Hi,
I had deleted the login and user in my SQL 2005 database. However, each time when i connect to my database using the SQL enterprise manager, I can still see the deleted username under the login. It seems that the username is stored or cache somewhere after the first time that I have login. Does anyone know how to clear it? I am using SQL 2005 authenication method on 2003 Server machine. Thanks.
Regards,
Environment1)We are using VBA,MS Access 2000/2003 and SQL Server 2000 in ourproject.2)We need to use Rational clear case as the SCM tool.Our WorkOur work primarily falls in developing SQL Server stored procedures,functions and few VisualBasicForAccess(VBA) code.Technical Help sought1) Does SQL Server 2000 provide any inbuilt capabilities of SoftwareConfiguration Management(SCM)?Not that I am aware of other thanextending it with other DM management tools like BMC,A&G,VERITAS etc.2)If not, Is there any plug-in available in SQL Server environment thatcan be installed on SQL Server so that any code developed [Storedprocedures/functions etc] can be managed in Clearcase.[I am looking forEclipse plugin's kind of plugins which would enable you to check in andcheck out from Eclipse after the initial configuration is done onEclipse]?3)If plugins are not available then the option we have is, manual andexternal check in and check out the code bits in to Clearcase.Can someone point me to concise and relevant user manual on this.
View 2 Replies View RelatedIs there a simple method to clear all the tables in a db or to make a copy of the mdf file without the datas ?
I tried to use TRUNCATE TABLE but it doesn't work with foreign keys ?
Thanks.
I'm writing a web application that saves data to a Microsoft SQL database. As I build my application, I continually dirty my database with test data and refine my data schema. Is there a tool that can quickly remove all of the data from 4 of my 5 tables? Right now I'm using MS SQL Server Management Studio Express to open each table and manually deleting the rows of data and it's a pain in the ass. Playing around with the Management Express, I was able to generate a create SQL script (I'm afraid to test it though) that looks like it will rebuild my table. The problem is, one of my tables is a list (index?) of types...and I'd need that data saved
ebuilt each time...but I cannot figure out how to tell SQL that the rows in this table needs to be rebuilt (and is not really data per say).How do you guys "clear" or reset your database during development?-=STZ=-
I have an application that allows users to "reserve" a certain time and location for practice sessions. I want them to look at a web form that shows which times are available and then allows them to select an open slot and then submit this form with some personal information. My problem is that as soon as they select an open slot, other users should see that this slot is no longer available. On the other hand, if someone selects an open slot and then takes too long to type in their personal information, I want it somehow to kick them out and re-open this slot back up.
I know that I can create a field called 'status' in my database that gets turn to something like 'pending' as soon as the first user clicks on an open slot, but how would I turn this field back to the 'open' state if the user took too long to enter their data?
Any help would be surely appreciated.
Cheers,
AzF