How Not To Display Number Of Records In SQLCMD
Jan 26, 2008I would like to run a SELECT statement using the SQLCMD, however, I do not like the count of records be displayed after the execution. How do I do that?
Thanks in advance.
I would like to run a SELECT statement using the SQLCMD, however, I do not like the count of records be displayed after the execution. How do I do that?
Thanks in advance.
I've got a stored procedure that processes a TON of records...
What I would liek to do is to write a row to a "progress" table which shows how many rows have actually been processed.
I have a simple counter defined in the procedure:
SET @COUNTER = 0
Each time the procedure loops through, it increments by 1:
SET @COUNTER = @COUNTER + 1
What I would like to do is write rows to a PROCESS table which would reads:
PROCESSED 1000 rows
PROCESSED 2000 rows
PROCESSED ...... rows
etc.
I have a slight idea how to pull this off, but not sure about the whole even number thing by 1000.
If anyone has any insight it would be greatly appreciated!!
Thanks in advance!
I'm using the query desinger in ASP.NET , however the number of recordsin the resultset are not displaying, so I cut and paste it into Queryanalyzer which is silly.How do I set this in the output window, or result grid?Thanks Moe
View 1 Replies View Relateddeclare @table table (
ParentID INT,
ChildID INT,
Value float
)
INSERT INTO @table
SELECT 1,1,1.2
[code]....
This case ParentID - Child 1 ,1 & 2,2 and 3,3 records are called as parent where as null , 1 is child whoose parent is 1 similarly null,2 records are child whoose parent is 2 , .....
Now my requirement is to display parent records with value ascending and display next child records to the corresponding parent and parent records are sorted ascending
--Final output should be
PatentID ChildID VALUE
33 1.12
null3 56.7
null3 43.6
11 1.2
null1 4.8
null1 4.6
22 1.8
null1 1.4
I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies View Related INPUT
TIME action OUTPUT
17:42 SELL 1
17:43 BUY 1
17:44 SELL 1
17:45 SELL 2
17:46 SELL 3
17:47 BUY 1
17:48 SELL 1
17:49 SELL 2
17:50 SELL 3
17:51 SELL 4
17:58 SELL 5
Here u will see the INPUT and OUTPUT.
I have table INPUT. I want to display OUTPUT as RowNumber
I have a query similar to below
case when matrix = 'seven' then '07'
when matrix = 'eight' then '08' else '00' end from table
The output displays only '7' instead of '07' and so for eight also.
Where - in SQL Server Profiler - can I see the port number that someone has used to connect to a database?
e.g. given the connect string "tcp:MACHINE1INSTANCE7,3045" - where in Profiler does it tell me that the connection is using port 3045? I looked at "audit login" and "existing connection" but I don't see a port number...
Any other SQL/Windows tools that I can use to monitor connections to databases on specific ports?
thanks
1. how to show page number & total page number in report body?
2. how to show total records number?
Hello,
I am working on a project that displays images. Before you can get to the image, you have to select a category that the image may be in. After that, you select the sub categories. I am trying to display a count of the number of records that the subcategories contain. Here is an example:
The user can make a selection from the categories listed below:
Geographic Area
Time Period
Topic
Record Type
If the user selects time period, he/she is taken to a list of subcategories. I would like to display the subcategories with a count of the number of records that will be displayed if it is selected. Listed below is an example of what this would look like:
Colonial (10) -----the number in parenthesis is the number of records that will be displayed if selected------
Gilded Age (12)
Revolutionary (9)
Progressive Era (22)
Is there a way to display the number in parenthesis using ASP.Net and SQL Server 2000? Any clues will be greatly appreciated.
Thanks
I'm stuck on converting a datetime field to Int. Basically, one of the fields in the select returns the datetime of a journey. However I need to be able to add up the number of days for a specific person who done that journey, e.g. it will return 21/08/2014, 22/08/2014 etc...
I then need to total up the days as a new field to display the number of days.
Can you do this by converting a datetime to int then use COUNT on the int?
Do anybody know how can I find or display to the current SQL server 2005 record number (eg. 10 of 1600) on a VB 2005 form label. The BindingNavigator on the form has been deleted. Thanks.
View 6 Replies View RelatedI wrote a Scalar UDF in SQL2005 that returns an integer. I want to be able to display this integer in a ASP.Net 2.0 web page. I typically use a DAL for all data so I added an ObjectDataSource as a Qeury that contains only the UDF. How do I easily display the value in a Label Control or?
I have tried to use a Repeater with a label, a Formview with a Label, all to no avail. Any suggestions?
A SQL Server 2005 stored procedure expects a parameter UserID depending upon which it retrieves the no. of records & OrderIDs corresponding to the UserID from a DB table (note that OrderID & UserID are two of the columns in the DB table). So for e.g. consider a user whose UserID=6 & the DB table has 3 records where UserID=6. In other words, there are 3 OrderID records of the user whose UserID=6, say, OrderID=8, OrderID=17 & OrderID=29. The stored procedure will finally return 2 columns - the OrderCount (which is 3 for UserID=6) & the OrderID (which will be 8, 17 & 29 for UserID=6). This is the stored procedure:ALTER PROCEDURE dbo.OrderCount @UserID intASDECLARE @OrderCount intSET @OrderCount = (SELECT COUNT(OrderID) FROM NETOrders WHERE UserID= @UserID)SELECT @OrderCount AS OrderCount, OrderIDFROMNETOrdersWHEREUserID = @UserIDIn a VB class file, I am invoking the stored procedure in a function named GetOrderCount which returns a SqlDataReader back to the calling ASPX page. I want the ASPX page to display the 3 OrderIDs of UserID=6 in a Label control. Unlike the DataBinding controls like DataList, DataGrid, Repeater controls, the Label control will not automatically loop through the recordset. So I tried to accomplish this using a For....Next loopDim i As IntegerDim sqlReader As SqlDataReaderiUserID = Request.Cookies("UserID").Value'ShopCart is the name of the class in the VB class fileboShopCart = New ShopCartsqlReader = boShopCart.GetOrderCount(iUserID)While (sqlReader.Read) If (sqlReader.GetValue(0) > 1) Then pnlLinks.Visible = True For i = 1 To sqlReader.GetValue(0) lblLinks.Text = sqlReader.GetValue(1)(i) Next i Else pnlLinks.Visible = False End IfEnd WhileBut this generates the following error:No default member found for type 'Integer'.pointing to the linelblLinks.Text = sqlReader.GetValue(1)(i)in the above shown ASPX code. Can someone please correct me & suggest how do I loop through the recordset so that I can display the records in a Label control?
View 8 Replies View RelatedI have the following sql table and would like to group the results by "StoryTitle" to display in a datalist. The Storytitle field in the datalist is a LabelID StoryTitle StoryAuthor Rating StoryID Comments
1 About Me goodyone 6 20 Great Story
2 About Me goodyone 5 20 Love your work
3 Hello World magicme 6 26 What a Story
4 Hello World magicme 7 26 This Reminds me of...
I know i have to do something in the SQL Datasource statement. Not sure how to do it. here is my statement below
<asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:BrillConnectionString1 %>"
SelectCommand="SELECT * FROM [iaw.comments]">
</asp:SqlDataSource>
TableName: Order_Archive
Fields:
orderid
load_date
filename
order_date
dollar
I load a file each week into a table, each file has unique orderid, load_date, filename, order_date and dollar. However the same orderid, order_date and dollar could appear in another file with different load_date and file_name.
File1:
orderid, load_date, file_name, order_date, dollar
'1000', '2011-01-01', 'File1', '2011-01-01', '101'
'1001', '2011-01-01', 'File1', '2011-01-01', '102'
'1002', '2011-01-01', 'File1', '2011-01-01', '103'
File2:
orderid, load_date, file_name, order_date, dollar
'1001', '2011-01-08', 'File2', '2011-01-01', '102'
'1002', '2011-01-08', 'File2', '2011-01-01', '103'
'1003', '2011-01-08', 'File2', '2011-01-01', '104'
Question:
whats is the best way to retrieve the distinct records that has the most recent load_date? expected results below:
Expected Results:
orderid, load_date, file_name, order_date, dollar
'1000', '2011-01-01', 'File1', '2011-01-01', '101'
'1001', '2011-01-08', 'File2', '2011-01-01', '102'
'1002', '2011-01-08', 'File2', '2011-01-01', '103'
'1003', '2011-01-08', 'File2', '2011-01-01', '104'
hi friends,
how to display the records for this week?
for today i used this query to dispaly the values
select count(*) from tbl_voting v,tbl_lkvotefor l where v.voteforid=l.voteforid and v.creationdatetime=CONVERT(VARCHAR(10), GETDATE(), 101)
hi friends,
how to display the records for current month?
finding the solution for the below query?It displays repeated records.
select distinct ku.username,rro.role_name,rp.resource_type_code,kr.region_name,kc.currency_name,
fcr.cost_rule_id RULE,fcr.rate current_rate,pp.project_name,kou.org_unit_name ORG_UNIT
from
[code]....
in my sql query,when it run then it displays records as follows
dt_id daily_type dates emp_mgmt_id emp_name etc--------
48 Electrical 03/14/2008 22 abc
----------
49 Mechanical 03/14/2008 35 xyz
-------------
48 Electrical 03/14/2008 22 abc
----------
49 Mechanical 03/14/2008 35 xyz
-------------
i want to display records only once like as follows
dt_id daily_type dates emp_mgmt_id emp_name etc--------
48 Electrical 03/14/2008 22 abc
----------
49 Mechanical 03/14/2008 35 xyz
-------------
if i use group by on some fields then it gives error as follows
Column 'Daily_Time_Entry.daily_type' is invalid in the select list because it is
not contained in either an aggregate function or the GROUP BY clause.
so how can i design query so records display only once not repeated,or is any
alternative,to solve this .
my sql query as follows
SELECT dl.dt_id, dl.daily_type, convert(char,dl.dt_date,101) as
dates,dl.emp_mgmt_id,
emp.emp_name,emp.employee_id,dl.project_type,dl.project_id,
dl.cec_job_id,
cec.cecjobname,dl.time_st,dl.time_ot,dl.time_dt,op.other_proj_id,
op.customer_name,op.project_name,op.owner_rep_phone_num1,dl.work_desc,
m.material_id,m.material_type,m.material_date, m.project_type
,m.project_id,
m.qty,m.description,m.material_unit_price,m.material_markup,
m.material_subtotal,
m.cec_job_id,m.location
FROM material m left outer join
Other_Project op on m.project_id=op.other_proj_id left outer join
Daily_Time_Entry dl on
dl.project_id =op.other_proj_id inner join Employee_Mgmt emp
on emp.emp_mgmt_id = dl.emp_mgmt_id inner join CEC_Job cec
ON dl.cec_job_id = cec.cec_job_id
where (dl.dt_date='3/14/2008'and m.material_date='3/14/2008') and
(dl.project_type='Other Project' and m.project_type = 'Other Project')
and (dl.cec_job_id=m.cec_job_id) and (dl.daily_type='Electrical') and
(dl.project_id='18')
uday
hi i want to display records as per data in ms sql 2005
my data is as follows
Table name & fields are as follows :--
1) Ab_Corporate_Project
Fields are :
Ab_crp_id- int
Contract_no varchar
Project_no varchar
Field_order_no varchar
Ab_type varchar
Owner_id int
Records in Table Ab_Corporate_Project is as follows :
Ab_crp_id Contract_no Project_no Field_order_no Ab_type Owner_id
1 123 pr123 fd222 LS 2
2 323 pr323 fo122 GMS 3
3 243 pr243 fo233 EMC 1
2) Ab_Plant_Project
Fields are :
Ab_plant_id int
Service_order varchar
p_type varchar
Owner_id int
Records in Ab_Plant_Project is as follows
Ab_plant_id Service_order p_type Owner_id
1 so111 LS 1
2 so123 T&M 3
3 so110 EMC 2
3)Other_Project
Fields are
Other_proj_id int
Po varchar
Otype varchar
Owner_id int
Records in Other_Project is as follows
Other_proj_id Po Otype Owner_id
1 p123 LS 3
2 p22 EMC 3
3 p231 GMS 2
4)Owner_representative
Fields are
Owner_id int
Owner_names varchar
Records in Owner_representative are as follows
Owner_id Owner_names
<!--[if !supportLists]-->1 <!--[endif]-->john
<!--[if !supportLists]-->2 <!--[endif]-->amey
<!--[if !supportLists]-->3 <!--[endif]-->nickols
5)Employee_table
Fields are
emp_id int
Emp_name varchar
Records in Employee_table are as follows
Emp_id Emp_name
1 andrue
2 handy
3 sims
4 sandy
6)Daily_Time_Entry
Fields are
Dt_id int
Daily_type varchar
Dt_date datetime
Emp_id int
Project_type varchar
Project_id int
Time_st int
Time_ot int
Time_dt int
Records in Daily_Time_Entry are as follows
Dt_id Daily_type Dt_date Emp_id Project_type Project_id Time_st Time_ot
1 Elect 12/03/2008 1 AB Corporate 2 10 8
2 Mech 13/03/2008 2 AB Corporate 1 10 10
3 Mech 13/03/2008 1 AB Plant 2 5 6
4 Elect 13/03/2008 3 AB Plant 3 7 8
5 Mech 13/03/2008 2 Other Project 2 5 6
6 Elect 13/03/2008 4 Other Project 3 10 8
Where dt_date is in dd/mm/yyyy format
Also in project_type field -- AB Corporate is taken for Ab_Corporate_Project ,
AB Plant for Ab_Plant_Project, Other Project for Other_Project
This means if Project_type = AB Corporate then search into Ab_Corporate_Project
Else if Project_type = AB Plant then search into Ab_Plant_Project
Else if Project_type = Other Project then search into Other_Project
Now I want to display records as per datewise suppose I want to view records by date 13/03/2008
Record display as follows
Dt_id,Dt_date,emp_id,Emp_name, Project_type ,project_id, contract_no, service_order,ab_type,p_type,otype,owner_id,owner_name,time_st,time_ot
So how can I write query to display records as per datewise display
Plz send me a query for this solution
I am saving files in SQL Server 2005 with a datetime field called news_date_time and I want to display all today's records regardless of the record time.
I tried this code but didn't work..
[code]
SqlCommand sql_command = new SqlCommand("SELECT * FROM files_news WHERE news_date_time = TODAY ORDER BY news_date_time DESC", sql_connection);
[/code]
can you please explian this chart:
The operand expressions are denoted as expression e1, with precision p1 and scale s1, and expression e2, with precision p2 and scale s2. The precision and scale for any expression that is not decimal is the precision and scale defined for the data type of the expression.
Operation
Result precision
Result scale *
e1 + e2
max(s1, s2) + max(p1-s1, p2-s2) + 1
max(s1, s2)
e1 - e2
max(s1, s2) + max(p1-s1, p2-s2) + 1
max(s1, s2)
e1 * e2
p1 + p2 + 1
s1 + s2
e1 / e2
p1 - s1 + s2 + max(6, s1 + p2 + 1)
max(6, s1 + p2 + 1)
e1 { UNION | EXCEPT | INTERSECT } e2
max(s1, s2) + max(p1-s1, p2-s2)
max(s1, s2)
* The result precision and scale have an absolute maximum of 38. When a result precision is greater than 38, the corresponding scale is reduced to prevent the integral part of a result from being truncated.
e1 = numeric(20,8)
e2 = numeric(20,8)
e1/e2
is this correct
max(6,s1 + p2 + 1)
8 + 20 + 1= 29 since under 38 use 29 scale
scale would be max(6,29) = 29 correct???????
p1 - s1 + s2 + max(6, s1 + p2 + 1)
20 - 8 + 8 + 29 = 49 does that mean it truncate the least sugificant digits by 29 - 11 = 18 so the effective result should be numeric(38,18) or ##,###,###,###,###,###,###.000000000000000000 this does not seem to be what you get can some explain also we have seen that if you enter a number in the trillions such 9,999,999,999,999 neither .net or sql management studio cannot display the value?????
How do I display numeric data as text string?? I need the report to spell out the number. 1 would read as One, 2 as Two ect. For example writing the amount on a check. Need to do in SSRS.
View 6 Replies View RelatedIs there a way to control how many Detail Rows are displayed on one page in Table and Matrix controls?
View 1 Replies View RelatedHi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.
How would I list the users in the users table that have duplicate IDs or count of IDs > 1?The UserName field is unique.
State UserName First Last ID City CountTX Kkeaton Kathryn Keaton 1001 Dallas 2TX KakiKeaton Kathryn Keaton 1001 Dallas 2I think I have to use a subselect? If I use group by then it won't show both records. It shows only one of them.Thanks
Craig
Hello,
I have two tables, Promotion and Promolocation. The Promotion table is used to set up promotions or sales, and consists of a PromoID, StartDate, and EndDate. Each PromoID is referenced in the Promolocation table, which is used to assign items to a promotion for various locations or stores. The Promolocation table consists of PromoID, LocID, SkuID, PromoPrice, and DiscLevel.
There are times where an item or SkuID will exist in more than one promotion, however, our application is currently not intelligent enough to determine which promotion to use, so it sets the active promotion based on the StartDate being before other promotions' StartDate and the EndDate being after other promotions' EndDate.
I want to find all promoid's where a sku exists in more than one promotion. I want to signify which promotion is active, using 1 as the first active promotion, 2 as the next active, 3 as the next, etc. To determine which promotion is the first active promotion, the StartDate must be before any of the other promotions' StartDate, and the EndDate must be after other promotions' EndDate. If the promotions' StartDate is after the other promotions' StartDate but not before the other promotions' EndDate, and the EndDate is before or on other promotions' EndDate, then that's the second active promotion. If the StartDate is the same as other promotions' StartDate, but the EndDate is before other promotions' EndDate, then that's the third active promotion.
For example:
PromoID StartDate EndDate
------- --------- -------
PROMO1 1/1/2004 1/1/2006 (1st Active Promotion)
PROMO2 2/1/2004 1/1/2006 (2nd Active Promotion)
PROMO3 1/1/2004 12/1/2005 (3rd Active Promotion)
Here's a query I am using to display all active promotions:
select
pl.promoid,
pr.startdate,
pr.enddate,
pl.locid,
pl.skuid,
pl.promoprice,
pl.disclevel
from
promolocation pl
inner join
promotion pr
on
pl.promoid = pr.promoid
where
pr.enddate >= getdate()
Thanks for your help.
D
I would like to build a query that will return all the records in Table1 that will not match with records in table 2. All colums in table 1 have NULL values. Only one column is populated with state abreviations.
SELECT nvl(field1, 0),
field2,
field3,
nvl(field4, 0),
nvl(field5, 0),
nvl(field6, 0)
FROM TBL1
-------------------------------------------
Result: Record count 3000.
Only field3 is populated everything else is null.
select field3 from tbl1 group by field2 - record count = 48
SELECT nvl(field1, 0),
field2,
field3,
nvl(field4, 0),
nvl(field5, 0),
nvl(field6, 0)
FROM TBL2
-------------------------------------
Result Record count = 0
------------------------------------------------------
SELECT nvl(field1, 0),
field2,
field3,
nvl(field4, 0),
nvl(field5, 0),
nvl(field6, 0)
FROM TBL1
minus
SELECT
nvl(field1, 0),
field2,
field3,
nvl(field4, 0),
nvl(field5, 0),
nvl(field6, 0)
FROM tbl2
---------------------------
Result: Record Count = 48
I used the left join and it didn't work.
I would like to build a query that will display all 3000 records.
Any help will be appreciated.
thank you!
If I have a dimension with 3 records like this:
BrokerDimId BrokerNm
1 Broker1
2 Broker2
3 Broker3
And I have a fact table that has 2 rows that join back to the first 2 dimension rows like this:
BrokerDimId Amt
1 $100
2 $200
I want to create the mdx so that I get all of the dimension rows, even if there is no record in the fact table for it and just default the amount to 0, like this
BrokerDimId Amt
1 $100
2 $200
3 $0
Is this possible using MDX?
I have a table that have student names and their birth dates just like below
a) tblStudentInfo
which shows records like below (Birth Dates are shown in Year-Month-Day format)
ID StudentName BirthDate
1 ABC 2002-12-25
2 DEF 2002-09-10
3 GHI 2002-09-19
4 JKL 2002-06-10
[code]...
I want to perform a query that should display the upcoming birthday of all students according to today.Lets say, today is 2015-10-02, so the query should display the result according to today's date just like below
ID StudentName BirthDate
1 ABC 2002-12-25
2 VWX 2002-01-01
3 STU 2002-02-03
4 PQR 2002-03-05
[code]...
I was wondering if there was a way to display the "other" total that does not appear in a TopN report.
I.e. I display the Top 10 records
I would then like a row saying "All Others" and the subtotal of the non Top 10 records
I would also like to display a Total of the TopN records and what % of the overall that amounts to
Simple example.....
Top 3 Report
1. AAA 10
2. BBB 9
3. CCC 8
4. Others 20
Top N Total 27 (% of total = 57%)
Overall Total 47
Lines in italics are the values I can't seem to get my head around
I have a column in the table which contains below values
Range
XXXX100
xxxx101
xxxx102
...
xxxx1020
below values are strings. I tried using below query but it does not return all values in the range.
Select * from table where Range Between 'XXXX100' AND 'xxxx1020'
May be in need to extract the number to display the values in given range.