How Insert An Array Into Sql Server 2005 Using VB.2005
Mar 4, 2008I have the text file parsed into an array. How to insert that into SQLServer Database? (VB 2005)
Thanks,
Siby
ADVERTISEMENT
SQL Server 2005 Partitions And SAN Array
Jul 3, 2007
I am looking for information/suggestions in regards to portioning data across a large SAN. The database is several TB in size, and we are looking to partition the data on a date so that the current data is always the fastest available and history can be set as read only but still be available.
If the server has 8 drive letters how can I ensure that the 4 data drives are stripped across the most physical drives for the most through-put??
Are there any specific questions I need to ask the server technicians?
Any pitfalls I should be aware off??
Thanks!!!
Array Data Type In SQL Server 2005
Aug 9, 2006Hi,
I was migrating from Oracle to SQL Server 2005 using SSMA (SQL Server Migration Assistant) but i`ve found an issue, i can´t find how to fix it. In my stored procedure in PL/SQL exists this lines:
TYPE T_ARRAY_COL IS VARRAY (1000 ) OF VARCHAR2 (50);
A_COLUMNS T_ARRAY_COL := T_ARRAY_COL();
Somebody know how can i simulate this data type ARRAY. I was reading http://msdn.microsoft.com/msdnmag/issues/04/02/TSQLinYukon/ but some things are not clear for me.... please help me, give me one hand.
Thank you
David
Passing A List/array To An SQL Server Stored Procedure 2005
Aug 16, 2007Hi, I m using sql 2005 as a back end in my application...
I am useing Store procedure..for my data in grid..
ALTER PROCEDURE [dbo].[ProductZoneSearct]
(
@Productid char(8),@Proname char(8),@radius int,@mode varchar(5) = 'M',@Zone nvarchar(1000),)
ASSET NOCOUNT ON;Create Table #Product (ProductID int, TimeEntered datetime, DateAvailable datetime, Productname varchar(80), City varchar(50), State char(4),Miles decimal, Payment varchar(40),UserID int, Phone varchar(15))
Insert #Product Select ProductID , TimeEntered, DateAvailable, Productname ,City,State,miles,Payment ,Miles, UserID, Daily, PhoneFrom [tblproduct] Where city IN (@Zone)
Select ProductID TimeEntered, DateAvailable, Productname City,State,miles,Payment ,Miles, U.Phone As phoneNumber, Company, , L.Phone As cmpPhone From #Product As L Left Join (Select UserID, Company, Phone, From [User]) As U On U.UserID = L.UserID Order By DateAvailable
if i pass value in "where city in (@Zone)" and @Zone ='CA','AD','MH' then it can not get any result..but if write where city in ('CA','AD','MH') then it give me perfact result..
I tried to below syntax also but in no any user Where city IN ('+@Zone+')
In short if i pass value through varibale (@Zone) then i cant get result...but if i put direct value in query then only getting result..can anybody tell me what is problem ?
Please Hel[p me !!!
Thank you !!!
Insert Images In SQL 2005 Express DB, Using C# Code For Asp.net 2.0 (VS 2005)
Aug 31, 2006Help!
I found about a dozen samples and articles in the net about inserting images in a sql database, but they were either using VB, or asp only or SQL 2000 and although I tried them all, none worked...
Can you help me by posting some code on how to insert images in SQL 2005, using C# in Visual Studio 2005 (asp.net 2.0)
Thanks.
SQL Server 2005 - Insert Problem
Apr 30, 2008Hi All
I have a table in my database called YM_WEB_APPLICATIONS in this table I have a field called ApplicationID everytime an insert happens this increments by one. Inserts work fine if I don't set this ApplicationID as a primary key, but I set it as a primary key inserts will not happen, there is no error so I'm a bit stumped. Any ideas?
Here is an extract of my SQL statement: -
strsqlinsert = "INSERT INTO YM_WEB_APPLICATIONS ( "strsqlinsert += "Surname, Forenames, Title, DOB, EmailAddress, Gender, EmergencyContactName, EmergencyContactNumber, "strsqlinsert += "Convictions, ConvictionsList, NationalIdentity, NationalIdentityOther, Ethnicity, EthnicityOther, FirstLanguage, FirstLanguageOther, PreferredLanguage, SpeakWelsh,"strsqlinsert += "HouseNoStreet, Locality, Town, County, Postcode, HomeTelephoneNumber, MobileTelephoneNumber,"strsqlinsert += "Qualifications, SchoolCollege1, From1, To1, SchoolCollege2, From2, To2, Employment,"strsqlinsert += "Disabilities, MedicalCondition, SpecialArrangements,"strsqlinsert += "Marketing, MarketingOther,"strsqlinsert += "InterviewSlot"strsqlinsert += ")"strsqlinsert += " VALUES ("strsqlinsert += "@Surname,@Forenames,@Title,@DOB,@EmailAddress,@Gender,@EmergencyContactName,@EmergencyContactNumber,"strsqlinsert += "@Convictions,@ConvictionList,@NationalIdentity,@NationalIdentityOther,@Ethnicity,@EthnicityOther,@FirstLanguage,@FirstLanguageOther,@PreferredLanguage,@SpeakWelsh,"strsqlinsert += "@HouseNoStreet,@Locality,@Town,@County,@Postcode,@HomeTelephoneNumber,@MobileTelephoneNumber,"strsqlinsert += "@Qualifications,@SchoolCollege1,@From1,@To1,@SchoolCollege2,@From2,@To2,@Employment,"strsqlinsert += "@Disabilities,@MedicalCondition,@SpecialArrangements,"strsqlinsert += "@Marketing,@MarketingOther,"strsqlinsert += "@InterviewSlot"strsqlinsert += ")"strsqlinsert += "; SELECT SCOPE_IDENTITY() ; "
SQL SERVER 2005 Data Insert
Apr 2, 2007Hi,
I have 2 tables. MASTER table as M and TRAN table as T. I need to insert 1 row in table M and with the foreign key need to insert multiple rows in the table T. SQL SERVER used is 2005. Application is in .NET 1.x
I am able to insert one record in the table in M but how do i insert the multiple records in table T?
Help....
Thanks,
Rahul Jha
SQL Server 2005: TRIGGER AFTER INSERT
Mar 22, 2006Hello,I am learning SQL Server 2005.I need to create a trigger which increments number of book'spublications:CREATE TRIGGER InsertPublicationON PublicationsAFTER INSERTASBEGINSET NOCOUNT ON;DECLARE @Num smallintSET @Num = SELECT NumPublications FROM Books WHERE ISBN IN(SELECT ISBN FROM inserted);UPDATE BooksSET NumPublications = @Num + 1WHERE ISBN IN(SELECT ISBN FROM inserted);ENDUnfortunately I receive a message:Incorrect syntax near the keyword 'SELECT'.Could you explain me please how to correct the code?I am new to SQL Server.Thank you very much./RAM/
View 2 Replies View RelatedSQL Server 2005 - BULK INSERT
Sep 4, 2006I'm trying to import data from flat file in table and have fewproblems.1.Field Delimiter is ',' (comma). If ',' occurs in quotedstring it is still treated as field delimiter. This is BUG or ?2.In table I have datetime field that can be null, but bulkinsert reports error if in flat file is null or ''. It's OK only whenreal date is specified.Table:create table AttachmentList (Code integer not null,ClassID integer null,Description varchar(200) null,ValidUntil datetime null,constraint PK_ATTACHMENTLIST primary key (Code))flat file.1,13,'Naputak, CU 261098', ''Thanks in advanceDavor
View 3 Replies View RelatedUsing Bulk Insert With SQL Server 2005
Aug 29, 2006I have a web page that prompts a user to select a csv file. Using a Bulk Insert the data is loaded into a SQL Server 2005 table.
I have been using the Bulk Insert with SQL Server 200 with no problems, but with 2005 I am getting the error "You do not have permission to use the bulk load statement".
My web.config file has the following connection string:
[code]
<add key="connectionString" value="Server=(local);Database=BroadCastOne;trusted_connection=true" />
[/code]
I've given bulkAdmin role to the ASPNET user. It's still not working. What am I doing wrong?
Any help is greatly appreciated,
Ninel
Insert Image Into Table SQL Server 2005
Jun 27, 2007I have a table tblImage with column ImageName as varchar(50) and picture as Image
I am trying to Insert picture I have in C: drive into table using the following code
Insert into tblImage (ImageName, Picture)
Select 'Dog' as ImageName, Bulkcolumn from OPENROWSET(BULK N'C:dog1.jpg', SINGLE_BLOB) as picture
I am getting error message.
Can I insert image into table through query.
Thanks in advance.
How To Break Insert Query In Sql Server 2005 In To Two...
Jan 15, 2008I am inserting a lengthy query through the source code here it contains one big record called description which has 3 paragraph length.....its showing error also.Is there any way to break the query in to two and execute?
View 6 Replies View RelatedIn SQL SERVER 2005, How Can I Get The ID Of The Record I Just Insert To Table?
Feb 12, 2006In SQL SERVER 2005, how can I get the ID of the record I just insert to table?
I defined a table MyTable, and I insert a record into the table using the SQL below
Insert into MyTable (Name) values ("User Name")
You know the field ID is IDENTITY, so it can not be in Insert SQL, and SQL SERVER will pass a value to it automatically.How can I know the ID of the record I just insert to table?
CREATE TABLE [dbo].[MyTable]( [ID] [int] IDENTITY(1,1) NOT NULL, [Name] [nchar](10) NOT NULL,CONSTRAINT [PK_MyTable] PRIMARY KEY CLUSTERED ( [ID] ASC)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]) ON [PRIMARY]
SQL Server 2005, INSERT INTO, Error Message
May 8, 2007The following function I am trying to design is to INSERT data into a SQL Server 2005 database. It is called from a different function, parse_file();, which is looping through a .CSV file and returning each record as an array to recordInsert();. Here is the function code and SQL syntax
PHP Code:
function recordInsert($rs)
{
$host = 'Driver={SQL Server}; SERVER=SERVER; DATABASE=DATABASE';
$user = 'USER';
$pass = 'PASS';
$conn = odbc_connect($host, $user, $pass);
$query = "INSERT INTO db.table VALUES ( {$rs['MODEL']}, {$rs['PID']}, {$rs['YEAR']}, {$rs['TOTAL_COST']},
{$rs['PARTS_COST']}, {$rs['LABOR_COST']}, {$rs['PROBCD']}, {$rs['FAIL_PART']},
{$rs['FAIL_PART_NAME']}, {$rs['MILES']}, {$rs['PROBLEM']}, {$rs['CAUSE']},
{$rs['REMEDY']}, {$rs['CLAIM_DATE']}, {$rs['APPRV_DATE']}, {$rs['FAIL_DATE']},
{$rs['SOLD_DATE']}, {$rs['UNIT_AGE']}, {$rs['DEALER']}, {$rs['DEALER_NAME']},
{$rs['ST']}, {$rs['ZIP']}, {$rs['CLAIM']}, {$rs['BTC']}, {$rs['PART_2']},
{$rs['PART_3']}, {$rs['PART_4']}, {$rs['PART_4']}, {$rs['PART_5']},
{$rs['PART_6']}, {$rs['JOBCD1']}, {$rs['JOBCD2']}, {$rs['JOBCD3']},
{$rs['JOBCD4']}, {$rs['PRLN']}, {$rs['RUN_DATE']} );";
$exec = odbc_exec($conn, $query);
if(!$exec)
{
echo "Error: " . odbc_error($exec) . "<br />
" . odbc_errormsg() . "<br />
";
}
else
{
echo "Executed.<br />
";
}
}
parse_file("file.csv", csv);
I am receiving the following error when attempting to INSERT into the database.
Code:
[Microsoft][ODBC SQL Server Driver][SQL Server]The name "YFM700RVL" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
I have tried googling the error and since it is a long error, it has been hard trying to find an answer. One solution I found (which wasn't a solution) was to add the '@' infront of the variables. It did not work.
Kick in the right direction?
Thanks.
Is It Possible To Insert JSON Data To SQL Server 2005
Dec 3, 2007
Hi,
Is it possible to insert JSON data to SQL Server 2005 directly using stored procedure?
Somthing like for XML we are using sp_xml_preparedocument and openxml. For JSON ???
Thanks,
Insert Values Into Both Table At The Same Time Using Sql Server 2005
Nov 26, 2007hi all,
In sql server 2005 i had created 2 tables,table 1 and table 2. Here is the detail of the table.
table 1:
tid--> int,identity,primary key
tname-->varchar(200)
table 2:
sid-->int,identity,primary key
tid-->fk (this tid is set as foreign key for the tid in table1)
now when i'm inserting values into tname i have to insert the value of tid from table 1 into the tid of table 2 both at the same time. any one know how this is possible? if so please send me the code..
pls help me..
thanks
swapna
How To Insert More Number Of Rows Into Sql Server 2005 Database At Once.
Apr 14, 2008Hi,
Good morning to all.My table: User_Group_Map(UserID UNIQUEIDENTIFIER,GroupID UNIQUEIDENTIFIER)
Now, I want to write one stored procedure that can insert rows into the above table, but more number of rows at-once.
Means, the program should allow multiple insertions without the need to call the stored procedure from front-end more number of times.
Can anyone please help me on this...
Thanks in advance...Ashok kumar.
MS SQL SERVER 2005 BUG?? Cannot Insert NULL Into Column Diagram_id
Jun 4, 2006Hi friends,
when trying to save a diagram I got an error:
The sp_creatediagram procedure attempted to return a status of NULL, which is not allowed.
Whats with this????
Queue Insert Statement What Is The Best SQL Server 2005 Feature To Use?
Apr 4, 2007Hello everybody, I'm not completly aware of the SQL server 2005 possibilities so I'd need an hints from somebody with a wide knowledge to understand the direction to take!
This is what I have to do.
I insert into a table XML message. the messages are pushed automatically by an application I have no ""control" on and I get several messages "at the same time".
Everytime the message is inserted into the database I need to trasform the XML data into the correspondent relational value and I know already that in some cases it could take a while (1 second can be considered a while..)
My worry is that in the moment I process one message I loose the other one inserted after ,,,
There is some tool that helps me to handte the process as I would..
I was looking into SQL service broker?
It can be the right choice?
Thank you for any help!!
Marina B.
Not Able To Insert Record In SQL Server 2005 Express Edition
Jul 29, 2006Hello,
In a web application of VS.Net 2005 I am able to insert records in both the database SQL 2000 & 2005
In a windows application of VS.Net 2005 I am able to insert record in SQl 2000 but I am not able to insert record in SQL 2005 Express Edition.
Please help Me I tried very Much but not succeded yet.
Thanks in Advance
Insert Date Values From SQL Server 2005 To ORacle 10g
Nov 21, 2006I am trying to insert records with a datetime field type from a SQL Server to an Oracle table using SSIS.
Any suggestions to get it to work?
How To Apply SQL Server 2005 Express SP1 To The Version Of SQL Server 2005 Express Which Installs With Visual Studio 2005?
Aug 8, 2006When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
Best Way To Insert Large Amounts Of Data From A Webform To SQL Server 2005
Oct 21, 2007HiI have a VB.net web page which generates a datatable of values (3 columns and on average about 1000-3000 rows).What is the best way to get this data table into an SQL Server? I can create a table on SQL Server no problem but I've found simply looping through the datatable and doing 1000-3000 insert statements is slow (a few seconds). I'd like to make this as streamlined as possible so was wondering is there is a native way to insert all records in a batch via ADO.net or something.Any ideas?ThanksEd
View 1 Replies View RelatedHowto Insert A Null DateTime Into A Sql Server 2005 Database
Apr 2, 2008I'm importing data form an Excel file to a Sql Server Database. Some of the data imported represents time as a double type so i convert the times into DateTime to be inserted into the database. The time values that aren't available in the Excel file are 0.. so what i want to do is insert null into the database for all the values that are 0 in the excel file... How do i do that based on this code i have so far:protected void ButtonImport_Click(object sender, EventArgs e){PanelUpload.Visible = false;PanelView.Visible = false;PanelImport.Visible = true;LabelImport.Text = "";OleDbCommand objCommand = new OleDbCommand();objCommand = ExcelConnection(); OleDbDataReader reader;reader = objCommand.ExecuteReader(); while (reader.Read()){DateTime? in_1 = null;DateTime? out_1 = null;DateTime? in_2 = null;DateTime? out_2 = null; int emp_id = Convert.ToInt32(reader["emp_id"]);DateTime date_entry = Convert.ToDateTime(reader["date_entry"]);if (Convert.ToDouble(reader["in_1"]) != 0)in_1 = ConvertDoubleToDateTime((double)reader["in_1"]);if (Convert.ToDouble(reader["out_1"]) != 0)out_1 = ConvertDoubleToDateTime((double)reader["out_1"]);if (Convert.ToDouble(reader["in_2"]) != 0)in_2 = ConvertDoubleToDateTime((double)reader["in_2"]);if (Convert.ToDouble(reader["out_2"]) != 0)out_2 = ConvertDoubleToDateTime((double)reader["out_2"]); ImportIntoAttendance(emp_id, date_entry, in_1, out_1, in_2, out_2);} reader.Close();}protected void ImportIntoAttendance(int emp_id, DateTime date_entry, DateTime? in_1, DateTime? out_1, DateTime? in_2, DateTime? out_2){ SqlDataSource AttendanceDataSource = new SqlDataSource();AttendanceDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["SalariesConnectionString1"].ToString();AttendanceDataSource.InsertCommandType = SqlDataSourceCommandType.Text;AttendanceDataSource.InsertCommand = "INSERT INTO Attendance (emp_id, date_entry, in_1, out_1, in_2, out_2) " +"VALUES ('" + emp_id + "', '" + date_entry + "', '" + in_1 + "', '" + out_1 + "', " +"'" + in_2 + "', '" + out_2 + "')"; int rowsAffected = 0;try{rowsAffected = AttendanceDataSource.Insert();}catch(Exception ex){LabelImport.Text += "<font color=red>" + ex + "</font><br />";} }private DateTime ConvertDoubleToDateTime(double dbTime){string[] SplitTime = dbTime.ToString().Split('.');string hours = SplitTime[0];string minutes = String.Empty;string time = String.Empty; if (dbTime.ToString().IndexOf('.') != -1){if (SplitTime[1].Length >= 1){if (SplitTime[1].Length == 1)minutes = Convert.ToString(Convert.ToDouble(SplitTime[1]) * 10);else if (SplitTime[1].Length > 1)minutes = SplitTime[1];}}elseminutes = "00";time = hours + ":" + minutes;return Convert.ToDateTime(time);}
View 3 Replies View RelatedInsert Statement For Junction Table On Many To Many Relationship Ms Sql Server 2005
Oct 10, 2007Hello,
This seems like such a simple problem but I am new developer even through I have been on the administration end of things for some time. I will go into more detail about my tables and there relationships below. Anyway, I am trying to create a many-to-many relationship within ms sql server 2005. I have created both of my primary tables and also a junction table per the directions on microsoft's website all per ms's instructions as stated here...
http://msdn2.microsoft.com/en-us/library/ms178043.aspx
At then end of these instruction it states as a NOTE: The creation of a junction table in a database diagram does not insert data from the related tables into the junction table. For information about inserting data into a table, see How to: Create Insert Results Queries (Visual Database Tools).
http://msdn2.microsoft.com/en-us/library/ms189098.aspx
and these directions do not go into detail on how to do an insert on a junction table. And I cant find out how to do this anywhere on the internet... I did create a T-SQL INSERT statement in a trigger as listed below but I end up getting an error AS LISTED BELOW....
Here is how I set everything up...
PetitionSet table consists of:
PetitionSetID int auto-increment primary key
PetitionSetName varchar(50) no nulls
PetitionSetScope varchar(50) no nulls
the Petition table consists of:
PetitionID int auto-increment primary key
PetitionSetID int no nulls
PetitionName varchar(50) no nulls
the SetToPetitionJunction table consists of:
PetitionSetID int
PetitionID int
And, there is a composite key made up of both the PetitionSetID and PetitionID fields.
I have created the foreign key relationships with DEFAULT VALUES from the SetToPetitionJunction table to each column's respective corresponding column in each of the tables: PetitionSet and Petition.
The trigger is on the Petition table and it has the following code:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: Name
-- Create date:
-- Description:
-- =============================================
ALTER TRIGGER .[SetToPetitionJunctionTrigger]
ON .[dbo].[Petition]
AFTER INSERT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
INSERT INTO SetToPetitionJunction
(PetitionID, PetitionSetID)
SELECT Petition.PetitionID, PetitionSet.PetitionSetID
FROM Petition INNER JOIN
PetitionSet ON Petition.PetitionSetID = PetitionSet.PetitionSetID
END
I have created an asp.net 2.0 front end to insert values into the PetitionSet table and the Petition Table. And in the detailsview for the Petition table I manually insert the PetitionSetID field to the number that corresponds to an auto-generated number on the primary key of the PetitionSet table. So I am maintaining referential integrity...
The first time it works and inserts one record in the Junction table containing the PetitionSetID from the PetitionSet table and the PetitionID from the petition table.
Then when I try to add in another petition for the same petition set number just like I did the first time and then I get this error...
Violation of PRIMARY KEY constraint 'PK_SetToPetitionJunction'. Cannot insert duplicate key in object 'dbo.SetToPetitionJunction'.
The statement has been terminated.
David
All Rights Reserved in All Media
INSERT INTO OPENROWSET Does Not Respect ORDER BY Clause On SQL Server 2005 EE
Jul 3, 2007Hi,
I need to pass data from a SQL Server data base to an Access data base. To do this I use the OPENROWSET as followed:
FR
INSERT INTO OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'C:Aux.mdb'; 'Admin'; '',Test) (Id, Name, TypeId) SELECT Id,Name,TypeId
FROM Test
ORDER BY TypeId
FR
On SQL Server 2000 or MSDE the data is transfered as expected, respecting the specified order. But when I run the same clause on a SQL 2005 EE the data is transfered, but the order is not respected.
So my question is if I have to activate an option for the order to be respected or if this is a bug.
Best regards,
Ângelo Vilela
SQL Server 2005 JDBC Driver - GetParameterMetaData() For 'INSERT ... INTO' Statement
Aug 15, 2006I use the Microsoft SQL Server 2005 JDBC Driver (1.0.809.102 and 1.1.1320.0) to connect to a SQL Server 2005 database. I'm currently implementing a generic data access layer that executes an arbitrary SQL statement:
public void prepareQuery(String sql) throws SQLException, ClassNotFoundException {
PreparedStatement stm = getConnection().prepareStatement(sql);
ParameterMetaData pmd = stm.getParameterMetaData();
int numPar = pmd.getParameterCount();
System.out.println("Number of parameters: " + numPar);
// ... acquire and process 'numPar' parameters ...
}
Exemplarily, I created a table named 'TEST_TABLE' with three Integer columns ('C1', 'C2' and 'C3') and a Varchar column ('C4'). Calling
prepareQuery("INSERT INTO [TEST_TABLE] ( [C1], [C2], [C3], [C4] ) VALUES ( 1, 2, ?, ? )")
gives the following result:
Number of parameters: 4
This is definitely wrong because that statement has only two parameters, one of type Integer and one of type Varchar. How can I get the correct number and types of the parameters?
BULK INSERT Format File Problems With SQLNUMERICAL In SQL-Server 2005 Express
May 24, 2006I'm trying to set up a BULK INSERT Format File for some data that I've been sent, which, according to the data documentation, comes in fixed-width format fields (no delimiters except for end-of-row 0D0A) in SQL-Server 2005 Express.
The following is the first line...
"7999163 09182003 56586 56477 3601942 1278 22139 1102 113 118 51450 1 1 63535647 10000
7999162 09182003 56586 56477 3601942 1279 22139 1102 113 118 51450 1 1 63535647 10000 "
Looking with a hex editor, all the above whitespace are 20's.
From the documentation, I've constructed the following table...
CREATE TABLE MQIC.DBO.ORDER_F
(
TRACER_ID NUMERIC (10,0),
DB_CREATE_DATE CHAR (8),
DB_UPDATED_DATE CHAR (8),
CREATE_DATE_KEY NUMERIC (10,0),
ORDER_DATE_KEY NUMERIC (10,0),
PATIENT_KEY NUMERIC (10,0),
ORDER_KEY NUMERIC (10,0),
PROVIDER_KEY NUMERIC (10,0),
LOCATION_KEY NUMERIC (10,0),
ORDER_TYPE_KEY NUMERIC (10,0),
STATUS_KEY NUMERIC (10,0),
PRIMARY_INSURANCE_KEY NUMERIC (10,0),
EXISTENCE NUMERIC (1,0),
DURATION NUMERIC (4,0),
NUMBER_OF_VISITS NUMERIC (3,0),
ACTIVITY_TRACER_ID NUMERIC (10,0),
AGE_KEY NUMERIC (10,0)
)
To Bulk Insert this, I've written the following...
BULK INSERT MQIC.DBO.ORDER_F
FROM 'E:MDataOrder_F.txt'
WITH
(
FORMATFILE = 'E:MDataOrder_F_format.txt'
)
and written the following format file...
9.0
17
1 SQLNUMERIC 0 10 "" 1 TRACER_ID ""
2 SQLCHAR 0 8 "" 2 DB_CREATE_DATE ""
3 SQLCHAR 0 8 "" 3 DB_UPDATED_DATE ""
4 SQLNUMERIC 0 10 "" 4 CREATE_DATE_KEY ""
5 SQLNUMERIC 0 10 "" 5 ORDER_DATE_KEY ""
6 SQLNUMERIC 0 10 "" 6 PATIENT_KEY ""
7 SQLNUMERIC 0 10 "" 7 ORDER_KEY ""
8 SQLNUMERIC 0 10 "" 8 PROVIDER_KEY ""
9 SQLNUMERIC 0 10 "" 9 LOCATION_KEY ""
10 SQLNUMERIC 0 10 "" 10 ORDER_TYPE_KEY ""
11 SQLNUMERIC 0 10 "" 11 STATUS_KEY ""
12 SQLNUMERIC 0 10 "" 12 PRIMARY_INSURANCE_KEY ""
13 SQLNUMERIC 0 1 "" 13 EXISTENCE ""
14 SQLNUMERIC 0 4 "" 14 DURATION ""
15 SQLNUMERIC 0 3 "" 15 NUMBER_OF_VISITS ""
16 SQLNUMERIC 0 10 "" 16 ACTIVITY_TRACER_ID ""
17 SQLNUMERIC 0 10 "
" 17 AGE_KEY ""
However... actually running this gives the following error...
Msg 4863, Level 16, State 4, Line 1
Bulk load data conversion error (truncation) for row 1, column 13 (EXISTENCE).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Since this is my first time with this, I read the BOL items on Bulk Insert, Format Files, and each of the formatting attibutes, and made up two line "toy" examples for SQLCHAR and SQLINT, including two columns - all worked as expected.
It seemed that only SQLNUMERIC/SQLDECIMAL fell apart.
Even the following trivial example doesn't work for this field of data...
"7999163 "
CREATE TABLE MQIC.DBO.ORDER_F
(
TRACER_ID NUMERIC (10,0)
)
and
9.0
1
1 SQLNUMERIC 0 10 " " 1 TRACER_ID ""
or
9.0
1
1 SQLNUMERIC 0 10 "" 1 TRACER_ID ""
which give this error...
Msg 9803, Level 16, State 1, Line 1
Invalid data for type "numeric".
The statement has been terminated.
or
9.0
1
1 SQLNUMERIC 0 10 "/r/n" 1 TRACER_ID ""
which gives this error...
Msg 4832, Level 16, State 1, Line 1
Bulk load: An unexpected end of file was encountered in the data file.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Also - there was the DB_CREATE_DATE and DB_UPDATED_DATE CHAR (8) were supposed to be dates in the format of mmddyyy but clearly there is no Date datatype in SQL-Server. I would suppose these need to be converted, but am unsure how. What is clear is that the data was dumped from Oracle in text form,
Any thoughts on this would be greatly appreciated...
Thanks!
BULK INSERT Format File Problems With SQLNUMERICAL In SQL-Server 2005 Express
May 24, 2006I'm trying to set up a BULK INSERT Format File for some data that I've been sent, which, according to the data documentation, comes in fixed-width format fields (no delimiters except for end-of-row 0D0A) in SQL-Server 2005 Express.
The following is the first line...
"7999163 09182003 56586 56477 3601942 1278 22139 1102 113 118 51450 1 1 63535647 10000
7999162 09182003 56586 56477 3601942 1279 22139 1102 113 118 51450 1 1 63535647 10000 "
Looking with a hex editor, all the above whitespace are 20's.
From the documentation, I've constructed the following table...
CREATE TABLE MQIC.DBO.ORDER_F
(
TRACER_ID NUMERIC (10,0),
DB_CREATE_DATE CHAR (8),
DB_UPDATED_DATE CHAR (8),
CREATE_DATE_KEY NUMERIC (10,0),
ORDER_DATE_KEY NUMERIC (10,0),
PATIENT_KEY NUMERIC (10,0),
ORDER_KEY NUMERIC (10,0),
PROVIDER_KEY NUMERIC (10,0),
LOCATION_KEY NUMERIC (10,0),
ORDER_TYPE_KEY NUMERIC (10,0),
STATUS_KEY NUMERIC (10,0),
PRIMARY_INSURANCE_KEY NUMERIC (10,0),
EXISTENCE NUMERIC (1,0),
DURATION NUMERIC (4,0),
NUMBER_OF_VISITS NUMERIC (3,0),
ACTIVITY_TRACER_ID NUMERIC (10,0),
AGE_KEY NUMERIC (10,0)
)
To Bulk Insert this, I've written the following...
BULK INSERT MQIC.DBO.ORDER_F
FROM 'E:MDataOrder_F.txt'
WITH
(
FORMATFILE = 'E:MDataOrder_F_format.txt'
)
and written the following format file...
9.0
17
1 SQLNUMERIC 0 10 "" 1 TRACER_ID ""
2 SQLCHAR 0 8 "" 2 DB_CREATE_DATE ""
3 SQLCHAR 0 8 "" 3 DB_UPDATED_DATE ""
4 SQLNUMERIC 0 10 "" 4 CREATE_DATE_KEY ""
5 SQLNUMERIC 0 10 "" 5 ORDER_DATE_KEY ""
6 SQLNUMERIC 0 10 "" 6 PATIENT_KEY ""
7 SQLNUMERIC 0 10 "" 7 ORDER_KEY ""
8 SQLNUMERIC 0 10 "" 8 PROVIDER_KEY ""
9 SQLNUMERIC 0 10 "" 9 LOCATION_KEY ""
10 SQLNUMERIC 0 10 "" 10 ORDER_TYPE_KEY ""
11 SQLNUMERIC 0 10 "" 11 STATUS_KEY ""
12 SQLNUMERIC 0 10 "" 12 PRIMARY_INSURANCE_KEY ""
13 SQLNUMERIC 0 1 "" 13 EXISTENCE ""
14 SQLNUMERIC 0 4 "" 14 DURATION ""
15 SQLNUMERIC 0 3 "" 15 NUMBER_OF_VISITS ""
16 SQLNUMERIC 0 10 "" 16 ACTIVITY_TRACER_ID ""
17 SQLNUMERIC 0 10 "
" 17 AGE_KEY ""
However... actually running this gives the following error...
Msg 4863, Level 16, State 4, Line 1
Bulk load data conversion error (truncation) for row 1, column 13 (EXISTENCE).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Since this is my first time with this, I read the BOL items on Bulk Insert, Format Files, and each of the formatting attibutes, and made up two line "toy" examples for SQLCHAR and SQLINT, including two columns - all worked as expected.
It seemed that only SQLNUMERIC/SQLDECIMAL fell apart.
Even the following trivial example doesn't work for this field of data...
"7999163 "
CREATE TABLE MQIC.DBO.ORDER_F
(
TRACER_ID NUMERIC (10,0)
)
and
9.0
1
1 SQLNUMERIC 0 10 " " 1 TRACER_ID ""
or
9.0
1
1 SQLNUMERIC 0 10 "" 1 TRACER_ID ""
which give this error...
Msg 9803, Level 16, State 1, Line 1
Invalid data for type "numeric".
The statement has been terminated.
or
9.0
1
1 SQLNUMERIC 0 10 "/r/n" 1 TRACER_ID ""
which gives this error...
Msg 4832, Level 16, State 1, Line 1
Bulk load: An unexpected end of file was encountered in the data file.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Also - the DB_CREATE_DATE and DB_UPDATED_DATE CHAR (8) were supposed to be dates in the format of mmddyyy but clearly there is no Date datatype in SQL-Server. I would suppose these need to be converted, but am unsure how. What is clear is that the data was dumped from Oracle in text form,
Any thoughts on this would be greatly appreciated...
Thanks!
BULK INSERT Format File Problems With SQLNUMERICAL In SQL-Server 2005 Express
May 24, 2006I'm trying to set up a BULK INSERT Format File for some data that I've been sent, which, according to the data documentation, comes in fixed-width format fields (no delimiters except for end-of-row 0D0A) in SQL-Server 2005 Express.
The following is the first line...
"7999163 09182003 56586 56477 3601942 1278 22139 1102 113 118 51450 1 1 63535647 10000
7999162 09182003 56586 56477 3601942 1279 22139 1102 113 118 51450 1 1 63535647 10000 "
Looking with a hex editor, all the above whitespace are 20's.
From the documentation, I've constructed the following table...
CREATE TABLE MQIC.DBO.ORDER_F
(
TRACER_ID NUMERIC (10,0),
DB_CREATE_DATE CHAR (8),
DB_UPDATED_DATE CHAR (8),
CREATE_DATE_KEY NUMERIC (10,0),
ORDER_DATE_KEY NUMERIC (10,0),
PATIENT_KEY NUMERIC (10,0),
ORDER_KEY NUMERIC (10,0),
PROVIDER_KEY NUMERIC (10,0),
LOCATION_KEY NUMERIC (10,0),
ORDER_TYPE_KEY NUMERIC (10,0),
STATUS_KEY NUMERIC (10,0),
PRIMARY_INSURANCE_KEY NUMERIC (10,0),
EXISTENCE NUMERIC (1,0),
DURATION NUMERIC (4,0),
NUMBER_OF_VISITS NUMERIC (3,0),
ACTIVITY_TRACER_ID NUMERIC (10,0),
AGE_KEY NUMERIC (10,0)
)
To Bulk Insert this, I've written the following...
BULK INSERT MQIC.DBO.ORDER_F
FROM 'E:MDataOrder_F.txt'
WITH
(
FORMATFILE = 'E:MDataOrder_F_format.txt'
)
and written the following format file...
9.0
17
1 SQLNUMERIC 0 10 "" 1 TRACER_ID ""
2 SQLCHAR 0 8 "" 2 DB_CREATE_DATE ""
3 SQLCHAR 0 8 "" 3 DB_UPDATED_DATE ""
4 SQLNUMERIC 0 10 "" 4 CREATE_DATE_KEY ""
5 SQLNUMERIC 0 10 "" 5 ORDER_DATE_KEY ""
6 SQLNUMERIC 0 10 "" 6 PATIENT_KEY ""
7 SQLNUMERIC 0 10 "" 7 ORDER_KEY ""
8 SQLNUMERIC 0 10 "" 8 PROVIDER_KEY ""
9 SQLNUMERIC 0 10 "" 9 LOCATION_KEY ""
10 SQLNUMERIC 0 10 "" 10 ORDER_TYPE_KEY ""
11 SQLNUMERIC 0 10 "" 11 STATUS_KEY ""
12 SQLNUMERIC 0 10 "" 12 PRIMARY_INSURANCE_KEY ""
13 SQLNUMERIC 0 1 "" 13 EXISTENCE ""
14 SQLNUMERIC 0 4 "" 14 DURATION ""
15 SQLNUMERIC 0 3 "" 15 NUMBER_OF_VISITS ""
16 SQLNUMERIC 0 10 "" 16 ACTIVITY_TRACER_ID ""
17 SQLNUMERIC 0 10 "
" 17 AGE_KEY ""
However... actually running this gives the following error...
Msg 4863, Level 16, State 4, Line 1
Bulk load data conversion error (truncation) for row 1, column 13 (EXISTENCE).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Since this is my first time with this, I read the BOL items on Bulk Insert, Format Files, and each of the formatting attibutes, and made up two line "toy" examples for SQLCHAR and SQLINT, including two columns - all worked as expected.
It seemed that only SQLNUMERIC/SQLDECIMAL fell apart.
Even the following trivial example doesn't work for this field of data...
"7999163 "
CREATE TABLE MQIC.DBO.ORDER_F
(
TRACER_ID NUMERIC (10,0)
)
and
9.0
1
1 SQLNUMERIC 0 10 " " 1 TRACER_ID ""
or
9.0
1
1 SQLNUMERIC 0 10 "" 1 TRACER_ID ""
which give this error...
Msg 9803, Level 16, State 1, Line 1
Invalid data for type "numeric".
The statement has been terminated.
or
9.0
1
1 SQLNUMERIC 0 10 "/r/n" 1 TRACER_ID ""
which gives this error...
Msg 4832, Level 16, State 1, Line 1
Bulk load: An unexpected end of file was encountered in the data file.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Also - the DB_CREATE_DATE and DB_UPDATED_DATE CHAR (8) were supposed to be dates in the format of mmddyyy but clearly there is no Date datatype in SQL-Server. I would suppose these need to be converted, but am unsure how. What is clear is that the data was dumped from Oracle in text form,
Any thoughts on this would be greatly appreciated...
Thanks!
Transact SQL :: Passing C++ / C# Array To INSERT Command
Aug 13, 2015I have to send an array, which are generated in C++ (or C#) to an SQL-INSERT. Something like this:
INSERT INTO Table1
(Col1,Col2)
VALUES(:a,:b)
// a and b are my arrays//:a=A,B,C,D.....//:b=1,2,3,...
Is there any way to do something like my prototype in MS SQL Server? If yes how should be my INSERT?Â
SQL Server 2005 Developer's Version Installation Problem -- No SQL Server 2005 Studio Manager Gets Installed.
Sep 3, 2007I installed Visual Studio 2005 Professional then after that was installed and running, I tried to install the the SQL Server 2005 Developer's Edition which installed but I do not get the SQL Server 2005 Studio Manager. I have remove and reinstalled but it never gets installed. Any ideas?
Chuck
Sql Server 2005 Compact Edition 3.1 RDA Synchronization Fails On Table With Index In Sql Server 2005 Database
Jan 21, 2008We have been using Sql Server 2005 Compact Edition 3.1 RDA synchronization method successfully on Sql Server 2000 database. Recently we moved the database to Sql Server 2005, sync doesn't work anymore, it just hangs on one table. On further investigation, we found out that it's the index on that table that causes this. We removed the index, it works fine. We are wondering the root cause, removing the index is not a solution for us. Any thoughts?. Thanks.
View 1 Replies View Related