How investigate type of a connection to DB( MS SQL or Oracle) during execution of a packet?
In the time of executon of packet I must determine type of connection? What do good practices exists?
Thanks In Advance.
We are looking at installing a new Oracle server for a client but have been told that they have used Oracle in the past but had a lot of problems with slow response even though the bandwidth on the WAN was barely being used. He says that this was due to the fact that Oracle sends out very small packets across the network meaning that there are hundreds of packets being sent out. This caused a problem on the routers being used as it was killing the processors. Is this still the case and have you had other reports of slow response of this nature?
View 1 Replies View RelatedHello,
While doing performance testing on a Tomcat based web application using the v1.1 JDBC driver connecting to SQL Server 2005, the tomcat server has been throwing the above exception at a fairly low rate. I have seen some related issues in the forums with v1.1 of the MS JDBC driver, but those were asking about connection reset related errors. In this case the 'invalid packet header' exception is consistently seen. I am in the process of repeating the test with some additional application side logging turned on, and have tried enabling FINEST level logging for the driver, but that leaves me with a 500MB log file and so far no instances of that exception in question being thrown. This is not unusual, the error has only been seen about 14 times in about 20 tests, with each test running about an hour and a half.
A few quick tests with the 1.2 driver did not throw this exception, but did throw a high number of '[Connection|Statement|Resultset] Closed'
While I gather more information, I was wondering if there is anything significant in this particular exception type that could point to a more specific set of tests I could run?
The exceptions seen so far:
Exception #1:
java.lang.NullPointerException
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at
com.microsoft.sqlserver.jdbc.SQLServerStatement.doCloseServerCursor(Unknown
Source)
at
com.microsoft.sqlserver.jdbc.SQLServerStatement$CloseServerCursorRequest.execute(Unknown
Source)
at
com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at
com.microsoft.sqlserver.jdbc.SQLServerStatement.closeServerCursor(Unknown
Source)
at com.microsoft.sqlserver.jdbc.SQLServerResultSet.close(Unknown
Source)
at com.X.db.CSInternalDB.close(CSInternalDB.java:950)
at com.X.db.CSQuery.close(CSQuery.java:169)
at
com.X.container.ContainerManager.getFolderContent(ContainerManager.java:1313)
at
com.X.container.ContainerCommands.getContent(ContainerCommands.java:1086)
at
com.X.container.ContainerCommands.execCommand(ContainerCommands.java:192)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.BaseHandler.processDOM(BaseHandler.java:284)
at com.X.Dispatcher.execIt(Dispatcher.java:546)
at com.X.Dispatcher.execCommand(Dispatcher.java:333)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.X.execute(X.java:600)
at com.X.HttpReceiver.doRequest(HttpReceiver.java:275)
at com.X.HttpReceiver.doGet(HttpReceiver.java:181)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at
org.apache.catalina.cluster.tcp.ReplicationValve.invoke(ReplicationValve.java:346)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)
#2:
java.sql.SQLException: The DBComms.receive operation resulted in an invalid
packet header type:-86. PktNum:0. nReceived:8.
at
com.X.db.CSPreparedStatement.executeQuery(CSPreparedStatement.java:474)
at com.X.db.CSAnalyzer.executeQuery(CSAnalyzer.java:485)
at com.X.db.CSQuery.sqlPrepareExecute(CSQuery.java:559)
at
com.X.form.FormManager.getInternalFormProps(FormManager.java:1803)
at
com.X.form.FormManager.getInternalFormProps(FormManager.java:1762)
at
com.X.route.RoutingCommands.genericPrepareRoutingPage(RoutingCommands.java:5618)
at
com.X.route.RoutingCommands.prepareRoutingPage(RoutingCommands.java:3899)
at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
com.X.iplugin.DynamicCommandMethod.execute(DynamicCommandMethod.java:35)
at
com.X.route.RoutingCommands.execCommand(RoutingCommands.java:209)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.BaseHandler.processDOM(BaseHandler.java:284)
at com.X.Dispatcher.execIt(Dispatcher.java:546)
at com.X.Dispatcher.execCommand(Dispatcher.java:333)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.X.execute(X.java:600)
at com.X.HttpReceiver.doRequest(HttpReceiver.java:275)
at com.X.HttpReceiver.doGet(HttpReceiver.java:181)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at
org.apache.catalina.cluster.tcp.ReplicationValve.invoke(ReplicationValve.java:346)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)
On one of the workstations being used by a developer we see the following entries in the event log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17828
Date: 17/12/2007
Time: 10:24:25
User: N/A
Computer: <removed>
Description:
The prelogin packet used to open the connection is structurally invalid; the connection has been closed. Please contact the vendor of the client library. [CLIENT: <local machine>]
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
<removed>
Searching on the internet we don't get a satisfying answer. This connection to the database is made through a .NET web service using the default client libraries from the Base Class Library. We are talking about a fully patched SQL Server 2005 Developer Edition and .NET Framework 3.5.
Any clues?
I only found the following "relevant" link:
http://www.webservertalk.com/message1539518.html
But I am the kind of guy that likes to know what went or goes wrong instead of trying out hacks like the one described in the above link.
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
Greetings,
I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:
Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.
Thanks,
BCB
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Hi,
I need to get recordset returned by oracle sp in execute sql task to process futher in For Each Loop container and on same lines i want to use oracle sp for extraction data in Data Flow Task. Could anybody suggest if it how we could do it in SSIS?
All suggestions will be highly appreciated.
Thanks,
Lalit
I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
I have created a DTS package that pulls data in from Oracle into SQLServer. When I run it directly on the server (from EnterpriseManager), it works fine. When I run it from Enterprise Manager on aclient machine that does not have the Oracle client software, it doesnot run, giving me the error: "The Oracle client and networkingcomponents were not found...". I was hoping I wouldn't need to havethe client software installed on a machine other than the server whereSql Server is running. The problem here is that there are a number ofmachines from where I would like to execute this DTS package that I donot want to install/configure the Oracle client software. I don'tquite understand why the configuration of the client is importanthere. In my mind, when I am using enterprise manager from a clientmachine, I am using it sort of like a terminal services client toconnect to the server. I guess there is a lot more happening in thebackground.Thanks for any feedback,Marcus
View 2 Replies View RelatedIn Oracle you can declare like this
DECLARE v_EMPRecord EMP%TYPE;
which is ColumnName%TYPE or I think it's %ROWTYPE, may be both.
Makes life easy for Stored procedure developer
Do you know any thing same we have in SQL Server 2005, should be?
Hi Champs,
Scenario Configuration : VB.net 2005 Code, WebService for Executing SSIS on Server, SSIS deployed on the Database Server
Problem Description : We are developing windows applicaiton in which we call webservice which was deployed on the same server where SSIS packages are deployed.
Now from Code we are passing FilePath name in variable and execute the Package. But the SSis result says that
The file name "\computernamefol1fol2fol3fol4abc.txt" specified in the connection was not valid.
More Information:
1. Full Permission are given on this network folder.
2. Package executes successfully from SSIS development solution (BIS solution)
3. Deployed packed executes successfully from the Database Server.
4. From Development pc packege executes successfully.
5. Other packages deployed on the same server executed suucessfully with same configuration and scenario.
Only this package is not executing.
-- the only differece with this package with other is -
using ".txt" extension in Flat file connection and using VB Script task
Can any one suggest the appropirate solution for this problem...
Thanks
Tarang Pandya
I have SS on 64bit trying to do a lookup to an Oracle 10G db - I'm reading from a SS table and using a column to be part of the 'where' clause on my lookup against a table in oracle - I get Data Type mismatch even though both columns are strings (the input SS column is mapped to a string Derived column which is then mapped to the lookup). If I run on a 32bit machine it works fine. I have a task that can successfully update the Oracle DB table (on 64bit), I just can't get the lookup to work on 64 bit.
Anyone else seen this?
Thanks
My OLDB data source in the Lookup Transformation is not converting
When I try to join the colunms it claims the data types do not match the only differnece is the percision.??
ORACLE
select CAST(group_id AS NUMBER(18)) group_id from blah blah table
SSIS data type = [DT_NUMERIC], Percision = 38
SQL Sever data source
SELECT
CAST(PRINCIPAL_ID as numeric) GROUP_ID,
SSIS data type = [DT_NUMERIC], Percision = 18
OK I migrated a DTS package from MS SQL 2000 to MS SQL 2005 64-bit SSIS. OK so I fixed a problem with a Double Global Variable... Now I am stuck at a connection to Oracle and it returning data... Here is the error message:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "Remedy_Count": "Unsupported data type on result set binding 0.".
My SQL Statement is this:
SELECT COUNT(*) AS Expr1
FROM DB.MYTABLE
When I run it from the Query Builder it returned this:
EXPR1 = 2983
Here are some details from the General Page on the Execute SQL Task
ResultSet - Single row
ConnectionType - OLE DB
Connection - Oracle Provider for OLE DB
SQLSourceType - Direct input
BypassPrepare - True
In the Result Set I have The following:
Result Name - Variable Name
0 - Remedy_Count
So... what can I do to fix this. I have the Remedy_Count set as a:
EvaluateAsExpression - False
Value - 2414
ValueType - Double
I have tried setting the ValueType to Object and other things... Same error... I read some where about how SSIS has issues when Oracle returns a Numeric type data. Can someone help me with this? Anything you all can tell me would be great.
In the custome source Component
At the Runtime execution, Accquire Connection is getting called 3 times, why does that happen so many times, is there any way possible to restrict it to once?
thanks in advance
In SQL Server I've created a linked server to an Oracle database. I am trying to insert (within the context of an sql server table trigger) an SQL Server datetime to an Oracle column with similar precision. Oracle timestamps are not compatible with sql server datetimes and I don't know how to convert the data (or if I should use a different type of column to store the data in Oracle). I have full control over the structure of the Oracle table so I can use a different type if timestamp is not best, but I need the destination column to have at least the same precision as the sql server datetime value. What is the easiest way to do this?
View 22 Replies View RelatedI need a way to connect to an Oracle database and pull the information from that database into a Sql Server Database. An Oracle gateway is not an option.
Is there a way to set up an odbc connection to connect to the database or is there another way to connect?
Thank you,
Anita Ossowski
I've created a SQL stored procedure and would like to connect to an Oracle database & query results within the procedure. Is this possible?
View 1 Replies View RelatedI am moving dta afrom an Oracle source to SQL serevr 2005 using SSIS
Used: Provider: Microsoft OLE DDDB provider for Oracle and typed in Server and username with password.
When executed the package with defaul settimngs( Package ProtectionLevel: EncrptSensitiveWith userkey OR DONTSAVESENSITIVE, EncrptAllwithPassword) and Isolationlevel: serializable/ read comitted) the package responded fine.
When I try to do 'Package Configuration' and type in password in config file the package doesn't responds. it gives following error.
TITLE: Microsoft Visual Studio
------------------------------
Error at Package2 [Connection manager "DEV04.XYZ"]: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error at Data Flow Task [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "DEV04.XYZ" failed with error code 0xC0202009.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
I also get this error:
Executed as user: XYZUHSQLServer. ...042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:01:42 PM Error: 2008-05-19 13:01:43.22 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-05-19 13:01:43.96 Code: 0xC0202009 Source:ExtAWMData Connection manager "XYZ ABC" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E4D Description: "ORA-01017: invalid username/password; logon denied ". End Error Error: 2008-05-19 13:01:43.96 Code: 0xC020801C... The package execution fa... The step failed.
Please advice on
1) Selection of provider for Oracle connection
2) ProtectionLevel
3) Isolation Level
4) Package configuration - Connection Strings (MSDAORA.1)
5) Publishing the package on Server best way.
Thnak a lot for all your valuable time and efforts.
AWM
I've installed 32 and 64 bit oracle drivers. I was testing running the two different dtexec.exe programs the other day, logged in as the sql agent and they both worked. Running the 64 bit as a job did not work. 32 bit does not work, since the agent process is 64 bit, from what I understand.
Today I'm working on it again and trying the same steps. Running the 32 bit executable dtexec is now returning "not a valid win32 executable". I swear this worked the other day, and works on our other server.
Running the 64bit executable from the agent just hangs up on this log entry:
HRD1.Cardiff (my oracle connection)
ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.
Anyone know what is going on?
http://support.microsoft.com/kb/918760/
I read this article, but didn't think it applied,since I chose for protectionLevel = sql to handle permission (I think they ) -
So I created a proxy using my credentials and gave it access to cmdexec and ssis and it worked. Can anyone explain this to me??
Hi,
I have created a simple report that reads data from Oracle within Visual Studio. I have no problem with previewing the report within Visual Studio. When I deploy the report to the Report Server (same machine) and try to open the report through Report Manager, I get the following error message:
An error has occurred during report processing.
Cannot create a connection to data source 'xxxx'.
System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
I am aware of the following issue that requires extra security to be assigned to the Oracle directories: http://support.microsoft.com/Default.aspx?kbid=870668
Even after applying the Read/Execute access to the Network Service account that is running the Reporting Service, I still get the error message.
Can anyone help me with the debugging of this issue?
Thanks,
Ben
I have created reports in SQl Server 2005 Reporting Services using an Oracle Data Sources. When I Preview the report in VS 2005, It runs fine but when I deploy it, it fails to make a coonection to the oracle data source.
Reports off the SQL Server Data Sources arerunning fine.
Can any one out there help me out on this. I will really appreaciate.
Regards,
Sam.
I have a dts package that transfers data from a view into
a table structure on another server. Occassionly the
scheduled package will fail with the following error:
Error = -2147467259 (80004005) Error string:
[DBNETLIB][ConnectionRead (recv()).]General network error.
Check your network documentation. Error source:
Microsoft OLE DB Provider for SQL Server Help
file: Help context: 0 Error Detail
Records: Error: -2147467259 (80004005); Provider
Error: 11 (B) Error string: [DBNETLIB]
[ConnectionRead (recv()).]General network error. Check
your network documentation. Error source: Microsoft
OLE DB Provider for SQL Server Help file: Help
context: 0 DTSRun OnFinish: Copy Data from PS...
Process Exit Code 1. The step failed.
Once the package fails I will rerun it several times
without any modifications and eventually it will run to
completion successfully. One change that I have made while
troubleshooting is to change the default network package
size from 1 to 1024 or 2048. Although this has worked I'm
not confident that the package wouldn't have run without
that change.
Has anyone seen this error before or anything similar?
I am having some difficulty to update a record in a table from SQL Server 6.5 to Oracle 7.3 DB.
Basically I want to write a insert trigger in Sql Server 6.5 table and I want to update the same inserting record to Unix Oracle table. I tried by writing a DLL and use that in SQL Server External Stored Procedure, but I dont know how to pass the parameter for that. Parameter here is record which I want to insert in to Oracle Table.
Is there any easy way to do that? Did any body did that before? Please help me out.
Thanks a lot
We are in the process of setting up some type of interface between 2 applications that utilize SQL Server(ours) and theirs which utilizes Oracle. These servers will actually sit in the same server room. My thought was to take the simple approach of each DB setting up views needed by the other and assigning a user and security so the other DB can look at the data. We currently do this in house. THeir solution is to use a somewhat sophisticated mesaging system which will pass XML information back and forth between the systems. I hate to take the simpleton approach but why go through all that trouble where a simple view not only provides the same functionality, but is a dynamic as it gets. If anything goes wrong with the messaging system itself or problems with a specific message this needs to be resolved before the data is available. Non of this is a problm with the view. Any input from anyone who has this in place(either solution) appreciated. Or any arguments against my point of view
View 1 Replies View RelatedHi,For a customer we have implemented a datawarehouse with a connection toOracle. From the beginning of the project the connection to Oraclegives troubles. The next morning is the connection still active andwhen the customer looks in the processes of SQL Server a " Wait type,RESOURCE_SEMAPHORE." is shown. For what i know. SQL Server is waitingfor a resource, in this case Oracle but doesn't tell me anything aboutwhat could be the problem.The customer uses the Oracle driver instead of a microsft oracledriver.What could it be? and how can we tackle this problem? Are there ways tolook from Oracle point of view? Can we monitor something?Greetz,Hennie
View 2 Replies View RelatedHi,
We are trying to change our current SSRS reports to point to an Oracle 10g database. I can connect to the Oracle db from the report server via the ODBC Administrator and also through the BI 2005 studio. The connections work fine. However, when I publish the reports and try to run them from the web I always get a connection error. When I use the oracle connection it acts as if it doesn't see the oracle client and when I use ODBC it throws a werid 114 error.
Is there anything I am missing? I just don't understand why the report will work in BI Studio, but not when it is published (on the same machine)?
Any thoughts?
S
Hi,
I'm trying to get some developers going with ssis on their desktops running
XP sp 2
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
Oracle client drivers 9.2.0.1.0
Oracle Enterprise 8.1.7.4.0 and 9.2.0.1.0
I have the same setup on my machine and it's working fine. I duplicated steps I used to get data on the develoeper machine and got these errors.
Code Block
Pre-Execute
Execute phase is beginning.
Execute phase is beginning.
PrimeOutput will be called on a component. : 1 : OLE DB Source
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01403: no data found".
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I'm at a loss of where to go next and I need to get these guys rolling!
Next step is to reinstall drivers...but I'm doubting that is going to have any effect.
Thanks for any help
The problem being faced is : I am unable to access the oracle data through DTS Transform Data Task or Data Driven Query Task.
I have added the connection object . The test connection succeeds but when I move to the properties of either TDT or DDQ , It just hangs up
I'm trying to organize this SQL query from a packet capture and I'm more of a network/application guy, not so much of a DBA. To me it looks like they are using variables in their query and the "@" is a delimiter.
S E L E C T [ t 0 ] . [ S E C T I O N N A M E ] , [ t 0 ] . [ P A R A M E T E R N A M E ] , [ t
0 ] . [ I N T V A L U E ] , [ t 0 ] . [ S T R I N G V A L U E ] , [ t 0 ] . [ D A T E V A L U E ] , [ t 0 ] . [ I N F R A S T R U C T U R A L ]
, [ t 0 ] . [ S i t e P a r a m e t e r s I d ] F R O M [ d b o ] . [ S I T E _ P A R A M E T E R S ] A S [ t 0 ] W H E R E ( [ t 0
] . [ S E C T I O N N A M E ] = @ p 0 ) A N D ( [ t 0 ] . [ P A R A M E T E R N A M E ] = @ p 1 ) @ 4@ @ p 0 n v a r c h a r ( 3
) , @ p 1 n v a r c h a r ( 1 0 ) @ p 0 4 W e b @ p 1 4 M a x Q u e r i e s
[code]...
Hello,I was wondering is the following is correct with the network packet size.I've installed sql server 2000 and made some changes in the configuration.Now i've read that sql server's default network packet size is 4096 bytes,but when i look up the advanced tab, in the optionsmenu of the enterprisemanager, the networkpacketsize is 0!Now i see that some connections are memoryconsuming, could the above hassomething do with this and should i change the network packet size.I would like to have some help with this.Thnx
View 1 Replies View Related