How The Heck Do I Use A GUID As A Foreign Key In MSSQL 2005?

Jun 23, 2007

Okay, this is driving me nuts.  It *should* be simple but it is not.  I've spent the last 4 hours scouring the web for what should be a simple thing to find out.

I have the following tables, but everytime I attempt to create a foreign key constraint for the StudentLocations table I get an 'invalid type' error.  I have a GUID as the PK for the Students and the Locations table.  However, since I cannot create two GUIDs (as far as I can tell) for my StudentLocations table, I have instead defined the StudentLocations.StudentID, and StudentLocations.LocationID as binary(16).  Unfortunately, I can't match this binary(16) to the GUID Identity in a foreign key because I keep getting this stupid error of 'invalid conversion type!'. 

 So, how do I do what I am trying to do using GUIDs as my PK for the Students and Locations tables, and the above defined StudentID, LocationID in a StudentLocations table?

Thanks in advance for answering this question.  I should spend 5 minutes searching and then come here in the future...it's way less frustrating!:

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Students]') AND type in (N'U'))

BEGIN

CREATE TABLE [dbo].[Students](

[id] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_Students_id] DEFAULT (newid()),

[first_name] [nvarchar](50) NOT NULL,

[middle_name] [nvarchar](50) NULL,

[last_name] [nvarchar](50) NOT NULL,

CONSTRAINT [PK_Students] PRIMARY KEY CLUSTERED

(

[id] ASC

)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]

) ON [PRIMARY]

END

GO

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Locations]') AND type in (N'U'))

BEGIN

CREATE TABLE [dbo].[Locations](

[id] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_Locations_id] DEFAULT (newid()),

[address_1] [nvarchar](50) NOT NULL,

[address_2] [nvarchar](50) NULL,

[city] [nvarchar](50) NOT NULL,

[state] [nvarchar](50) NOT NULL,

[zip_base] [char](5) NOT NULL,

[zip_four] [nvarchar](4) NULL,

CONSTRAINT [PK_Locations] PRIMARY KEY CLUSTERED

(

[id] ASC

)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]

) ON [PRIMARY]

END

GO

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StudentLocations]') AND type in (N'U'))

BEGIN

CREATE TABLE [dbo].[StudentLocations](

[id] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_StudentLocations_id] DEFAULT (newid()),

[student_id] [binary](16) NOT NULL,

[location_id] [binary](16) NOT NULL,

CONSTRAINT [PK_StudentLocations] PRIMARY KEY CLUSTERED

(

[id] ASC

)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]

) ON [PRIMARY]

END

View 2 Replies


ADVERTISEMENT

Using GUID Fields As Primary Keys W/ Foreign Key Constraints

Nov 17, 2005

Ok, so I've broken down and decided to write myself an invoicing
program.  I'd like to use GUID fields as the Primary Keys in my
table.  Now, I basicly bill for two seperate items:

Deliverables and Services.

So, my Layout's gonna look something like

Create Table Invoice(
     ID UniqueIdentifier Primary Key,
     -- Other Data
);

Create Deliverable(
    ID uniqueidentifier Primary Key,
    ParentInvoice uniqueidentifier,
   -- Other data);
--...

Im sure there are probems with that as it's written feel free to edify me as to what they are. 

my questions are such:

1) Does a uniqueidentifier field automagically get a value?
2) If not how do I generate one in TSQL?
3) If so, what do I use to store my Foreign Keys.
4) How do I declare my Foreign key constraints?

View 12 Replies View Related

Shortcut To Insert New GUID Into Uniqueidentifier Cell In MSSQL Management Studio Express?

Jul 15, 2006

Hi,

anyone knows if there's an easy way to insert new GUIDs into uniqueidentifier cells when editing data in table on Management Studio Express? or Visual Studio 2005 Server Explorer? I can't find a shortcut, and copying from external tools is pain..

I suppose it's possible to build a VB macro in Visual Studio, would it work when editing table data?

Thanks in advance!

View 8 Replies View Related

Deploying MSSQL 2005 Express DB To MSSQL 2005 WKGP Errors

Sep 29, 2006

DB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?

I have tried several approaches.

A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.

TITLE: Microsoft SQL Server Management Studio

------------------------------

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

ADDITIONAL INFORMATION:

The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.

RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476

------------------------------

BUTTONS:

OK

------------------------------



B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:

TITLE: Microsoft SQL Server Management Studio

------------------------------

Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476

------------------------------

ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.

Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476

------------------------------

BUTTONS:

OK

------------------------------

C: I have also tried opening the Database, and back up file through Server Management Studio. without success.

D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.

I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.

Mark Roach





View 5 Replies View Related

What The Heck Does This Error Mean?

Aug 18, 2000

Hello folks....

I'm trying to run this query in SQL Server 7:

SELECT * FROM Addresses LEFT JOIN Contacts USING (contact_id)

and I get this error:

'contact_id' is not a recognized OPTIMIZER LOCK HINTS option.

Anyone know what this error means and how I can get qround it?

Thanks...

View 2 Replies View Related

NO_BROWSETABLE - What The Heck Is That?

Jun 17, 2004

Hi guys, does enybody know what does it do exactly?

SET NO_BROWSETABLE ON/OF?

Thanks much.
Dim

View 2 Replies View Related

Server Configuration For MSSQL 2000 And MSSQL 2005

Sep 6, 2006

Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache

View 9 Replies View Related

Creating Index In MSSQL 2000 From MSSQL 2005

Mar 24, 2008

Hi,

I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.

Ex:-

CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY

(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)

INCLUDE

(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);


Any help in creating such indexes in 2000 version is welcome.

Thanks,
Suresh.

View 2 Replies View Related

Generating Script For MSSQL 2000 From MSSQl 2005?

May 3, 2008

Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.

We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?

Could you please give me the step to do?

Thanks,
Sankar R

View 6 Replies View Related

Migrate MSSQL 2005 Express -&&> MSSQL 2005 Srv

Apr 25, 2006

Hi!

What is the best way to migrate MSSQL 2005 Express -> MSSQL 2005 Srv?

View 4 Replies View Related

MSSQL Express 2005 Vs. MSSQL 2000

Jun 15, 2006

Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.

The scrpt looks like this:


---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------


I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.

I was wondering if somebody there could help me with this problem?!

Thanks,
Ben"

View 1 Replies View Related

Migration MSSQL 2000 32-bit To MSSQL 2005 64-bit

Nov 17, 2007

I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.

Current Environment is MSSQL 2000 32-bit with current Service Packs.

I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.

I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.

Upgrade options:

1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.

View 3 Replies View Related

How To Handle A Null Guid As Parameter In Sql 2005

Jul 5, 2007

I have a web application. In some instances, I have a need to send guid parameter as null while making a sql query to SQL 2005. My question is as how to handle this null guid on .net and sql side.
Thanks! in advance.

View 2 Replies View Related

Conversion Of MSSql 2000 Database To MSSQL 2005 Database

Jan 18, 2008

How to convert a database in MSSQL 2000 to MSSQL 2005 database.Is there any tool or documentation available for this?

View 3 Replies View Related

VS 2005 + Sdf + Foreign Key

Mar 13, 2006

Hi



How do you add foreign keys in VS 2005 to a sdf file? I'm using
the server explorer, where I can add primary keys but no foreign keys.



What's the best free tool for editing sdf files? I can't use
publication, because I'm using SQL Express. Primework's DataPort
Component/Wizard don't seem to work for me.



Thanks!



Rudi

View 9 Replies View Related

MSSQL 2005 Vs. Visual Studio 2005 Service Pack 1

Mar 14, 2007

Hi,
for some reason, when I've installed visual studio 2005, I didn't install also SQL server.
Than I've updated VS with Service Pack 1 (thank god, I was trying unsucesfully for about 2 weeks :/ ).

Than I want to install MSSQL 2005 and an error came up:

Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
SQL Server Setup has detected that the following required component is not installed: Microsoft Windows Installer 3.1. To proceed, download and install the Windows Installer 3.1 Redistributable from http://go.microsoft.com/fwlink/?LinkId=50380 , and then run SQL Server Setup again.

1. The http link leads to main page of MS Download Centre.
2. I have Installer 3.1. (version of file c:windowssystem32msiexec.exe said so)
3. I really do not have any beta version of any mentioned SW. I never had.

So I think the issue could be, that installer is checking for not updated version of Visual Studio.
(I was searching through net/msdn and seems no one had this problem (maybe wrong keywords, though) ).

I'm running setup.exe from CD1.

Uninstalling of VS Service Pack 1 is not an option. I really don't want to spent another week by installing it.
Please tell that there is some another way :) .
Thanks a lot.

Here are some logs:

SQLSetup0001_COMP_Datastore.xml

<Datastore>
<Scope Type="SetupBootstrapOptionsScope" Id="2336">
<Property Id="QuietSwitchPresent">0</Property>
<Property Id="LogSwitchPresent">0</Property>
<Property Id="ErrorReporting">0</Property>
<Property Id="DeleteManifestFileMode">1</Property>
<Property Id="MultiInstanceEnabled">0</Property>
<Property Id="ComponentUpdateOnly">0</Property>
<Property Id="ReducedUI">0</Property>
<Property Id="PatchedSetup">0</Property>
<Property Id="LocalSetup">0</Property>
<Property Id="InitiateReboot">0</Property>
<Property Id="HostSetup">1</Property>
<Property Id="RemoteMode">0</Property>
<Property Id="Remote">0</Property>
<Property Id="LoosenedSccChecks">{ }</Property>
<Property Id="DisabledSccChecks">{ }</Property>
<Property Id="LocalRebootPending">1</Property>
<Property Id="CmdLine">********</Property>
<Property Id="InstallMediaPath">Y:</Property>
</Scope>
<Scope Type="SetupStateScope" Id="">
<Property Id="machineName">COMP</Property>
<Property Id="logDirectory">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG</Property>
<Property Id="logSummaryFilename">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt</Property>
<Property Id="logSequenceNumber">1</Property>
<Property Id="primaryLogFiles">{ ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_COMP_Core.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt"] }</Property>
<Property Id="watsonFailedAction">PerformSCCAction2</Property>
<Property Id="watsonFailedActionErrorCode">87</Property>
<Property Id="watsonFailedFunction">sqls::PerformSCCAction::perform</Property>
<Property Id="watsonFailedFunctionErrorCode">87</Property>
<Property Id="watsonSourceFileAndLineNo">setupsqlsetupactions.cpp@1390</Property>
<Property Id="watsonModuleAndVersion">setup.exe@2005.90.1399.0</Property>
<Property Id="watsonMsi">None</Property>
<Property Id="watsonMsiAndVersion">None</Property>
<Property Id="watsonSourceFile">setupsqlsetupactions.cpp</Property>
</Scope>
</Datastore>


SQLSetup0001_COMP_Core.log

Microsoft SQL Server 2005 Setup beginning at Wed Mar 14 18:23:08 2007
Process ID : 2336
Y:setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/2/14 18:23:8
Complete: LoadResourcesAction at: 2007/2/14 18:23:8, returned true
Running: ParseBootstrapOptionsAction at: 2007/2/14 18:23:8
Loaded DLL:Y:xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/2/14 18:23:8, returned true
Running: ValidateWinNTAction at: 2007/2/14 18:23:8
Complete: ValidateWinNTAction at: 2007/2/14 18:23:8, returned true
Running: ValidateMinOSAction at: 2007/2/14 18:23:8
Complete: ValidateMinOSAction at: 2007/2/14 18:23:8, returned true
Running: PerformSCCAction at: 2007/2/14 18:23:8
Complete: PerformSCCAction at: 2007/2/14 18:23:8, returned true
Running: ActivateLoggingAction at: 2007/2/14 18:23:8
Complete: ActivateLoggingAction at: 2007/2/14 18:23:8, returned true
Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result.
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2336" returned false.
Running: PerformSCCAction2 at: 2007/2/14 18:23:8
Error: Action "PerformSCCAction2" threw an exception during execution.
Return Code: 87
Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
SQL Server Setup has detected that the following required component is not installed: Microsoft Windows Installer 3.1. To proceed, download and install the Windows Installer 3.1 Redistributable from http://go.microsoft.com/fwlink/?LinkId=50380 , and then run SQL Server Setup again.

Class not registered.
Running: UploadDrWatsonLogAction at: 2007/2/14 18:23:9
Message pump returning: 87

View 2 Replies View Related

Sql 2005 Foreign Key Error

Jul 4, 2006

Lets say that I have a 3 tables: 1) Sku, 2) ReceiptDetail and 3) OrderDetail. In the last 2, is a Sku column which needs to refer to the Sku table. I create ForeignKeys in the ReceiptDetail & OrderDetail pointing to the Sku table as follows:
Alter Table ReceiptDetail Add Constraint fk_ReceiptDetail_SkuKey Foreign Key (SkuKey) References Sku (SkuKey) On Update Cascade On Delete No Action;
The first 'Alter' (for ReceiptDetail) works, but the second gives me the following message:
Introducing FOREIGN KEY constraint 'fk_OrderDetail_SkuKey' on table 'OrderDetail' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.
This worked in Sql Server 2000, but not 2005. I just wanted the Sku updated in the all other tables when updated in the main Sku table. I guess that I could use a trigger, but shouldn't need to.
 

View 2 Replies View Related

Converting SQL Express 2005 To MSSQL 2005 Database

Jul 14, 2007

Hello, im shure this must have been up before and i apologize for that. But i wonder if there is a way to convert the SQL server express databases to MSSQL 2005 databses?

View 3 Replies View Related

Populate GUID Column In Table B With Values From GUID Column In Table A

Mar 4, 2008


How do I update the OrderGUID column in Table B with Values from OrderGUID column in Table A. I have already populated the OrderGUID column in Table A using NEWSEQUENTIALID(). Now I need to populate the OrderGUID column in Table B with Matching GUID values from the OrderGUID Column in Table A.

Does any one have a script to accomplish this task. thanks

View 4 Replies View Related

MSSQL 2005

Feb 16, 2007

Hi Guys.If i didnt use MSSQL 2005 Express (say my database was bigger than 4 gig), what license would i need to get for the full version?I'm slightly confused with the CALS (who isnt?).If its on the same server and only IIS / asp.net accessing the database do I only need say 2 CALS?1 for read only1 for read / writewhich I then use ASP.NET to talk to the database?Or do I have to get a per processor license.I would appreciate any help  

View 2 Replies View Related

MySQL To MsSQL 2005

Nov 5, 2007

Hi!
How can i convert this code to work with MsSQL 2005?
/Tomas
 Partial Class skaalb
Inherits System.Web.UI.Page

Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim strConnectionString As String
Dim strQuery As String
Dim MyConnection As OdbcConnection
Dim myCommand As OdbcCommand


Dim path As String = Server.MapPath("~/album") & "/"
Dim albName As String = Trim(Replace(txtAlbum.Text, "'", "''"))
Dim folderName As String = Trim(Replace(txtAlbum.Text, "'", "''"))
folderName = Replace(folderName, " ", "_")


Try
If Not My.Computer.FileSystem.DirectoryExists(path & folderName) Then

My.Computer.FileSystem.CreateDirectory(path & folderName)
labelStatus.Text = "Folder <b>" & folderName & "</b> created!"

Dim Beskrivning As String = Trim(Replace(txtBeskrivning.Text, "'", "''"))

strConnectionString = "DRIVER={MySQL ODBC 3.51 Driver}; SERVER=xxxxxxxx; DATABASE=xxxxxxx; UID=xxxxxxxx; PASSWORD=xxxxxxxxx; OPTION=3"
MyConnection = New OdbcConnection(strConnectionString)
MyConnection.Open()
strQuery = "INSERT INTO tbl_albumet(alb_Namn, alb_Beskrivning, alb_Mapp) VALUES (?, ?, ?)"

myCommand = New OdbcCommand(strQuery, MyConnection)
myCommand.Parameters.AddWithValue("?", albName)
myCommand.Parameters.AddWithValue("?", Beskrivning)
myCommand.Parameters.AddWithValue("?", folderName)


myCommand.ExecuteNonQuery()
MyConnection.Close()


Else
labelStatus.Text = "Folder excist, pick another name!"
End If
Catch ex As Exception
labelStatus.Text = "Unable to create folder!"
End Try


End Sub
End Class 

View 1 Replies View Related

IDENTITY_INSERT In MSSQL 2005

Oct 29, 2007

Hi ,

I use MSsql server 2005 with the compatability mode set to 2000.One of the tables, has an IDENTITY Column.I need to restore a earlier backed copy of the table.So, i did the following :

set IDENTITY_INSERT MYTABLE ON

insert into MYTABLE(ID,NAME) values(23,'XYZ')

However, i get the following error :

[Error Code: 544, SQL State: S0001] Cannot insert explicit value for identity column in table 'MYTABLE' when IDENTITY_INSERT is set to OFF.

Can anyone tell me why the set IDENTITY_INSERT does not work ? I need to disable the IDENTITY, do the restore and then enable the IDENTITY again.Also, i need to be able to do this only thorugh SQL issued via JDBC.Please help.

Thanks,

View 3 Replies View Related

IDENTITY_INSERT In MSSQL 2005

Oct 26, 2007

Hi ,

I use MSsql server 2005 with the compatability mode set to 2000.One of the tables, has an IDENTITY Column.I need to restore a earlier backed copy of the table.So, i did the following :

set IDENTITY_INSERT MYTABLE ON

insert into MYTABLE(ID,NAME) values(23,'XYZ')

However, i get the following error :

[Error Code: 544, SQL State: S0001] Cannot insert explicit value for identity column in table 'MYTABLE' when IDENTITY_INSERT is set to OFF.

Can anyone tell me why the set IDENTITY_INSERT does not work ? I need to disable the IDENTITY, do the restore and then enable the IDENTITY again.Also, i need to be able to do this only thorugh SQL issued via JDBC.Please help.

Thanks,
Charu.

View 1 Replies View Related

MsSQL 2005 Query Help

May 30, 2008

Code:

Select id from tbl_account in Game_User DB

id is binary data


USE Billing
INSERT INTO tblUser (userId,cpId,userTypeId,userStatusId,gameServiceId) VALUES ('test','1','1','9','6') where userId = id from tbl_account

and

INSERT INTO tblUserInfo (userNumber,userId,cpId,userTypeId,userStatusId,gameServiceId) VALUES ('123','test','1','1','9','6') where userNumber = userNumber and userId = userId from tblUser



Im new when it comes to making SQL queries, so i need help badly.

Basically what i need the query to do is call from a DB "User" id where the id is in Binary data. from that i need it to insert into 2 other tables in the Billing DB.

the UserId needs to be the same in all areas, and when it inserts into tblUserInfo it has to pull from userNumber from tblUser after the rows are entered so that the userNumber in tblUser and tblUserInfo are the same.

Hopefully you can help. if any further information is needed please just ask and ill try to give as much as i know.

Thanks

David

View 2 Replies View Related

ODBC 3.x MsSql 2005

May 6, 2008

First off, Devshed is a great place to find information for development. I'm on here daily looking through threads, finding answeres

I'm building a backend for a program that uses msSql 2005 and ODBC .
I'm trying to insert into a table, and it is working, but i would like to find a solution to this error i get from the odbc trace:

Calc f54-5c4ENTER SQLExecute
HSTMT 00924A18

Calc f54-5c4EXIT SQLExecute with return code -1 (SQL_ERROR)
HSTMT 00924A18

DIAG [22018] [Microsoft][SQL Native Client]Invalid character value for cast specification (0)

when i try to insert a value of 0 (zero) into a column that is bound as a double it gives this error.

And one more thing:
if(retcode != SQL_SUCCESS | SQL_SUCESS_WITH_INFO)

shouldnt that work? (if Retcode isnot success OR success_with_info)

Any input would be greatly appreciated!
thanks

View 2 Replies View Related

UTF-8 Coding Of MSSQL 2005 DB

Mar 26, 2008

Hi List,I am searching franticly for a solution (or the procedure) to settingthe coding of a new DB to UTF-8. I can find no setting in the ServerManager, during creation of the DB, to influence this. Can someoneplease show me the way? Thanks--Shawn

View 3 Replies View Related

Setting Up MSSQL 2005

Nov 27, 2006

hi all,

My company has finally decided to go with MSSQL 2005.

now i havent used mssql since version 7.. which was a while ago..

whats the difference in terms of the setup and the easy of use ?

View 4 Replies View Related

How Do I Add Licenses To MSSQL 2005?

Mar 14, 2008

I've purchased and installed SQL Server 2005 along with some licenses and I now have a 'Microsoft Open License Confirmation Letter' in my inbox.

How do I add these licenses to SQL Server and get them active?

How do I check to see how many licenses SQL Server contains?

View 10 Replies View Related

From MySQL To MSSQL 2005

Dec 12, 2005

Hello! I'm installing the MSSQL 2005.

View 24 Replies View Related

MDF Database To MSSQL 2005

May 13, 2007

I'm pretty new at this so bear with med



I've made af site in Visual Web Developer. On that site i've made a database and it worked finde when I first uploaded it to my FTP as a database file on the server. But due to security problems, my web hotel host has deactivated that possibility. Så now I have to put my data and tables into the MSSQL 2005 Database the host uses. Now here's the problem.



1: How do I do that?



2: How do I get tha tables I've made i Visual Web Developer over in SQL Server Management Studio Express så that I can upload it?

View 6 Replies View Related

SSIS In MSSQL 2005

May 4, 2006

Currently exploring MSSQL 2005 and running into following problem:

I installed MSSQL 2005 Eval (version 9.0.1399) on Windows XP (strictly not supported). Installation runs oke, dbserver is up and now I want to export data from an Informix database instance. I created a test database and ODBC link, but when trying to copy tables, I run into following error:

Could not set up data flow connections... The connection type "OLEDB" specified for connection manager {very long registry key} is not recognized as a valid connection manager type.

This message can be okayed, but then following error pops up:

The connection "DataReaderSrc" is not found.

In the report, following details:

Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)

- Setting Source Connection (Error)



Messages

The connection "DataReaderSrc" is not found. This error is thrown by Connections collection when the specific connection element is not found.
({7574B30E-EF48-4B53-BA5C-40F2B66C332E})


- Setting Destination Connection (Stopped)

- Validating (Stopped)

- Prepare for Execute (Stopped)

- Pre-execute (Stopped)

- Executing (Stopped)

- Copying to [Gerrit].[dbo].[orders] (Stopped)

- Post-execute (Stopped)

- Cleanup (Stopped)

Does anyone know what to do?

Thanks,

View 4 Replies View Related

MSSQL 2005 Beta Error

Feb 6, 2006

Hi. I have a strange problem. ASP.NET pages works, but when I try to estamblish a connection, I get an error: Shared Memory Provider:Connection was terminated pointing to Connection.Open();.I must say that this same code has worked before and I have some Windows App that works (connects to a the same MSSQL), and ASP.NET pages don't.I've tried to Disable the Shared memory from SQL Configuration Manager, but no luck.The only thing that I've notice is that when I go to IIS Manager and click properties on web site properties and under the ASP.NET tab i combobox I don't have anything, just empty combobox.I repeat that ASP.NET pages working, only when I want to contact the database, error raises.I've tried to instal framework again, hoping that combobox wan't be empty, but it's still the same.Please, help me with this. Iam getting desperate and a little bit angry most of all because this same code has worked before.Thanks.

View 3 Replies View Related

Special Character '[' In MSSQL 2005

Nov 7, 2007

Hi,

I am using MSSQL 2005 with the compatability mode set to 2000.Now, one of my String columns in a table has data in the following format:

ABC[123][XYZ]

Now issuing the following SELECT query in the table does not work :

Select * from TAB1 where col1 like 'ABC[%'

ie, no row gets selected.However, the following query works:

Select * from TAB1 where col1 like 'ABC%'

Looks like '[' is a special character :( Now, how do i work around this so that i can select strings starting with "ABC[".Please help.

Thanks.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved