Hello all.
I have a fairly simple question (I think) about using the @Declare in a select statement.
Essentially what I am trying to do is this
DECLARE @SELECT varchar(max)
SET @SELECT = '*'
SELECT * FROM test
I know this doesn't actually work but it conveys what I am trying to do.
Is there a way to do this?
Hello all,
I am frustrated! I have tried to get this script to run 8 ways from Sunday and I am not having any luck. Below are the two iterations I have attempted. In both cases the error:
Must declare the scalar variable "@BAK_PATH" appears. The key to this is that I need to run the backup on the DB directly because the Database must be backed up by name for the next step to work.
DECLARE
@PAR1 VARCHAR (256),
@BAK_PATH VARCHAR(256);
DECLARE DB_PAR CURSOR FOR SELECT NAME FROM SYS.DATABASES WHERE NAME LIKE '%HRN%TEST';
BEGIN
OPEN DB_PAR
FETCH DB_PAR INTO @PAR1;
PRINT @PAR1
EXECUTE ('
USE [' + @PAR1 +'];
DECLARE HRN_SHR CURSOR FOR SELECT (SELECT UPPER(keyword_value) FROM apidbsys WHERE keyword = ''defaultdirectory'') + ''TEMPHRN_LIVE_TO_TEST.BAK'';
OPEN HRN_SHR
FETCH HRN_SHR INTO @BAK_PATH;
BEGIN
execute(''BACKUP DATABASE [@PAR1] TO DISK = ''' + @BAK_PATH + ''' WITH NOFORMAT, NOINIT, NAME = N''''SCRIPTED-Full Database Backup'''', SKIP, NOREWIND, NOUNLOAD, STATS = 10
'')
END
PRINT ''DATABASE BACKUP OPERATION COMPLETED.''
CLOSE HRN_SHR;
DEALLOCATE HRN_SHR;
')END;
CLOSE DB_PAR;
DEALLOCATE DB_PAR;
Option 2:
DECLARE
@PAR1 VARCHAR (256);
DECLARE DB_PAR CURSOR FOR SELECT NAME FROM SYS.DATABASES WHERE NAME LIKE '%HRN%TEST';
BEGIN
OPEN DB_PAR
FETCH DB_PAR INTO @PAR1;
PRINT @PAR1
EXECUTE ('
USE [' + @PAR1 +'];
DECLARE @BAK_PATH VARCHAR(256);
DECLARE HRN_SHR CURSOR FOR SELECT (SELECT UPPER(keyword_value) FROM apidbsys WHERE keyword = ''defaultdirectory'') + ''TEMPHRN_LIVE_TO_TEST.BAK'';
OPEN HRN_SHR
FETCH HRN_SHR INTO @BAK_PATH;
BEGIN
execute(''BACKUP DATABASE [@PAR1] TO DISK = ''' + @BAK_PATH + ''' WITH NOFORMAT, NOINIT, NAME = N''''SCRIPTED-Full Database Backup'''', SKIP, NOREWIND, NOUNLOAD, STATS = 10
'')
END
PRINT ''DATABASE BACKUP OPERATION COMPLETED.''
CLOSE HRN_SHR;
DEALLOCATE HRN_SHR;
')
END;
CLOSE DB_PAR;
DEALLOCATE DB_PAR;
I must be missing something really simple. HELP!
I've just installed a 365-day trail of microsoft SQL Server 5.0 Development edition and want to connect to a database in the database engine. I've checked that the services are running under My Computer->Manage->Services and Applications->SQL Server Configuration Manager and the SQL Server, SQL Server Agent msftesql and SQL Browser services are all running.
When I try to connect to my database, I get the following error:
InternalsVisibleTo declarations cannot have a version, culture, public key token, or processor architecture specified. (ObjectExplorer)
The start of this message is prefixed with:
C:WINDOWSassemblyGAC_MSILMicrosoft.SqlServer.SmoEnum9.0.242.0_89845dcd8080cc91Microsoft.SqlServer.SmoEnum.dll
What on earth does all that mean? And how to I fix it so I can connect?
Cheers,
- Blue.
So I was looking at the code for the proc created by Ola's script and noticed a number of variable declarations happening early on (like at line 10) but these variable declarations do not have the DECLARE keyword prefacing the variable identifier.
Then, a couple lines lower, a new batch of variables are declared, but this time with the DECLARE keyword. I was under the impression that you always needed the DECLARE. Is it a scope thing? Like related to the fact the first set of variables are before the stored proc's begin statement?
USE [master]
GO
/****** Object: StoredProcedure [dbo].[DatabaseBackup] Script Date: 7/20/2015 2:23:36 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[DatabaseBackup]
[Code] ....
Hello, how can i merge together several select statements?
I have something like this:
CREATE PROCEDURE Forum_GetThreads @ID int,@AscDesc bitASBEGINSET NOCOUNT ON;SELECT * FROM forum_ansageSELECT * FROM forum_topics WHERE (status = 0) ORDER BY (created) DESCIF (@AscDesc = 0)BEGIN SELECT * FROM forum_topics WHERE (status > 0) ORDER BY (created) DESCENDELSEBEGIN SELECT * FROM forum_topics WHERE (status > 0) ORDER BY (created) ASCENDHere i want to merge them all together and return only one SELECT statement with all the data
Both of these work fine separately; How do I join these two Select Statements?
SELECT MPI.CREATE_DT,MPI.MPI_NBR, MPI.LAST_NM,MPI.FIRST_NM,
MPI_CURRENT_ADDR.ADDR_NBR, MPI_CURRENT_ADDR.ADDRESS_1, MPI_CURRENT_ADDR.ADDRESS_2,
MPI_CURRENT_ADDR.CITY,MPI_CURRENT_ADDR.STATE_CD,MPI_CURRENT_ADDR.ZIP_CD,MPI_CURRENT_ADDR.PHN_NBR,
MPI_PERSON.BIRTHDAY,MPI_PERSON.SEX
FROM MPI,MPI_CURRENT_ADDR,MPI_PERSON
WHERE (MPI.MPI_NBR=MPI_PERSON.MPI_NBR) AND (MPI.ADDR_NBR=MPI_CURRENT_ADDR.ADDR_NBR)
AND
MPI.CREATE_DT>=20070101
ORDER BY MPI.CREATE_DT
SELECT PATIENT.PAT_NBR,PATIENT.PHYS_NBR, PHYSICIAN.FIRST_NM,PHYSICIAN.LAST_NM,PHYSICIAN.DE_NBR, PHYSICIAN.SALUTATION_CD
FROM PATIENT, PHYSICIAN
WHERE PATIENT.PHYS_NBR=PHYSICIAN.PHYS_NBR
Thanks!
Lisa
I have a table that list Canadian provinces and American States it looks something like this:
ID | ProvState
Under ID 1-13 lists the Canadian provinces and everything over 13 lists the American states. I want to create 1 query that will list the Canadian provinces first in alphabetical order then the States in alphabetical order.
I have tried using UNION but it's not returning what I want and it does not allow me to use order by for the first statement.
SELECT * FROM SPProvince WHERE ID < 14 ORDER BY ProvState
UNION
SELECT * FROM SPProvince WHERE ID > 13 ORDER BY ProvState
Anyone have any suggestions to this problem?
Arnie and All others. Thanks for your help.
The previous case became lenghty and then just mixed up a lot.
To make it easy I have created two temp tables and wrote to test select statement .
You will notice that I tired two select statement but they are giving different set of result however the 2nd Select statement not giving the result as should be looking at the following requirement.
--Selected record must RaType='b'
-- PlanID='H321'
-- Gender='0'
--
--And not to include in select if any one of these meets:
-- Hosp='1' in other words it has to be 0
-- ESRD='1' or Rafctor Type in ('g','f') in other words ESRD should be 0 and rafctorType in ('h','i')
-- Dod is not null in other words Dod has to be null
--
--copy from here
GO
Create table #MyTable
( RowID int IDENTITY,
RD varchar(10),
RAType varchar(5),
History varchar(15)
)
INSERT INTO #MyTable VALUES ( '1', 'A', '1111' )
INSERT INTO #MyTable VALUES ( '2', 'S','2222' )
INSERT INTO #MyTable VALUES ( '3', 'D', '2345')
INSERT INTO #MyTable VALUES ( '4', 'I2','1234' )
INSERT INTO #MyTable VALUES ( '5', 'C','3333' )
INSERT INTO #MyTable VALUES ( '1', 'B','4444' )
INSERT INTO #MyTable VALUES ( '2', 'X','5555' )
INSERT INTO #MyTable VALUES ( '1', 'D' ,'66666')
GO
Go
Create Table #MYTable2
(
RowID int IDentity,
RD varchar(10),
RaType varchar(5),
History varchar(15),
PlanID varchar(6),
Hosp varchar(2),
ESRD varchar(2),
RafctorType varchar(3),
gender varchar(5),
dod varchar (5) NULL
)
INSERT INTO #MyTable2 VALUES ( '1', 'A', '1111', 'H321', '0','0', 'g', '0' ,NULL)
INSERT INTO #MyTable2 VALUES ( '2', 'b', '2222', 'H321', '0','0', 'e', '0',NULL )
INSERT INTO #MyTable2 VALUES ( '2', 'b', '3333', 'H321', '0','0', 'f', '0',NULL )
INSERT INTO #MyTable2 VALUES ( '2', 'b', '4444', 'H321', '0', '0','d', '0',NULL )
Go
Select #MYtable2.History from #MYTable2
INNER JOIN #mytable on #myTable2.History=#mytable.history
Where #MyTable2.RaType='b' And PlanID='H321' And Gender='0' And Hosp<>'1' And ESRD<>'1' AND RafctorType Not in ('g','f') AND Dod is NULL
Select #Mytable2.History from #MyTable2
INNER JOIN #mytable on #mytable2.History=#mytable.history
where #mytable2.Ratype='b' AND PlanID='H321' AND Gender='0' AND(Hosp<>'1') or ((ESRD<>'1') or (RafctorType Not in ('g','f')) OR DOD is NULL)
Go
drop table #Mytable2
Drop table #MYtable
Hi Everyone,
Can you please let me know what is wrong with the following code? I run the following code using path: http://localhost/jimmy/may_30th_2006/vcalendar_cs/sb_PAYMENTS_page.aspx?LoginID=admin
public void searchResultsWithClinic() { SqlConnection myConnection; string conString; conString = ConfigurationManager.AppSettings["calendarString"]; myConnection = new SqlConnection(conString);
String cmdStr1, cmdStr2, cmdStr3; cmdStr1 = "SELECT sb_clinic_name FROM sb_client_and_clinic WHERE sb_client_id = '" + Request.Params.Get("LoginID") + "'";
cmdStr2 = "SELECT sb_client_id FROM sb_client_and_clinic WHERE sb_clinic_name = '" + cmdStr1 + "'"; SqlDataAdapter myCommand = new SqlDataAdapter(cmdStr2, myConnection); DataSet DS = new DataSet(); myCommand.Fill(DS, "SearchPaymentResults");
repeaterSearchPaymentResults.DataSource = DS; repeaterSearchPaymentResults.DataBind(); myConnection.Close();
}
Incorrect syntax near 'admin'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'admin'.Source Error:
Line 90: SqlDataAdapter myCommand = new SqlDataAdapter(cmdStr2, myConnection);
Line 91: DataSet DS = new DataSet();
Line 92: myCommand.Fill(DS, "SearchPaymentResults");
Line 93:
Line 94: repeaterSearchPaymentResults.DataSource = DS;Source File: d:Inetpubwwwrootjimmymay_30th_2006vcalendar_cssb_SearchPaymentResults.ascx.cs Line: 92 ---------------------------------------------------------------------------------
Please note that the 'admin' in the error message comes from http://localhost/jimmy/may_30th_2006/vcalendar_cs/sb_PAYMENTS_page.aspx?LoginID=admin
thanks,May
I have a SP returning the following result The select statement for this is
Code:
SELECT dbo.TEST1.[OFFICE NAME], COUNT(dbo.TEST1.[ACCOUNT ID]) AS AccountCount
FROM dbo.Test2 INNER JOIN
dbo.test3 INNER JOIN
dbo.Test4 ON dbo.test3.[Accounting Code] = dbo.Test4.[Accounting Code] INNER JOIN
dbo.TEST1 ON dbo.Test4.[Office ID] = dbo.TEST1.[ACCOUNT ID] ON dbo.Test2.[Model ID] = dbo.test3.ID INNER JOIN
dbo.[Inquiry Details] ON dbo.Test2.InquiryID = dbo.[Inquiry Details].InquiryID
WHERE (dbo.Test2.InquiryDate BETWEEN CONVERT(DATETIME, @startDate, 102) AND CONVERT(DATETIME, @endDate, 102)) AND dbo.Test1.[Account ID] IN(SELECT [account id] FROM test5 WHERE [Contact ID] = @contactId)
GROUP BY dbo.TEST1.[OFFICE NAME]
ORDER BY COUNT(dbo.TEST1.[ACCOUNT ID]) DESC name id count case1 226 320 case2 219 288 case3 203 163 case4 223 90 case5 224 73 i have another select stnat which returns like this The select statement is
Code:
Select test1.[office name], count(test1.[office name]) From test1 inner join test4 on test1.[account id]=test4.[office id] inner join test3 on test4.[accounting Code]=test3.[accounting Code] Group by test1.[Office Name] order by count(test1.[office name]) DESCname count case6 10 case2 56 case4 66 case1 74 case3 88 case7 100 case5 177 How can i combine this select stament with the SP, so that, i get a fourth column with case1 226 320 74 case2 219 288 56 .......................... ........................... Hope i am not confusing you all Please help me, if someone knows how to combine this? Thanks
I only want to count the titleids that are on loan can I join these two statements or write the stored procedure a different way? I hope this makes sense.
select count(libraryrequest.titleid) as [Presently on Loan], libraryrequest.titleid, media.[description]as Media
from libraryrequestjoin titles on titles.titleid = libraryrequest.titleidjoin resources on resources.titleid = titles.titleidjoin media on media.mediaid = resources.mediaidgroup by libraryrequest.titleid , media.[description]
select distinct requestors.Requestorid, titles.title, resources.quantityowned,requestors.requestorEmail,Requestors.requestdate, fname, lname, phonenum,StreetAddress1, City, State, Zip, libraryrequest.shipdate,libraryrequest.duedate, libraryrequest.returndate
from Requestorsjoin Titles on titles.Titleid = requestors.Titleidjoin libraryRequest on LibraryRequest.requestorid = Requestors.requestoridjoin resources on resources.titleid = titles.titleid
how can take codes below and put them into one store procedure to supplie a gridview. also i will like to define the row name on the left like i did to the column on the top using the 'AS'
Code1....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE1' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE1')
Code2.....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE2' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE2')
thanks in advance
I am writing a stored procedure to select some information from two tables and I would also like to Execute a function using the userid information from the processing in the where clause of the Select statement. Is the syntax below possible?? If yes, could you please help me understand exactly what I may be doing wrong here.. If no, can you please help with better syntax. Thanks in advance
SELECT M.UserID, M.FullName, (EXEC calcPoints M.UserID) as 'UserPoints'
FROM MissionUsers M LEFT OUTER JOIN MissionUserInfo MU ON M.UserID = MU.UserID
WHERE M.EMAIL = @UserEmail
Hi,
newbie here.
Im trying to perform the following two select statements on the one table. I have been trying innerjoins etc but keep getting errors. The basis of what im trying to do is this.
SELECT column1
FROM table1
WHERE column2 = (select column2 from table1 where column3 = 14)
Any ideas greatly appreciated.
Hi guys and gals,
I am trying to create a select statement that will return an INT that I will later have to use in another select statement. I have the following code, however, I keep getting an error that says:
'Error116: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.'
My Code is below:
//Start of sql
CREATE PROCEDURE ADMIN_GetSingleUsers( @userID int) AS
DECLARE @userSQL intSET @userSQL = (SELECT User_ID, TITLE.TITLE AS TITLE, Cast(Users.Active as varchar(50)) as Active, Cast(Users.Approved as varchar(50)) as Approved, Users.Unit_ID As usersUnitID, * From TITLE, Users WHERE User_ID = @userID AND TITLE.TITLE_ID = Users.Title_ID )
Select Unit_ID, Parent_ID, Unit_Name from UNITS WHERE Unit_ID = @userSQL
//End of sql
Can you point to what I am doing wrong? Thanks in advance!
I am having problems using IF statements. In fact, I don't even know if it is possible to use "IF" in a SELECT statement. Here's my dilemma:
For each employee in my database, I have a numeric rating. I want to assign the rating to a category (green, yellow, red), based on the range the rating falls into.
My data currently looks like this:
EmpName Rating
employeeX 100
EmployeeY 85
EmployeeZ 25
After the magic of SQL, I want the data to end up looking like this (actually, my boss wants it like this):
EmpName Green Yellow Red
employeeX 100
EmployeeY 85
EmployeeZ 25
The numeric rating would be inserted into the appropriate column, based on these ranges:
95 to 100 = green
80 to 94 = yellow
< 80 = red
I thought I could use a CASE statement, but I just learned that I can't do comparisons (I'm obviously a beginner). And I can't figure out how to use an If statement (or IIF).
Can anyone help?
Thanks!
Colleen
Hi !
I have to divide and analyse a bigger table to get a smaller one. My target is to make this division in only one SQL-Statement.
My table looks like this:
Code:
ArtNo Code
16637 C
38827 A
16637 D
44883 C
44883 C
63853 H
24564 D
24564 A
(ArtNo is not the Primary Key)
My SQL-Statement should now find out how often every "code" belongs to a "ArtNo".
The result should be:
Code:
ArtNr A C D H
16637 1 1
38827 1
34343 1
44883 2
63853 1
24564 1 1
Does anyone have ANY Idea how I could realize this as easy as possible (without View etc.) ??
Regards
Gawan
I am not sure if this is possible, but I was wondering if I can combine 2 SELECT statements so as to aquire a percentage..
I could be overthinking this....I am fairly new to SQL writing.
Here is an example of the 2 SELECT statements that I am using:
Code:
SELECT COUNT([Overall Rating]) FROM S526960.HDPIMaster WHERE Location = 'HBUS' AND [Overall Rating] = 'Good'
Code:
SELECT COUNT([Overall Rating]) FROM S526960.HDPIMaster WHERE Location = 'HBUS'
Within my output I am than taking the the data from the 1st query and dividing it by the 2nd query to get a percentage.
I was hoping that I could accomplish the same action within one SQL statement.
Thank you for your consideration!
I need help nesting select statements. Here's what I'm trying to do:
select (select e.emp_name_lf as employee, e.emp_id
from employee e, install_payroll_detail ipd
where e.emp_id = ipd.emplno)
e.emp_name_lf as username
from employee e, install_payroll_master ipm
where e.emp_id = ipm.entered_by
I just want one row with both the employee and username, however I cannot get the syntax. Any help is greatly appreciated.
Thanks!
Hi All,
I want to find difference of two Select statement in SQL Server 2000. As in Oracle we have "MINUS". Do we have the same thing in SQL Server also.
Thanks with Regards.
-Mohit.
Hi ,
If any one could help me in Joining these two select statements:
How Can I have Order by and Having Clauses in my final select list ?
***********
SELECTMIN(DISTINCT x.ProductionDate) as ProductionDay,COUNT(DISTINCT v.Number) as Timelost
FROMmaster..spt_values AS v
INNER JOIN
(
SELECTDATEDIFF(MINUTE, '00:00:00', Convert(varchar(10),StartDate,108)) AS StartMinute,
DATEDIFF(MINUTE, '00:00:00', Convert(varchar(10),EndDate,108)) AS EndMinute,
Convert(varchar(10),StartDate,102) as ProductionDate
--,COUNT(AlarmMessage) As Occurances
FROM RPMS.dbo.List_PaintShopAlarms
WHERE --Convert(varchar(10),StartDate,102) = @vcProductionDay and
Convert(varchar(10),StartDate,102) = Convert(varchar(10),EndDate,102)
AND (AlarmMessage LIKE '7FM%' OR AlarmMessage LIKE 'CONV%' OR AlarmMessage LIKE 'EMG%' )
)
AS x ON x.StartMinute <= v.Number
AND x.EndMinute > v.Number
WHEREv.Type = 'p' AND Number < 1440
and (x.ProductionDate BETWEEN Convert(varchar(10),@dtProductionDayStart,102) AND Convert(varchar(10),@dtProductionDayEnd,102))
group by x.ProductionDate
order by x.ProductionDate asc
***********
and
***********
SELECT Convert(varchar(25),[StartDate],102)as ProductionDay
,COUNT(AlarmMessage) As Occurances
FROM [RPMS].[dbo].[List_PaintShopAlarms]
WHERE
([AlarmMessage] LIKE '7fm%' or [AlarmMessage] LIKE 'Conve%') AND
Convert(varchar(25),[StartDate],102) BETWEEN Convert(varchar(25),@dtStartDate,102) AND Convert(varchar(25),@dtEndDate,102)
and DATEPART(dw, [ProductionDay]) <> 1
GROUP BY Convert(varchar(25),[StartDate],102)
HAVING SUM([Duration]) < 86400
ORDER BY Convert(varchar(25),[StartDate],102) asc
*************
how can i join these 2 queries to produce 1 result
Query 1:
select R.Name, T.Branchid, t.TradingDate,t. TransactionDate,
convert(varchar,T.Tillid)+'-'+convert(varchar,t.Saleid) as DocketNumber,
t.SubTotal, t.SalesRepPercent, t.SalesRepComAmount as CommissionAmt
from TransactionHeader T
join SalesRep R on
R.SalesRepid = T.SalesRepid
where T.SalesRepid is not null
Query 2 :
select C.TradingName,C.AccountNo
From Sale S
Join ClMast c on
C.Clientid = s.CustomerAccountID
The result should be R.Name,T.Branchid, t.TradingDate,t. TransactionDate,DocketNumber,t.SubTotal, t.SalesRepPercent, t.SalesRepComAmount, TradingName,Accountno..Field Saleid is present in Transactionheader Table and Sale table
different Users are running select statements under their own login. they have readonly permission to the database. My goal is to track all those queries and send notification which tables were opened and which columns were displayed...Looks like I need trigger on select statement for the table...( Unfortunetely it doesn't exists)
I collect all those statements in trace file and in the night time I stop trace, move file data to table and then step by step try to massage sql queries using VB.net... Most of those queries are so complicated, have derived tables inside and it is really hard to parse these sql statements...
1.If anybody has an idea how to say: User B opened table tbl_A col_B twice per today...using different methodology rather then go through SQL.(Other words how to create an event on a table which will be fired in a case of request select any column of that table?)
2.If somebody know where we can take good parser which will help with this job?
Thanks
I tried this:IF Exists (Select 1 from TESTA..POP10100 where PONumber=@PONumber) and(Select 1 from TESTA..POP30300 where POPType<>2 andPOPRCTNM=@ReceiptNo)BEGINENDIt says Incorrect Syntax error? I tried to cover the whole thing withan extra parantheses. It wont work eitherWhat am i doing wrongThanks, Girish
View 2 Replies View RelatedHi
I have a question.
I have to write a stored procedure.I have a search page having four fields.Giving any of the field should fetch the whole record and display in the gridview. My trouble starts here I have a button field in gridview1 . when i click on the button there should be another gridview which displays refunds of particular customer i.e from another table.There is only one common colum in the two tables. based on that colum value we have to fetch from second table.
now my question is :
how to capture the colum value of first select statement and give it as input to second select staement.
my code is here :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[search]
(@val1 varchar(225),
@val2 varchar(50),
@val3 varchar(50),
@val4 varchar(50))
AS
BEGIN
Select*From customer where
((@val1 IS NULL) or (CNo = @val1)) AND
((@val2 IS NULL) or(LastName = @val2)) AND
((@val3 IS NULL) or(FirstName = @val3)) AND
((@val4 IS NULL) or(PhoneNumber = @val4))
Select * From refunds where CNo = @val1
END
here if i fill CNo text box in my search page its giving the value
but all the time user may not give CNo.He may search customers based firstname ,lastname etc.
so what should i do to capture CNo from first select statement and give it as input to second select statements
anyone help is appreciated.
ramya.
Hi,
I have a SP having three differnet select statements like,
IF @reporttype ='A'
SELECT Column1, column2
FROM table1
IF @reporttype = 'B'
SELECT Column3, column4
FROM table2
IF @reporttype = 'C'
SELECT column5, Column6
FROM table3
Now I need three different reports for all three reporttypes.
If i creating first report for @reporttype A, it is executing fine and giving me the Columns which i need.
But while creating reprots for reporttype B and C, I m getting columns column1 and column2 . Its not displaying Column3, Column4, Column5, Column6.
Can anybody help me with this?
I have two select statements on a single table as follows:
SELECT * FROM DOCUMENTS
WHERE FILEDATE LIKE '%1987'
SELECT DOCNUM, COUNT(*) AS TOTALS FROM DOCUMENTS
GROUP BY DOCNUM
HAVING (COUNT(*)>1)
I want to combine the them to provide a list of rows in the table that have duplicate "DocNum" but only within the subset of rows LIKE %1987. When I first looked into how this is done I was sure that you would use a subquery. I tried to combine them using the first one as the outer query and the COUNT as the subquery. However, this gave an error that the subquery was returning a value that did not match what the outer query was expecting. So my questions are: Do I really need a subquery in the first place since this is all within one table? And, if not, how can this be done?
Thanks!
DeBug
Hello everyone
I need to have a transaction with a select statement like so
trans = cn.beginTransaction
Insert into order table an order record
select unique order Id from order table
insert record 1 into orderdetails using the orderid
insert record 2 into orderdetails using the orderid
commit trans
I am of course experiencing record locking after my first insert. I cannot select records from the order table even though I need the inserted OrderId in order to insert into the orderitemst table.
I have tried switching the isolation level to readuncomitted on my transaction but sp_who2 still shows a block even with the readUncomitted Isolation level.
A foreign key on the orderitems table prevents me from inserting orderitems without a parent order id to prevent orphans. Is this a common transactional issue?
Any help is greatly appreciated.
I was wondering if it's possible to have a stored procedure that has two select statements which you can combine as a single result set. For instance:select name, age, titlefrom tableaselect name, age, titlefrom tablebCould you combine these queries into a single result set?
View 2 Replies View RelatedHello. I a SP with 2 select statements. If the first returns no results it does the second select. This works fine if I test it on the sql server. But when I try it in a webform using a sqldatasource it only returns a result if the first Select returns rows. If not It is an empty set (where I know it should not be. It returned resultrs on the SQL server). This is the code:1 ALTER PROCEDURE [SPName]
2
3 @SearchFor varchar(150) -- search string to compare with
4
5 AS
6
7 SELECT p.UserName,
8
9 (Select ImageName from ProfileImages Where IsMainImage = 1 And ProfileID = p.ProfileID) as ImageName,
10
11 (SELECT COUNT(*) FROM auditions WHERE UserID = p.ProfileID) AS AuditionCount
12
13 FROM Profiles p WHERE UserName = @SearchFor
14
15 IF (@@ROWCOUNT = 0)
16
17 Begin
18
19 SELECT p.UserName,
20
21 (Select ImageName from ProfileImages Where IsMainImage = 1 And ProfileID = p.ProfileID) as ImageName,
22
23 (SELECT COUNT(*) FROM auditions WHERE UserID = p.ProfileID) AS AuditionCount,
24
25 DIFFERENCE(p.UserName, @SearchFor) as Similarity
26
27 FROM profiles p WHERE SOUNDEX(p.UserName) = SOUNDEX( @SearchFor )
28
29 ORDER BY Similarity
30
31 END
32
33 RETURN
Now If i change the SP to test it to the code below, it does work in both the webform and on the sql server: 1 ALTER PROCEDURE [SPName]
2
3 @SearchFor varchar(150) -- search string to compare with
4
5 AS
6
7 DECLARE @RowCount int
8 SET @RowCount = 0
9
10 IF (@ROWCOUNT = 0)
11
12 Begin
13
14 SELECT p.UserName,
15
16 (Select ImageName from ProfileImages Where IsMainImage = 1 And ProfileID = p.ProfileID) as ImageName,
17
18 (SELECT COUNT(*) FROM auditions WHERE UserID = p.ProfileID) AS AuditionCount,
19
20 DIFFERENCE(p.UserName, @SearchFor) as Similarity
21
22 FROM profiles p WHERE SOUNDEX(p.UserName) = SOUNDEX( @SearchFor )
23
24 ORDER BY Similarity
25
26 END
27
28 RETURNOnce again, Everything works as it should (for both versions), if I am testing it directly on the SQL server. Can anyone Help me on this? I am stumped and cannot find any answers about this.
Hi
I am trying to include a string variable in a Select Statement.
My problem is that when I code with the user name hard coated in the SQL Statement it works fine (see below:)
cmd.CommandText = "SELECT UserPswd, StudioID, StudioCode FROM Users WHERE UserName = 'jdoe' " But when I try to use the String variable I get an error (See below):
cmd.CommandText = "SELECT UserPswd, StudioID, StudioCode FROM Users WHERE UserName = " & StrUserName
I know there must be something wrong with my syntax ??
Thanks
Jackson
Hi,
thanks for reading!
Here is my problem: I have a strored procedure that inserts some records
into one table and then selects some records from another table at the end.
The stored procedure takes several parameters, first one of them is marked as
OUTPUT. I'm using it to return an id of the inserted record. The procedure is called from asp.net code with first parameter set as ParameterDirection.InputOutput (tried with just Output as well). Now for the problem: if the the select statement at the end returns 0 records everything works and i my first parameter contains the @@IDENTITY value from the insert statement like it is supposed to.
If the select statement at the end returns 1 or more records my output parameter is not updated at all and contains the same value as before the procedure was run. All the records are inserted correctly.
if i try to return the @@identity as a plain select statement instead of through the parameter
i get System.DBNull.
I hope you can shed some light on this for me. Here is my stored procedure:
CREATE PROCEDURE cwSaveProductInquiry
@inquiryId int OUTPUT,
@libraryName nvarchar(500),
@contactName nvarchar(200),
@address nvarchar(100),
@city nvarchar(50),
@state nvarchar(3),
@zip nvarchar(10),
@phone nvarchar(50),
@email nvarchar(100),
@comment nvarchar(3000),
@productIds nvarchar(2000)
AS
INSERT INTO INQUIRY (LibraryName, ContactName, Address, City, State, Zip, Phone, Email, Comment) VALUES(@libraryName, @contactName, @address, @city, @state, @zip, @phone, @email,@comment)
--i tried including this statement at the end as well but that did not do the
--trick either
select @inquiryId=@@IDENTITY FROM INQUIRY
set nocount on
declare @separator_position int -- This is used to locate each separator character
declare @objectId varchar(200) -- this holds each array value as it is returned
if(@productIds is not null)
begin
while patindex('%,%' , @productIds) <> 0
begin
select @separator_position = patindex('%,%' , @productIds)
select @objectId= left(@productIds, @separator_position - 1)
INSERT INTO PRODUCT_INQUIRY_LOOKUP (ProductId,InquiryId) VALUES(@objectId, @inquiryId)
select @productIds = stuff(@productIds, 1, @separator_position, '')
end
end
set nocount off
Select Distinct Email from vPRODUCT_CONTACT WHERE ProductId in
(Select ProductId From Product_Inquiry_Lookup Where InquiryId=@inquiryId)
GO
I want to select 2 fields from two tables inorder to bind my Datagrid...
How can I do that using SQL statement?
Possible to do that with one statement? or i need to create stored procedure?
Can anyone show me sample codes?