How Does One Set Read-uncommitted On The Entire DB?

Mar 1, 2006

Rather than setting by session I would like to configure the DB as read
uncommitted.

Thanx Advance.

View 5 Replies


ADVERTISEMENT

Set READ UNCOMMITTED (dirty Read) At Login.

Jul 23, 2005

Is it possible to set READ UNCOMMITTED to a user connecting to an SQL2000 server instance? I understand this can be done via a front endapplication. But what I am looking to do is to assign this to aspecific user when they login to the server via any entry application.Can this be set with a trigger?

View 1 Replies View Related

Appropriate Use Of READ UNCOMMITTED?

Jul 20, 2005

I haven't used the READ UNCOMMITTED transaction isolation levelbefore, and I was wondering if this would be an appropriate use:I have an ID table containing ID numbers that are randomly generatedand need to be unique. There is a stored procedure that potentiallygenerates thousands of these IDs in one execution and inserts theminto the ID table and various other tables. The basic idea is asfollows:Begin TransactionWhile not all IDs generated {GenID:@NewID = GenerateID()If @NewID exists in ID tableGOTO GenIDInsert into ID tableInsert into various other tables}Commit TransactionThe problem occurs when the stored procedure is being run by more thanone process concurrently. The check to see whether @NewID exists inthe ID table will block, waiting for the transaction in the otherprocess to commit.Would this be an appropriate place to use the READ UNCOMMITTEDisolation level to allow different executions of the stored procedureto see what the others are writing into the ID table before thetransactions finish? I only really care that the IDs generated areunique; they're not in sequence or anything like that. Has anyone hadexperience with anything similar?

View 8 Replies View Related

READ UNCOMMITTED Data

Apr 23, 2007

1. In this topichttp://groups.google.com/group/comp...b21516252b65e7c,someone wrote: "I've implemented SET TRANSACTION ISOLATION LEVEL READUNCOMMITTED at the beginningof a number of stored procedures and, then SET TRANSACTION ISOLATIONLEVEL READCOMMITTED at the end to minimize the disruption to the application.".My question is, do you really need to set READ COMMITTED at the end ofstored procedure? What scope does that command affect?2. Could someone write some real world example where i should neverread uncommitted data... i'm having trouble understanding when ishould and when i should not use it.

View 7 Replies View Related

Perf On Read Uncommitted Isolation Level

Jul 5, 2005

Are there really any benefit on using Read Uncommitted Isolation Level or having a NOLOCK hints for retrieve queries when the default Isolation level just Read Committed (not using COM+).  I'm confused why the Community Server uses this technique perhaps for perf issues but I couldn't see any reason why...

View 1 Replies View Related

Select With (nolock) OR TransactionScope With Option Read Uncommitted Data

May 29, 2007

Hi Sql gurus :))I've got a question that I couldn't find a satisfying answer on the net.What is the difference between:1) running sql query (select from sth with nolock) with no transaction2) running sql query (select from sth) withing a TransactionScope with option Read Uncommitted dataBasically, both should do the same work. However is anyone aware of any potential problems using any of both approaches ?We use 1) to improve our web application scalability since the system works in such a way that any selects and updates on that table (sth) do not interfere with one another.However, updates are done in a TransactionScope. And when having simultaneous select with nolock and update in a Transaction scope (the select statement has a where clause and returns records that are not updated by the update statement). However sometimes ( we still cannot figure it out when) the select statement returns some records twice.For example, the select should return 1000 records , but (sometimes) it returns 1002 records ( the extra 2 records are copies of some of the original 1000 records).Removing the nolock, makes the problem does not appear - but i want to be 100% sure that nolock is our troublemaker. And if it is - why ?We also have a problem that this particular nolock select sometimes return even less records than it should.I know it sounds impossible but it happens.So anyone who has experience with select with nolock, please share :)Thanks in advance, Yani 

View 4 Replies View Related

Locks Caused By Long Lasting SELECT, Could It Be Solved By Read Uncommitted?

Jan 15, 2008

Hi,

Yesterday, we have had a sudden load in our SQL Server 2000 which resulted in several locks. There was not too much time to investigate as we had to rush. A team member had reviewed the processes in EM, Manegement, Current Activity. Looking for blocking processes and killed them.

She told me that as soon as the blocking SPID was killed, another one arose and she had to repeat the operation a dozen of time. When done, the server activity was back to normal. She noticed that more than half of the blocking processes showed that they executed the stored Proc "P_SearchProducts".

We don't own the server and the information on what had happened at that time (batches or resource intensive operations, etc.) is not available for now.

The team suggests that we set the Transaction Isolation Level to Read UNCOMMITTED for this SP. I would like to know better about locks before I go ahead.

P_SearchProducts returns 5 recordsets each one could contains from 1 to 200 rows. To achieve the results, it creates about 10 intermediate tables (SELECT ... INTO #TableX) these temp tables are then used progressively to arrive to the final results. Roughly the volume of these temp tables could be double than the final results. The developer who wrote this SP is not a guru in SQL, there is room for improvement. But here are my questions:

Q1. Could the series SELECT ... INTO #TableX in P_SearchProducts prevent or lock another connection from executing the same SP? If yes, under which conditions?

Q2. Let's assume that P_SearchProducts has a slow execution time. Could it prevent another connection from updating the Product table? And thus leading to a deadlock situation? Something like another transaction (by User2) has obtained lock on most of Product tables, except the Product table which were being slowly read by User1 executing P_SearchProducts. But User1 cannot read the other product tables b/c there are locks by User2.

Q3. If the contention issue was provoked by the slow execution time of many request to exec
P_SearchProducts (let's assume there were suddenly 50 users on the web hitting the search product feature at the same time). Could the Read Uncommitted magically resolve the contention issue, providing we accept the consequences of the dirty read.

Sorry for the long post and thank you in advance for any help.

View 2 Replies View Related

Fail To Read Entire Table In .NET

Sep 20, 2007

The problem that I am having is that I am not getting the results from an entire table, just a small subset. The sql command is "Select * from login", which has always implied to me, get everything, to end of table, or, until I tell you to stop. I am getting exactly, 10 items as input, and then it stops. I am including the code below in the hopes that someone can spot what it is that I am doing wrong.

The purpose of the routine is to convert a user login database into a new, expanded format.

TIA, Tom


Imports Common.Utility.Utils

Partial Class UserDatabaseConversion

Inherits System.Web.UI.Page

Dim sqlConn As SqlConnection = getSQLConnection(ConfigurationManager.AppSettings("utilityDbName"))

Dim sqlConnN As SqlConnection = getSQLConnection(ConfigurationManager.AppSettings("utilityDbName"))

Dim sqlStringOld As String = "Select * from login"

Dim sqlStringNew As String = "usp_UT_AddNewUser"

Dim buildCnt As Integer = 0

Dim oldUserCnt As Integer = 0

Dim newUserCnt As Integer = 0

Dim oLocation As String = Nothing

Dim errors As Integer = 0

Dim mesg As String = Nothing

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

getOldUsers()

End Sub

Sub getOldUsers()

Dim odate As Date = Date.Today

Dim sqlCmdOld As SqlCommand = New SqlCommand()

sqlCmdOld.CommandText = sqlStringOld

sqlCmdOld.CommandType = CommandType.Text

sqlCmdOld.Connection = sqlConn

Dim dbReader As SqlDataReader = Nothing

Try

sqlConn.Open()

dbReader = sqlCmdOld.ExecuteReader()

If dbReader.HasRows Then

Do While dbReader.Read()

oldUserCnt += 1

Select Case IsDBNull(dbReader.Item("reg_date"))

Case True

buildNewUser(dbReader.Item("name"), dbReader.Item("password"), dbReader.Item("email"), dbReader.Item("type"), dbReader.Item("org"), dbReader.Item("occupation"), dbReader.Item("location"), odate)

Case False

buildNewUser(dbReader.Item("name"), dbReader.Item("password"), dbReader.Item("email"), dbReader.Item("type"), dbReader.Item("org"), dbReader.Item("occupation"), dbReader.Item("location"), dbReader.Item("reg_date"))

End Select

Loop

End If

Catch ex As Exception

Finally

sqlConn.Dispose()

End Try

If errors = 0 Then

lblMesg.Text = "Conversion completed succesfully.<br />Users In: " & oldUserCnt & " , Users Out:" & newUserCnt

Else

lblMesg.Text = "Conversion comleted with errors.<br />Users In: " & oldUserCnt & " , Users Out:" & newUserCnt & "<br />"

lblMesg.Text += mesg

End If

End Sub

Sub buildNewUser(ByVal oname As String, ByVal opassword As String, _

ByVal oemail As String, ByVal otype As String, _

ByVal oorg As String, ByVal oocc As String, _

ByVal oloc As String, ByVal oregdate As Date)

Dim sqlCmdNew As SqlCommand = New SqlCommand()

sqlCmdNew.CommandText = sqlStringNew

sqlCmdNew.CommandType = CommandType.StoredProcedure

sqlCmdNew.Connection = sqlConnN

Dim userName As String = Nothing

Dim firstName As String = Nothing

Dim middleName As String = Nothing

Dim lastName As String = Nothing

Dim title As String = Nothing

Dim emailAddress As String = Nothing

Dim passWord As String = Nothing

Dim userType As String = Nothing

Dim org As String = Nothing

Dim occ As String = Nothing

Dim loc As String = Nothing

Dim rdate As Date = Nothing

oLocation = oloc

' user name will be the first part of the email address

emailAddress = oemail

Dim uname() As String = oemail.Split("@")

' extend the length of the user name to at least 5 characters

Select Case uname(0).Length

Case Is > 4

userName = uname(0)

Case Is = 4

userName = uname(0) & "1"

Case Is = 3

userName = uname(0) & "12"

Case Is = 2

userName = uname(0) & "123"

Case Is = 1

userName = uname(0) & "1234"

End Select

' check for suffixes

Dim suffix() As String = oname.Split(",")

Select Case suffix.Length > 1

Case True

title = suffix(1)

End Select

' split names out

Dim names() As String = suffix(0).Split(" ")

' possibly 3 components to the name

Select Case names.Length

Case Is = 1

firstName = names(0)

Case Is = 2

firstName = names(0)

lastName = names(1)

Case Is = 3

firstName = names(0)

middleName = names(1)

lastName = names(2)

End Select

' setup password. must be at least 6 characters.

' if less, extend to 6.

Select Case opassword

Case Is > 5

passWord = opassword

Case Is = 5

passWord = opassword & "1"

Case Is = 4

passWord = opassword & "12"

Case Is = 3

passWord = opassword & "123"

Case Is = 2

passWord = opassword & "1234"

Case Is = 1

passWord = opassword & "12345"

End Select

' user type, organization and occupation

userType = otype

org = oorg

occ = oocc

' registration date

Select Case IsDBNull(oregdate) Or IsNothing(oregdate)

Case True

rdate = Today.Date

Case False

rdate = oregdate

End Select



' try to extract the location

' get the country

Dim country As String = getCountry(oloc)

' get the state

Dim state As String = getState(oloc)

' only thing left is the city

Dim city() As String = oloc.Split(",")

' add parameter values

sqlCmdNew.Parameters.AddWithValue("@NamePrefix", System.DBNull.Value)

sqlCmdNew.Parameters.AddWithValue("@FirstName", replaceSingleQuote(firstName))

Select Case IsNothing(middleName)

Case True

sqlCmdNew.Parameters.AddWithValue("@MiddleName", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@MiddleName", replaceSingleQuote(middleName))

End Select

Select Case IsNothing(lastName)

Case True

sqlCmdNew.Parameters.AddWithValue("@LastName", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@LastName", replaceSingleQuote(lastName))

End Select

sqlCmdNew.Parameters.AddWithValue("@UserName", replaceSingleQuote(userName))

Select Case IsNothing(title)

Case True

sqlCmdNew.Parameters.AddWithValue("@NameTitle", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@NameTitle", title)

End Select

sqlCmdNew.Parameters.AddWithValue("@Password", replaceSingleQuote(passWord))

sqlCmdNew.Parameters.AddWithValue("@EmailAddress", emailAddress)

sqlCmdNew.Parameters.AddWithValue("@PasswordHint", userName)

Select Case isEmpty(org)

Case True

sqlCmdNew.Parameters.AddWithValue("@Organization", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@Organization", replaceSingleQuote(org))

End Select

Select Case isEmpty(occ)

Case True

sqlCmdNew.Parameters.AddWithValue("@Occupation", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@Occupation", replaceSingleQuote(occ))

End Select

sqlCmdNew.Parameters.AddWithValue("@Address1", System.DBNull.Value)

sqlCmdNew.Parameters.AddWithValue("@Address2", System.DBNull.Value)

Select Case isEmpty(city(0))

Case True

sqlCmdNew.Parameters.AddWithValue("@City", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@City", replaceSingleQuote(city(0)))

End Select

sqlCmdNew.Parameters.AddWithValue("@ZipCode", System.DBNull.Value)

sqlCmdNew.Parameters.AddWithValue("@PostalCode", System.DBNull.Value)

Select Case IsNothing(state)

Case True

sqlCmdNew.Parameters.AddWithValue("@State", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@State", state)

End Select

sqlCmdNew.Parameters.AddWithValue("@Other", System.DBNull.Value)

Select Case IsNothing(country)

Case True

sqlCmdNew.Parameters.AddWithValue("@Country", System.DBNull.Value)

Case False

sqlCmdNew.Parameters.AddWithValue("@Country", country)

End Select

sqlCmdNew.Parameters.AddWithValue("@GeneralEmail", False)

sqlCmdNew.Parameters.AddWithValue("@FundRaiseEmail", False)

sqlCmdNew.Parameters.AddWithValue("@GeneralUSPSMail", False)

sqlCmdNew.Parameters.AddWithValue("@FundRaiseUSPSMail", False)

sqlCmdNew.Parameters.AddWithValue("@DateAdded", rdate)

sqlCmdNew.Parameters.AddWithValue("@DateUpdated", rdate)

sqlCmdNew.Parameters.AddWithValue("@Active", True)

sqlCmdNew.Parameters.AddWithValue("@UserType", userType)

Dim iRows As Integer = 0

' try to insert the row into the table

Try

sqlConnN.Open()

iRows = sqlCmdNew.ExecuteNonQuery()

If iRows <> 1 Then

errors += 1

mesg += "<br />User: " & firstName & " " & lastName & " was not added.<br />"

End If

newUserCnt += 1

Catch ex As Exception

Dim exMsg As String = ex.Message.ToString()

writeApplicationLog(exMsg, ConfigurationManager.AppSettings("UtilityDBName"))

errors += 1

mesg += "<br />User: " & firstName & " " & lastName & " was not added due to " & exMsg & "<br />"

Finally

sqlConnN.Close()

sqlCmdNew.Dispose()

End Try

End Sub

Function getState(ByVal loc As String) As String

Dim state As String = Nothing

If loc.Contains("NY") Then

state = "NY"

ElseIf loc.Contains("WA") Then

state = "WA"

ElseIf loc.Contains("PA") Then

state = "PA"

ElseIf loc.Contains("AZ") Then

state = "AZ"

ElseIf loc.Contains("MI") Then

state = "MI"

ElseIf loc.Contains("WI") Then

state = "WI"

ElseIf loc.Contains("CT") Then

state = "CT"

ElseIf loc.Contains("NC") Then

state = "NC"

ElseIf loc.Contains("CA") Then

state = "CA"

ElseIf loc.Contains("NY") Then

state = "NJ"

End If

Return state

End Function

Function getCountry(ByVal cntry As String) As String

Dim country As String = "US"

If cntry.Contains("Canada") Then

country = "CA"

End If

Return country

End Function

End Class

View 1 Replies View Related

Uncommitted Transaction

Oct 19, 2007



Dear friends,

Transaction means the actions user perform in a database, like create table, update, select. Is that correct? Can back up or restore be transactions?

I recently read the tool-kit book and encountered 'uncommitted transactions' many times, esp. in the chapter of 'Backup and Recovery'. For example, today I wanna backup my database by backuping a full database, then three hours later performing a differential backup, and five mins later do transaction log backup. Then I restore those backups following the same sequence. When I restore diferential backup and log backup, I have the option to use one of the three options:

Leave the database ready for use by rolling back the uncommitted transactions. Additional transaction logs cannot be restored. (RESTORE WITH RECOVERY)



Leave the database non-operational, and do not roll back the uncommitted transactions. Additional transaction logs can be restored. (RESTORE WITH NORECOVERY)



Leave the database in read-only mode. Undo uncommitted transactions, but save the undo actions in a standby file so that recovery effects can be reverted. (RESTORE WITH STANDBY)


In the definitions above, 'uncommitted transactions' are all mentioned.

I do not understand why uncommitted transaction happned during or before or after backup( in my opinion, all transactions should be committed before you doing backup)? Can you please give me an example?



Thank you

Julian

View 5 Replies View Related

SQL Server 2005 Hanging - Selecting Uncommitted Data

Dec 5, 2006

We have found an issue with using MSS 2005 with odbc connections, some of
our code inserts data, then reselects the data back with a select using a
different handle. This hasn't caused any issues before but in one customer
this causes a lock up. The timeout error doesn't occur as you would expect
if trying to select data that is uncommitted by another user.

Although obviously we could re-code to avoid selecting uncommitted rows, can
anyone tell me why this works sometimes but not others. Some kind of
setting in MSS that we're unaware of maybe. The code works ok on other MSS
2005 & MSS 2000 servers and oracle & sqlbase.

View 1 Replies View Related

Transact SQL :: Making Server Database Read / Write From Read Only

Jan 12, 2012

i attached adventure works in sql server 2008 and it showing as read only ,make it read write or remove read only tag from database.

View 11 Replies View Related

SQL 2012 :: Identify Whether Files Are In Read / Write Or Read Only

Mar 24, 2015

How to identify whether the files are in read write or read only?

View 1 Replies View Related

Recovery :: Switch (Standby / Read-Only) DB To Be Read And Write

Aug 26, 2015

I'm trying to do Sharepoint DR with Log Shipping and every thing configured except one thing which is switch the WSS_Content (Standby /Read-Only) DB to be ready and Write. 

I tried from

GUI or ALTER DATABASE [WSS_Content] SET
READ_WRITE WITH NO_WAIT

but I received the below error: 

Database WSS_Content is in Warm Standby 

View 9 Replies View Related

Reset Database Files From Read-only To Read-write

Jan 18, 2008

I have two database files, one .mdf and one .ndf. The creator of these files has marked them readonly. I want to "attach" these files to a new database, but cannot do so because they are read-only. I get this message:

Server: Msg 3415, Level 16, State 2, Line 1
Database 'TestSprintLD2' is read-only or has read-only files and must be made writable before it can be upgraded.

What command(s) are needed to make these files read_write?

thanks

View 7 Replies View Related

Read Text File From SQL Server, Read Its Content, And Load It In RichTextBox (Related Component: Context.Response.BinaryWrite(), And StreamReader)

Nov 26, 2007

OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.

View 1 Replies View Related

SQL 2012 :: Read Committed For Read Only Database?

Jun 27, 2014

i have a database which get refreshed every day from client's data . and we need to pull heavy data from them every day as reports . so only selects happens on that database.

we do daily population of some table in some other databases from this daily refreshed DB.

will read uncommitted or NOLOCK with select queries to retrieve data faster.

there will be no dirty read as there are NO DML operation in that database so for SELECT which happens concurrently on these tables , will NOLOCK work?

View 2 Replies View Related

SQL 2012 :: Change Read-only And Read-write

Aug 15, 2014

Can a user of db owner role of a database change the databse option to read only and read-write?If not what permission I need to grant to the user?

View 1 Replies View Related

Run Entire Package

Feb 13, 2006

Hello,

i have a problem that i don't understand why it occurs: i have a package like this (resumed and ordered by its correspondingdata flow):

1. move data files to a path through by a file system task

2. import data of data files to a sqlserver database (each file through its own data flow). The origin of data is in files that have been moved to the path of step 1

3. execute a procedure of database (sql task) to manipulate data and finally export resume (data flow) to a new file in the path (moved by other file system task)

PROBLEM: if i execute the package task by task (one by one), it runs ok, but then when i build and run package as a whole (debug), it produces an error in the data flow such as it doesnt' find the path to take data of data flow (it doesn't find the source). Really it doesn't find source because the data files aren't in its correct path (like step 1 had failed). In summary, it looks like if the order of the task of package aren't correct when i execute the entire package, because the log doesn't thread any error about step 1 (file system task).

ERROR MESSAGE: an OLE DB error has occurred. Error code: 0x80040E37

Thanks for any help.

Gema

View 3 Replies View Related

Query Entire DB

Aug 13, 2007

I need to search all of the tables in a DB for a specific number (say, 123456). I am unsure of which tables may have this number in it. Is there a way to search an entire DB for a specific criteria?

This is what I want:

Select *
From [db]
where [column] like '%123456%'

I understand why this dosen't work (the DB doesn't have column names), but is there a way to display table names where this number exists? If I had that, then I could search the tables individually.

View 3 Replies View Related

Come On SQLdatareader....read....read....read...ok Help.

Mar 12, 2004

OK, I'm using VS2003 and I'm having trouble. The page works perfectly when I created it with WebMatrix but I want to learn more about creating code behind pages and this page doesn't work. I think it has some things to do with Query builder but I can't seem to get change outside "please register". I have the table populated and it is not coming back with "login successful" or "password wrong" when I've entered correct information. Enclosed is what I've done in VS2003. Can you see where my error is? Any help would be greatly appreciated.
Thanks again.

Imports System.data.sqlclient
Imports System.Data
Public Class login2
Inherits System.Web.UI.Page

#Region " Web Form Designer Generated Code "

'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.SqlCommand1 = New System.Data.SqlClient.SqlCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "server=LAWORKSTATION;user id=sa;database=test;password=t3st"
'
'SqlCommand1
'
Me.SqlCommand1.CommandText = "SELECT pass FROM Customer WHERE (email = 'txtusername.text')"
Me.SqlCommand1.Connection = Me.SqlConnection1

End Sub
Protected WithEvents lblUsername As System.Web.UI.WebControls.Label
Protected WithEvents lblPassword As System.Web.UI.WebControls.Label
Protected WithEvents txtUsername As System.Web.UI.WebControls.TextBox
Protected WithEvents txtPassword As System.Web.UI.WebControls.TextBox
Protected WithEvents btnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents lblMessage As System.Web.UI.WebControls.Label
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents SqlCommand1 As System.Data.SqlClient.SqlCommand

'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object

Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub

#End Region

Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub

Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
SqlConnection1.Open()
Dim dr As SqlDataReader = SqlCommand1.ExecuteReader
If dr.Read() Then
If dr("password").ToString = txtPassword.Text Then
lblMessage.Text = "login successful"
Else
lblMessage.Text = "Wrong password"
End If
Else
lblMessage.Text = "Please register"
End If
dr.Close()
SqlConnection1.Close()
End Sub
End Class

View 8 Replies View Related

How Can I Script An Entire Database

Jul 31, 2007

What is the best way to create a blank copy of my database? I really want some of the tables to keep the data in them, these are some of the lookup table.
I appreciate your help.

View 4 Replies View Related

How To Preserve Entire Database

Jul 12, 2005

Hi, I'm a noob who sucks at programming, and sucks even more when it comes to database.

I'm operating a small website with an SQL Server database that drives my shopping cart. I want to close this website down, but I don't want to lose all the data in the database in case I want to do something in the future.

How do you backup the entire database into a file so i might be able to import it at later times? Do I have to do this with SQL, T-SQL, or the manager?

View 3 Replies View Related

Reading The Entire Column?

Apr 11, 2007

Hi.

I have a long TEXT column and it cuts off at a certain point
in the Query Analyzer. I tried copying and pasting to notepad
but it is still half the actual string. How do i get the whole
TEXT string from a given column?

Thanks!

View 3 Replies View Related

Copy Entire DB On Same Server

Jun 3, 2004

Hi All,

Could anybody tell me how to make a copy of an entire database on the same server? The copy wizard won't allow the a copy to be made on the same server.

And I believe I won't be able to detach the database and re-attach it to a newly created database with a different name.

Thanks in advance!

View 1 Replies View Related

How To Duplicate An Entire Database

Jul 23, 2004

I have built a template database which I'm finally pleased with, however I want to periodically duplicate the design - not data into a new database. How can I duplicate a database? I was hoping to right mouse, copy, then right mouse, paste, and then be prompted for the new name but no such luck.

View 6 Replies View Related

Searching Entire Database

Mar 11, 2004

Is there any way to do a complete database search in SQL server? For instance, if I have a criteria "DBFORUMS", I would like to scan through all user tables in my database to get all records with the word "DBFORUMS" stored, just like want we are doing in "Quick Search" in dbforums site.

Any ideas?

Thanks in advance.

View 6 Replies View Related

Ltrim Entire Column

Jun 16, 2008

How do I "ltrim" an enire colum?

Thanks,

View 2 Replies View Related

Searching The Entire Database

Aug 28, 2005

Hi friends

Suppose i have a table of 100 cols and 10000 rows i want to search a particular field called 'Newyork' . I dont no what the col is ?

Can anyone tell me how can i search that



Vicky

View 2 Replies View Related

Searching An Entire Database

Dec 28, 2005

Hi, this is my first post on these forums, so please excuse me if this topic has already been covered.

I'm currently working in a power station for student vacation work placement. I need to export data from a database that gets it's data from machinery and inputs out in the plant. The machines that provide this input put it into a database, and I need to find the relevant data to export.

My problem is that, in some cases, the sample data that i'm given may be under different field names, in a completely unrelated table. I was looking for a way to search the entire database (250+ tables) for a certain string, so I can find where it is in the database, and run queries on the table it originates from. For example:

My sample data shows me that I have an object with the ID Y03A3DEA_TH1. I know this ID will occur somewhere else in the database, but i'm just not sure where.

If anyone knows of any way that I can search the entire database for specific data, either using tools in MS SQL 2000, or 3rd party apps, i would greatly appreciate their help.

Thanks a lot,
Jack Smith

View 2 Replies View Related

Add An Entire Table To Another (no Replace)

May 16, 2006

Hi! I've some data in a table, and I want to add these records to another table, but I tried yet with select ... Into ... and I lose all the data from this one. I need to ADD the data from table to table. Any suggestion?
Thx

View 3 Replies View Related

How Do You Lock An Entire Table?

Jul 23, 2005

Hi,I need to lock a table so that Inserts are prevented as well as deleted andupdates. At present I'm thinking this might do it:SELECT * FROM myTable WITH(UPLOCK)but then again I'm not sure whether this will cover the insert case.Thanks,Robin

View 5 Replies View Related

Copying Entire Database

Feb 4, 2008



Hi,

Is it possible to copy a database from the existing database. I mean to say creating a duplicating database.

Note: I can do it by using "Generate SQL Server Script Wizard" or "Database Publishing Wizard" which saves a some filename.sql and later executing this will create another database by assigning some xyzdatabase name.

My main motive is copying a database in a single line script without using this lengthy sciprt.

Example

FirstDatabase (contains 10 tables 10 stored procedures)
SecondDatabase (also contains 10 tables 10 stored procedures)

If possible, can you write a script that attach a database from the C:MyTemporaryDatabase

Because this i need through programming Visual Basic using SQL Server. I want to create some temporary database.


Waiting for your reply.

Thanks.


Best Regards
Kashif Chotu

View 5 Replies View Related

Sql Script Entire Database

Jan 20, 2007

Im building a site on my pc using SQLExpress and i have a question about something. The database im working on has data inside the tables and i was wondering how i would move that to a different server though a script with all the data in the table.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved