How Many Databases Can Add In AlwaysOn Replica

May 14, 2015

is there any limition in AlwayOn to add database in secondary replica?

View 2 Replies


ADVERTISEMENT

SQL 2012 :: AlwaysOn Secondary Replica - Resolving State

May 21, 2013

I have an AlwaysOn Availability group configured between 2 nodes (Synchronous)

Automatic failover was working fine until recently

I can failover between the nodes manually but automatic failover doesn't seem to be working. In my earlier test, I would shut down the SQL Service on the primary and within seconds, the secondary replica would take over. Recently I have performed the same test and the secondary replica enters the resolving state and the DB in unavailable.

I have tried everything here: [URL] ....

The only change I made was changing the availability mode from Synchronous to Asynchronous - Could that be the cause?

View 3 Replies View Related

SQL 2012 :: Clustering AlwaysOn - Primary And Secondary Replica

Apr 11, 2014

Looking for info on ole/requirement of primary and secondary replica under SQL Server 2012 AlwaysOn.

View 4 Replies View Related

SQL 2012 :: How To Change Backup Replica In AlwaysOn Cluster

May 6, 2014

How can we change the backup replica in Always on Cluster. I am not able to take backup because of this.

View 7 Replies View Related

SQL 2012 :: AlwaysOn Async Replica Back To Sync

Aug 19, 2014

After failing over to the DR replica. All databases are out of sync. DR replicas were setup as async the other 2 are set up as sync. Is this by design. No data has been updated to any of these as they are test dbs. So all dbs should be the same, no data loss.

View 0 Replies View Related

Application With AlwaysOn Read Only Replica In Synchronous Commit

Mar 8, 2015

I am trying to implement a read only replica to move much of the data read for an application to the secondary replica. Initially I had the the primary and secondary set to asynchronous commit. QA brought up an issue with creating entities from the application because after the creation of an entity the application turns around and repopulates the entire aggregate object. Well it seems that the application was reading the secondary replica before the data had been committed. Although I understand the issues that synchronous commits can cause, I went ahead and made the change as I expected it to fix the issue. After changing the primary replica to synchronous we still had the error, so I also changed the secondary although that makes no since, but the issue remains.

View 5 Replies View Related

SQL Server Admin 2014 :: Set Up AlwaysOn Replica For Reporting

Jun 17, 2015

I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.

The database that needs to have alwayson setup has column level encryption enabled.

Other Questions,

* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server?
* What would be preferred Quorum settings?
* What is the setting for 'readable secondary' for primary and replica db?
* What should be the setting for 'Connections in Primary Role' for primary and replica db?
* We are trying to setup without a Listner. Do I need to setup AG Listener? Can the application exclusively use the [secondary instance name].[replica DB name] without a listener?

View 4 Replies View Related

SQL 2012 :: Failover On 2 Servers AlwaysOn AG With Read-only Secondary Replica

Mar 28, 2014

What happens when an automatic failover occurs, in a two server AlwaysOn Availability Group configuration, where the secondary replica is configured as read-only?

Will it only allow read-only connections, or will it become read-write and can accept INSERT, UPDATES and DELETES when assigned the new role as Primary?

Is it correct that adding a third server/node, that just acts as passive and should be used for automatic failover, to support true HADR, would NOT need another license .. and that licenses would only be required for the previous Primary and Secondary (Read-Only) replicas?

View 3 Replies View Related

SQL 2012 :: VLFs On AlwaysOn Primary Replica After Log Backup From Secondary

Aug 6, 2014

I was working on a job to send me info each morning about database file free space and was noticing some odd things when looking at the log file VLFs for one of my databases in an AlwaysOn availability group.When I run DBCC LOGINFO on the secondary replica for this database, I get what I expect and most VLFs have a status of 0 (indicating the VLFs are reusable or unused). When I run DBCC LOGINFO on the primary replica, all of the VLFs have a status of 2 (active or recoverable).

Since log backups on the secondary replica in AlwaysOn still truncate the log in the primary replica, I would expect that the VLFs in the primary replica would also be mostly in a reusable or unused state. My log file sizes are the same size on each server and my backups are completing successfully. what might be causing the VLFs on the primary replica to have a status of 2 in DBCC LOGINFO when taking log backups from the secondary replica?

View 6 Replies View Related

SQL Server Admin 2014 :: AlwaysOn Replica Database For Reporting

Feb 1, 2015

We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.

View 3 Replies View Related

SQL Server Admin 2014 :: AlwaysOn Read-Only Replica Routing

Jun 22, 2015

Having an annoying AG/AO problem with the read only routing side of it.

Let me give some specifics first:

2 SQL Server Instances, Not Clustered.
Availability Group is named 'Ireland'

There is a primary Replica and a Secondary Replica, named:

'IrelandPrimary' and 'IrelandSecondary'

There is a listener configured with the name 'ListenIreland' on Port 14330 (the two 3's are correct)

Read Only Routing URLS are configured as follows:
IrelandPrimary tcp://Ireland.dom.local:49891ALL
IrelandSecondary tcp://Ireland.dom.local:49841ALL

So now my problem:

When I try to connect using the ApplicationIntent=Readonly; or even using -K ReadONLY in sqlcmd I get the error telling me that my connection was actively refused.

This is connecting to the Listener, not the instance itself - that works fine. I'm at a bit of a loss now.

To explain what I am trying to achieve is a for a connection to be redirected to the secondary replica when its set for read-intent.

I've just noticed that it only fails when I specify ApplicationIntent=ReadOnly; If I omit the Intent It connects to the read-write database instead.

View 3 Replies View Related

Recovery :: Error Adding Replica To AlwaysOn Failover Cluster?

May 22, 2015

I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard.  When I enter the name of the target node (secondary replica) server and press connect, I get the following:   

A network-related or instance-specific error occurred while establishing a connection to SQL Server. 

The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified

The SQL Browser service is up and running on the target.  I am using an Azure VM for my SQL instance.  This cluster spans geographies from our on-premise site to Azure via a VPN.  This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03. 

[URL]

Full error:

Connect to Server
Cannot connect to ssasnodeaz03

Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server. 

The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified

View 8 Replies View Related

SQL Server 2014 :: Modification Of SSIS Package With AlwaysOn Availability Replica?

Dec 1, 2014

We are currently using 2008 environment. We do have an SSIS Package running. The package used to run everyday and take the production server full backups and restore into the another server. Then do some delete commands and do some updates in that database on that server (We have some sensitive data other than Production we have to run that scripts in any environment). After run all those delete statements another team will read the data from that database.

We are planning to migrate to 2014 and set up always on and use the replica as the source. In this case how the package will work?

How to change that SSIS package. With the 2014 always on we are directly reading the data there is no backups to restore then how to run the delete statements?

View 0 Replies View Related

SQL Server Admin 2014 :: AlwaysOn Read Only Replica - SP Execution Error

Oct 8, 2015

We have always on setup in our environment with read only replica. The primary database has 2 schema one is a dbo and other xyz. We have some store procs created in dbo schema and xyz schema. These store procs are being used by SSRS reports to retrieve the data (select only) no data changes will be made.

when we run the store proc from the read only server the storeprocs in the dbo schema run fine but xyz schema are failing with the message saying failed to update the database as this is a read only...

View 1 Replies View Related

SQL 2012 :: AlwaysOn Availability Group Replica Ends Up With User Account As Owner

Sep 5, 2014

Setting up a test AlwaysOn Availability Group for one database.

However, whenever I restore the database to the replica server and join it, it ends up with my user account as the owner of the database.

Obviously I do not want a user account as the database owner, but since it is read-only I cannot modify it directly. If I were able to fail the AG over to the replica, I could change the owner then, but I cannot due to business requirements. this AG is to essentially serve as a replacement to log shipping.

I tried doing the backups and restores using EXECUTE AS login = 'sa', and yet it still shows up as my user account.

View 2 Replies View Related

SQL Server Admin 2014 :: AlwaysOn - Amount Of Data To Move To Replica Node

Aug 4, 2015

Background information: SQL 2014 Ent. highly volatile OLTP environment. We generate 10 - 12 GB compressed transaction log backup files every 15 minutes.

Currently - we have two-node A/P cluster residing on flash array. Need to leverage AlwaysOn to offload processing. Replica server with have Flash storage. Replica node has same CPU and memory footprint. 10GB connection between nodes. Anyone generating such large transaction log for 15/30 minute time period?

View 0 Replies View Related

SQL 2012 :: Setup Replica For Databases For Reporting?

Jun 17, 2015

I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.

The database that needs to have alwayson setup has column level encryption enabled.

* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server?

* What would be preferred Quorum settings?

* What is the setting for 'readable secondary' for primary and replica db?

* What should be the setting for 'Connections in Primary Role' for primary and replica db?

* We are trying to setup without a Listner. Do I need to setup AG Listner? Can the application exclusively use the [secondary instance name].[replica DB name] without a listner?

View 2 Replies View Related

SQL 2012 :: Backup On Primary Replica In Case Of Secondary Replica Is Down

Jun 9, 2014

I have 2 SQL Server replicas configured on SQL Server 2012 AlwaysOn. e.g. SQL1 & SQL2.

I have configured backup job on both SQL Server with the following statement. and the job occurs every 10 minutes.

•declare @DBNAME sysname,@sqlstr varchar(500)
set @DBNAME = 'dba'
IF (sys.fn_hadr_backup_is_preferred_replica(@DBNAME)=0)
BEGIN
--Select 'This is not the preferred replica, exiting with success';

[Code] ...

I turned off SQL2 for Windows maintenance. So there is only SQL1 is online. Afterwards. I checked the backup folder and didn't see any new backup files was created after SQL2 was offline. I rerun the job. It still doesn't backup database on the Primary Replica. Then I searched on SQL Server Book online. It says

Prefer Secondary

Specifies that backups should occur on a secondary replica except when the primary replica is the only replica online. In that case, the backup should occur on the primary replica. This is the default option.

According to what it says, it should backup on the Primary Replica.

View 2 Replies View Related

DB Engine :: Transaction Log Backup On AlwaysOn Databases

Jun 26, 2015

I am using alwayson on my SQL 2012 databases. I am using ola hallengren scripts for backing up databases. Full & diff db backups work fine, but the log is not getting backed up. The tran log backup job doesn't error out too. Trying to figure out what I may be missing?

View 10 Replies View Related

Recovery :: Maximum Number Of Databases That Are Supported In AlwaysOn?

May 13, 2015

I believe to configure maximum number of replicas it is required to have 5 nodes (1 Primary & 4 Secondary replicas). But how many databases can be included in one availability group, it think it is 32767. When I am referring to below URL it is mentioned something like "An availability group supports a set of read-write primary databases and one to eight sets of corresponding secondary databases. " What does this 'sets' means, is that maximum limit for only eight databases or maximum groups should be eight?

[URL] ....

View 3 Replies View Related

SQL 2012 :: AlwaysOn High Availability Group Showing All Databases

Apr 28, 2014

I came across an issue while migrating from SQL 2005 to SQL 2012 and using AlwaysOn Group. For some strange reason, when ever i connect to the Listener name for each AlwaysOn group, it list all the databases which is on the SQL instance, so i would be able to see databases that is not part of that Availability Group. I am not using default port, so have to put the port after the Name to connect and both Instance and Listener are using different port.
Testing the fail over works fine too, when i perform a manual failover, i can connect to any of the databases in the group from my application with no problem.

Considering that the Listener Port is different to the port which the instance is using?

View 8 Replies View Related

SQL 2012 :: Log Growth On AlwaysOn Availability Databases On Primary Server?

Nov 29, 2014

Secondary server is offline due to a hardware issue and the log files are growing on Primary sever for availability databases. The log drive is running out of space. How can I stop the log growth for the primary databases?

View 4 Replies View Related

Recovery :: How To Manage Data Latency On Read-only AlwaysOn Databases

Aug 27, 2015

We have several read-only nodes in our AlwaysOn cluster, which are set to use Synchronous-commit mode, which ensures that the logs are updated on the read-only nodes before any update statements complete.  Even with this option, if we query a read-only node before the logs have been processed, we can read old data.  I would like to know a strategy to ensure that a read-only query will definitely return up to date information.  I had an idea that if I just used a different transaction type, like Serializable, that it might block the read-only query from actually getting the data until after the log file was processed, but I have not tried it, yet.

I would like to move more queries to the read-only nodes, in an effort to offload CPU utilization from the primary node.

View 2 Replies View Related

SQL 2012 :: Existing Replica MDF File Size Increased In Size Than New Replica Install

Apr 14, 2015

Here are my scenarios:

We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.

1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.

2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.

3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.

Why it is allocating the space differently? This is effecting our initial replica set up times.

View 0 Replies View Related

Need Emergency Help For Replica

May 9, 2006

Dear All,

We have a big concern in our Database system. We have 2000 transactions daily in our database. We need to replicate some how the database for our fail over setup. I tried transactional replication at midnight but our all systems locked and we had a lot of complaints from the customers and It was taking a lot of time to snapshot part and I had to abort it because of these reasons.
I need an advice how I can create a replication or is there any other way to replicate or is there any way to do this process without bothering the system? Please give me some advice and help..

View 1 Replies View Related

Creating A Replica Of A SQL Database.

Jan 18, 2008

Hi i want to create a test environment for a system, therefore i need an exact replica of the database that is currently standing, how can i go about doing this, i am using SQL enterprise manager 2000, thank you.

View 2 Replies View Related

SQL 2012 :: Secondary Replica In AG

May 27, 2015

in my secondary server the database which is in restoring state , when i checked in always on dash board "This secondary database is not joined to the availability group" ,

View 3 Replies View Related

How To Do The Database Transcation Replica ?

Feb 5, 2008

Hi,

I am new to SQL server.

I have two databases lets call them A & B, they reside in two PCs, each pC has its own C/C++ program
working with A or B, Two PCs are linked by PPP (for example), but the link is not permonent available,
the link is only available at certain time period, for example, at midnight.and the link is only last
certain period, during this period, A & B will do the transcation replica( just heard about that!) to
make them identical, A=B.

Now are my questions.

(1) Can database use dial up modem itself ? For PC program it is not the problem, but I am not sure whether
MS SQL server database can be configured to do such job automatically ?

(2) Can database have awareness of whether the link is available or not ? For example A is dialing modem, and
B realize that there is a incoming call.

(3) Once link is established, how two databases start to do the transcation replica ? Does SQL server has such ability to do this automatically ?

(4) Can database notice PC program that changes has occured ? so PC program can process it, see display new data.

Thanks

nick

View 1 Replies View Related

Recovery :: Replica Server Not Available

Aug 11, 2015

I'm new to Sql Server and want to install SQL server alwayson clustering on my test environment. I followed the steps by this site: [URL] ....

On each node I can connect to SQL Server but why my 2nd node is not available so that I can add it as my 2ndary Replica?

According to this site, till "Always-On Availability Group Configuration" everything was successful.

View 6 Replies View Related

Recreate Index On Replica

Jan 30, 2006

I have a slow query. It is indexed and I was wondering if there were any issues with using 'dbcc dbreindex' on each of the 12 replicas, to maybe make it run more efficiently? And is this something I could/should do nightly?

View 1 Replies View Related

SQL 2012 :: Permissions For Read Only Replica?

Jul 2, 2014

I have an availability group with read only replicas, readable secondary set to yes and allow all incoming connections. I have also configured the read only routing (at least I'm pretty sure this is correct).

If I login to SSMS with a user in the sysadmin role I can view the objects in the read only replica database. If I login with a user in the public role I'm unable to get past the obvious error:

"The database databaseA is not accessbile. (ObjectExplorer)"

I've also tried adding the "ApplicationIntent=ReadOnly" option.

View 4 Replies View Related

Query Replica Directly Via SSMS?

Apr 3, 2015

I know it is possible to use the secondary replica to pull data (application intent) etc..

But is there some way to query the replica directly via SSMS?

View 2 Replies View Related

SSIS CDC Components On Asynchronous Secondary Replica

Jan 15, 2015

MSDN states the following on: Readable Secondary Replicas (AlwaysOn Availability Groups) for SQL Server 2014:

Limitations and Restrictions:

Change tracking and change data capture are not supported on secondary databases that belong to a readable secondary replica:

Change tracking is explicitly disabled on secondary databases.
Change data capture can be enabled on a secondary database, but this is not supported.

This confuses me: You can not track the changes. However you can enable CDC?

The scenario I am trying to achieve is to use SSIS CDC components on an asynchronous secondary replica. Is this possible? If not what would be other viable approaches?

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved