I have Server1,server2( local servers)
these severs are in network
server1 is the live server(database and application)
server2 is the local database server
End users useing application enter data into(server2),here lote of Transactions going everyday
I need to load data from server2(Local DB Server) to server1 Periodically in daily or hourly basis.
I tried to load data from the table in different server.
If I just want to limit one year data ( using date_key in that table ) then what task do I need to do that?
Please let me know.
Thanks.
I want to load historical data from an old system into a new one.Thing is, that old system stored dates as Datetime and the new one uses DateTimeOffset.
All data was collected in the same Time Zone... but with the Daylight Saving Time (DST)
The offset is either +04:00 or +05:00, based on the calendar date. To add to the complexity, the rules for DST changed a couple of years ago.
To determine the offset, I'd need to know what was or would have been the server Timezone for each historical date.
I have a table in Server A and it has 5 columns. One is Address & ID, CreateDatetime,..
I need to transfer data from this table from Server A to server B for a report pupose. The Address column in this table has some places two address in the table. I am giving ex below
Address
Houston, Dallas
Redmond
Sacramento
New Jersey, New York
I want to avoid the rows where address are two Houston, Dallas & New Jersey, NewYork to the destination table in server B and need to do incremental loads.
how to proceed with this?
The version we are using is Sql Server standard edition 2008r2
Tried loading JSON data to Sql Server ? Sample format is given below..Don't see any easy way doing it except writing some C# code deserialize it.
[ {
"name" : "peter_2.jpg",
"createdDate" : 1259728960000,
"lastModifiedDate" : 1308174976000,
"Secondary" : [ {
"Id" : 106275817,
"Sid" : 1
[code]...
hey all,
i want to know Equivalent of Load Data Infile of MySQL in SQL Server 2005?
in mysql we can direclty load file with Load Data infile query.
my question is how to do this in sql server 2005?
thanks.
What is the syntax to verify that the partition data is loaded into the correct partition.
View 0 Replies View RelatedWhat is the syntax to verify Partition data load.
View 1 Replies View RelatedI have a ssis package, which runs on date parameter. If we dont specify the date it always load data for yesterday's date. And if we give any specific date like '2015-05-10', It should load for that date. How can we achieve this dynamically (using package configuration)? Once we load for any specific date, package should be set for yesterday's date dynamically. How to achieve this as I am new to SSIS.
View 2 Replies View RelatedIs there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
how to load the data from oracle to sql server
oracle source is having 7 tables
sql server target is having 7 tables
i have used VISUAL STUDIO and created the one data for individual but how to run in sql server that ssis package
Looking for sample ETL package to extract data from SQL Sever Database and load into Oracle Database using SQL SERVER INTEGRATION SERVICES 2008. The requirement is for full load and incremental load both.
View 5 Replies View RelatedHow to write Stored Procedures to load the Data Model from OLTP to DWH ?
View 9 Replies View RelatedI get this error when I open powerpivot documents in sharepoint.
"We cannot locate a server to load the workvbook Data Model."
after I've looked into the logs I came up with this:
Check Server Version (SQLSERVER2012POWERPIVOT): Fail (Expected: >=11.0.2800.0, Actual: 11.0.2100.60).
--> Check Deployment Mode (SQLSERVER2012POWERPIVOT): Pass.
MonitorableCheck Server Configuration (SQLSERVER2012POWERPIVOT): Fail (Uninitialized, ConfigurationError, WrongVersion).
SSPM: Initialization failed on server SQLSERVER2012POWERPIVOT: Microsoft.AnalysisServices.Streaming.ServerConfigurationException: Server SQLSERVER2012POWERPIVOT failed configuration checks (Status = Uninitialized, ConfigurationError, WrongVersion). at Microsoft.AnalysisServices.Streaming.OnPremise.Server.AssertServerConfiguration(Server amoServer, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken ctx)
how can I update my analysis server version that doesn't affect anything else?
should I install a CU on my SQL or upgrade it?
I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies View RelatedI am trying to load data from Excel 2007 version into SQL server 2014 DB. I am getting below error" SSIS Error Code DTS_E_CANNOTACQUIRE CONNECTION FROM CONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed".I have tried all options like changing Delay Validation is TRUE and in properties i changed runtime 64 bit to FALSE but still getting above error.
View 3 Replies View RelatedHello
I have recently downloaded Orcas beta VS product and had no previous version of VS before. The install went clean and I have been able to generate Window apps and web apps with very little issues; however, I have one issue with running a web app using the "view in browser" option for checking an aspx page for validity. If I use the default Northwind database provided and generate an aspx form using the "DataSet" toolbox widget, the tool prompts for the datasource etc. required to generate the required code. I can select the Northwind database and select the desired columns from one of the tables. Once completed, I build the project (clean build) and then select the "view in browser" option to verify the results. The result is an error page indicating a server error ->
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
I created on odbc connection to an iSeries(as400) box and was successfull in displaying the table on the webpage! I looked into the web.config file and it appears that all the required XML data is present. Any help would be appreciated as I am fairly green when it comes the .NET world.
Thanks
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
I need to load the latest csv files from file server , The files are placed in a folder called -
Posted 02022015- --> csv files .
I am able to copy the csv files from filserver using bulk insert (manually) , giving the file location
I am having difficulty picking up the latest folder which is posted on the server and import it into database using a stored proc .
Hi,
How can i install Report server on a load balanced server.. My sql server is on a different machine and we have 2 webservers where we need to install Reporting services. Any help will be appreciated.
Thank you,
Karen
I want to schedule a job on a 7.0 Server, which could run a LOAD DATABASE on a 6.5 Server. Anyone know a way to do this?
View 6 Replies View RelatedPlease help. We have no idea what is wrong.
Error message occurs at the end of the load.
"Error at Destination for Row number 6218607. Errors encountered so far in this task: 1. SqlDumpExecptionHandler: Preocess 11 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process."
Thanks for your help
Adrian.
Is it possible to take a backup of a database and load it to another server?
I know the users id will be messed up. But, I don't want to do a detach
or a DTS task. I just want to verify that the backup is good.
thanks
I want to schedule a job on a 7.0 server that will run a LOAD DATABASE command on a 6.5 server. Is there a way to do this?
View 1 Replies View RelatedHi, I've read from a topic in this forum saying that we could store PDF files in a hard drive location and import the link into a table of database in SQL server 2005, but i don't know how. So I really appreciate if someone could show me how to write a store procedure or a scripto to do this?
And by the way, i have another question. From that PDF files link, is there any way that we could call that pdf files and print that files from SQL script or SQL store procedure. Thanks a lot
Nick
Hi there,
How do i load a XML document saved in SQL server as a XML data type into
XmlDocument xdoc = new XmlDocument();xdoc.Load(// INTO HERE );
I can load a xml file saved to disk but haven't figured out how to retrive from a recordset. I have tried the following:
XmlDocument xdoc = new XmlDocument();xdoc.Load(GetXmlFile(pnrID).ToString());
public string GetXmlFile(int pnrID){
SqlConnection cnn = null;SqlCommand cmd = null;
string XML = "";
try {
cnn = new SqlConnection(); cnn.ConnectionString = "Server=;Initial Catalog=;UID=;PWD=;"; cnn.Open();
string selectQry = "SELECT [XML] FROM [TEMP_PNR] WHERE PnrID = @PnrID";
cmd = new SqlCommand(selectQry, cnn);
cmd.Parameters.AddWithValue("@pnrID", pnrID);
SqlDataReader rdr = cmd.ExecuteReader();
if (rdr.Read()) XML = rdr.GetSqlXml(0).ToString();
}
catch (Exception ex) { throw ex; }
finally { cmd.Dispose(); cnn.Close(); }
return XML;
}
But this genereates the following error: Could not find file 'C:Program FilesMicrosoft Visual Studio 8Common7IDESystem.Data.SqlTypes.SqlXml'.
Any idea how i can achive this?
Hi!Currently we only have one SQL Server database in our production system. I would like to add one more SQL server 2000 database. I would like to configure them so that both server share the load and Failover. I did some research and I found that I can do this by installing the OS (Windows 2000 Server Enterprise Edition) and SQL 2000 Enterprise Edition on both machines using the windows clustering. I want both servers to be active. They both have a copy of the production data. What I don't know is that, if it is possible to synchronize the data on both databases using SQL Server Replication utitlites. From what I know one SQL Server must be Publisher and one Subscriber. Can one sql server be both? Because I want both sql server to be identical. Can I set up replication between more than 2 servers? We just need to add one server for now but I would like it to be expandable. In the future we may need more.So Please provide me some ideas and answers about the following.1- Can two SQL Server cross replicate (both update each other in order to be identical)?2 -Does replication work beyond 2 servers.?3- If you were to set up a production database; what do you recommend considering the load balancing and Failover using Windows 2000 Server Enterprise Edition and SQL Sever 20000 Enterprise Edition?Thanks,Michael
View 3 Replies View RelatedI need to create a test load a MS SQL Server 7.0 server of 250 users.
Does anyone know of any application(s) that can do or any processes
that can mimic a load such as this?
hi gurus,
im sure someone may have already posted this thread once before, but i cant seem find any topics using the search engines.
could some one point me in the right direction when it comes to inserting images into the databases. i.e. how to load/insert images into SQLSERVER2K
thanks in advance
I have to periodically overwrite selected tables in one environment (Prod) with the contents of the same named tables from another environment (Staging).
There are about 200 tables involved.
In SQL Server what would be the best way to do this and minimize logging?
Thanks in advance.
Gerry