Dear folks,
In My Query i am using where in condition .It return multiple record .I want store it in to cursor and perform the operation.
Declare @sql varchar(5000);
set @sql='select * from Role where Role_id in('+ @role_ids +')';
Exec @sql;
I want take this record set in to cursor .How to do it.
please help me.
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies View RelatedI've looked up Books Online on Dynamic Cursor/ Dynamic SQL Statement.
Using the examples given in Books Online returns compilation errors. See below.
Does anyone know how to use Dynamic Cursor/ Dynamic SQL Statement?
James
-- SQL ---------------
EXEC SQL BEGIN DECLARE SECTION;
char szCommand[] = "SELECT au_fname FROM authors WHERE au_lname = ?";
char szLastName[] = "White";
char szFirstName[30];
EXEC SQL END DECLARE SECTION;
EXEC SQL
DECLARE author_cursor CURSOR FOR select_statement;
EXEC SQL
PREPARE select_statement FROM :szCommand;
EXEC SQL OPEN author_cursor USING :szLastName;
EXEC SQL FETCH author_cursor INTO :szFirstName;
--Error--------------------
Server: Msg 170, Level 15, State 1, Line 23
Line 23: Incorrect syntax near ';'.
Server: Msg 1038, Level 15, State 1, Line 24
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 1038, Level 15, State 1, Line 25
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 170, Level 15, State 1, Line 27
Line 27: Incorrect syntax near ';'.
Server: Msg 170, Level 15, State 1, Line 30
Line 30: Incorrect syntax near 'select_statement'.
Server: Msg 170, Level 15, State 1, Line 33
Line 33: Incorrect syntax near 'select_statement'.
Server: Msg 102, Level 15, State 1, Line 35
Incorrect syntax near 'author_cursor'.
Server: Msg 170, Level 15, State 1, Line 36
Line 36: Incorrect syntax near ':'.
I need to pass a list of values into a cursor as such...
DECLARE
@group_SQL varchar(255)
SET @group_SQL = 'SELECT group_id FROM groups where group_id in (' + @group_id + ')'
DECLARE groupContact_import_cursor CURSOR
FOR EXEC(@group_SQL)
OPEN groupContact_import_cursor
FETCH NEXT FROM groupContact_import_cursor INTO @group_id
WHILE (@@FETCH_STATUS = 0)
BEGIN
insert into groupContacts (group_id, contact_id) values (@group_id, @new_cid)
FETCH NEXT FROM groupContact_import_cursor INTO @group_id
END
CLOSE groupContact_import_cursor
DEALLOCATE groupContact_import_cursor
But MS SQL doesn't seem to like the FOR EXEC(@group_SQL). Can someone shed some light?
TIA
I am trying to use a dynamic cursor in a stored procedure:
The code looks like this :
/************************************************** ***
set @sFormula = 'Monthlyformula'
set @sStartDate = '02/01/2004'
set @sEndDate = '02/01/2004'
exec('DECLARE APPGRIDROWS_METRICS CURSOR FOR select populateid From appgridrows where histdisplaygrid = 3 And '+ @sFormula +' Is Null and exists (SELECT 1 From PAYROLL_DATA_PERIOD as h Where h.id=1 and h.populateid=appgridrows.populateid and h.StartDate between '+ @sStartDate +' and '+ @sEndDate +')' )
/************************************************** ***
And this is what it is interpreting
select populateid From appgridrows where histdisplaygrid = 3 And Monthlyformula Is Null and exists (SELECT 1 From PAYROLL_DATA_PERIOD as h Where h.id=1 and h.populateid=appgridrows.populateid and h.StartDate between 02/01/2004 and 02/01/2004)
My problem is Is there anyway that I can put the quotes before those dates('02/01/2004') so that my cursor has some records returned
Thanks in advance
SK
Hi All€¦
I need to bind a DataGrid to server dynamic cursor.
Please help!
Hello..
Can you declare a cursor with dynamic SQL?
I have a situation where the SQL for my cursor MUST be assembled in a buffer, but I cannot get the cursor declaration to accept my buffer as the SQL statement.
these attempts did not work:
DECLARE crsCursor CURSOR FOR @vchrSQL
DECLARE crsCursor CURSOR FOR (@vchrSQL)
Does anybody know if you definitely can or definitely cannot use dynamic SQL with cursors?
Hi all
I am trying to do dynamic Select for Cursor. The dynamic would be like this:
IF CONDITION1 IS TRUE:
SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID
FROM dbo.tnd_TenderSiteRateConsumptionView
WHERE CustomerTenderID = @CustomerTenderID
IF CONDITION2 IS TRUE:
SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID
FROM dbo.tnd_TenderSiteRateConsumptionView
WHERE CustomerTenderID = @CustomerTenderID AND
CustomerSiteID = @CustomerSiteID
etc etc
Here's the cursor
DECLARE RateList CURSOR FOR
SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID
FROM dbo.tnd_TenderSiteRateConsumptionView
WHERE (BASED ON CONDITION)
ORDER BY CustomerTenderID,
CustomerSiteID,
SupplierID,
ContractPeriod
OPEN RateList
FETCH NEXT FROM RateList
INTO@CustomerTenderID, @ReturnedCustomerSiteID, @ReturnedContractPeriod, @ReturnedSupplierID
WHILE @@FETCH_STATUS = 0
BEGIN
SET @rowNum = @rowNum + 1
-- DO SOME FUNKY STUFF
FETCH NEXT
FROM RateList
INTO@CustomerTenderID, @ReturnedCustomerSiteID, @ReturnedContractPeriod, @ReturnedSupplierID
Help please,Have a situation when converting from Oracle SP's to SQL SP's. The oldoracle cursor was roughly as followsCURSOR cur_rsStock ISselect*from(select StockRowId, CategoryIdfromSTOCKDISPOSABLEwhereSTOCKDEFID=numDefIdORDER BYSTOCKROWID)whereROWNUM <= numQuantity;The closest I can get in MS SQL is as follows :declare cur_rsStockCURSOR forselect top @numQuantityStockRowId, CategoryIdfromSTOCKDISPOSABLEwhereSTOCKDEFID=numDefIdORDER BYSTOCKROWIDBut, SQL doesn't allow variables next to top. I know I can assign the wholeselect statement to a string and use exec to exec the string to get arecordset but how can I point a cursor to receive its output?i.e.set @strSQl = select top ' + @numQuantity + ' StockRowId, CategoryId.......exec @strSQLbut how do I dodeclare cur_rsStockset cur_rsStock = ( exec @strSQL)Flapper
View 4 Replies View RelatedHi Everybody,I have a probs with dynamic generation.I am writing the probs======================================create proc testasdeclare @query varchar(500)set @query = 'select * from table'----------------------------------------------declare mycur Cursor for Select * from table |open mycur |----------------------------------------------but instate of above block how can I dynamically generate this query?---------------------------------------declare mycur Cursor for exec (@query) |---------------------------------------Or tell me the way.RegardsArijit Chatterjee
View 2 Replies View RelatedHi,is it possible to create a cursor from a dynamic string?Like:DECLARE @cursor nvarchar(1000)SET @cursor = N'SELECT product.product_idFROM product WHERE fund_amt > 0'DECLARE ic_uv_cursor CURSOR FOR @cursorinstead of using this--SELECT product.product_id--FROM product WHERE fund_amt > 0 -- AND mpc_product.status= 'aktiv'Havn't found anything in the net...Thanks,Peppi
View 5 Replies View RelatedHello everybody!I have a small table "ABC" like this:id_position | value---------------------------1 | 112 | 223 | 33I try to use a dynamic cursor as below.When the statement "order by id_position" in declare part of the cursor_abcis omitted - cursor work as it should.But when the statement "order by id_position" is used, cursor behave asstatic one.What's the matter, does anybody know?Code:declare @id_position as int, @value as intDECLARE cursor_abc CURSORFORselect id_position, value from abcorder by id_positionset nocount onopen cursor_abcFETCH NEXT FROM cursor_abcINTO @id_position, @valueWHILE @@FETCH_STATUS = 0BEGINprint @id_positionprint @valueprint '----------------------------'update abc set value=666 --next reading should give value=666FETCH NEXT FROM cursor_abcINTO @id_position, @valueENDCLOSE cursor_abcDEALLOCATE cursor_abcGORegardsLucas
View 2 Replies View RelatedHi,
I am declaring the cursor based on a query which is generated dynamically. but it is not working
Declare @tempSQL varchar(1000)
--- This query will be generated based on my other conditon and will be stored in a variable
set @tempsql = 'select * from orders'
declare cursor test for @tempsql
open test
This code is not working.
please suggest
Nitin
i read in the SET ROWCOUNT documentation URL.... that 'The ROWCOUNT option does not affect dynamic cursors', it does affect my dynamic cursor created in a table function which looks like this :
CREATE FUNCTION MyTableFunction()Â
RETURNS @MyTable TABLE (MYFIELD INTEGER)
AS
BEGIN
 DECLARE @xxx INTEGER
 DECLARE My_Cursor CURSOR DYNAMIC FOR
Â
[code]...
I would like the number of rows retruned by MyTableFunction limited to 2, but NOT the inside proc cursor's select !Set Rowcount 0 is forbidden in table function. I cannot use TOP in select * from MyTableFunction instead of setting ROWCOUNT to 2. I'm using SQL Server 2008 or 2012.
I need im my aplication to meke a "Cursor" in a execution of a stored procedure.
For sample:
In a table with a report definition I have the "Fileds, From, Group, Order " clausulas and I need make a cursor with a contents of this fileds.
How can I do ???
My code:
Declare @idRelat int, @cmd_FROM nvarchar(1024), @cmd_Det nvarchar(50)
SELECT @idRelat = idRelat, @cmd_Det = cmd_DET
FROM Relatórios WHERE Nome = @p_Relat
Declare @Tot_Col smallint, @Tot_Lin smallint, @Campos smallint,
@Aux_Select nvarchar(1024), @Aux_Group nvarchar(1024), @Aux_Order nvarchar(1024)
Select @Tot_Col = 0
Select @Tot_Lin = 0
Select @Campos = 0
Select @Aux_Select = "SELECT " + @cmd_DET + "AS Soma"
Select @Aux_Group = "GROUP BY "
Select @Aux_Order = "ORDER BY "
Declare @a_Local char(1), @a_Linha smallint, @a_Campo nvarchar(50)
Declare cur_Aux insensitive cursor for
SELECT Local, Linha, Campo
From Relatórios_Margens
WHERE (idRelat = @idRelat)
ORDER BY Local, Linha
Open cur_Aux
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
While @@FETCH_status = 0 begin
If @a_Local = "C"
Select @Tot_Col = @Tot_Col + 1
Else
Select @Tot_Lin = @Tot_Lin + 1
Select @Campos = @Campos + 1
If @Aux_Group <> "GROUP BY " begin
Select @Aux_Group = @Aux_Group + ", "
If @Aux_Order <> "ORDER BY " begin
Select @Aux_Order = @Aux_Order + ", "
Select @Aux_Select = sSelect + ", " + @a_Campo + " AS Campo" + @Campos
Select @Aux_Group = @Aux_Group + @a_Campo
Select @Aux_Order = @Aux_Order + @a_Campo
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
End
Select @Aux_Select = @Aux_Select
-- <<<< MONTA COMANDO SQL
Select @Aux_Select = @Aux_Select + " " + @cmd_FROM + " " + @p_Filtro + " " + @Aux_Group + " " + @Aux_Order
Declare @Cursor_Aux cursor
Set @Cursor_Aux = cursor for @Aux_Select
Open @Cursor_Aux
Not working !!!!
Hi,
In a stored procedure (SP1) I call another stored procedure (SP2), passing along parameters. In SP2 I dynamically build cursor c1. I can execute SP2 without any problems but when I start SP1 I get the following message:
Msg 16916, Level 16, State 1, Procedure SP2, Line 114
A cursor with the name 'C1' does not exist.
Yes, the cursor is of type GLOBAL. I am sure I miss something here ...
Any help is highly appreciated !
Thanks: Peter
The requirement is create a sql script(1 proc or cursor) which will create multiple procedures dynamically.
Table A
Col1Â
Col2
A
Alpha
For Example: If table A has 3 rows(distinct) so 3 procedures will be created dynamically.
Result:Â
1 PROC_A_ALPHA
2Â PROC_B_BETA
3Â PROC_C_charlie
Hi all.
I am stuck in a bit of a conundrum for quite a while now, and I hope someone here will help me figure this one out.
So, first things first: let me explain what I need to do. I am
designing a web application that will allow users to consult info
available in a SQL2000 database. The user will enter the search
criterea, and hopefully the web page will show matching results.
The problem is the results shown aren't available per se in the DB, I
need to process the data a bit. I decided to do so on the SQL Server
side, though the use of cursors. So, when a user defines his search
criteria, I run a stored procedure that begins by building a dynamic
sql query and creating a cursor for it. I used a global cursor in order
to do so. It looked something like this:
SET @sqlQuery = ... (build the dinamic sql query)
SET @cursorQuery = 'DECLARE myCursor CURSOR GLOBAL FAST_FORWARD FOR ' + @sqlQuery
EXEC @cursorQuery
OPEN myCursor
FETCH NEXT FROM myCursor INTO ...
CLOSE myCursor
DEALLOCATE myCursor
This works fine, if there's only one instance of the
stored procedure running at a time. Should another user connect to the
site and run a search while someone's at it, it'll fail due to the
atempt to create a cursor with the same name.
My first thought was to make the cursor name unique, which led me to:
...
SET @cursorName = 'myCursor' + @uniqueUserID
SET @cursorQuery = 'DECLARE '+ @cursorName + 'CURSOR FAST_FORWARD FOR ' + @sqlQuery
EXEC @cursorQuery
...
The problem with this is that I can't do a FETCH NEXT FROM @cursorName since
@cursorName is a char variable holding the cursor name, and not a
cursor variable. So to enforce this unique name method the only option
I have is to keep creating dynamic sql queries and exucting them. And
this makes the sp a bitch to develop and maintain, and I'm guessing it
doesn't make it very performant.
So I moved on to my second idea: local cursor variables. The problem with
this is that if I create a local cursor variable by executing a dynamic
query, I can't extract it from the EXEC (or sp_executesql) context, as
it offers no output variable.
I guess my concrete questions are:
Is it possible to execute a dynamic sql query and extract a (cursor) variable from it?Is it possible to populate a local cursor variable with a global cursor, by providing the global cursor's name?Can I create a local cursor variable for a dynamic sql query? How?
Anybody sees another way arround this?Thanks in advance,
Carlos
I need to find all uses of special characters in a database. I used the following code to do this:
USE dbName
GO
IF OBJECT_ID('tempdb.dbo.#Results') IS NOT NULL DROP TABLE #Results
GO
[code]...
This will check all tables in the database, but if you want to check specific tables you can uncomment the line in the where clause and specify tables to be checked. The query will return any text fields that have any characters other than letters, numbers or spaces.
This code works fine for me because all the tables in my database have single column primary keys. However I know how much Jeff Moden hates cursors or RBAR queries, so my question is could this have been done by any method other than using a cursor?
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
           for select name, salary from ag
 open ll
            fetch from ll
Â
             while @@FETCH_STATUS=0
              fetch from ll
               update ag set salary=200 where 1=1
Â
  close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
Hi Craig/Kamal,
I got your email address from your web cast. I really enjoyed the web cast and found it to be
very informative.
Our company is planning to use SSIS (VS 2005 / SQL Server 2005). I have a quick question
regarding the product. I have looked for the information on the web, but was not able to find
relevant information.
We are getting Source data from two of our client in the form of Excel Sheet. These Excel sheets
Are generated using reporting services. On examining the excel sheet, I found out that the name
Of the columns contain data itself, so the names are not static such as Jan 2007 Sales, Feb 2007 Sales etc etc.
And even the number of columns are not static. It depends upon the range of date selected by the user.
I wanted to know, if there is a way to import Excel sheet using Integration Services by defining the position
Of column, instead of column name and I am not sure if there is a way for me to import excel with dynamic
Number of columns.
Your help in this respect is highly appreciated!
Thanks,
Hi Anthony, I am glad the Web cast was helpful.
Kamal and I have both moved on to other teams in MSFT and I am a little rusty in that area, though in general dynamic numbers of columns in any format is always tricky. I am just assuming its not feasible for you to try and get the source for SSIS a little closer to home, e.g. rather than using Excel output from Reporting Services, use the same/some form of the query/data source that RS is using.
I suggest you post a question on the SSIS forum on MSDN and you should get some good answers.
http://forums.microsoft.com/msdn/showforum.aspx?forumid=80&siteid=1
http://forums.microsoft.com/msdn/showforum.aspx?forumid=80&siteid=1
Thanks
Craig Guyer
SQL Server Reporting Services
Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.
So, is this possible using data driven subscriptions? Scenario is:
1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.
Any tips on how to get this working?
Thanks
Mark Smith
If anyone could confirm...
SQL Server 2000 SP4 to multiple SQL Server 2005 Mobile Edition on PDAs. My DB on SQL2k is published with a single dynamic row filter using host_name() on my 'parent' table and also join filters from parent to child tables. The row filter uses joins to other tables elsewhere that are not published to evaluate what data is allowed through the filter.
E.g. Published parent table that contains suppliers names, etc. while child table is suppliers' products. The filter queries host_name(s) linked to suppliers in unpublished table elsewhere.
First initial sync with snapshot is correct and as I expected - PDA receives only the data from parent (and thus child tables) that matches the row filter for the host_name provided.
However - in my scenario host_name <--> suppliers may later be updated E.g. more suppliers assigned to a PDA for use or vice versa. But when I merge the mobile DB, the new data is not downloaded? Tried re-running snapshot, etc., no change.
Question: I thought the filters would remain dynamic and be applied on each sync?
I run a 'harmless' update on parent table using TSQL e.g. "update table set 'X' = 'X'" and re-sync. Now the new parent records are downloaded - but the child records are not!
Question: I wonder why if parent records are supplied, why not child records?
If I delete existing DB and sync new, I get the updated snapshot and all is well - until more data added back at server...
Any help would be greatly appreciated. Is it possible (or not) to have dynamic filters run during second or subsequent merge?
I'm new to cursors, and I'm not sure what's wrong with this code, it run for ever and when I stop it I get cursor open errors
declare Q cursor for
select systudentid from satrans
declare @id int
open Q
fetch next from Q into @id
while @@fetch_status = 0
begin
declare c cursor for
Select
b.ssn,
SaTrans.SyStudentID,
satrans.date,
satrans.type,
SaTrans.SyCampusID,
Amount = Case SaTrans.Type
When 'P' Then SaTrans.Amount * -1
When 'C' Then SaTrans.Amount * -1
Else SaTrans.Amount END
From SaTrans , systudent b where satrans.systudentid = b.systudentid
and satrans.systudentid = @id
declare @arbalance money, @type varchar, @ssn varchar, @amount money, @systudentid int, @transdate datetime, @sycampusid int, @before money
set @arbalance = 0
open c
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
while @@fetch_status = 0
begin
set @arbalance = @arbalance + @amount
set @before = @arbalance -@amount
insert c2000_utility1..tempbalhistory1
select @systudentid systudentid, @sycampusid sycampusid, @transdate transdate, @amount amount, @type type, @arbalance Arbalance, @before BeforeBalance
where( convert (int,@amount) <= -50
or @amount * -1 > @before * .02)
and @type = 'P'
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
end
close c
deallocate c
fetch next from Q into @id
end
close Q
deallocate Q
select * from c2000_utility1..tempbalhistory1
truncate table c2000_utility1..tempbalhistory1
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error:
Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18
Incorrect syntax near the keyword 'external'.
CREATE FUNCTION clrDynamicPivot
(
-- Add the parameters for the function here
@query nvarchar(4000),
@pivotColumn nvarchar(4000),
[code]....
I having a difficult time here trying to figure out what to do here.I need a way to scroll through a recordset and display the resultswith both forward and backward movement on a web page(PHP usingADO/COM)..I know that if I use a client side cursor all the records get shovedto the client everytime that stored procedure is executed..if thisdatabase grows big wont that be an issue?..I know that I can set up a server side cursor that will only send therecord I need to the front end but..Ive been reading around and a lot of people have been saying never touse a server side cursor because of peformance issues.So i guess im weighing network performance needs with the client sidecursor vs server performance with the server side cursor..I am reallyconfused..which one should I use?-Jim
View 1 Replies View RelatedI have a Stored Procedure for processing a Bill of Material.
One column on the Assembly Table is a Function Name that contains some busniess rules.
OK, now I'm doing a Proof of Concept and I'm stumped.
Huuuuh!
I will ultimately have about 100 of these things. My plan was using Dynamic SQL to go execute the function.
Note: The function just returns a bit.
So; here's what I had in mind ...
if isnull(@FnNameYN,'') <> ''
exec spinb_CheckYN @FnNameYN, @InvLineID, @FnBit = @FnBit output
CREATE PROCEDURE dbo.spinb_CheckYN
@FnNameYN varchar(50),
@InvLineID int,
@FnBit bit output
AS
declare @SQL varchar(8000)
set @SQL = '
if dbo.' + @FnNameYN + ' (' + convert(varchar(31),@InvLineID) + ')) = 1
set @FnBit = 1
else
set @FnBit = 0'
exec (@SQL)
GO
Obviously; @FnBit is not defined in @SQL so that execution will not work.
Server: Msg 137, Level 15, State 1, Line 4
Must declare the variable '@FnBit'.
Server: Msg 137, Level 15, State 1, Line 5
Must declare the variable '@FnBit'.
So; is there a way to get a value out of a Dynamic SQL piece of code and get that value INTO my OUTPUT variable?
My many thanks to anyone who can solve this riddle for me.
Thank You!
Sigh: For now, it looks like I'll have a huge string of "IF" statements for each business rule function, as follows:
Hopefully a better solution comes to light.
------ Vertical Build1 - Std Vanes -----------
if @FnNameYN = 'fnb_YN_B1_14'
BEGIN
if dbo.fnb_YN_B1_14 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
------ Vertical Build1 - Scissor Vanes -----------
if @FnNameYN = 'fnb_YN_B1_15'
BEGIN
if dbo.fnb_YN_B1_15 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
.
.
.
etc.
I have a requirment which i have partly accomplished , but could not get through completely
i have a file which comes in a standard format ending with date and seq number ,
suppose , the file name is abc_yyyymmdd_01 , for first copy , if it is copied more then once the sequence number changes to 02 and 03 and keep going on .
then i need to transform those in to new file comma delimited destination file with a name abc_yyyymmdd,txt and others counting file counting record abc_count_yyyymmdd.txt. and move it to a designated folder. and the source file is then moved to archived folder
what i have taken apprach is
script task select source file --------------------> data flow task------------------------------------------> script task to destination file
dataflow task -------------------------> does count and copy in delimited format
what is happening here is i can accomlish a regular source file convert it to delimited destination file --------> and move it to destination folder with script task .
but cannot work the dynamic pick of a source file.
please advise with your comments or solution you have
I am trying to create an ssis package with dynamic csv file as output. and out format contains query output.
sample file name:
Unique identifier + query output + systemdate();
The expression is looking like this.
@[User::FilePath] + @[User::FileName] + ".CSV"
-- user filepath is a variable from ssis package. File name is the output from SQL query. using script task i have assigned the values to @[User::FileName] .
When I debugged the script task the value getting properly but same variable am using for Flafile destination. but its not working.
I have created a dynamic SQL program that returns a range of columns (1 -12) based on the date range the user may select. Each dynamic column is month based, however, the date range may overlap from one year to another. Thus, the beginning month for one selection may be October 2005, while another may have the beginning month of January 2007.
Basically, the dynamic SQL is a derived Pivot table. The problem that I need to resolve is how do I now use this dynamic result set in a Report. Please keep in mind that the name of the columns change based on the date range select.
I have come to understand that a dynamic anything is a moving target!
Please advise.
I hope this is the appropriate forum for this question, if not then I apologize.
I've got a SQL Server 2000 stored procedure that returns data to be used in a crystal report in Visual Studio 2005. Most of the stored procedure works well, but there is a point where I need to calculate an average number of days been a group of date pairs.
I'm not familiar with cursors, but I think that I will need to use one to achieve the result I am looking for so I came up with the code below which is a snippet from my stored procedure. In this part of the code, the sp looks at the temporary table #lmreport (which holds all of the data that is returned at the end to crystal) and for every row in the table where the terrid is 'T' (the territory is domestic), it selects all of those territories from the territory table and loops through them to determine the date averages (by calling a nested stored procedure, also included below) for each territory and then updates #lmreport with that data.
When I try to run the stored procedure, I get "The column prefix '#lmreport' does not match with a table name or alias name used in the query." on the line indicated.
Does anyone have any idea what might be wrong or if this will even work the way I need it to?
Thank you in advance.