I have a data file, call it Data.mdf, that I am accessing through Visual Studio. It does not show up in SQL Server 2000 Enterprise Manager.
How can I get it assigned to, or imported into, the local server so I can manage it?
Thanks
Glen
After i reinstall SQL Server 2005 Express on my local machine, and then tried to attach AdventureWorks_Data.mdf into Database, it gives me the following error:
Mark up:
I tried to reinstall the Adventureworks.msi installer and reattach again in SQL Server 2005 Express, it gave me the same error.
I then deleted both SQL Server 2005 Express & Adventureworks, and then restart my pc and reinstall again, it still gave me the same error.
Error:
Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum)
Additional Information:
An Exception occurred while executing a Transact-SQL Statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1DataAdventureWorks_Data.mdf' (Microsoft SQL Server, Error:5123)
In SQL Server 2000, I would like to attach a Database that is the file of the Database on another system. I made a copy of my Client's Database at his site. Now I would like to attach it to my server and then copy the data from my Client's DB to mine.
The only problem is they have the same file names, so when I try to attach the copy I get an error message. Is there any way to change the name of the data file and log file that a database points to so that I can attach it to my Server?
Thanks in advance for your help!
Hi All,
Can any body tell me that how we can attach IDENTITY property to an existing int column
Normally we create a new table for tabler partitioning, like:
Code Snippet
CREATE TABLE [dbo].[Sales]
(
[SalesID] [int] IDENTITY(1,1) NOT NULL,
[SalesDate] [datetime] NOT NULL,
[col_01] varchar(50) NULL,
[col_02] varchar(50) NULL,
..
) ON [ps_Sales](SalesDate)
GO
with
Code SnippetCREATE PARTITION SCHEME [ps_Sales]
AS
PARTITION PFN_Sales TO ([FG_20080501], [FG_20080516], [FG_20080601], [FG_20080616],
[FG_20080701], [FG_20080716], [FG_20080801], [FG_20080816],
[FG_20080901], [FG_20080916], [FG_20081001], [FG_20081016])
But what if I have [dbo].[Sales] existed in db, that have attached to [PRIMARY]?
Alter table?
or I need to create a temp table first?
Hi
I am very inexperienced with the Administration side of SQL Server 2005.
I have been given a .bak file which I need to restore onto my SQL Server. The database .bak file was created on another PC and I cannot seem to restore/recover the .bak file onto my SQL Server.
Can anybody help me with this?
Thanks!!
Dear All,
We have a DB on sql server 2000 64 bit and the build is 2187.
The database consisted of two transaction log files and several data files at the time we took backup. However, the backup taken was a cold backup (backup of files through OS). In this backupset, one transaction log file was skipped due to some error...... Now I want to restore the database for referring to some history data. Will I be able to attach the database with all MDF and one of the transaction log files.??
I heard this kind of recovery is not possible. If anybody can post some solution , I would be grateful...!!
Regards,
Chetan
Hi
I have new bought the SQL server 2005 enterprise, but it have 2 CDs, so what are the differences between CD1 and CD2? and so which one should i install first? or is it necessary to install both two or just need to install one of them?
And about my original sql 2000 database, can i just attach it's MDF file into the sql 2005 engine, or which import wizard can load the sql 2000 MDF into sql 2005? or do i need to keep the sql 2000 engine before do this?
thx
I had few databases developed in SQL Server 2005 Developer Edition. I have detached all the databases and stopped developing anything new other than taking reqular backup of detached .mdf and .ldf files. I installed Vista on the other Hard drive that corrupted my XP installation drive letters so I had to reinstall XP OS. I have reinstalled SQL 2005 Dev edition. Now I am trying to attach the database it is giving error of Operating system error 5: "5(Access is denied.)". I tried to copy those .mdf and .Ldf files through windows explorer and it is not letting me copy past in the other place. I am getting Access denied from OS. I have about 5 databases and only one has this problem.
What is going on and how do I solve this? Is the OS has locked the file? My home computer is not in a domain. I tried to right click the file to see if I can set access permission on the file. There is no such security options. Any help is appreciated.
Thanks,
Vijay
I have a an asp.net application running under IIS. this application is using two folders, the virtual directory under C:Inetpubwwwroot and the application phisical folder at C:.
I want to manage this applications .mdf database using microsoft sql server management studio express(iam running sql express with advanced services) which means i have to attach the database to Ms sql server managemet studio express tool.
What i dont know is if i should attach the .mdf file in the physical folder's App_Data folder at C:myapplicationFolderApp_data or the .mdf file in the virtual directory under C:InetpubwwwrootMyapplicationFolderApp_Data
I dont know which of the two i should attach. Where exactly is the running database, the .mdf file in the physical folder or the .mdf file in the virtual directory under wwwroot.
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Any way I can recover it?
Thanks.
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
mdf file size 5,738,944 KB
ldf file size 10,176 KB
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.
View 4 Replies View RelatedI am using the following C# code to establish a SQL connect to a SQL database file:
// connection string
// attach a SQL database file to a local SQL server express instance
string _connectionString = @"Server=.SQLExpress; AttachDbFilename=C:BalanceDatabase_1.mdf; Trusted_Connection=Yes; User Instance=True";
// using System.Data.SqlClient;
SqlConnection _sqlConnection = new SqlConnection(_connectionString);
// open the connection
_sqlConnection.Open();
// do something
// close the connection
_sqlConnection.Close();
So far, the connection works fine.
However, next, I want to copy the database file to another folder. So the following codes:
// source database file name
string sourceDatabaseFileName = @"C:BalanceDatabase_1.mdf";
// target database file name
string targetDatabaseFileName = @"D:BalanceDatabase_1.mdf";
// copy database file
System.IO.File.Copy(sourceDatabaseFileName, targetDatabaseFileName, true);
Then the program came with runtime exception: "IOException was unhandled: The process cannot access the file 'C:BalanceDatabase_1.mdf' because it is being used by another process."
Is it because the database file was sill attached to the local SQL Server express instance? What can I do to bypass this problem? Detach the database file? or dispose the local SQL Server express instance?
Many thanks indeed!
I have a huge MDF File - 120 GB File (Had setup as 1 MDF initially) -- Did not anticipate that the DB would grow to that size!!
Anyways.. I heard that the general performance woul grow if i had them as "File Groups"..
Is there anyway - to split the existing MDF file into Mutliple files as a File Group?
Where should i start? Can someone please direct me..
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
good morning,
I want to load data that i receive everydays from my customers in .xls file format (excel) or cvs file format, to the database that i have created on this purpose. but when trying to do that whith SSIS; i got an error message .... that i can't import redudant data in my database column.
Best regards.
I am not sure if this is possible or not, but I have to at least ask.
I have a SQL Reporting Services project that has a QA server version and then a Production server version. So when requested changes are made to the reports, I make the changes in Visual Studio and then push to QA. After the changes have been tested and approved, I then push the changes to the Production server.
I have come across an issue, where requested changes were made in Visual Studio (a lot of changes), and pushed to QA. The users now have changed their minds and they want instead to stay with what is in production. So, I am looking for a way to recover the report file on the production web server, bring it back into my visual studio project to replace the report that I had changed.
Is this possible, or will I have to start over and step one and reverse the changes in Visual Studio.
Let me know.
Thank you,
T.J.
RESOLVED RESOLVED RESOLVED
DOH! When I rebuilt the OS, I changed the data partition ID's, and didn't remember to change them in the connetion strings
Not great, but better than continuing to bang head against wall.
Would like to say to MS appreciators that the VS2005 reinstall actually went quite well, considering.
===========================================================================
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
The Connection strings are all of the form
connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=(specific file string).MDF;Integrated Security=True;User Instance=True"
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
how can i attach the mdf file with a corrupted/deleted Log file
my log file is deleted how can i attach the mdf file
In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this:
1. If no file(s) found, stop executing and send email saying no file(s) found;
2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1:
----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.VisualBasic.FileIO.FileSystem
Imports System.IO.FileSystemInfo
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String
Dim cFileType As String
Dim cFileFlgVar As String
WriteVariable("SCFileFlg", False)
WriteVariable("OOFileFlg", False)
WriteVariable("INFileFlg", False)
WriteVariable("IAFileFlg", False)
WriteVariable("RCFileFlg", False)
cDataFileName = ReadVariable("DataFileName").ToString
cFileType = Left(Right(cDataFileName, 4), 2)
cFileFlgVar = cFileType.ToUpper + "FileFlg"
WriteVariable(cFileFlgVar, True)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
End Class
example for step 2:
-------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
'Set the properties like username & password
cm.Properties("ServerName").SetValue(cm, "ftp.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0") 'The 0 setting will make it not timeout
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
'create the FTP object that sends the files and pass it the connection created above.
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
'Connects to the ftp server
ftp.Connect()
'ftp.SetWorkingDirectory("..")
ftp.SetWorkingDirectory("directoryname")
Dim folderNames() As String
Dim fileNames() As String
ftp.GetListing(folderNames, fileNames)
Dim maxname As String = ""
For Each filename As String In fileNames
' whatever operation you need to do to find the correct file...
Next
Dim files(0) As String
files(0) = maxname
ftp.ReceiveFiles(files, "C: emp", True, True)
' Close the ftp connection
ftp.Close()
'Set the filename you retreive for use in data flow
Dts.Variables.Item("FILENAME").Value = maxname
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
I have MS SQL server database with two files
1- x_data.mdf, 2- x_log.ldf
The database become suspect and i have no space problem.
now the problem is that the log file become corrupted because when i stop the database service I tray to copy the log file into another place but I can't
Now the result is that I have one data file x_data.mdf and how can I solve the problem
and the question is how can I back the data again when I have a data file without a log file
Thanks
I'm in a BIG BIG trouble...
A co-worker tried to help me out with the huge database huge log file.
So he first detach my db, and deleted the log.ldf file...
now, i tried to attach it back....ERROR...
could someone help me out ... please..
!_! Crying Nyssa.
Hello Experts, How Can i Attach and Detach my MDf file to an instance of SQL server 2005 Programatically or by T-SQL :)
ElmasryA1
Is it possible to attach sdf file (SQL Server Compact Edition Database File) to sql server 2005 ent. edition?
Thanks in advance.
Hi all,
I have "SQL Server Express" as well as SSMS-E installed on the same machine. I am trying to get SSMS-E to connect to a database (i.e., an .MDF file) that resides in a folder on the desktop.
After establishing a connection to my "SQL Server Express" instance within SSMS-E, I right-click on "Databases", in the "Object Explorer" window and select "Attach..." and click the "Add..." button. The resulting dialog box opens in the directory:
"C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" where I see several MDF files. But as I said, my MDF is not in this directory - it's on the desktop.
If I try to navigate to the proper directory on the desktop I see no MDF files. In fact, I cannot even navigate past my username -- that is, I cannot even navigate to the desktop, let alone folders on the desktop. I don't know why.
Of course I *could* put the MDF file in the SQL-E approved directory but shouldn't I just be able to navigate to it using SSMS-E? Incidentally, I *AM* able to connect to the database on my desktop if I use Visual Studio and I specify "UserInstance=true". Not specifying "UserInstance=true" results in this error:
An attempt to attach an auto-named database for file C:Documents and SettingsRobinDesktopMyCompany.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Can someone explain what might be causing the problem with SSMS-E, and, for that matter, why it's necessary to specify "UserInstance=true" in Visual Studio?
Thanks so much. I hope these are not too many questions.
Robin
In my script task I have the following code. The task I'm trying to accomplish is:
If the filename on FTP can be found in the local archive folder of e: drive then show message "FileAlreadyThere" (I will ultimatley change it to do nothing); if the filename on FTP cannot be found in the local archive folder of e: drive then transfer the file to the local package folder on d: drive.
While the script task is executing I was watching it closely, but the problem i saw is that:
If some files on FTP are already in local archive folder and some are not, then it the files which are already in the archive folder are dumped to the package folder; then after that the files which are not in the archive folder are then dumped to the package folder. But I only want the new files on FTP to be transferred to the package folder for further processing.
Then after this is finished, I saw all the files in the package folder are refreshed one after another, after the first round of refresh the second round starts, after the second round finishes it then stopped. I saw it refreshes itself because the 'Date Modified' of the file changes. And I saw the script task turned green.
I don't see how the code below produced this result. Something is wrong in the logic of the loop? Anyone has any idea why it's behaving the way it is now? And how to change the code to accomplish what I want? Thanks a lot!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Imports System
Imports System.IO
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
cm.Properties("ServerName").SetValue(cm, "ftp2.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0")
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
ftp.Connect()
ftp.SetWorkingDirectory("/directory")
Dim fileNames() As String
Dim folderNames() As String
ftp.GetListing(folderNames, fileNames)
If fileNames Is Nothing Then
MsgBox("NoFileOnFTP")
Else
Dim fileName As String
For Each fileName In fileNames
If File.Exists("c: emp" + fileName) Then
MsgBox("FileAlreadyThere")
Else
ftp.ReceiveFiles(fileNames, "c: emp", True, True)
End If
Next
End If
ftp.Close()
End Sub
End Class
Hello Professionals, How can i attach and detach my mdf file to an instanse of sql 2005 programatically or by T-SQL
ElmasryA1
Hello,
I have Sql Server in one pc and I want to attach one databse that is in another computer that doesnt have SQL Server. Sql Server doesnt permit UNC path when attaching database files. Is there anyway to workarounf this. Is Trace Flag 1807 of any use?
Thanks
I got a mdf file from my co-workerwho just stopped SQL server and delete ldf fileand give me a mdf file.if it was detached, it would work finebut it was just copied.Is there any way to attach this mdf file?I tried sp_attach_db and sp_attach_single_file_dband both failed.thanks,
View 4 Replies View Related