How To Calculate Database Size
Nov 6, 1999How to calculate database size ?
When u setup e-commerce site for selling product then
how to calculate datbase size ?
Navnit
How to calculate database size ?
When u setup e-commerce site for selling product then
how to calculate datbase size ?
Navnit
Hi all,
please show me the way how to calculate the size of a database in SQL 2000. Whith this size we have already calculated, how much space need to make a backup file for this database.
thanks.
I need to build a query to calculate the size of all tables in a database ...
View 5 Replies View RelatedHi all!
How can I calculate the combined table size for the following:
The Destination and the ShipmentWages tables on a database of a courier service have approximately 10,000 rows and 15,000 rows, respectively. The average row size of the Destination table is 4KB and that of the ShipmentWages table is 3KB.
Thanks,
ndba
this is the table i have created .
CREATE TABLE [dbo].[Table] (
[BCode] [varchar] (3) ,
[RefNo] [varchar] (12) ,
[RType] [varchar] (2) ,
[TheirRef] [varchar] (50) ,
[Amount] [money] NULL ,
[AccountNo] [varchar] (20) NULL ,
[EnteredDate] [datetime] NULL ,
[EnteredBy] [varchar] (6) ,
[IsTrue] [varchar] (1) ,
[RDate] [datetime] NULL ,
[Details] [varchar] (255) ,
[PostBy] [varchar] (6) ,
[SeqNo] [int] IDENTITY (1, 1) ,
[ThisCode] [varchar] (3) ,
[VDate] [datetime] NULL ,
[Id] [varchar] (20) ,
[Flag] [varchar] (1) ,
[TDate] [datetime] NULL ,
[Type] [char] (1) ,
[SerialNo] [int] NULL
) ON [PRIMARY]
GO
if i insert a single row in a table with values :
INSERT INTO [Table]
SELECT '100','1','DD',1000000,'999999000',
'2008-01-29','sa','F','2008-01-29','PARTIAL DATA','11502',
'101','2008-01-29','ABC1111111','T','2008-01-29','S','11204'
EXECUTE sp_spaceused 'Table'
name | rows |reserved | data |index_size | unused
[Table] | 1 |16KB | 8KB | 8KB | 0KB
i couldnot understand
i) how the system calculate this 16 KB and 8 KB ?
ii) if i changed the VARCHAR(255) to VARCHAR(50) ,will there be difference in size of the table ,if so then how ?
iii) how can i see the change in size of table by reducing the size of datatype ?
can anybody help me ?
I want to calculate average row size of a record. By based on this i want to add some more columns into an existing table. Here is my table structureCREATE TABLE patient_procedure( proc_id int IDENTITY(1,1) CONSTRAINT proc_id_pri_key PRIMARY KEY, patient_id int NULL, surgeon_name varchar(40) NOT NULL, proc_name varchar(20) , part_name varchar(30), wth_contrast int , wthout_contrast int , wth_wthout_contrast int, xray_part varchar(60), arth_area varchar(30), others varchar(30) , cpt varchar(20) , procedure_date smalldatetime NOT NULL, mraloperrun varchar(20),CONSTRAINT patientid_foreign_key FOREIGN KEY(patient_id) REFERENCES dbo.patient_information (Patient_id)) Now i got a requirement that i have to add two more procedures with different columns.The columns overall size is 195 bytes.I can place those two procedures as seperate tables. I dont want to do that becuase of front end requirements.Here the problem is when the user enters these two procedures information remaining fields will store the null value. I know that when we store the null values into corresponding columns min of 1 byte will be occupied. Please suggest me that shall i include these columns into the above table. If i add these columns is performance will be decreased or not. Waiting for valuable suggestions.
View 2 Replies View RelatedI am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
View 4 Replies View Related
How can i do the following:
Calculate the size of a varbinary(max) field or variable
Calculate the average of a varbinary(max) table column
I am using SQL 2005
Thanks for your posting
I have a client with no backup of MASTERdb or Help_rev_devices, all I have is a couple of .dmp's of the production data. In order to run DISK REINIT I need to know the size of the database, is there any way of finding out the size of the database device, if all you have to go with is a backup dump file?
I know it won't be pretty.
`Ken
What is the easiest way to calculate the space (size in bytes) used by a BLOB column that is already stored in a particular row?
Thanks.
I need find out the number of columns in flat file before i process that particular file.
I have file name in @filename variable and file path is @filepath variable.
But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And I am using for each loop container to read the file one by one and put the file name in @filename variable.
and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
My file structure is:
ID,Name,City,Country,Phone
1,Riya,Pune,India,454564
2,Jiya,New Jersey,India,454564
3,Riya,St Louis,USA,454564
4,Riya,Belleville,USA,454564
5,Riya,Miami,USA,454564
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file. if it is not there then i have to send mail to client saying that file is not valid.
Let me know how i will do it.I need to also calculate the size of flat file.
I receive Error: 3967, Severity: 17, State: 1. Insufficient space in tempdb to hold row versions. We have 8 data files for temp db of 10210 GB size and given 10240 GB as max size.
As MS suggest to calculate the temp db file size and growth rate we need to monitor the perform counters Free Space in Tempdb (KB) and Version Store Size (KB) in the Transactions object.
basic formula: [Size of Version Store] = 2 * [Version store data generated per minute] * [Longest running time (minutes) of your transaction
My report disk utilizations says tempdb is full ? I thonk I need a shrink for the file .
Still I am confused in calculating the size , My perform counter gives me data as such
Free Space in tempdb (KB)Â Â Â Â Â Â Â Â Â Â Â Â Â Â 279938496
Version Generation rate (KB/s)Â Â Â Â Â Â Â Â Â Â 53681040
Version Cleanup rate (KB/s)Â Â Â Â Â Â 53422320
Version Store Size (KB)Â Â Â Â Â 258720
Version Store unit count      22
Version Store unit creation                     774
Version Store unit truncation        752
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end
and in the second Temp Table, I have
select
,GrpSize=sum(grpsize)
,NoofGrp=count(distinct grpsize)
From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
Hi,
i use this script that show me the size of each table and do the sum of all the table size.
SELECT
X.[name],
REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows],
REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved],
REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data],
REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size],
REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused]
FROM
(SELECT
CAST(object_name(id) AS varchar(50)) AS [name],
SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows],
SUM(CONVERT(bigint, reserved)) * 8 AS reserved,
SUM(CONVERT(bigint, dpages)) * 8 AS data,
SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size,
SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused
FROM sysindexes WITH (NOLOCK)
WHERE sysindexes.indid IN (0, 1, 255)
AND sysindexes.id > 100
AND object_name(sysindexes.id) <> 'dtproperties'
GROUP BY sysindexes.id WITH ROLLUP) AS X
ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup.
example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when
i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
THX
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
I execute the following SQL, and return 3 records, I want to know how many disk space the 3 records use, how can I do? thanks! select * from myTable where username='Paul'
View 6 Replies View RelatedHi,
I am using
exec sp_helpdb
go
dbcc sqlperf(logspace) for
getting database size and log size. Is this gives the correct
database size and log size or Is there any other way to get the logsize and database size by means of query analyzer.
Thanks in Advance.
Seenu. S
I'm getting this error while trying to insert records into a SQL Server Compact Edition database. I have pasted my connection string that was used when creating the database as well as for accessing that same database from my Windows application.
Thanks for any help any of you can give!
Data Source=OnTheGo.sdf;Encrypt Database=True;Password=<password>;Max Database Size=4091
Hello,
I am developing a smart device application with Visual Studio .Net 2005 and SQL Server Compact Edition database. And also using merge replication to synchronize the data from the mobile device to the SQL Server.
My database size is around 350MB. So when I am trying to synchronize this is the error message that I get.
" The database file is larger than the configured maximum database size. The setting takes effect on the first concurrent database connection only.[Required Max Database size ( in MB; 0 if unknown)=129].
I tried changing the Max database size in the connection string and my connection string looks as follows and still did not have any luck.
connstr= "Data Source=Storage CardItems.sdf;Max Database Size=500;"
Any help regarding this would be appreciated.
Thank you
.
hi
my database on remote server i cannot access directly.
i can access it only with query analyzer.
my log file size is 9mb but nothing in database. only few tables there so how i can reduce log file size with query.
thanks
Is it possible to get the SQL Server database size programmatically?
I have an WEB application in c# ASP NET, but I can found any information about.
Thanks for your attention
Freedeveloper
We have a SQL server database most time for read only because the data source comes from another database( which is not SQL server database, now it is about 2G). Every day we have a job running as following:
Step 0. extra the data from another database, and create plain text files for each table for BCP job.
Step 1. drop all of the index
Step 2. truncate all of the tables.
Step 3. BCP in all of the data from plain text file.
Step 4. create all of the index again
Step 5. shirnk the database.
Everything runs fine but the database grows 1 G from yesterday's database. I am sure we do not have so much data entry in one day.
Any one can give some suggestion?
I wonder if I need do shirnk the database or shirnk the data file before create the index.
How can know how much size for all of the index file?
Thank you very much.
Judy
I am a beginner with sql and I have been inputting data (txt files) to my database and now have approached 4GB in size and it will not let me expand any further on the primary file group. My 'boss' said that sql has no size. I am using desktop
View 4 Replies View RelatedIs there a stored procedure that returns the current size of a database, and the maximum size of a database whose growth property IS NOT set to unlimited?
TIA,
Chris
Just wondering if anyone knew the maximum size of a database that SQL Server 7 can handle.
joe
When I run sp_spaceused on my database it give me a total size of 258MB
The backup of this database reads 226MB
The Properties screen tells me that my data is a total of 278MB
I am running SQL 7.0 .
Why am I getting different sizes?
I have a simple question, why Am I running out of space with my current 3.5GB database, I am constantly expanding it, yet when I dump the database nightly the dump is just around 1.5GB?
View 1 Replies View RelatedNewbie here ....I started with a datbase of 90 megs...it now grew to 300 megs in 2 months...what is the best way to see the largest table or to find out why this database grew so fast? Thanks!
View 3 Replies View RelatedHi..
My database data file are over 2.1 Gbs now. can anyone tell me is my data file too big?? or not safe?? or there's a limite for MSSQL 2000. my last choice are move some data to another database. but i have consider the report i have to make. so i really dont want to do that. can anyone advice. thanks
Hi,
I have 30 servers and about 600 databases. I want to know the size of databases ( data files as will log files) both used and allocated space.
Can any one tell me the easiest way to get this information?
Thanks.
Hi all,
We are using sql6.5. srvpack 3.
I noticed that one of our database was maxed out, and increased the size of the device and then increased the size of the database.
when I checked the database it is still showing the database is maxed out. I did it twice, it still shows that the space has been used.
Can anyone please explain to me why this is happening and how to get the actual space measurement.
Thanks in advance.
After we ran sp_spaceused on one database, the size for the UNUSED column is a negative number -1324KB. Can someone explain how this could happen? I really appreciate.
View 1 Replies View RelatedHi,
I need to check the log size of my database periodically and send a notification if the size exceeds 8 GB. I want to set this up as job that runs every 30 minutes or so and page the DBA if it exceeds the above said limit. Can anyone give me the command which can be used to obtain the logsize into a variable. I am new to SQL and would appreciate your expert advise.
Thanks,
Marcus